a6720f - start 27 minutes - please help

Similar Questions

• Start-up office please help

  I start the desktop computer and it always pop up and everything I type does not work I got this from a friend please help

  Hi Eric,.

  Well insulate your case, we need the following information:

  1. You are able to start the computer normally?
  2. If so, the start window is asked after the office completely?

  With the restriction referred to the device, you can try to disable the start window. To do this, we need you to run your computer Windows 7 Mode without fail to start. Here's how:

  1. Turn on/off the device, press F8.
  2. Select Safe Mode on the options list using the arrow keys and press enter.

  After the safe boot mode, then we go to MSConfig to disable startup at the prompt window, then you will not be required with its letters of nobility for access on the said device. To do this:

  1. Go to the Start menu and select run.
  2. Type msconfig and click OK.
  3. Go to the tab startup and uncheck a startup item selected in the list.
  4. Click apply , and then select OK. Then restart your device using the Normal start this time.

  Let us know how it goes. Thank you.

• MacBook does not start without warning, please help I'm losing my mind

  MacBook pro froze performs a simple operation. Got the wheel turns and could not enter the finder, etc. Did a hard reboot. Now the computer does not start. I get the apple journal and the bar for a minute or two and then a zero symbol IE forbidden - a circle with a line through it.

  Surprisingly, it is less than two months after a similar disaster where the computer would not suddenly start. In this case, I was able to get repaired the program apple logic board (the problem was compatible with the congenital fail GPU result).

  Incredibly this time the macbook seems to be in even worse shape. I don't get anything useful from the startup keys.

  cmd R - take me in a gray screen no symbol

  D - no symbol grey screen

  option D - it took a while but eventually I got to choose the network, then it seemed to freeze on the globe

  option - strangely this brings me to a screen asking me to choose the wireless network, but it does not all networks in the box. weird - this happens even with a simple bootable usb key

  option cmd R - annoys me to the world, but the world does not revolve

  T - puts me the screen of the target disk, but the disk is unreadable from another computer

  cmd S / cmd V - gives me a code screen and then freezes

  Shift - takes me to zero cross again

  C - think for awhile, but let me on an undefined gray screen

  (I need some advice on the start-up of the thumb. Pressing C should force the startup of the thumb. I did an inch bootable with el capitan. However, I am not convinced that my thumb works on a functional mac either - I just can't get a macbook functional 2009 to start the boost by pressing C, although it starts from the thumb if I press option and go through the menu. Weird.)

  Help, please. Urgent need to use the computer and access the data on it.

  Even if you have just a few ideas that would be useful.

  Can I assume that you have a 2009 MBP?

  You have your data backed up?

  Have you tried SMC and NVRAM resets?

  https://support.Apple.com/en-us/HT201295

  https://support.Apple.com/en-us/HT204063

  Have you tried a secure boot?

  https://support.Apple.com/en-us/HT201262

  Take our installation disc and use the one with the Apple Hardware Test instructions on it and run the original test.

  Note that an error free AHT is inconclusive.

  Ciao

• Please help my iPhone 6 is disabled for 60 minutes

  Please help my iPhone 6 is disabled for 60 minutes

  Follow these steps to activate your iPhone. If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

• iMovie does not start! Please help me...

  Hello

  iMovie 10 does not start when I run the application it!

  iMovie start for a few seconds, trying to backup previous library and then crash...

  Please help me because I don't want to lose all my projects!

  Thank you for the support.

  Cheers to the Italy.

  Here's the message log:

  25/07/16 20:38:19, iMovie 957 [4230]: warning: the selector Gestalt gestaltSystemVersion returns 10.9.6 instead of 10.11.6. This isn't a bug in Gestalt - it is a documented restriction. The NSProcessInfo operatingSystemVersion property to get the correct version number of system.

