A2107 Ideapad 12v adapter: will be the OA36247 for the Thinkpad Tablet 1838 work for this unit?

Similar Questions

• When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

  When using a 2010 macbook pro and a mini display port to hdmi adapter, will be the macbook pro display be sent to a TV that has hdmi inputs, or do you need a keyboard command

  Yes it will be displayed.

• If I start Photoshop I get 3 error messages: 1. FastCore-Routinen-Modul 2. MMXCore-Routinen-Modul 3. Mehrprozessorunterstutzungs-Modul could not be loaded because the tool does not work with this version of Photoshop.

  FastCore-Routinen-Modul could not be loaded because the tools does not work with this version of Photoshop.

  The MMXCore Routinen module could not be loaded because the tool does not work with this version of Photoshop.

  The Mehrprozessorunterstutzungs module could not be loaded because the tool does not work with this version of Photoshop.

  Hi zimlo,

  Please check the below link which may help you:

  https://helpx.Adobe.com/Photoshop/KB/error-could-load-fastcore-multiprocessor.html

  Concerning

  Sarika

• Bought LR6 DVD but the installer does not connect to the internet for I can register it.  I downloaded the trial version to work around this problem, but I can't get the program to start.  I get the same message that I should connect to the internet and c

  Purchase DVD LR6 Adorama, but Setup does not connect to the internet so that I can record.  Internet works fine.   I have Adobe account.

  I went to Safari to Chrome and downloaded the trial version in the hope to bypass the DVD version, but I can't get the program to start.    I get the same message that I should connect to the internet and connect.  It seems impossible after 3 hours.  Spent an hour chatting with the support of the India.

  Also remove the cookie file and reg Lightroom then enter the serial number and check.

  Windows:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  programdata %

  It will open the ProgramData folder. inside locate Adobe folder.

  Go to Adobe > Lightroom.

  Open Lightroom and delete all the files inside,

  Then run LR 6 and enter the serial number,

  Mac:

  (1) right-click on the icon in the Finder, then select the 'Go - To Folder' option.
  (2) you will get a text box, type in the following command and then press the 'return '. (" Do not miss ~ symbol" "')

  ~/Library

  It will open the folder of the user's library.

  (3) then navigate to Application Support > Adobe > Lightroom.

  Open Lightroom and delete all the files inside,

  Then run LR 6 and enter the serial number,

• Will be the first elements 12 work with Windows 10?

  I bought a new computer yesterday which will have 10 Windows on it.  First elements 12 works on a computer that has Windows 10?

  Florence

  I first items 12/12.1 on 10 Windows 64-bit edition and Windows Pro 64 bit and everything works fine.

  As I wrote, I feel remains the same as the first items 12/12.1 successes and failures are the same before and after the upgrade to 64-bit Windows 10.

  For any question or need for clarification on this, feel free to ask.

  Thank you.

  Best wishes with your new computer and first elements 12/12.1 projects.

  RTA

• HTML Email - will be the image map links work in most e-mail clients?

  I appreviate your time

  See if that answers your question :-)

  http://www.campaignmonitor.com/blog/post/2432/do-image-maps-work-in-HTML-EMA/

  --

  Nadia

  Adobe® Expert community: Dreamweaver

  http://www.perrelink.com.au

  --------------------------------------------------------------------------

  Unique templates CSS | Tutorials | SEO articles

  http://www.DreamweaverResources.com

  --------------------------------------------------------------------------

  http://Twitter.com/nadiap

• I bought Creative Suite 5.5 two years ago and never installed.  I can load this now on a new Mac or PC?  There will be updates available for this software?

  I bought a version update of Creative Suite 5.5 two years ago, but never install it on my PC.  I plan to purchase a new Mac or PC soon.  I'll be able to load this on my new computer 5.5 update and get the existing updates?

  You need to install it on the same platform for which you bought... Windows or Mac... suites are platform specific and CS5.5 is not eligible for platform swap.  What are updates exist for CS5.5 will be available, but it is unlikely he will be output.

