M/S update stop my WiFi adapter on my laptop

Similar Questions

• HP Pavilion M9Z89AA #ABA: update of my WiFi adapter

  I have properly have the Broadcom bcm43142 802.11 wifi bgn, and apparently he cannot receive the WiFi in the 5.0 GHz range. It's disappointing because I have a large household who, of course, and all users of netflix. What makes no matter what Internet Explore stopping all the time. When we got the new router, I thought that my computer can connect to the AC 802.11 band, but apparently even if it is relatively new, that it does not include this feature. So, is it possible for me to get an auxiliary adapter that will accept this signal, or old entirely? Do you guys all recommendations for such an adapter and where? Thanks a bunch!

  This model uses a Mini PCI - e Wireless card.

  Here is one on amazon is 5 GHz

  http://www.Amazon.com/Intel-2-4GHz-5GHz-802-11n-draft-adapter/DP/B0036RBGPM

• HP 2000-2d62sr after installation windows7 is not wifi adapter

  Hi all!

  Once installed on a laptop of this model windows7 stopped seeing WiFi adapter. Where can I find a suitable driver for this OS or check the wifi model card (no documentation)?

  Thank you

  Hello:

  It would be the graphics driver you need.  You install only it and no driver Intel as amd driver uses drivers for Intel graphics cards and AMD.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-115569-1&cc=us&DLC=en&LC=en&OS=4132&product=5449949&sw_lang=

  Controller PCI Simple Comms:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-109570-1&cc=us&DLC=en&LC=en&OS=4132&product=5449949&sw_lang=

  PCI device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-118354-1&cc=us&DLC=en&LC=en&OS=4132&product=5449949&sw_lang=

  .. .and I have no idea what the other two devices are because I don't read or speak Russian.

  If you can provide me with a translation, I'll let you know what drivers you need for these 2 devices.

• Sudden lack of wifi adapter

  Hello world

  I use a Toshiba laptop with window 8. all of a sudden, I lose my wifi connection. and when I open the network and sharing Center, went to the card settings, there is no wireless at all, all I see is that the ethernet adapter. and when I run the wire in case of problem, all it detects is a problem to connect with a hard. I have no idea what to do now, I tried to restart the laptop that doesn't work, pls help!

  Thank you!

  Hello world

  I use a Toshiba laptop with window 8. all of a sudden, I lose my wifi connection. and when I open the network and sharing Center, went to the card settings, there is no wireless at all, all I see is that the ethernet adapter. and when I run the wire in case of problem, all it detects is a problem to connect with a hard. I have no idea what to do now, I tried to restart the laptop that doesn't work, pls help!

  Thank you!

  If you have connected the first time, you got your Toshiba, then you may have used a password? I hope you still have it... Otherwise, your internet service provider can give you the password.

  There was an update for the Wifi adapter a few days ago... I guess, no errors with this update, but just a new adapter-software installed - this may be the simple reason why we have to connect again... I had to use my password to connect on Wifi again after the reboot. And without problems

  In the task bar, you click the Wifi icon and find your routers name and click on connect

• Update for hp pavilion g6-1d73us WiFi adapter

  I have a HP Pavilion g6-1d73us running Windows 7 Home Premium with Intel Core i3 2.30 GHz, 4 GB RAM, 64-bit OS and want to upgrade my wireless WiFi 802.11ac 802.11n wifi adapter so I can also change my modem & router to the new, faster standard. The current wifi adapter I have is Realtek RTL8188CE 802.11 b/g/n wifi adapt. I studied the material on the internet and I think I want an Intel Wireless AC 7260 wifi adapter, but I don't know if it is compatible with my laptop. Could you please tell me what 802.11ac wireless card or adapter is compatible with my laptop or if I'm even able to upgrade that component. My computer works fine and has no problem. Thank you.

  Sorry no. The computer HP laptop motherboard has a BIOS program that is configured to stop the boot process, if all the wireless but very specific cards is installed. In the case of your laptop, no adapter 802.11ac lies on the 'white list' to boot.

