Application c# does not start if the tiara is not installed on the computer

Similar Questions

• CC Adobe Application Manager does not install / launch

  I was getting an error message on my application manager when you try to update. I fixed that on my iMac by uninstalling it and then put it back.

  So I tried the same thing on my MacBook, but now it seems to have messed up things. Installation * appeared * to succeed in the sense that the completed progress bar (I tried 3 times) but I have not received any notification at the end and the app is a not run by itself.

  Also, I can't find the icon of the application anywhere, and if I look into the applications folder, all I get is this dubious group of files / folders and nothing for the launch (see below)

  Does anyone else have this problem?

  

  You can download desktop creative cloud applications and use, Adobe application manager is the old version now.

  Click to download: Creative Free Cloud | Download the free trial version Adobe Creative Cloud

  -Pierre

• test for DPS application to v32, the ipa file does not install on the iPad

  revised to v32, DPS SE application test does not install on the iPad using iTunes to synchronize the ipa file.  The icon is grayed out, and it just says 'installation', but does not end. Folio test OK in Adobe Content Viewer. Try to get this right for v32 and iOS8

  This means that you have used a .mobileprovision file that is not your UUID in there device. Make sure you use the right .mobileprovision file, and your device UUID has been successfully added to him.

  Neil

• my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.

• Lsass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found

  Original title: oleaut32.dll xp

  My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
  Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
  However, I can't in the operating system to do a re-install.
  Any suggestions?

  If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:

  Lsass.exe - Unable to locate component
  This application has failed to start because the OLEAUT32.dll file not found.  Reinstalling the application may fix this problem.

  If the missing file is the only problem, you might have to do a reinstall to fix.

  There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.

  Once started in the XP Recovery Console, you must enter this command at the prompt:

  Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32

  If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:

  Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32

  Answered in the affirmative if invited to replace any existing file.

  I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you.  I think that the MSE is just throw a few things to try and some links.  You don't describe symptoms consistent with the need to use one of these methods.   I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.

  If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).

  Here's how:

  Boot into the Recovery Console Windows using an XP bootable installation CD.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• The application icon does not

  The application icon does not appear on the home screen.  I managed to deploy to using javaloader and Office Manager because it comes in Options-> advanced-> Applications, and I am able to uninstall it via Desktop Manager. It is only fair that the icon does not appear.

  If it's important, I'm using controlled BlackBerry API.  I received and installed the keys with success.

  Any ideas?

  Edit: I use the Eclipse Plugin Windows XP, OS 4.5

  I don't know what the problem was, but I solved it.  I just created a new project of BB starting from zero and copy and pasted my code and rebuilt.  Works fine now.

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• Have dwnloaded Firefox, but invites to drag in the applications folder does not

  Downloaded Firefox, but invites him to drag the icon to the applications folder does not occur. Please notify. Thank you

  If the disk image file is not opened automatically, then you must open the DMG file yourself.

  Open the Firefox disk image file and drag the Firefox program into the Applications folder on your hard drive.
  Do not double-click the Firefox to run from the disk image, but instead, drag it out of the DMG file.

  • http://KB.mozillazine.org/Installing_Firefox#Mac_os_x
  • https://support.Mozilla.org/KB/installing+Firefox+on+Mac

• I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  Can she be seen by disk utility (and which version of Mac OS X is)

• 500 the application author does not match the author token of debugging

  My name is Jean-François Geyelin. My application name is PewPew.

  When you try to run PewPew on a playbook, I get the error "500 the Application author does not match debug token author.":

  the command deploy blackberry - installApp-password abdelkader 192.168.1.37 - package device-Debug/PewPew.bar returns:

  Info: Send request: install
  Info: Action: install
  Info: File size: 3575023
  Info: installation...
  Info: Treatment 3575023 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 500 the Application author does not match debug author token.

  I did check the following:

  the blackberry-nativepackager - listManifest PewPew.bar command returns (among others):

  Package-author: Jean-Francois Geyelin

  Package-author-Id: gYAAgPqb4i9DBQ-DjR0zWsAWK8s

  blackberry nativepackager - listManifest library/Research\ In\ Motion control / debugtoken1.bar returns (among others):

  Package-author: Jean-Francois Geyelin
  Package-author-Id: gYAAgPqb4i9DBQ-DjR0zWsAWK8s

  What should I check or what is the problem?

  
  

  Problem solved by clearing and forwarding of the token of the device debugging.

• The application name does not change in 2.0 WebWorks

  Hello

  I changed the name of the application in the config.xml file in the www folder. But when I reinstall the application again, the application name does not change. Removal and installation of new but certainly not it's always the same thing with the default name which is «WebWorks app» What is the problem? I couldn't change it.

  Thank you.

  Hello

  It is a known issue with version beta. The name and the icon is changed in the file of the bar, but persists on the device. If you have to deploy the same file on another device appears the correct name.

  The solution is to change the code of the widget as well.

  This will be fixed in the Gold release.

• Application module does not record the client interface

  Hello.
  
