UNIQUE between Simple mode and open authentication possible OAM?

Similar Questions

• What is the exact difference between secure mode and diagnosis

  I am repairing a pc and have done everything I can do in terms of diagnosing the problem. The only thing she shrinks down is to start in safe mode but not in diagnosis or vga mode. It is the same even when you use another defective hard drive. It must be a hardware component on the motherboard. I deleted and all the other components. I disabled designed in bios and Device Manager. What is the difference between secure mode and diagnosis?

  Thanks in advance for any help

  It was the capacitors on the motherboard that needed to change. It works fine now.

• The more ploblems between El Capitan and opening 3.6

  Following the publication of the last El Capitan and the report that the question of profiling to screen has been resolved, I have a few questions.

  • Are there other issues pending? I heard about thumbnails being backwards.
  • Are claimed in El Capitan Yosemite real speed improvements? (Not specifically an opening issue but relevant).
    • I still use Yosemite and find that very slow compared to the Mavericks despite Apple claims that Yosemite has been faster. I have very long boot time and some applications are taking ages to open or simply crash (E-mail for example).
    • I use a MBP 15 mid2012 with a disk HARD of 500 GB, screen high resolution (not the retina) and 16 GB of RAM.

  Thanks for your help.

  Robert

  Tonight, I installed the update of El Capitan for MacOS X 10.11.2.

  Opening is always present. I have all the problems of speed, but I've ever had.

  But the problem with wrong thumbnails in the list view persists.  I can live with that.

  

• Gel of Lightroom to switch between library mode and developing.

  I installed the trial version of Lightroom.

  Imported photos and Lightroom freeze all the time when I go to library

  and patterns of development...

  What could cause the problem?

  Is it possible to debug this problem?

  Thank you

  Vyacheslav

  http://Vyacheslav.photo

  Try to diasable the GPU.

  Go in Edition > Preferences > Performance and uncheck CPU graph use.

• M6220 change to simple mode makes me unable to connect

  Hello

  We have a chassis blade M1000e with a M6220 switch. If I change the mode of operation in single mode, I am automatically disconnected (also described in the knowledge base). But when I try to log in again my password no longer works.

  I tried the password from us, who worked before the reset and also the password default dell.

  It comes to the knowledge base article, that I found on this topic:

  www.dell.com/.../QNA43764

  I solved it. Changed the mode simple mode and then just connected via CLI and set a new password for root.

• Attack is different between the view and the browser preview of the design?

  I'm a long-time user of Dreamweaver, but I'm new to Adobe Muse. (I'm eager to learn, especially for its capability of Parallax scrolling). I ran into a problem now, however. It seems that the main in an unordered list (UL) don't shows not the same between design mode and Adobe Muse when you preview in Google Chrome. I'll try to join two screenshot images to illustrate.

  

  The image on the left is taken from a way of creation of Muse (you can even see one of the directions in there.) The right image is the same area of Chrome. It is a pretty big difference.

  The unordered list has a specific paragraph Style and the header above it uses a different paragraph Style, as well as a character Style so that it uses one different font and other. However, all of the text in the box uses a value of 120% for the leader. What gives?

  In addition, for reference, the fonts I use are two Adobe Edge Web fonts provided within the Muse: League Gothic and regular Ubuntu.

  Hit it. It turns out that the problem is not the main, but rather the 'space before' and 'Space after' being calculated differently between the Design view and in Chrome. I was able to 'fix' by adjusting these two values. It is not very difficult, because there is still a chance that a line of text may wrap when I don't want that, or vice versa, but he should be fine for now.

• CDC: Difference between coherent and Simple mode?

  Hello
  
  I would like to know if anyone can explain the main differences between the two modes of the CDC?
  
  In fact, we are interested in implementing a DCC ODI asynchronous Oracle newspaper.
  But we would like to make sure that it matches our needs.
  
