A1 - no storage USB with ICS

Similar Questions

• Is there a bluetooth issues with ICS / Jellybean on IdeaPad A2109

  Hi all: I was wondering is there any kind of problems with the bluetooth on an A2109 with her wanting to disconnect at will and being almost impossible to get it to reconnect.
  I know it's a problem inheirent with ICS and on my Iconia A500 it was driving, me crazy to the point that I returned using a mini usb keyboard plugged into it. I also bought off game Google a program called Bluetooth Keep Alive and there is a little help but has not solved the problem completely.

  This problem occurs even with my bluetooth mouse, but once I have hung do until he's going to stay until I stop my tablet.

  The reason why I asked this before, I bought my A2109 is if I have this kind of problem so that I can live with it being a bit of a pain with my mouse but if even upgrade to Jellybean doesn't solve the problem, if the A2109 has this problem.

  Having to load it via the mini-usb port, which makes it nearly impossible to leave my wired keyboard connected while I use it.

  I might have to look like an excited Toshiba.

  Unless someone here can give me a certain fixed light or an alternitive that it is able to load when you use my wired keyboard. Thanks for your comments.

  WasteLandSavage wrote:
  Thanks for your quick response.

  Now for my other question and if you know maybe you can point me in the right direction.

  IF I had to have this problem would be possible to connect the charger to a using Type A male usb hub usb cable, the cable into the hub and plug the hub on the Tablet using a Micro usb adapter, which allows me to load when you are using a wired keyboard?

  I googled my brains and can't find one answer other then it is possible theoretically. Thank you

  I'm sure that you cannot connect a charger to a hub.  However, a powered hub should provide some charges to the A2109, though not much.

• Satellite A100: Parallel Port to USB with Vista printing error

  I have a new laptop Toshiba A100 with Windows Vista installed. I can't make my printer A3 HP works via USB with a USB/parallel cable.

  Vista recognizes the connection and says driver installed. Try to print, and it just says: "error" Vista will not let me load the driver supplied with the connecting cable. Anyone got a solution for this?

  Hello

  Are you sure that the driver that came with the connection cable was designed for Windows Vista?
  I assume that the driver is compatible with early versions of Windows like XP.

• Credit card was stolen. How can I pay for storage iCloud with Tunes gift card?

  Credit card was stolen. How can I pay for storage iCloud with Tunes gift card?

  Buy the card normally and wait for it to be loaded.

  (139690)

• Turn off Auto Wifi with ICS

  Does anyone know how to disable the new feature automatic Wifi which has been shared with ICS? I think it's great that the phone can turn on Wifi when you are close to him, but it would be really nice if you could put to put only when near some Wifi networks or even turn off if this importance.

  Short wait the automatic menu Wifi to finally display and ask how you want to use it, does anyone know where in fact go into settings to do when you want and not when ICS decides to give you the pop up?

  It's frustrating because he doesn't stop himself when you leave a Wifi area and there is no apparent way to turn on only when you will be on your Wifi areas which makes this feature more a gene, then a real function.

  settings > wifi > menu button > advanced > disable the three heads-up boxes?

• PCAN USB with NI-CAN adapter

  Hello

  I intend to communicate that LabVIEW with a controller to motor through the CAN network by using an adapter USB-PCAN system Peak. I wanted to know if NI-CAN be able to send and receive commands through devices that are not National Instrument (in this case, it will be the USB PCAN-adapter of the system Peak). Can anyone who knows something about this topic help out me please?

  We used the PCAN USB with the LabVIEW RIDGE driver provide. I don't think you can use NI-CAN or NOR-XNET to talk directly to the network using the PCAN USB CAN but we use the conversion functions of NI-XNET to convert between the CAN messages and signal/data value and vice versa, and then use the driver PCAN LabVIEW for read/write messages.

• Disable AutoPlay of CD and USB with XP Pro

  It is possible to:

  Disable AutoPlay of CD and USB with XP Pro

  How is it made?