  The problem is that the application module does not record the client interface that is automatically generated classes.
  
  Whenever I go to the module of the application and add them, they will be gone next time I open the workspace. Is this a known bug or is there something that I am missing?
  
  I use jdev 11g relsease 2 version 11.1.2.3.0.
  
  Please help, because I can't get anything done.
  
  TIA

  Possible cases:
  -There is something wrong with the method you created.
  -The return type does not match

• My printer is configured to start when the computer turns on. I want to reconfigure it so that it does not turn

  My printer is configured to start when the computer turns on.  I want to reconfigure it so that it won't turn.  I know this is probably a simple change, but I can't find the path anywhere.  Any help?

  I guess you do NOT mean that you have both printer and computer plugged into the same power strip and both are turn on when you turn on the power strip.

  As nearly as I can determine the rather thin material in the Guide for the Dell P713w user, probably have enabled "Eco-Mode" or the mode 'sleep '.  See page 19 of the User Guide (if you don't have it, download it here: http://support.dell.com/support/edocs/systems/PRN_P713w/en/index.htm).

  When this feature is enabled, the printer goes into mode low power when it has been idle for a while.  When the computer is off, the printer is by definition inactive and so will go to low power, shortly after that the computer is turned off.  When the computer is turned on, it detects the presence of the printer and connects to the printer.  Apparently, the printer interprets this string as the "no-idle" and out of his low-power mode, which appears as if it is "turn on."

  In addition, this printer performs an automatic maintenance cycle every week if it is plugged into a power outlet. It will briefly exit Power Saver mode or turn on temporarily if it is disabled.

  At least one of the lights on the printer flashes power on and off when you think that the printer is turned off?  If so, it is in energy saving mode.

  Of course, I may be totally wrong, but it seems to me if you actually turn off the printer by pressing the button on / off on screen, he should not be able to auto (except once / week maintenance cycle).  From the Manual:

  Note: When the printer is turned on, press [power] to switch to the power saving mode. Press and hold [power] for 3 seconds to turn off the printer.

• Manager of Application CC does not load apps

  My application manager does not load apps. He is just saying "Applications loading...". "I tried, stop, reboot, uninstall/reinstall. I just download Dreamweaver but can actually get to the apps. I have connected online and a shot start downloading in this way, but it passes just to the application manager that is unresponsive. Help?

  [Moved from the endorsement, general, all Adobe forums Lounge for a specific support by product - moderator forum]

  Sorry, it took me a few days to get back to you. Busy week!

  Hmmm... uninstall programs Adobe does not is not something I've encountered. It is possible to run the Creative Cloud to solve installation problems cleaning tool could help, but it can be also quite simply time for individualized technical troubleshooting so you don't waste hours of work more. To this end, I recommend you Contact customer via chat. Make sure that you are connected with the identifier Adobe associated with your subscription to the CC.

  If the cat is able to help find a solution and you is not afraid to take a few moments to share, please let us know by responding to this discussion. I want to understand what is causing the problem.

• Adobe Application Manager does not display that Acrobat Pro XI is installed when it was

  Adobe Application Manager does not appear that Acrobat Pro XI is installed when it was installed by the Adobe Application Manager. I tried clicking on the button in the application manager Adobe who installs the program again and gives a key to launch the installation program. But the next time Adobe Application Manager starts, it said: Acrobat Pro XI is not installed, when it was installed (and working). I am a subscriber of creative cloud on the Mac (MacOS 10.8.3). platform Adobe Applicationa Manager is version 7.0.0.324.

  How can I get Adobe Application Manager to show that the program Acrobat Pro XI is installed?

  Thoughts?

  -john

  I tried the suggestion Greg_M #1 first - without success. Then tried the suggestion #2 of Arpit - also without success. However, I discovered that the uninstall program running in 'Applications-> Utilities-> Adobe Installers folder' had not removed the file Acrobat Pro XI (he was still in his file in the Applications). Finally, what worked manages the uninstall program that was in the folder ACROBAT PRO (NOT the utililites folder). When I ran the uninstaller program, I had also ticked the box in preferences to delete (not sure if that matters).

  All is well now. When I run Adobe Application Manager it says correctly that Acrobat XI is "installed".

  Greg and David thanks for your help/suggestions!

  -john

• Satellite P50-B-103 - Cyberlink Powerdvd does not install the update from Toshiba

  So I have an update for my toshiba Satellite P50B-103 for "cyberlink powerdvd" and it does not install, just to unpack and does nothing.

  I left the laptop to operate for about an hour to see if anything installed but it does not, what to do?

  Are you talking about the video player updated v 6.1.2.1 - A available on the Toshiba UE driver page?

  It is an update and requires the Player preinstalled (full version).

  After downloading, you will need to unzip the package (vidpl-20140813100353)
  Then, in the vidpl-20140813100353 package, you will find the TC30704300A.exe file.
  It is also a zipped folder. Right click on TC30704300A.exe and extract the files.
  After that, you will get the TC30704300A containing various additional files where you can start the update process.