Satellite A30 101: where are the antenna cables?

Hey!

I just bought a Toshiba Mini PCI Card on ebay. When I opened the cover of the Mini PCI Slot I see not the range cable for the antenna. If I put the card into the slot, Windows detects and installs but I can't connect to the available network. Windows says that the material conncention (antenna) may not only be o.k. someone of experience with that? I don't want to unscrew the laptop to find the cables.

Thank you

Robby

Hello Robby

I found information that your device isn't WiFi ready and there is no internal antenna. Sorry, but you will not be able to use your wireless network card.

Sorry

Tags: Toshiba

Similar Questions

  • Wireless kit PA3298U-1MPC and Satellite A30 - where is the antenna cable?

    Hello
    I have Toshiba Satellite A30 (part No. PSA33A - 87 M 34) which was bought in Australia.
    I just bought the PA3298U-1MPC wireless connection kit a couple of days. The installation guide says I should connect two cables. But I can't find them. There are no cables in the compartment. There are no antennas in both wireless kit.
    So the first question is if I should have antennas in wireless kit (I'm not sure that he has not lost the seller).
    If these cables must be in Notepad then I need help to find them.
    I thank very you much for any help.

    Hello

    If the unit has a wireless antenna, the cables are usually there and visible immediately when the lid of the WLAN card is removed. From your description, I assume that your device is not ready WLAN.

    Good bye

  • Satellite L650-11F: where are the backup information stored on the HARD drive

    Hello.

    My original Toshiba HDD is a failure and I had to replace it with a new one. I haven't had any recovery DVDs until Windows stopped booting and try to avoid buying one.

    I thought that I copy just my recovery Partition and the master boot record on the new HARD drive which worked well. However I find that this hidden restore partition has only 400 MB and so cannot possibly contain all the necessary information to restore the system.

    I have boot from it, but I don't get any options to restore the default settings. It scans only for problems with Windows, runs a few tests on my records and presents me with advanced options that I can't go because I'm not connected.

    I went searching all about and know that ELSEWHERE THE PARTITION RECOVERY that you still need your Windows partition for recovery work.

    It seems just really stupid because most people will try to restore their default values after damage to their windows (deleted files accidentally or whatever).

    What is the point of keeping a partition hidden with just enough to Prime the system, but then require that certain parts of their partition original windows remains intact in order to restore?

    What I'm trying to know is exactelly what part (files) do I need to restore my computer. I tried to copy the Windows partition on the new disk but its too damaged and he'll take it apart if I try to copy some files or to copy directly (using linux dd or ddrescue).

    I am able to copy some of the unique files, so with little chance I might be able to copy everything that I need. I can't copy the part of the Windows folder however.

    So any1 know where the backup information is stored or has other ideas?

    Thank you in advance and please excuse my bad English.

    Hello

    At first, I must say that your biggest mistake was not not to create recovery discs. With these discs you didn t now have a stupid problem.
    Anyway, in my opinion, only option for you is now buy original Toshiba Recovery disk and install Recovery on the new HARD disk image.

    I put t know how to start the discussion with you and try to offer some answers. Is Toshiba doesn t create recovery CD/DVDs more and original recovery image is saved on the HARD drive. At first he was saved on the second partition of HARD drive and visible for laptop owners. Many people have deleted and do some experiments with these files for recovery. Later after the screwing up of most of them wondered why the recovery installation doesn t work anymore and blaming Toshiba for non-working HARD drive recovery facility.

    You need to just check this forum and see how many comments you can find here all this.

    I think that was the reason why Toshiba has decided to save this image on a hidden partition to avoid such things. Please note that this image of hidden recovery is designed for your laptop only and can be used if your laptop has the factory settings. Any type of change may result with missing option to start the installation of HARD drive recovery.

    Problem is that people don't read the operating manuals and don t understand how it works. To avoid any situation where the installation of the HARD disk can't start or failure HARD disk Toshiba strictly recommended recovery DVD creation. I m wondering really you didn't create these disks.