  Greetings from Jørn Rudolph to the Denmark

  It is possible to:

  Disable AutoPlay of CD and USB with XP Pro

  How is it made?

  Greetings from Jørn Rudolph to the Denmark

  Sorry about the quote lol

  but here ya go

  • Click Start
  • Click on run
  • Enter GPEDIT. MSC
    The mmc group policy will appear. On the left panel:
  • Double-click Computer Configuration to open the submenu
  • Double-click Administrative Templates to open the submenu
  • Double-click system to open the submenu
  • Double-click autoplay Turn off option that will be near the bottom of the list in the right panel.

  The default value is not configured. Set it to "Enabled".

  The credit goes to www.windowsnetworking.com
  hope I helped :)

• Xbox Live with ICS and WRT54g2

  I have a PC with ICS turned on and my xbox connected via ethernet.  The PC is connected wireless to my WRT54g2.  For the life of me, I can't configure my xbox setting network correctly.  Once I logged with the help of the network on the Xbox support page using 192.168.0.2 but I can't forward ports in this way to open my NAT. I had NAT MODERATE warning.

  Can someone please help me get this straightened out?  What I am doing wrong?

  1 how the WRT is connected to the modem? Via the internet port?

  2. If you run ICS on a PC then the PC works as another router. You have now two chained routers: the WRT and the PC. Implementation of the port on the only WRT redirects will not change a thing because you do the port even redirects on your PC as well.

  3. the best recommendation: keep it simple. Do pass a wire of your WRT to your xbox or get a wireless adapter for the xbox to connect directly. Connection through your WRT and your PC ICS to your xbox is simply a mess. Even if you got all the ports properly transmitted, I won't expect too much stability and quality in your network connections.

  4. If you want to keep as you have now, you must configure the following:

  Xbox: set a static IP 192.168.0.2, subnet 255.255.255.0, gateway 192.168.0.1, DNS 192.168.0.1 mask
  ICS PC: set a static IP address for your wireless network connection: IP 192.168.1.5 subnet 255.255.255.0, gateway 192.168.1.1 dns 192.168.1.1.

  Next, configure the shipments of necessary port for your xbox on the WRT. Before all these ports to 192.168.1.5.

  Then configure the same redirects on your PC of the ICS. Before all ports to 192.168.0.2.

  If everything is configured correctly and works well it should work. But once again: don't expect too much.

• Windows 7 and bios sees not the hard drive, but when I connect the hard drive to the USB with an adapter, I see directories and files

  Please, I need pc

  Original title: windows 7 and bios does not see the hard drive. but when I connect the hard drive to the USB with an adapter, I see directories and files... Ive a hp Pavilion, what to do?

  Check the BIOS for hard drive setting.

  Make sure that you do not connect the drive to a SATA/RAID port.

  Old IDE drives - check the jumper on the drive (use "Cable Select" as a starting point), the BIOS must also be set in legacy/compatibility/IDE mode. Note: If you currently use the AHCI mode, then switch to IDE mode may cause Windows to boot.

  J W Stuart: http://www.pagestart.com

• How to make Ghost Bootable Usb with Image

  I Want To Creat Ghost Bootable Usb with picture please tell

  Thank you

  Hello

  Please follow the steps mentioned in the following article to make a USB bootable for ISO image:

  http://www.kapilarya.com/Installing-Windows-8-beta-using-Flash-drive

  Hope this helps, good luck :)

• Client proxy (on USB) with DHCP address assigned IP does not work with FRDM-K64F

  Hello

  After reading the questions on this forum with a static IP address on the Freescale FRDM-K64F set, I went for a DHCP address, but I can't get the proxy client to work via USB with DHCP connection either.

