AAA and vty authentication

Similar Questions

• Go to AAA to local authentication on 100s of production network devices

  Hello

  I'm looking to migrate 100 s of local AAA authentication devices. I have the code I need to apply, but I can't think of a way how to automate this process.

  If I connect to a switch using the local username, I can then add the config of AAA in the global mode

  AAA TACACS_LOCAL authentication connection group local TACACS_SERVERS

  authorization AAA console

  AAA authorization config-commands

  TACACS_LOCAL AAA authorization exec group local TACACS_SERVERS

  AAA authorization commands 0 TACACS_LOCAL TACACS_SERVERS local group

  AAA authorization commands 1 TACACS_LOCAL TACACS_SERVERS local group

  Group orders 15 AAA authorization TACACS_SERVERS local TACACS_LOCAL

  Start-stop accounting exec TAC TACACS_SERVERS AAA group

  AAA commands 0 arrhythmic TAC accounting TACACS_SERVERS group

  orders accounting AAA 1 group of start-stop TAC TACACS_SERVERS

  AAA commands 15 arrhythmic TAC accounting TACACS_SERVERS group

  However, once I added the config for the line, authorization and then comes into play (as I am logged in as a local user) and rejects any order entered, I then need to re-login using an account of AAA and apply this code;

  line vty 0 4

  authorization controls TACACS_LOCAL 0

  authorization controls 1 TACACS_LOCAL

  authorization controls TACACS_LOCAL 15

  exec authorization TACACS_LOCAL

  accounting orders 0 TAC

  TAC controls 1 accountant

  TAC of 15 accounting commands

  accounting exec TAC

  authentication of the connection TACACS_LOCAL

  I wanted to know if someone came up with a way to apply the code in a single shot? I would ideally like to automate this process using Cisco works, however, I don't see apart from Add this code to the startup config and re-boot anyway...

  Thank you very much

  LON

  LMS generally uses TFTP to deploy the configuration of devices. If the user should not be a problem.

  Go to Configuration-> model-> Import Center

  You can import a configuration of your devices by selcting one. When the configuration is retrieved, you can remove the parts of the configuration, you don't have to and paste the aaa authentication in the window.

  then click Next,

  Here you can preselect the devices you want to deploy. and then click Next.

  If no configuration is displayed, click Next.

  type the required information in the fields. Click on finish

  I recommend to create a template for the removal of the configuration of the aaa, but be aware that when you type just no aaa new-model configuration is 100% removed, soon you type still aaa new-model you have the old configuration was merged with the new. You negotiate all your orders of aaa, followed an aaa new-model step. (This cost me about 2 hours to understand how to remove it).

  Next step is to deploy the config on a test device.

  Go to Configuration-> model Centre-> deploy

  Select your template, and then click Next

  Select your device-> click Next

  If you do not configure any settings click then

  You can add a few additional configurations if you want, click Next

  Plan your deployment, and then click on finish

  Search for problems during the deployment, if everything has worked you can connect the device with your credentials of Ganymede.

  If there are problems with your model, export it and open it with an editor xml of your choice and change the model, import it, and try again.

  I add an example of model

  Good luck

  Alex

• RADIUS and GANYMEDE + authentication

  We authenticate our systems through dot1x. I also need to be able to authenticate our Cisco admins using the same ACS server. I see how to configure a switch to make the two GANYMEDE + and RADIUS, but I do not see how implement GBA to allow a switch to use GANYMEDE + and RADIUS.

  Can someone give me a pointer?

  Thank you

  You need to put in place once the authentication on the switch.

  AAA authentication login default group local Ganymede

  Group AAA dot1x default authentication RADIUS

  AAA authorization exec default group Ganymede + authenticated if

  Group AAA authorization network default RADIUS

  Cisco RADIUS-server host 2.2.2.2 keys

  Cisco GANYMEDE-server host 2.2.2.2 keys

  The GBA, you must add the switch twice.

  ACS---> network configuration---> add aaa-clinet

  Host name switch1

  IP: 3.3.3.3

  With the help of authentic: RADIUS IETF

  Add another switch

  SWITCH2 host name

  IP: 3.3.3.3

  With the help of authentic: Ganymede +.

  Kind regards

  ~ JG

  Note the useful messages

• Why my phone was telling me my copy of windows and not authentic after two years? I tried a system restore but it did not help

  Why my phone was telling me my copy of windows and not authentic after two years?

  I tried a system restore but it did not help

  Hello

  1. Windows you receive not genuine error?
  2. Did you do any software or hardware changes on your computer before the show?
   