• I have the new Canon EOS Mark II 1DX and me cannot find the Adobe's RAW converter for this unit on the site.

  I know it's new, but I still wish a Beta of CAMERA RAW version for this model unit. I can't properly after produce my work with what I use Lightroom and Photoshop exclusively. I'm sure you'll see more of these messages as professionals increasingly get this camera.

  Thank you

  Chris

  This camera is officially supported in Camera Raw 9.5.  Camera Raw 9.5 now available

• wireless adapter is gone and the extension display not working after hibernation

  my laptop is a thinkpad X201s, os is windows 7, 32 bit, ultimate, English

  I used wireless home and my laptop is discharged, it is put into hibernation automatically

  the next day, I went to the office, plug power adapter and turn on the computer

  then I found wireless does not work, so I opened 'Control network and Internet\Network connections', there is no wireless icon. then I open "Device Manager", there is no wireless network adapter in network adapters

  and another bad thing is when I extend my screen with another monitor, the second screen shows nothing and the monitor does not work, it does not work in another computer, it seems necessary to fix. but it works before

  and I change a new monitor to connect my laptop display of the extension does not work, but the monitor can work in another computer, that's fine.

  and I restarted computer, no help.

  Finally I found the solution for wireless, first computer shutdown and plug-out the power adapter (it is very important), wait 30 seconds, then plug power adapter and restart the computer, wireless, great work

  now, the extension display function still does not work. I guess that the display extension PIN does not work, maybe need repaired

  Hi Jacky,.

  First of all we apologise for the late reply,
   
  As seems to be problems with the extension display port, I suggest you to contact the manufacturer of the computer.
  http://support.Lenovo.com/en_IN/feedback/contactsupport.page
   
  Please come back incase of any queries.
  Thank you
  Jayant.

• Samsung TS-H653G DVD burner, I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully.

  I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully. Possible solutions please

  I have this unit in my Dell Inspiron but D drive disappeared from the computer screen and will not reinstall successfully. Possible solutions please

  Hello

  See how you go with this great piece of software.

  http://www.thewindowsclub.com/repair-fix-Windows-7-Vista-problems-with-FixWin-utility

  Concerning

  GT4U

• We will see the adobe muse pathfinder tool?

  Hello
  I want to know that we will be able to use the pathfinder tool in adobe muse also?
  I think it is a great tool to use in the muse. I already used it in adobe illustrator. But if we
  can see this tool in muse too, so I think that muse adobe will get more option for this step.

  

  I hope that muse adobe will add this tool so we will be able to use it for various kind of thing.

  Thank you very much...

  Concerning

  MD. Waheed

  And what could do you exactly? Muse creates web pages, not content from the traces. You simply can not arbitrarily cut, remove, merge and intersect content because a browser has no way to make it actually.

  Mylenium

• Code 39. Could not load the driver for this hardware device. USB, Audio and Ethernet. Œuvres's driver CD.

  Hello this is the first time I posted about people here so sorry if I get this thread a bit messed up, but to cut a long story short, I plugged in my USB iPhone and then the iPhone has crashed, so I had to uninstall iTunes, to complete the unistallation I had to reboot my computer on that next time that my computer started. My Usb drivers, Audio and Ethernet were no longer works. I tried a lot of thing to solve this problem, I downloaded the drivers and has moved across on a dvd and has not worked, I reinstalled the drivers, didn't work and I also moved my ram in a different solt because a friend told me that this could work. It did not help. I took a screenshot of the problem and transferred to it via CD.

  http://i30.Tinypic.com/ae32vk.PNG

  http://I27.Tinypic.com/2w4jy14.PNG

  When I put my driver of motherboard of the computer disc he also says 'Don't detect any good point. "

  I don't know what to do with this issue but it's really bugging me, any help would be Grateful.

  Thank you.

  I am currently using a:

  Card mother ASRock G31M-GS

  ATI 5970 Gtx graphics card

  On board sound

  2 GB ram cheap

  Windows 7 64 bit

  I just noticed that I posted this in the section wronf my bad for it.