  I understand that the simple mode is on a table and the consistent on several articulated together.
  But my questions are:
  
  -Could we choose to log table for only some of the columns.
  -> If in my table, I'm not interested in the change of some columns, I can 'say' to the CDC do not watch?
  or the CDC can tell me which column had been updated?
  
  -in fact, I would like to know what is the difference between Simple and consistent? and if the mode is just a Simple mode for more than one table?
  Cause, we need to know what the source columns had been updated for each record, not only the primary key of the record being updated.
  
  I know that Oracle CDC allows it, but I don't know if ODI enable us to see only the columns that have been updated.
  
  
  Thanks in advance
  
  Brice

  Hi Brice,.

  AFAIK for a coherent CDC referential integrity must be set at the level DB (PK, FK).
  Personally I have never used any logical key, so I'd rather hear for a few experienced comments.

  Thank you
  Fati

• EzVPN between Cisco ASA 5505 (with NEM mode) and Ciscoo 881 Roure

  Hi friends,

  I configured the Cisco ASA 5505 and Cisco router with DMVPN 881. 3 offices works very well but one office remains failure. I did the same configuration for all facilities but this router does not work. Any ideas?

  Please find below the exit of 881 router Cisco:

  YF2_Tbilisi_router #.
  * 4 August 09:31:26.793: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH...
  * 09:31:26.793 4 August: ISAKMP (0): increment the count of errors on his, try 4 out 5: retransmit the phase 1
  * 4 August 09:31:26.793: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH
  * 4 August 09:31:26.793: ISAKMP: (0): 1.1.1.1 package sending 500 peer_port 500 (I) my_port AG_INIT_EXCH
  * 09:31:26.793 4 August: ISAKMP: (0): sending a packet IPv4 IKE.
  * 4 August 09:31:36.793: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH...
  * 09:31:36.793 4 August: ISAKMP (0): increment the count of errors on his, try 5 of 5: retransmit the phase 1
  * 4 August 09:31:36.793: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH
  * 4 August 09:31:36.793: ISAKMP: (0): 1.1.1.1 package sending 500 peer_port 500 (I) my_port AG_INIT_EXCH
  * 09:31:36.793 4 August: ISAKMP: (0): sending a packet IPv4 IKE.
  * 09:31:44.929 4 August: ISAKMP: (0): serving SA., its is 88961 B 34, delme is 88961 B 34
  * 4 August 09:31:46.793: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH...
  * 09:31:46.793 4 August: ISAKMP: (0): the peer is not paranoid KeepAlive.

  * 09:31:46.793 4 August: ISAKMP: (0): removal of reason ITS status of 'Death by retransmission P1' (I) AG_INIT_EXCH (peer 1.1.1.1)
  * 09:31:46.793 4 August: % CRYPTO-6-EZVPN_CONNECTION_DOWN: user (customer) = group = Youth_Facility_2 Server_public_addr = 1.1.1.1
  * 4 August 09:31:46.793: ISAKMP:isadb_key_addr_delete: no key for address 1.1.1.1 (root NULL)
  * 09:31:46.793 4 August: ISAKMP: (0): removal of reason ITS status of 'Death by retransmission P1' (I) AG_INIT_EXCH (peer 1.1.1.1)
  * 09:31:46.793 4 August: ISAKMP: Unlocking counterpart struct 0x8AA90C50 for isadb_mark_sa_deleted(), count 0
  * 09:31:46.793 4 August: ISAKMP: delete peer node by peer_reap for 1.1.1.1: 8AA90C50
  * 09:31:46.793 4 August: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PHASE1_DEL
  * 09:31:46.793 4 August: ISAKMP: (0): former State = new State IKE_I_AM1 = IKE_DEST_SA

  * 4 August 09:31:47.805: del_node 2.2.2.2 src dst 1.1.1.1:500 fvrf 0 x 0, ivrf 0 x 0
  * 09:31:47.805 4 August: ISAKMP: (0): the peer is not paranoid KeepAlive.

