A30 stops (warm area adapter)

Similar Questions

• Satellite A30-203: never cooling stops when the adapter is plugged

  Hello everyone,

  I'm using satellites SA30-203. In recent days, main fan of my computer ceases when the adapter is plugged. When operating with the battery, the main fan is sometimes - normally - stop.
  I'm not working only not with software that it takes a lot of CPU. So, what could be the problem?

  Kind regards
  Tunc

  Hi Tunc

  In my opinion the activity of the CPU is not affected only by the software you use, but all activities. Many of these activities work constantly in the background and the works of CPU. Please don t forget that the processor is not the only source that produces a lot of heat. The graphics card is also responsible for the heat.

  As you know all the hardware components are placed side by side and it needs to be cooled correctly. On my Qosmio F20 cooling fan starts to run even if the download of some files is active.

  Believe me that there is no problem. You have a device of high technology with the latest hardware components and the unit must be cooled properly. I can recommend you to change method of cooling in electricity from the night before and put it in silent mode.

  Good luck!

• Can not recover my A30 - stops after only 3%!

  Hello

  I turned on my A30 someday to be greeted by nothing more than a black screen. !!!
  I thought I would just use the re recovery disc start the system. I'm not bothered about formatting the drive as long as I'm back windows. Anyway, responsible for the program of restoration of Toshiba and he began to find it stops after 3%!

  And reads an error message on the screen black, just so that you know is not that I was being impatient, I waited 35 minutes for 3%. I can't understand how to get around this problem. Do I need a disc of Windows XP 'official' home edition of windows to repair? Any help that anyone can provide would be greatly appreciated!

  Hi Frank,.

  I think that your hard drive may have failed. Unfortunately, the recovery CD Toshiba you tried is that used to reinstall your operating system and reformat your hard disk. If this process has started and then stuck at 3%, then chances are you erased what was originally on your hard drive and the process of re - install then had problems to restore the operating system.

  I suggest that you try to boot from the recovery again CD and look at messages and guests you get.

  Depending on the age of your laptop, you can still be covered by the warranty in this case, you can check with an authorized Service partner.

  Kind regards

• A30 stops unexpectedly

  Hello
  I have a laptop A30 and it stops without any indication. This happens at any time in time. I tried updating the BIOS, virus scan, everything. I noticed that the notebook had a dust on the fans that I've ripped off but the problem still happens.

  I noticed that the pc now says he has only 224 b of RAM I'm sure it must have at least 256 MB.

  the dust could have caused overheating and damaged by anychance RAM.

  any ideas?

  Lee soon

  Hello
  some laptops A30 series shared graphics memory.

  This deviation from the RAM you explained is 32 MB... ;)

  What model of laptop do you have exactly?

  Good bye

• Satellite A30 stops when you run Norton

  Hello. I have a Satellite A30 which crashes when trying to run Norton.

  Spec: Satellite A30, Win XP Home SP1, 512 MB RAM, 3 + Ghz processor.

  We also noticed that the fan seems to be "fully enlightened", even when he's just sitting on the desktop with any of the applications that are running.

  Any ideas?

  We noticed that there was a notification for install of XP SP2, so we clicked on that. He started to install, the fan is even harder, it crashed again and now there is no notification of XP SP2!

  We are sure that this is a problem of overheating or battery, but we wonder what we can do about it.

  I hope someone can help. Thank you.
  Nath.

  Hello Nath

  As far as I know that satellite A30 is about two years old and agree to your description, I assume that the unit needs to be cleaned. I have Satellite P20, also more than two years, and for a short while I cleaned. You can't imagine how much dust was inside. I have a cat at home and I think half of the cat hair was inside.

  After cleaning, the laptop can take a breath and it works more silent. Now, I am very satisfied. I can just recommend you to do the same.

  Good luck!

• Satellite A30 stops due to overheating

  My Satellite A30 cutout due to overheating.
  The cooling fans are free of dust.
  I put the Max-performance cooling.
  Is there another reason of overheating?

  Hi David,

  Everything that hinders the free movement of air across the processor HEAT SINK cooling will have the effect you describe. The problem is that dust can not be seen by looking at the fan grids because she has built up inside the unit. The easy way to remove it is to use a vacuum cleaner hose from the cleaner to the grids of aspiration air (using a piece of cloth to maximize suction). This should make the fans running at very high speed and can produce a WAD of debris inside the grids you'll need to choose carefully.