  Zippers, I mentioned would be just compressed the executibles (EXE) versions. If you
  has ran versions EXE of the drivers for the NETWORK card and WiFi and were there any error messages?

  Download the Intel chipset drivers and install them - restart and then try the others.

  If no joy repeat the repair facility.

  Drivers for your computer would come from the machine system and various device manufacturers
  as Intel.

  You need to check on the site of the manufacturer of the system for your model, so you can get the basic
  drivers for the system. Be sure to get and install the Intel drivers for your chipset first.

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• There will be a fix for Firefox 8 crash at startup, even in safe mode?

  I always use Win XP. Yesterday, when I was invited in FF7 to upgrade to FF8, I did. Now I can not access FF at all, because it crashes at the start even in safe mode (when I click on the logo of FF & hold down the SHIFT key). There will be a solution for this? Or I have to go back to FF7, which crashed only periodically? If I need to go back, where can I access a download? I am providing the accident four last ID, starting with the most recent. I can provide more if necessary.

  using roboform? If so check if you have not the version 7.6.2 or later?
  Create a new profile as a test to see if your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  See:

  • http://KB.mozillazine.org/Firefox_crashes
  • https://support.Mozilla.com/kb/Firefox+crashes

  If you have submitted incident Breakpad reports then validate the ID of one or more reports of incidents Breakpad (bp-xxxxxxxx-xxx-xxxx-xxxxxxxxxxxx). You can find the ID of the crash on the topic submitted reports: page crashes. You can open the topic: blocking the page through the address bar, you open a Web site.

  See:

  • http://KB.mozillazine.org/Breakpad (Mozilla Crash Reporter)
  • https://support.Mozilla.com/kb/Mozilla+Crash+Reporter
  • https://developer.Mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report

• ThinkPad Tablet - the missing card

  Hello

  Overall, I am that I am very happy with my Thinkpad Tablet Android (1838). But something which is a must for this tablet is the docking station for charging the Tablet faster and reliable than with a USB port.

  But sometimes I want to host the Tablet each time taking me some time since I had to remove the folio to anchor it.

  I feel like there is a missing adapter that connects the Thinkpad 20V - 65W adapter on port dock the Tablet, like a cable and not as a complete dock.

  Does anyone tried to create their custom adapter, or is this something similar that can work to recharge the tablet with the port dock (but not using the lenovo docking station).

  Thank you

  Martin

  martiniturbide wrote:

  Hello

  Overall, I am that I am very happy with my Thinkpad Tablet Android (1838). But something which is a must for this tablet is the docking station for charging the Tablet faster and reliable than with a USB port.

  But sometimes I want to host the Tablet each time taking me some time since I had to remove the folio to anchor it.

  I feel like there is a missing adapter that connects the Thinkpad 20V - 65W adapter on port dock the Tablet, like a cable and not as a complete dock.

  Does anyone tried to create their custom adapter, or is this something similar that can work to recharge the tablet with the port dock (but not using the lenovo docking station).

  Thank you

  Martin

  Take a look at this.

  Someone else posted pictures of its adapter charger custom in this forum... do not have the time to look for it now.

  Konker

• The drivers for this device are not installed. (Code 28) __This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  I HAV these two errors in my drivers and windows cannot update, can any body healp me?

  Hello

  What devices are - if you can not tell what is the name, then you can specify the category of
  Device Manager - or both?

  --------------------------------------------------------------------------------------------------------------------

  This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  The device doesn't seem to be present. The problem may be a faulty hardware or a new driver might be needed.

  Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

  On theGeneral properties of the device tab, clicktroubleshoot to start the Troubleshooting Wizard.
  ---------------------------------------------------------------------------------------------------------------------
  The drivers for this device are not installed. (Code 28)

  To install the drivers for this device, clickset to update driver, which starts the Hardware Update Wizard.

  ==================================================================

  Those who might be ghosts then right click on them and UNINSTALL - devices and then RESTART.

  References to Vista also apply to Windows 7.
  
  If they show upward then try to manually install the drivers.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.