A2109 - what is the screen? I guess what no gorilla glass?
Hello
I have 2 of A2109 on command. I was trying to get an iPad, but saw these on sale at Newegg for 229 and decided that I could get one for my wife and one for me for the same price as a single Apple device. And specifications are superb. Yes, I'm sure someone will remind me on the screen, but I don't think that that's going to bother me. Which brings me to my question: what covers the screen? Glass of what that it is special or simply? I don't expect exotic glass at this price, but I was wondering if there is anything knows what it covers? Thank you.
Never mind. According to this, it's just glass.
http://www.Lenovo.com/PSREF/PDF/itbook.PDF
Tags: Lenovo Tablets
Similar Questions
-
the duo of sony 13 has gorilla glass
I received conflicting information. The store rep Sony said yes, as did a review of Ultrabook.com. The representative of call Sony said no, after that she went to get. There is no mention of it on their Sony store website
Hello cjo34,
Specifications of Marketing for the DUO13 do not have to reference "Gorilla Glass".
That being said, I can tell you that the screen is durable enough for touchscreen everyday usage, however I would advise against putting the heavy weight or pressure on a specific point on the screen.
Here is an excerpt directly in the VAIO manual on this model:
"The LCD screen is made of glass reinforced to implement high durability, however treat the screen carefully because it is not 100% unbreakable." -
I need a walk through: the screen is black
So I use the clip for the room gym, and after a lot of use, the weight damaged just the screen, I guess to make it dark. So it pl ays just, I can't see the screen. When I plug the clip into the computer, I remember what he put in some main screen. I need a market-thru to mp3 music. The last time I tried, got stuck on the radio lol.
Thank you very much!
I'm not sure what might be your main menu, but try: press the home boy, right, right. If this does not work, try everything, all alone. Hope that works-
-
Brand of the screen on the Qosmio G20 - 108
I just noticed yesterday that my screen looks a bit above. It is not outside the screen, but when I use a torch I can see when the screen is off.
He is not dead pixels as I still see through them and it is unlikely that it is a crack as the pixels still light up. Is it possible that a hair has penetrated the screen somehow.
If Yes, is it possible to repair the screen without replacing?
Thank you
SamHey there,
Before answer you, can you please help me with something.
You use your laptop while he traveled a lot? You use it on your bed? Do you use it in a room with, lets say, a large rug or something of the sort? Things like these could get behind the screen by the edges of the screen, I guess, I have a few particles of dust inside my screen because im always traveling etc. They are not a big problem for me, but I'm sure you can get your screen cleaned under warranty. -
How to change the screen resolution in Windows?
Original title: need to adjust the size of the screen - I guess I did something to make it look great
I need adjust the size of the letters - all is become greater when somehow I logged in today.
I need adjust the size of the letters - all is become greater when somehow I logged in today.
An alternative is to restore your normal DPI.
Right-click on a free space of the desktop > customize > adjust font size (DPI) > uac prompt > click on the radio in front of the default scale (96 DPI) > OK
Note: if necessary be > click Custom DPI > and make the changes.
For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
Everytime I open a website of the screen appear smal. What can I do?
Everytime I open a website of the screen appear smal. What can I do?
Guess: -.
In Internet Explorer, hold down the CTRL key and use the scroll wheel of the mouse to zoom in and out.
-
What signal is emitted in the ListView, when one of its cells appears in or from the screen turns off?
I created listView with custom listItemComponents
Is there any signal when listItemComponent go to the screen?
Currently, it is not possible to detect if the cells turns off the screen. Even if you join LayoutUpdateHandler them they will just stop send updates when you go off the screen. I managed to hack a solution using a timer, but I guess that a cleaner approach would more use a ScrollView with CustomControls instead:
1. get the dimensions of the ScrollView joining ScrollView LayoutUpdateHandler.
2. attach the LayoutUpdateHandlers to the CustomControls.
UPD: It is also viewableArea & viewableAreaChanged event scrollView property.
3. If the controls that were inside the visible area of the ScrollView went outside, raises the event.
Of course re-use of cell works that way.
It's so easy to grab the cell on the screen:
If you use ListItemProvider, updateItem() function is called when the element appears on the screen:
https://developer.BlackBerry.com/Cascades/reference/bb__cascades__listitemprovider.html
It will also be called if the data item are updated in the model.
When the item is created for the first time, createItem() is called.
-
What are the elements appear on the screen of the ATV 4
What are the elements appear on the screen of the Apple TV4
Initially just the settings and a few applications for iTunes movies, music, TV shows etc, then this is all the apps that you download from the store.
-
When I try to open the twitter/facebook etc, as sites the message that this connection is not approved appears on the screen. After some instructions another words in bold comes technical does not come from the details but "I understand the risks". What to do. Help step by step the pl
Hi Linda, can you start at the top of this discussion and see if you can identify a particular program or a device that is intercepting your secure connections?
If you want personal assistance, please start a new question and include your system information.
https://support.Mozilla.org/questions/new/desktop/fix-problems
Scroll down to the suggested items passed to continue entering in your question.
-
My magic mouse is going to appear on the screen instead of what I clicked. (El Capitan 10.11.6)
That doesn't seem to be a problem of magic mouse. More like a necessity to find adware or malware. Download this verification, etrecheck and publish the report here.
-
Replaced the cable. Now, the screen does not work. What could be?