  To be really complete, you need to remove the radiator cover (adjacent to the grids of aspiration and locked by two "torx" screws). With the cover removed, you will be able to see the heat sink itself fixed by four Phillips head screws (two on each side), delete them and remove the heat sink. Note that it will stick to the CPU because of thermal paste used during Assembly. DO NOT REMOVE THE DOUGH. Once the heatsink is removed, you will be able to see an accumulation of debris.

  Reassembly is the reverse of the uninstall, but note sequence on the heat sink numbers, so that you can tighten the screws in the correct order.

  Kind regards

• M/S update stop my WiFi adapter on my laptop

  I'm under the M/S Vista on a Sony Vaio laptop. Today, M/S is an update of Silverlight without my agreement. The result is that I now can't use WiFi on this laptop since the way through boot, seeing WiFi turns off 0 and reports of windows that the switch has been turned off. This happened last year and has been overturned when M/S did another update that has eliminated the problem they created. Someone at - it no indication on what to do to recover the WiFi?

  Hello

  You can access the site from Sony and re - download the drivers for your model...

  http://eSupport.Sony.com/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can also use this method to stop it happening again.

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one at a time, until you find the one 'bad' for your installation (you think it's the Silverlight one).

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• How do I stop emails are transferred to important.

  I do not think that delete the 'Important' folder can be deleted so how do I stop e-mail from either automatically assigned to this case?

  This file is an invention of gmail. Go to their site to get instructions on the configuration of their e-mail.

• How to stop messages are sent directly to the spam box

  A certain family E-mail is always sent directly to the Inbox of spam on my ipad and iphone. How do I report that this is not spam please?

  I'm able to do this on my main computer, but I don't see how to do that on the ipad.

  Thank you very much

  Spam filtering is done by your email provider, not the iOS device.  Contact with them.  If it comes to iCloud mail, there are no parameters for this.

• Programs that have stopped responding are driving me crazy

  Please help me in one last attempt make this usable computer until I have spend money on replacement.

  I had a 1 year (see guarantee) Thinkpad E530 Windows 7 64 bit. It has a 2.5 Ghz Intel i5, 4 GB RAM and Intel HD Graphics 3000. I'm running MSE for antivirus. On paper, it must be able to manage everything that I do on a daily basis. The CPU (usually less than 10%) and the use of the memory of agreement, my hardware is apparently barely stretched by why I do it.

  However, it is slowly driving me crazy. The computer is able to run smoothly in some applications (right now that I am typing for example), but any time I try to change gears by opening a web page or by clicking on a menu in MS Word, the program goes unresponsive for 3-10 seconds. According to what I do, this could happen every 10 to 20 seconds but seems to be worse when a program opens at the outset. May not seem like much, but after months of this, I feel like I spent years of my life waiting for this computer to "not blocked" himself.

  I did a clean install of Windows, run diagnostics on the hard drive, tried to determine priorities in Process Explorer and twisted options in different programs, nothing done. I still often have to look at the small blue circle.

  I'll run any Diagnostics you want, display information on my machine, you name it. If you can make this computer the stutter constantly, I will be eternally grateful.

  Thank you

  Bill

  Bill;

  This is probably not your problem, but it could be a part. If you leave a CD/DVD in the optical drive of computers, they should "launch" and be read to any operation involving the Explorer (aka file operations). This can create some "latency time" which makes your computer appear to "stall" before it happens on what you asked it to do. External USB HDD can cause the same effect to a lesser degree than their playing time is faster than an optical drive.
  You specifically mentioned opening Word as problematic. Try to open in the start menu by typing winword.exe/Safe. Word opens in SafeMode without macros or add-ins. If the word snaps to attention, look what add-ins you have installed, and what you can live without. Disabling or uninstalling necessary add-ins you open Word as an administrator in order to get the privileges required for uninstall.
  On a related note, you might want to look in ReadyBoost. I never use the card reader on my Dell E6410 (with a material similar to yours) so I got a 32 GB SD card and half devoted to ReadyBoost and redirected %tmp% and temporary Internet files in the other half. Now open any office application is instead of restoring from being reduced to a minimum opening the menu start. Note that ReadyBoost on a card reader or USB is more effective when you access many small files. There are many less improved access to a few large files. After initially installing a ReadyBoost drive, you will see an improvement and it gets better as ReadyBoost 'learn' programs and processes access you most frequently. Reformat the SD card dedicated to a NTFS file system also helps.
  Do not confuse ReadtBoost with ReadyBoot. HTH.

• Satellite A30 101: where are the antenna cables?

  Hey!

  I just bought a Toshiba Mini PCI Card on ebay. When I opened the cover of the Mini PCI Slot I see not the range cable for the antenna. If I put the card into the slot, Windows detects and installs but I can't connect to the available network. Windows says that the material conncention (antenna) may not only be o.k. someone of experience with that? I don't want to unscrew the laptop to find the cables.