  Location of the call:

  25/07/16 20:38:19, iMovie 958 [4230]: 0 0x00007fff938d76df ___Gestalt_SystemVersion_block_invoke + 113 CarbonCore

  25/07/16 20:38:19, iMovie 958 [4230]: 1 libdispatch.dylib 0x00007fff892a140b _dispatch_client_callout + 8

  25/07/16 20:38:19, iMovie 958 [4230]: 2 libdispatch.dylib 0x00007fff892a1303 dispatch_once_f + 67

  25/07/16 20:38:19, iMovie 958 [4230]: 3 0x00007fff93863fbc _Gestalt_SystemVersion + 987 CarbonCore

  25/07/16 20:38:19, iMovie 958 [4230]: 4 CarbonCore 0x00007fff938637d0 Gestalt + 139

  25/07/16 20:38:19, iMovie 958 [4230]: AVCHD 5 0x000000012ca6402d _ZN13FDVDProcessor12FCDVDManagerC2Ev + 141

  25/07/16 20:38:19, iMovie 958 [4230]: AVCHD 6 0x000000012ca69ab7 _ZN13FDVDProcessor12FCDVDManager13GetDVDManagerEhhPFvvE + 87

  25/07/16 20:38:36, iMovie 015 [4230]: ERROR: could not allocate class object (null) - return nil (file: /Library/Caches/com.apple.xbs/Sources/DeepSkyLite/DeepSkyLite-28072.7.78/Framew ork/DSBridge.mm, line: 7612)

  25/07/16 20:38:36, 078 diagnosticd [127]: error assessment process info - pid: 4230, puniqueid: 4230

  25/07/16 20:38:36, 080 InternalFiltersXPC [4231]: host connection < NSXPCConnection: 0x7f85b350f2a0 > invalidated connection from pid 4230

  25/07/16 20:38:36, com.apple.xpc.launchd [1 114]: (com.apple.iMovieApp.64352 [4230]) Service was released due to the signal: Abort trap: 6

  25/07/16 20:38:36, com.apple.xpc.launchd [1 143]: (com.apple.ReportCrash [4236]) endpoint has been activated through legacy launch (3) API. Please go to XPC or bootstrap_check_in(): com.apple.ReportCrash

  25/07/16 20:38:38, ReportCrash 831 [4236]: report of incidents recorded for iMovie [4230] version 10.1.2 (283259) to Users/iMaclittlegiop/Library/Logs/DiagnosticReports/iMovie_2016-07-25-203838_i Mac-Littlegiop - Home.crash

  25/07/16 20:38:38, 889 ReportCrash [4236]: AutoSubmitPreference is 0

  25/07/16 20:38:39, UserNotificationCenter 012 [4238]: * ATTENTION: the method in the class userSpaceScaleFactor NSWindow is discouraged on 10.7 and later versions. It should not be used in new applications. Use convertRectToBacking: instead.

  Launch iMovie by holding down the option key and see if you can create a new library. If Yes, then add clips to the timeline and see if iMovie works ok.

• Satellite P10 554 will not start! Please help ASAP!

  Hello, please someone help as soon as possible.

  I got it for a few years now. A keyboard replaced Germnan to English.

  Used it three days ago and was very good. It shows no signs of something not ussual.

  This mornign however, I pressed the "power" button and not started. I tried to connect the battery, no indicator light came.

  I'm lost-don't know what to do.

  Please help someone?

  Thanks in advance

  Hello Morta

  If the unit is connected to the power supply and if there is no response after pressing power button must be some hardware malfunction. Press the power button and hold down for a few seconds. I put t know how old is your device but it is possible that the warranty is still valid. Please contact the customer Service of your country partner and let check the device. The warranty will cover the costs.

• I turned on optimizing iPhone storage in my iCloud settings is not to do so. I have still the pictures in full resolution on my phone. Please help I don't want to start deleting photos

  I optimize storage iPhone enabled in my iCloud settings but it doesn't seem to work. I still have the full resolution original on my phone. Please help don't want have to delete photos to free up disk space.

  You continue to have images full resolution until you start running out of space. Then the resolution will change accordingly. Leave it alone.

• HP MINI 110: HP MINI 110 start-up display "enter the current password. CNU9383H0J fatal error"Please help.

  Please help me with my laptop HP MINI, which is showing a message whenever I try to start the machine below.

  "Enter the current password.

  The password check failed.

  Fatal error... Halter system.

  CNU9383H0J ".

  I don't know what password to enter. Plase help.

  Hello

  Enter e9lofufz1w (3rd character is a lowercase L)

  Kind regards

  DP - K

• I installed the birth of nations gold on my new pc... it has windows 7. the installation was successful, but the game does not start... Please help!

  I installed the birth of nations gold on my new pc... it has windows 7. the installation was successful, but the game does not start... Please help!