The cable coming out of the back of my monitor Apple Thunderbolt Display is fraying. I decided that rather than risk a short at a certain point, I preemptively replace the cable. On iFixit teardown photos, I decided to replace the cable coming out of the back of the screen myself instead of paying almost $200 to get an Apple service provider to do that here in Bangkok. Bought the cable on AliExpress for $12. It replaced. And... no dice. Screen has not come.
My setup
[MacBook Air]-[Thunderbolt Display]-[drive Thunderbolt]-[Cinema Display]
with a key USB drive and Ethernet connected to the back of the Thunderbolt display
Already tried this
- First impressions were that the cable was defective. But then I noticed Ethernet came the USB has been mounted, Thunderbolt was mounted drive and after a reboot, the movie screen come also. Obviously, the cable has been working very well.
- Second thought was that I'd neglected to plug some cables that connect the LCD to the main logic board. I checked. Seemed fine.
- Third was maybe the serial number of the cable was somehow connected to the main logic board. So I put the old cable. Still no screen.
- Tried to connect the screen with a Thunderbolt external cable, everything worked as well but still no image on the screen.
- Tried more than 30 seconds and 3 hours disconnected as a "reset" of the screen. No change.
- Restarted my laptop. No change.
- Thunderbolt Display well plugged the drive and then into the MacBook, so change the sequence of the devices. No change.
- Information reports under "Thunderbolt" the entire chain of devices, but under "Graphics/displays" system displays only the internal screen and Cinema Display.
- Using the newly purchased cable as a Thunderbolt external cable works fine too.
Question
Does anyone have suggestions on what to try next?
The logic card goes into a sort of locked mode when you replace the cable?
Is there more than 3 flat cables connection + connection to the land between the Panel and main Board?
Although there is no reason to think that this has been, how to test LCD screen still work given all these flat cable connectors?
Note: There is no Apple here store. Apple authorized service providers are without help. He suggested to replace the cable and the Panel at a cost that is almost the same as the purchase of a new screen.
Some of the cables that connect the LCD to the main logic board, are very short. Careful lifting the LCD, because it will go away with strength cables once that raise you it more than 2 to 3 inches on the side of the camera module.
The shorter cable of all is the LVDS cable. A short cable with gold plated connector. Although I have had reconnected the cable on the side of the logic board, I had wrongly assumed that the other end of the cable was stayed connected because all the band used on. Someone with experience of fixing these things said of his town for this cable to unravel by force and to be sure to check both ends of the cable. When I peeled back the tape, I found that he had indeed been disconnected. Reconnect, fiddling with the tiny workspace to get the logical side of Board of Directors of what properly fixed cable again and we were back in business.
Apple authorized service providers here in Bangkok have quoted me $200 to replace the cable. I ordered the replacement cable Thunderbolt Display off AliExpress for $12.50. It was really simple to replace the cable, just to keep an eye on this darn LVDS cable opening to the top of the screen!
-
I use a dual display screen, and when I sometimes click on the home button my mouse over to the right screen and change what is on the screen to the right. I would like to move the home return button to the left side of the screen where it has been on Firefox 3. How can I do this
Use the Customize and drag this button where you want.
https://support.Mozilla.com/en-us/KB/how+to+customize+the+toolbar
http://KB.mozillazine.org/Toolbar_customization -
Just today, I noticed a red fainted to task on the upper right of the screen of my iPhone of 6... Does anyone know what caused it? Or if theres a fix, is their a GTA it could spread or worsen?
It very probably has some damaged pixels of the screen. Something like this should not "spread" on the screen, so if it not bother you that much, it should be OK to leave it for now.
If you are embarrassed by it (or for some strange reason, it's even worse), I would say on a date in an Apple Store for them to have a look for you booking. They will be able to get it repaired if necessary.
I hope this has helped
-
In older versions of Firefox, there was a small rectangular window at the bottom right of the screen which got progressively filled with green squares, that your last order has been processed. This allowed you to know that the computer had received the order and close about how it would carry out the requested task. No such window does appear in Firefox 4. That has been omitted or what I have to do something to get it back?
Click on View - Toolbars - then the module Bar, and your progress bar will be there.
-
What is the resolution of the screen on a Pavilion x 360 screen 13.3 "tactile-2-in-1
Hello
If your question is generic and that you do not have the device but then these models have HD resolution then 13.3 "1366 x 768 HD. It is available in each specification on the web of particular model.
Maybe you are looking for
-
Failed to retrieve the Tecra Z50
Hello world can someone help me with the following problem: I had to win 8.1 OEM comes with laptop. After the release of Win10, I decided to try it and installed on the laptop. (Altogether because of the ease, I got acronis true image installed with
-
The HP Envy dv7 - 7323cl has a double hard drive Bay
The HP Envy dv7 - 7323cl has a double hard drive Bay?
-
Impossible to install Virgin Mobile Ovation MC760 on my Windows XP desktop?
I have a desktop of Windows XP computer and I am not able to install the drivers for the usb modem, I bought. I had a friend help me to find drivers for it, so I know that I am trying to install the good. I noticed that I had the outdated service pac
-
ACS software for the Windows Server license
Hello everyone, I had a question about this software ACS, the ACS license expires? Or I can use it indefinitely? Kind regards.
-
Smartphones blackBerry BIS in China
Hello! I have a Bold 9700 with T-Mobile USA. I have BIS not BES, activated at home. I want to access my mail while I'm in China. With International Email add on, I could access my email from the Japan and England. Is it possible if I am in China or T