  Thank you

  Robby

  Hello Robby

  I found information that your device isn't WiFi ready and there is no internal antenna. Sorry, but you will not be able to use your wireless network card.

  Sorry

• Laptop every time is stopped, updates are downloaded

  bla. too many updates

  * original title - whenever I closed my laptop it downloads updates. I mean every time. If I'm on it for two minutes, there's an update. Why is this? *

  blah - not enough to information.

  See: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395

  Vista - http://taurarian.mvps.org/WU_Vista/General_Troubleshooting.html

  Win7-

  1. Problems with installing updates
     http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  2. Open the Windows Update troubleshooting tool
     http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• When I stopped the computer there are updates for Vista

  Original title:

  Vista updates

  For the last two weeks, every night when I stop there are updates for Vista. What gives?

  Please see the article after some troubleshooting for your question:

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339/en-us>

  In addition, you can read the following article and check.

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.Microsoft.com/kb/906602>

  UTC/GMT is 18:13 on Monday, May 21, 2012

• It takes forever to stop and get an error "he made a stop forced down as background programs are 'always' running."

  * Original title: start and stop

  Hi team - can - you advise me here on this point - we have Windows 7 premium and during the signing of the computer, (and we closed everything out, I believe) it takes forever to close... We get a message that says "it's a forced down in the back ground stop programs are 'always' being-execution, then after a few minutes, the computer stops..." Is this normal?  And also it takes for ever to get signed in...  What is happening with this?  Any help is greatly appreciated - many thanks - sincerely - Dave Knapp

  (Moved to programs)

  Hello

  Please click the start menu, type event viewer and press ENTER. Click the drop-down list icon left of views to custom, right-click Administrative events and select Save all events in custom as mode. Choose a file name for it, and save it to the desired location.

  Download the file to a sharing site, such as OneDrive and provide me with the link.

  You can also be infected by the malware. It should run a scan with the following programs and delete anything that they detect.

  Malwarebytes Anti-Malware - http://malwarebytes.org

  AdwCleaner - http://www.bleepingcomputer.com/download/adwcleaner

  Junkware Removal Tool - http://www.bleepingcomputer.com/download/junkware-removal-tool

  Malwarebytes Anti-Malware will produce a log in C:\Users\Anti-Malware\Logs of the \AppData\Roaming\Malwarebytes\Malwarebytes.

  AdwCleaner will produce a log to C:\AdwCleaner\AdwCleaner[S0].

  A newspaper will be produced by junkware removal tool in the situation where the tool has been run.

  It would be greatly appreciated if you could include the three newspapers of anti-malware above programs in your response.

  If please download MiniToolBox and save it to your desktop. Double click on it, select list installed programs and click OK. A journal is open, please send the contents of it in your response.

  I recommend that you only perform a scan with the auditor of the filesystem, which will scan your system for missing/corrupted or damaged files and will try to correct them.

  How to run the System File Checker

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Thank you

  Legaede

• Adapter DB to a new attempt to stop.

  Hello
  
  We want to stop the DB adapter to try again when an error occurs during the call to the db.
  To do this, we put after the properties to ZERO
  
  * < reference name = "SampleAPI" ui:wsdlLocation = "SampleAPI.wsdl" > *.
  * < interface.wsdl interface = "http://xmlns.oracle.com/pcbpel/adapter/db/SLK+Application/SLkApiCheckComposite/SampleAPI#wsdl.interface (SampleAPI_ptt)" / > *.
  * < binding.jca config = "SampleAPI_db.jca" / >. *
  * < property name = "jca.retry.count" type = "xs: int" much = 'false' override = 'may' > 0 < / property > * "
  * < property name = "jca.retry.interval" type = "xs: int" much = "false" * "
  Override = 'may' > 0 < / property >
  * < property name = "jca.retry.maxInterval" type = "xs: String" much = "false" * "
  Override = 'may' > 0 < / property >
  * < / reference > *.
  
  and attempted to deploy the composite but it throw error such as
  
  Exception occurred when the link was invoked.
  Exception occurred during invocation of the JCA binding: "cannot parse JCA connection retry property 'jca.retry.count', '0' because of the value: retry link JCA 'jca.retry.count' property value must be a positive number.
  The called JCA adapter threw an exception of resource.
  
  Can someone suggest the possible solution to stop the new attempt of the DB adapter.
  
  
  Thanks in advance...

  If you want to try again, just comment below properties and deploy, try running.

  Thank you
  Vijay