    At this point, I would like to repeat what I think: you will not be able to do anything, except by using the original installation disc of recovery. To be honest, it is cheap and costs 30 euros. Don t waste your time to play, buy, install the OS, and be happy.

    Bye and good luck

  • Memory DDR2 in Satellite A30 101

    Hello world

    I have a Satellite A30-101 and want to update his memory. Can I use DDR2 SO-DIMM memory for who or what I have to buy the older and more expensive DDR memory?

    Thanks in advance!

    sultanio

    Hello!

    No, you can use t DDR2 SO-DIMM, you must buy the RAM DDR.

    The phone supports 2GB maximum. So, you can buy the following modules:

    PC2700 256 MB (PA3311U - 1 M 25)
    PC2700 512 MB (PA3312U - 1 M 51)
    1024MO PC2700 (PA3313U-1M1G)

    Good bye

  • Where are the options of the trackpad in Sierra OS?  In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

    Where are the options of the trackpad in Sierra OS? In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.

    System Preferences > Trackpad!

  • where are the photo books manufactured?

    Where are the Apple on a manufactured Mac photo books created?

    Apple does not announce - you need to ask them - I guess that's where ever they choose and could be one of a number of different places according to volume and when ordering

    And you posted in iPhoto for Mac forum - Photo Books can no longer be ordered at all since iPhoto - they withdrew in April

    LH

  • Where are the fonts for FCPX located?

    Hello

    Where are the fonts for FCPX in my MacBook Pro to mid-2015?

    There are 3 files for fonts: System/Library/Fonts, Library/Fonts, ~ Library/Fonts.

    It seems to be Library/Fonts, but I see that some are not used in FCPX, so I want to be sure. If I'm right, why some is used in FCPX? Looking for don't not to add them, just curious.

    The best

    Elmer

    All fonts are system fonts, no specific applications.

    Fonts can be of different Types of fonts.

    FCPX uses only specific fonts Types, not all types, the system recognizes.

  • Why are my recent photos stored on Photo Mac, registered as pitiful thumbnails. Where are the originals!

    My recent photos have been saved as thumbnails, where are the original Photo Mac.

    Sorry, but which does not happen with Photos

    Either you make a mistake or user action caused this

    What is the source of these ad photos why do you think they are only recorded as thumbnails?

    Have you ever cleaned your drive by deleting things in your photo library using the finder or using the software of cleaning as CleanMyMac, macKeeper or others?

    What has changed since they were full size?

    LN

  • where are the audio files stored during recording as a project?

    Where are the audio files stored during recording as a project. The project opens fine on my computer, but when I move to another computer I have missing audio files.

    They are stored in their own folder in the project folder:

    So if you want to move it to another computer, you must copy the project folder, not only of the project folder.

  • Where are the saved files that someone sends you through Skype Windows8

    Hello

    I just bought a new computer that has windows 8 installed above and I must say that I was shocked when I realized that the system is like that running a pad that is so bad, if you want to actually work with the computer.

    Then, I installed Skype and was amazed that there is nothing that you can do with it. No video call?

    I use Skype to send files and make video calls. Now, when someone sends me a file I have no choice where this file is saved... Where are the files stored?

    OS: Windows 8

    Thank you

    type in your windows search bar

    '%AppData% '.
    then you will go to the folder "Skype".
    and there will be a folder with "my received files."
    had the same problem and figured it out

  • Where are the photos recently deleted in el Capitan

    Where are the photos recently deleted in el Capitan

    Open the Photos app and then go to the view menu and click on Albums, and then double-click recently deleted in the main window.

  • where are the special characters in the new Pages?

    where are the special characters in the new Pages?

    Menubar pages: Edit: Emoji & symbols, or control-command + space combination. Same situation in other Apple applications. In addition, available as a menu item from the menu entry in the menu bar to the right, Finder.