  Follow the below mentioned article:
  Genuine Windows: Frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows/help/genuine/FAQ

• AnyConnect user using the user certificate authentication and LDAP authentication

  Hello

  I'm trying to implement the Anyconnect VPN for my office. Now, I want the user to authenticate the user certificate based (which is install user local system are we) CN value and LDAP authentication. A help how to achieve this requirement. We install Certificate ROOT and INTERMEDIATE Godaddy and even already installed ASA. Also, we have the user certificate installed on each system user to authenticate the user.

  Any help please.

  Hi subhasisdutta,

  This link will certainly help you with the configuration:

  http://www.Cisco.com/c/en/us/support/docs/security/AnyConnect-secure-mob...

  Hope this info helps!

  Note If you help!

  -JP-

• Switch of AAA and password Enable question

  I have a switch with a config to base thereon and created some 15 local user privilege.  I was copying the config of another switch and unfortunately did NOT know the secret to activate it but still added to the (stupid I know) configuration.  Opening a session on the switch after being in production was working fine, until I tried to configure AAA.  As the enable password I've referenced another similar switch for configuration of the AAA and I did this several times in the past and it works normally.

  However, this time AAA would work not for a reason any but everything was fine because the local user account.  Then I made a few other changes trying to solve the AAA and now when I login, it invited me to this password to enable a reason any?  The local user works get me in but for the non-privilege mode.   Can anyone shed some light on why this is happening?

  It would be difficult to provide information on why your config didn't work as expected without seeing the actual config :)

  So, it looks like you will need to perform a password recovery. You can follow the instructions in this link:

  http://www.Cisco.com/c/en/us/support/docs/switches/catalyst-2950-series-switches/12040-pswdrec-2900xl.html

  I hope this helps!

  Thank you for evaluating useful messages!

• AAA and GANYMEDE servers

  Hi all

  I want to download a free, yet reliable servers AAA and GANYMEDE , can you guide me? Also, I need help with their configuration for study purpose.

  Both of them are GANYMEDE, do you also need RADIUS (your post says AAA)?  Assuming you just need GANYMEDE:

  Probably the best known is:

  http://www.shrubbery.NET/tac_plus/

  Also, the go RANCID.

  For a solution based on Windows you can also consult:

  http://www.TACACS.NET/

  If cela messages answers your question or is useful, please consider rating it and/or mark as answered.

• Creative cloud, Mac and Proxy authentication

  Hello good people,

  I'm in a bit of trouble with CC, Mac and the Proxy authentication.

  To download my Mac CC wonder password and username authentication proxy, which is enabled in the network, the advanced - settings HTTP proxy preferences . I am able to browse the web and access the Adobe creative web part.

  I used an open wireless connection to download CC and it worked.

  Now when I try to open it asks me to insert the password and user name for proxy.

  I have entered the credentials of well-known work, but the guest retains his return.

  I've seen other posts related to this, I wonder if anyone has found answers?

  Have you tried to add several sites of adobe in order to bypass the authentication proxy on the proxy server, but it did not work, either

  Any help is appreciated mucho!

  Hello

  I solved this.

• Combination of certificate and anonymous authentication on a server not supported?

  Hello

  having certificates of authentication (name of user and password is DISABLED) and anonymous authentication turned

  on a server LCRM led to errors of application client-side open documents protected Anonymous auth.

  Earlier, as the name of user and password - auth is lit (in more cert and anonymous authentication).

  Anonymous-auth protected documents very well just open (withous any question on the credentials)

  Is this considered a bug?

  There will be a solution for this?

  Thank you

  Dilettanto

  Dilettanto

  I was able to reproduce the problem that you reported.  I don't know if this is a bug or not, although it seems that it might be.

  You must connect this issue with the Adobe technical support so he can deal with the necessary people.

  Concerning

  Steve

• UNIQUE between Simple mode and open authentication possible OAM?

  Hello
  
  Our SSO OAM in 'Open' mode (WP, PM, AM, AAA and ID).
  
  I would like to configure an applications in SIMPLE mode between the access server and webgate. But still I'd like to preserve, single sign - on, when the user accesses the protected open OAM application.
  
  Is this possible? Thank you.

  Yes, possible. The transport application component security mode has no impact on the end user SSO.

  Technically, the mix of modes (simple and open) is not supported. If you have installed some AAA servers more in simple mode you can connect your webgate to those simple ones more and not the other (open mode) to avoid this problem.

  If you need to share the existing AAA servers you will need to bring the listening in BOTH modes. This used to work even if I have not tried with recent versions. The technique is to (re) configure the AAA servers in Simple mode and then pass the parameter mode back to open the profile of component in the directory (via the admin UI).

  Mark

• AAA and access based on roles (NPS)

  Hello

  I authenticate all my cisco switches and routers with NPS, AAA + AD

  A server running NPS service with cisco attribute shell: priv-lvl = 15 or 5, depending on the ad group.

  But I would like to configure the role based IOS overlooking.