  My console tells me the following:

  Time of RTC: sea-2014-01-01 00:07:27

  Network initialized

  IP address: 10.143.xxx.yyy (xxx and yyy is real numbers, just change them to the forum of letters)

  Subnet mask: 255.255.252.0

  Gateway: 10.143.xxx.yyy

  MAC address: 00: 0C: 00:06:70:00

  And when I try o connect with the following command:

  java-jar proxy.jar - socket 10.143.xxx.yyy

  I get the result without CLI interface and next:

  Trying to open the socket with device connection: 10.143.xxx.yyy:2201

  [Connected to the Jack: Socket[addr=/10.143.xxx.yyy,port=2201,localport=49605]

  Open channel 8 with hash 0x130399b3

  Channel 8 CLOSED-> OPEN

  notifyResponse AVAILABLE_RESPONSE on channel 8

  AVAILABLE OPEN-> 8 channel

  Open channel 9 with hash 0 x 0

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  Channel 8 AVAILABLE-> REQUEST_SENT

  notifyResponse ACK_RESPONSE on channel 8

  Channel 8 REQUEST_SENT-> ACKNOWLEDGED

  Channel 8 has RECOGNIZED-> DATA_SENT

  notifyResponse AVAILABLE_RESPONSE on channel 8

  Channel 8 DATA_SENT-> AVAILABLE

  I don't know if this topic but my version of java is:

  Java version "1.8.0_31".

  Java (TM) SE Runtime Environment (build 1.8.0_31 - b13)

  Java for 64-bit Server VM (build 25.31 - b07, mixed mode)

  Any ideas or am I missing something completely?

  Thank you

  Andy

  Hi Andy,.

  your log shows that the proxy is connected with the Board of Directors.  To start the CLI, you can either provide '-j' have ' touch to the proxy command line or PuTTY simply connect to localhost (raw Protocol, port 65002)

  / Sergey

• I have a lot of storage iCloud with my Macbook air why I also have to buy adobe revel?

  Why do I need Adobe Revel when I have a lot of storage iCloud with Apple?

  Hi Doris,.

  If you use iCloud for everything, that is to say, contacts, calendar, photos, etc., then you probably need not really Revel. If you are looking for a service that allows you to store unlimited videos and pictures, edit them, synchronize them, create albums to group with your friends and your family, then Revel is an excellent choice. Revel works with Mac, Win 8.1, iPhone/iPad and Android.

  But, as I said above, if you already use iCloud for storing your photos and you are happy with it, I would say that, in truth, you do not need to Revel, too.

  Best regards

  Glenyse

• Storage vMotion with advanced vsphere license

  I have the vSphere advanced license that doesn't include a Storage vMotion.

  This does mean that I won't be able to do manually storage vmotion with this license, or is what is not included in the new vSphere GUI?

  You will not be able to make Storage VMotion.

  But many people say Storage VMotion, even when cold migration is performed. Thus, you will not be able to move VMS on another store data seamlessly, without power off VM.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• Problem with mass storage USB Palm?

  I try to connect to my pre to transfer files and have this in my hardware Manager "a yellow triangle pointing to ( microsoft WPD file system volume driver) the Properties of this so-called" device cannot start. "

  my Pre has 1,103 software web and my computer is Vista Home premium 64 service pack 2.

  I tried all USB ports, and it connects to another computer with XP, all solutions?

  I solved the problem myself, well in fact I created it myself too... I have new security software on my laptop and apparently he can lock all exterior of USB devices unless I agree. Sorry I didn't worry because I love my Palm pre.

  Thanks again and continue to improve I need more things...

• Mapped network drive letter conflict with external storage / USB key

  I have traced a number of network drives in Windows 7 (:) drive F: to J. Whenever I insert a USB key, it receives a drive letter of one of the network drives mapped, making the network itself inaccessible drive (actually, the reader is always displayed as a mapped network drive, it only contain data from USB).

  I think that this is a known issue at least since Windows XP. I even found a fix for Windows XP, but it seems that he has not yet fixed in Windows 7.

  Any ideas?

  I would like to find a solution that I don't have to assign V: to Z: my readers to network to make room for USB keys.

  Thank you very much!

  Hello

  We have had this problem also and use USBDLM to solve. It's a service that you install and it 'redirects' usb mailbox available if the one they want to use is already taken by a network drive or another usb. See the link below

  www.Uwe-Sieber.de

  It may be useful

  Bruno