  • Where are the effects?

    My apologies for what is incredibly basic, but...

    Where are the effects of Garageband?

    Help files indicate a myriad of pedals are available in the "pedal box" and you simply have to click on them.

    How? Where?

    Clicking on smart controls only shows EQ, compressor, Exciter, compressor, limiter.

    Help says:

    • Click the triangle in the lower right area of the pedal.

    Where is the "pedal area?

  • Where are the files created in Microsoft Visual C++ 2005 Setup logs?

    Hello

    Where are the installation saves the files created in Microsoft Visual C++ 2005? I checked the temporary directory and couldn't find the logs for Microsoft Visual C++ 2008.

    Thank you!

    Hi EugeneWhitlock,

    The installation files of all installed programs stored in the C:\Program Files location.

    I would also recommend to post your question in the MSDN forum:

    http://social.msdn.Microsoft.com/forums/da-DK/vcgeneral/threads

    Hope the helps of information.

  • re installed XP. Which if I understand correctly it breaks the path (links) here, where are the pictures. Photos are still there. How to make to restore the links to the photos are located under my pictures. Thank you

    I have not read method 4 5 methods before re install XP on top of the instalation of gooseberry.  Somehow, I had picked up Paladan or palladium that froze my system and wouldn't let me go unless I bought it.  So I used the recovery disc to repair XP.  Once I did I found that all my photos did not appear in my photos.  I installed Picasa and can send pictures very well.  I would like to get XP to recognize the photos so I can use Outlook to send photos.

    I read a few other posts and wonder why in method 4 to install in a separate folder?

    The installation disc said repair and I just let it go in automatic mode. How does the system decide which version to boot from?  When it is in a different folder with a new name?  Is it the latest version installed to boot from or what.

    Thank you

    Hi Muddlinthru,

    · What article are you talking about for relocation?

    · Where are the photos?

    · You receive an option to select the operating system to load into the start menu?

    Important : reinstall the Windows operating system or upgrade your OS on-site is a troubleshooting step extreme that you should only take if you fully understand the ramifications and risks involved. If you decide to take this step, make sure that you have the original Windows XP media and product installation key provided with your operating system. If you are not comfortable trying to reinstall or to repair the Windows operating system, you can contact the manufacturer of your computer for help or bring your computer to a professional repair shop.

    You can check the link below: how to perform an upgrade on the spot (reinstallation) of Windows XP:http://support.microsoft.com/kb/978788

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Qosmio F60-100 - after that upgrade RAM screen goes black

    Hello worldI upgrade my RAM a g-skill 2 * 4 GB 1066 Mhz DDR3I have a Qosmio F60-100I am on Windows 7 pro NI checked whether they have updated bios (the toshiba soft explain to me, that there is not an update available)I checked if the RAM were compat

  • Photosmart 5510: customer paper size

    Hello world I have never posted on a forum before, but I'm about to have a magma down! I try to print my wedding invitation. they are a custom size of 19.7x13.9 cm., I tried to add the custom paper size by following the instructions on the other post

  • Yet Mini WT7 - account data Exchange Admin

    Hello I recently received a reminder of 7 inches which has already been implemented by the previous user.When I tried to create a Microsoft account I get an error saying that the local account created email does not match my Microsoft account, obviou

  • runtime error 1002208

    Hello I want to build an exe using LV 8.6 (generator project) development.    When I finished the project in the development of LV8.6, it works well.  But when I copy the project (include the exe file) for the installed computer only run-time engine

  • Tracer Cisco packet 6 / How to connect 3 multilayer switches

    sans_titre.jpg I wan't to ping of 'PC' in the right (DIRECTION FES) for PC on the left (DIRECTION KENITRA) but when I ping fails, I tried to connect 'Multilayer Switch3' and "Multicouche Switch0" but I failed, I used the following commands: Multi-lay