  Do not shoot the Messenger.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Qualcomm Atheros AR9485 Wifi adapter closes unexpectedly after Windows updates

  We have a HP laptop, experiencing repeated problems with the AR9485 of Qualcomm Atheros 802.11b/g/n WIFI adpter following updated Windows.  Since we can not get online, we are unable to update the drivers.  Provides basic troubleshooting "Wifi adapter is experienceing driver or hardware related problems.  The device status shows "this device cannot start (Code 10) Operation Failed."  Any suggestions?

  Hello:

  Download this driver... Do not run it immediately.

  This package contains the driver installation package for LAN Qualcomm Atheros QCA9000 wireless controller series in models of laptop support and operating systems.

  File name: sp70859.exe

  Go to Device Manager and right click on the map the problem wireless.  Select uninstall.  Check driver uninstall, reboot and now the driver I posted and see if it works.

• S205 Lenovo with RaLink 3090 series wifi adapter problems - update driver 3.2.1 solve?

  Hello.

  I just got the Lenovo S205 with RaLink 3090 series wifi card and had a steady decline until I downloaded the Version 3.2.1 update which was included in the link for the 309 X (X being 0 for me for my wifi card) software/drivers on RaLink site, under the Help menu.

  Go to ralinktech.com and go to Support > downloads > Windows and you will see a list of several RaLink devices which include the adapter X 309. I chose to download/install the full utility with the driver. I remember well, it may be more 28 megabytes.

  I hope it works for you!

  Update:

  I uninstalled the RaLink wireless utility that came with the 3.2.1 pilot, but it uninstalled the driver too. Then I reinstalled and activated the option "install driver only", went into the control panel > hardware and audio > Device Manager > network adapters >

  RALink RT3090 802.11n WiFi adapter > double-click to open the properties > power management tab > uncheck "allow this computer to turn off device to save energy ', 'OK', close and restart programs.

  So when I start or wake the system from sleep, I click the Wireless connections icon in the lower right (next), bar and then click on the link that I want to connect, and then click 'Connect' While it takes 8 seconds to connect, it is worth MUCH more that to have the connection drop constantly, and I probably reboot my system only once when he didn't to reconnect out of a State of sleep.

  I had a MUCH more homogeneous behaviour since this change, and I hope it works well for you too!

• HP Pavilion 14-b141sa: update to support 5 GHz WIFI adapter

  Hi guys, im under qualcomm atheros 802.11b/g/n wifi adapter ar9485 who can't stand that 2.4 ghz I want to go to 5.0 ghz whats the best move for me? Thank you

  Read my previous post. There is no possible way to put an internal card capable of 5 ghz inside the laptop. Not perfect and I can't wait to have to recommend, but there is always a possibility of wireless usb adapter. Do not shoot the Messenger. I do not work for HP; I say just the facts.

• IPad 2 Air after update to iOS10 wifi turns off automatically.

  IPad 2 Air after update to iOS10 wifi turns off automatically.

  Hello. Could you please identify your router? Also try to describe a little more when it stops, and you can reconnect after that.

• RALink RT5390 802.11b/g/n WiFi Adapter will remain not connected

  I use a laptop of Hp 2000, and the adapter installed on the computer provided wireless is a Ralink RT5390 802.11b/g/n WiFi Adapter.  I ran the driver update tool, and it says I have install the driver update.  I have also run the tool to "Diagnose the problem", and he says that he has no problem.  However, the computer loses internet connection constantly.  I guess it has something to do with the wireless adapter, because all other wireless in the House have no problems. The operating system is Windows 7.  I'm a little tech savvy and can normally include questions to just play with it for a while, but this one has me dumb founded, and its very annoying when you try to do something and you just loose connection and have to start all over again. Help, please!

  Hello:

  I found that the relying on a tool the driver does not always provide information.