  Hello

  1. what happens when you try to start the game?
  2. do you have messages or error codes?

  Follow the steps in the article mentioned below and check if this solves the problem.

  Known graphics issues in Rise of Nations
  http://support.Microsoft.com/kb/820089

• And I would add that I use Firefox, so my Start button is always on bottomm far left... Somehow extreme sound on laeft topp... Please help me if I can get it on background...

  I also use Firefox a distant sound always at lower left... Please help me to get on down to the far left... An it's my start meun...

  Your question is unclear, but I think you mean that your taskbar has found its way to the top of the screen.

  Right-click on the taskbar, and then click to remove the tick of locking task bar, then left click on the task bar and hold down the button then drag the mouse to the bottom of the screen and release the button. That must be put in place and you can lock the taskbar if you wish. The taskbar can be placed top, bottom, or on the sides and it will work normally at each location.

  Thank you very much.. I was just trying to find a way to tell everyone I finally got myself... A thank you very much tho. /. I hhave never done this before... It was weird...

• Please help: Windows XP does not start error message: STOP: 0 x 00000024

  Original title: Please help: Windows XP does not start.

  Windows XP does not start, there is a message: STOP: 0 x 00000024. and run CKHDSK/F to check for hard drive corruption. But I don ' t know how to make it work? Please help, thanks.

  If this is the message you get, then you have multiple problems...

  1, xp should be on the C: drive, not F:

  Default C: is for the OS only. With xp on drive F: and you use only a hd

  then the hd must be formatted and all partitions deletion (unless there is a relocation

  the operating system is present). Install the xp installation cd, boot the pc on a cd (some PC need BIOS

  be defined for this, (boot priority), once at the cd menu, press r for recovery console, select 1

  for the C: drive, press enter for the password, type: Diskpart in diskpart, see all partitions, delete all,.

  Create one, press the key type, ESC: EXIT leave pc reboot, install xp from the cd, format it when asked.

  Read kb307654 or kb314058

• I have a Dell Inspiron with windows XP and I can not start. I have the windows disc but do not know how to clean and reinstall. Please help me

  I have a Dell Inspiron with windows XP and I can not start.  I have the windows disc but do not know how to clean and reinstall.   Please help me

  You can repair XP or try the following:
  http://support.Microsoft.com/kb/917964
  http://support.Microsoft.com/kb/307545

  TO

  Re - install http://support.microsoft.com/kb/978788

• Please help computer does not start!

  Hello, I need desperate help! When I try to start my computer, it starts work and then comes to the screen below. I tried to start it in safe mode and others, but this screen keeps coming back. Please help, how can I get rid of him?  The screen is bright blue with white writing and said.  A problem has been detected a windows has shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME so he says a lot of stuff on the verification of the material and at the bottom it said technical information: * STOP: 0x000000ED (0x89D35900, 0x00000000, 0xC000009C, 0x00000000) Please help me! I can't get my computer to start so I have a lot of data out there I'm desperate to get. Thanks, kate

  Hi KateStapleton,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  See the Microsoft article below and try the steps mentioned, check if it helps.

  When you restart your computer or upgrade to Windows XP, you receive the error message "STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME".

  http://support.Microsoft.com/kb/297185

• Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

  Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

  Hello

  ·          What is the number and the model of the computer?

  ·          What is the service pack installed?

  ·          The meadow of operating system has been installed on the computer?

  ·          Do you remember any changes made on the computer before the show?

  Try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx

  You can also check: Error Message: Windows could not start because of the mistake in... : http://support.microsoft.com/kb/326671

• error starting buvoemd.dll: "the specified module is not found." (please help. some of my games have not worked since this error has been appearing after start)

  This error has been appearing after starting:

  "Error loading C:\WINDOWS\system32\buvoemd.dll".

  The specified module could be found.

  Can we fix this or send me a copy of the module or anything like that?

  (please help some of my games do not have given that this error has been appearing after start)

  Thank you

  There is no file with this name in Windows XP.  It was probably part of a virus or spyware infection that has been partially removed. Run a full scan for virus/spyware.  If the problem persists, use the free Windows Sysinternals Autoruns tool to find and remove the reference to the file.

  For more information about how to use the Autoruns, please see:

  Autoruns for Windows Windows Sysinternals Autoruns Forum

  Boulder computer Maven
  Most Microsoft Valuable Professional