  When I run the view enable command, I get

  Password:

  I tried with my password, password configured enable ad and always gets

  Failed authentication %

  Mid line vty config

  line vty 0 4

  VTY - AAA authorization exec

  connection VTY - AAA authentication

  entry ssh transport

  Have you spent by the view configuration listed below parser example. Please check here

  View the authentication is performed by an external authentication via the new "cli-view-name" attribute server so you must use cisco-av-pair as cli-view-name = xxxx

  The AAA authentication only associates a single view to a user name given; in other words, display only a single name can be configured for a user to an authentication server.

  In case you still some problem, run debug Analyzer view and share it out, I'll try to help.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Problem IOS 15 and VTY ACL

  Dear community!

  We have recently installed a router C2951 running the version IOS 15.0 (1). However, we have a VTY ACL configuration problem. When trying to connect to the router via SSH, the ACL VTY has some matches on the SSH client's IP address, but the router refuses the SSH connection when the standard of the "VTY_ACL" called ACL is set on line vty (marked by red color). If no ACL VTY has assinged to the vty router line, the SSH connection is OK.

  The current configuration seems to be OK, see below:

  ...

  [(Il y a certaine configuration AAA, y compris TACACS + et enfin l'auth local à la fin de la liste de séquence).]

  ...

  line vty 0 4

  access-class VTY_ACL in

  response login timeout 10
  preferred no transport
  entry ssh transport
  output transport ssh
  !

  IP access-list standard VTY_ACL
  [host IP] allow
  allow [subnet range] 0.0.0.255
  !

  Could someone help with this problem? Does anyone have an experience about it?

  Thanks in advance!

  Best regards

  Belabacsi

  Hello

  What you see, is the correct behavior. It's a problem in earlier versions of IOS (allowing ssh even without the "vrf-also" option) that we had corrected in 15.0 (1 M) and later versions, please visit:

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsv86113

  Thank you

  Wen

• How can I erase the active sessions and / or authenticated at a granular level?

  When I visit a Web site and I authenticate either via username or certificate / States PKI, identification and authentication information is stored somewhere. I want to know where that somewhere, so I can cancel these one at a time manually.

  I understand that I can go into the Options and clear browsing data - and Yes, this will accomplish the same sorta thing - however, it will kill ALL my sessions authenticated through ALL my tabs. I would like to know if there is a manual way where I can do BY the site, while it is not a such brute force method.

  Last note: I don't want to close all my tabs (Firefox completely quit). Nor do I want to go through the options to do. If I can be educated to know where is my session store location and authentication, then this will answer my question.

  I am an advanced user and have no problem working my way around my system to fit my needs, I don't know where to find this database store.

  It is likely not possible since it is to disconnect from the secret decoder ring (CSD) and the sending of a notification to close all http and ftp sessions (net: clear active connections).

  See 'sessions' in chrome://browser/content/sanitize.js

  • http://MXR.Mozilla.org/Mozilla-central/search?string=clear-active-logins
  • http://MXR.Mozilla.org/Mozilla-central/search?string=logoutAndTeardown

• KB982381 which replaces 980182, 978207, 976749, 976325 and native authentication from windows 974455 breaks Single Sign On

  I have proven tha the recently updated KB 982381 which replaces 980182,978207, 976749, 976325 and 974455 breaks single sign on for my domain. This process of Single Sign-On using Kerberos authentication to the people on an Oracle Portal newspaper. This works perfectly for each single user... As long as we do not install these updates. Each month, we must keep remove these KBs. The thing is I don't want to continue to do that I have not WSUS. In addition, I would quite be able to upgrade my computers without breach of SIngle Sign On. That everybody knows or has information on what could cause this problem?

  Contact the Support of Oracle and your MS TAM.

  No computer must be connected to the internet without security for IE installed the latest update!

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Why my PC now starts with black background and not authentic message?

  Original title: why PC starts in Mode safe?

  I have Microsoft Windows Vista Home Premium 64-bit Edition.

  Before going on vacation, I turned off all power. After that we are back and turned on PC, system booted in safe mode.  Screen has black background.

  Message reads; Windows Vista (TM) - Build 6002 - this copy of Windows is not genuine.

  What could have happened? PC was working fine before our departure.

  Moved from Vista Performance and Maintenance Forum.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) to select your "country" you are in the drop-down list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  What's the relationship between activation and genuine Windows?
  http://Windows.Microsoft.com/en-in/Windows7/what-s-the-relationship-between-activation-and-genuine-Windows

  What is the validation, and how does it work?
  Windows 7: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=win7
  Vista: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=winvista

  Authentic Microsoft software program privacy statement
  What data is collected?
  http://Windows.Microsoft.com/en-us/Windows/genuine/privacy-statement

  -Product key of letters and numbers-

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Worldwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com