  Here is the link to the latest version of the driver if you don't v.3.2.12.0 (13 April 2012) installed.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 321957 & prodSeriesId = 3688868 & swItem = ob-104619-1 & mode = 3

  Paul

• BDX4350KB Wifi adapter and firmware upgrade doesn't work do not

  It is a sequel to my earlier question about if the WLM-20U2 Wifi adapter will work in my blu - ray player.

  After buying the adapter I plugged it and a message 'not supported', if I tried to connect wireless it says there was no an adapter connected.

  So I assumed that this necessary upgrade, so I formatted a 1 Gb USB drive with the FAT file system, downloaded the file level (version 39 http://www.dl.toshiba.com/player/NA/GB/EN/BDX4350KB.html) and copied the file .bin on the USB.

  When I plugged into the player and said to check the disk for a file to update it tells me that "frontend file is not found"... There was only one file to download, and it wasn't in a folder so I guess I'm supposed to just copy that file on the USB drive.

  I checked the USB port with a memory stick with photos on and it works fine.

  How to get the upgrade to work in the hope that it will enable the wifi adapter to work?

  Thank you

  Have you checked the guide in PDF firmware update?
  [Update firmware BDX4350KB | http://fget.dl.toshiba.com/manual/install/10009/Installation_Instruction.pdf?fromPid=%2Fplayer%2FN A%2FGB%2FEN%2FBDX4350KB.html&f=Installation_Instru ction.pdf]

  _ * How to upgrade the F/W * _

  (1) update firmware requires the USB of size max.2GB. Please make sure you format the Flash DRIVE to FAT/FAT32 before you start the upgrade procedure.
  ? Create a new folder on the USB drive and name it UPG_ALL
  ? Unzip the firmware file and copy it in the folder UPG_ALL.

  2) turn on the BD? Drive and make sure that you can see the player's on-screen Menu.
  ? Insert the USB key containing the Firmware upgrade file in the USB of the Blu slot? ray player

  3) press the "SETUP" button on the remote control.

  ? Select keys on the remote control UP/DOWN
  ? Symptom
  ? Upgrade
  ? USB storage device

  4) press the OK button on the remote control depending on the USB storage device.
  ? Now the upgrade file is under research. Please wait massage will appear

• Wifi adapter A6100 lag spikes / logout

  Hello

  I bought a computer on an online store last month and I need to buy a USB wireless adapter, so I bought this USB of A6100 WiFi adapter. Since I was able to connect to the internet, I noticed a lot of split shift (of 75ms to 500 + for a few seconds) that I had not on my laptop, even if the signal quality is Excellent. Also when I turn on my computer, there is a great chance that I can connect to my router, but not to the internet. In this case, I simply right click / solve problems and the same error appears 9 times out of 10 every time: there's a protocol missing on the computer.

  I tried to update my drivers but nothing works. If I want a replacement for this card, I obviously need to go back to the store I bought it will take probably a few weeks but I can't wait and I have no other possibility to connect to my router (any other USB adapters / no ethernet not cable because I am a little too far from the router).

  Furthermore, I use Windows 10.

  Is there a quick fix for me or I must send my rear adapter for a replacement?

  Thank you!

  I decided to buy a cable and everything works fine now. The adapter was defective from the beginning... I'll return to the store where I bought it and try to get a refund or a replacement...

  Thanks for your help!

• Intel Centrino 1000 bgn wifi adapter 'broken '? (on Z570)

  On my new laptop (Lenovo IdeaPad Z-570), I have installed and working
  fine (for about 2 months now), as the dual boot between Linux and Win - 7.

  The wifi hardware is the Intel Centrino 1000-N, that plugs into the PCI-E card
  location of bus. (I had the large bottom plate and examined the)
  card, who has two sons, 1 white, 1 black and stands in his
  slot with a single phillips screw. [Seems that they can put "lock-tight"
  cement on the threads of the screw, the screw did not move.]

  Here's my current dilemma: 2 days, while that started under Linux.
  rather than tension, as usual, I closed the lid and went to bed.
  In the morning, at the opening of the lid, I realized... hmm... maybe it was
  hibernation (if I remember correctly).

  So, I turned it off and then cold started upward. The wifi was not see
  no signal at all. (Clearly the router/WLAN worked like my wife
  laptop connected fine.) I grew up in a cmd, su command prompt ' ed, and
  "iwlist scan" and has confirmed that there is a problem. Said that he could not
  analysis via the interface 'wlan0', because the network was down.
  I went in the ceni and walked through a re - configure and got:
  '... cannot be set without wire-flags... impossible operation, due to the RF-kill'

  Intrigued, I restarted, more to Win - 7, and she also couldn't see any wifi signal.

  I checked the slide switch on the front dash Panel... it looked very well.
  has been passed to the right. Slippery left causes an avant-panneau-LED
  to go off, slide the switch to the right, causing an avant-panneau LED to
  on. (I think I know that this switch controls bluetooth and wifi
  devices. I have not played with the Bluetooth at all yet).

  2 days ago, my conclusion was that the material 'broken' on the wifi adapter.

  But now, my "instinct" is the thought that maybe miss me another possibility.
  (for example a BIOS setting governs the wifi?) Could a misconfigured 'putting into hibernation'
  the installer put the wifi adapter in statehood "firmware-level/BIOS-level-disabled"?
  [for example such that neither OS can easily get the wifi adapter to see signals?]

  TIA...

  checked the fn + f5 to turn on the wireless?
  also check the updates to the bios download page if there is place.

• What is an alternative to the UWABR100 Wifi adapter?

  It seems that Sony has stopped the Wi - Fi adapter for the model 2011 Bravias incredulous. However, the link for the UWABR100 WiFi card to http://www.store.sony.com/products/27-UWABR100 says that it is no longer supported.

  Does anyone know if there is an alternative to the UWABR100 WiFi adapter?

  Now that the UWA-BR100 is no longer produced, and the few remaining are sold at ridiculous increases ($ 175 and up), it seems that the single dongle wifi that works with Sony Bravia and Blu - ray Disc players and gets strong support in the comments of the buyer is the UWA-DR100 Wifi adapter. It is manufactured and sold on Amazon by two companies. You can also see the reviews on Amazon.

  Sony really disappoint recent Bravia owners on this issue. It's one thing to be an essential accessory owner for a major product feature of the production after 5-7 years, but inside of 3 years is supported of the gross product.

• Qualcomm Atheros AR9485 802 .11b: g:n WiFi adapter

  I have a HP Envy dv6 Notebook PC, model No.2CE243OCYT.  It has an adapter for WiFi Atheros 802.11 AR9485 b:g:n. There is an update of HP of the card, but when I updated, I was unable to connect to the internet. I realize that this WiFi adapter is only 2. 5. g I had to update my laptop, then I got access to the internet again. I have not tried again this update of the driver, but just put TWC to update my cable modem to dual band by using the strips of 2.5 G and 5G.

  I'm afraid to install the Atheros update in my lapotop once again because I don't want to go to parrir the hassle of re - install all my software pd [posed again.

  Y at - it a HP dual band WiFi adapter is recommended, and it is easy to install?

  Thank you

  Laptops are as you order them or buy them as ready to ship models. They are not generally considered to be extensible to all. You can switch from desktop computers in general as much as the platform of the motherboard and BIOS allow.

  Not as far as I know, HP makes no recommendataions on laptops and usb adapters.

  Just do a search online with Googl, Bing or your search engine favoriteb for major brands such as ASUS, Linksys and Netgear. Check the reviews of the candidates you find and make sure they include drivers for the operating system that you have in your laptop. NewEgg.com is a good website to csome comparison shopping.

  IF you want wifi nextgen features in the usb adapter and the chance to have a router nextgen with 802.11ac capacity of 2.4 ghz and 5 ghz, then looking for the one that many people recommend.