  * 4 August 09:31:47.805: ISAKMP: (0): profile of THE request is (NULL)
  * 09:31:47.805 4 August: ISAKMP: created a struct peer 1.1.1.1, peer port 500
  * 09:31:47.805 4 August: ISAKMP: new created position = 0x8AA90C50 peer_handle = 0 x 80004819
  * 09:31:47.805 4 August: ISAKMP: lock struct 0x8AA90C50, refcount 1 to peer isakmp_initiator
  * 09:31:47.805 4 August: ISAKMP: (0): client configuration parameters 87531228 adjustment
  * 09:31:47.805 4 August: ISAKMP: 500 local port, remote port 500
  * 09:31:47.805 4 August: ISAKMP: find a dup her to the tree during his B 88961, 34 = isadb_insert call BVA
  * 4 August 09:31:47.805: ISAKMP: (0): set up client mode.
  * 4 August 09:31:47.805: ISAKMP: (0): built of NAT - T of the seller-rfc3947 ID
  * 4 August 09:31:47.805: ISAKMP: (0): built the seller-07 ID NAT - t
  * 4 August 09:31:47.805: ISAKMP: (0): built of NAT - T of the seller-03 ID
  * 4 August 09:31:47.805: ISAKMP: (0): built the seller-02 ID NAT - t
  * 4 August 09:31:47.805: ISKAMP: more send buffer from 1024 to 3072
  * 09:31:47.805 4 August: ISAKMP: (0): ITS been pre-shared key and XAUTH authentication using id ID_KEY_ID type
  * 09:31:47.805 4 August: ISAKMP (0): payload ID
  next payload: 13
  type: 11
  Group ID: Youth_Facility_2
  Protocol: 17
  Port: 0
  Length: 24
  * 09:31:47.805 4 August: ISAKMP: (0): the total payload length: 24
  * 09:31:47.809 4 August: ISAKMP: (0): entry = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_AM
  * 09:31:47.809 4 August: ISAKMP: (0): former State = new State IKE_READY = IKE_I_AM1

  * 4 August 09:31:47.809: ISAKMP: (0): Beginner aggressive Mode Exchange
  * 4 August 09:31:47.809: ISAKMP: (0): 1.1.1.1 package sending 500 peer_port 500 (I) my_port AG_INIT_EXCH
  * 09:31:47.809 4 August: ISAKMP: (0): sending a packet IPv4 IKE.
  * 4 August 09:31:57.809: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH...
  * 09:31:57.809 4 August: ISAKMP (0): increment the count of errors on his, try 1 5: retransmit the phase 1
  * 4 August 09:31:57.809: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH
  * 4 August 09:31:57.809: ISAKMP: (0): 1.1.1.1 package sending 500 peer_port 500 (I) my_port AG_INIT_EXCH
  * 09:31:57.809 4 August: ISAKMP: (0): sending a packet IPv4 IKE.
  * 4 August 09:32:07.809: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH...
  * 09:32:07.809 4 August: ISAKMP (0): increment the count of errors on his, try 2 of 5: retransmit the phase 1
  * 4 August 09:32:07.809: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH
  * 4 August 09:32:07.809: ISAKMP: (0): 1.1.1.1 package sending 500 peer_port 500 (I) my_port AG_INIT_EXCH
  * 09:32:07.809 4 August: ISAKMP: (0): sending a packet IPv4 IKE.
  * 4 August 09:32:17.809: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH...
  * 09:32:17.809 4 August: ISAKMP (0): increment the count of errors on his, try 3 of 5: retransmit the phase 1
  * 4 August 09:32:17.809: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH
  * 4 August 09:32:17.809: ISAKMP: (0): 1.1.1.1 package sending 500 peer_port 500 (I) my_port AG_INIT_EXCH
  * 09:32:17.809 4 August: ISAKMP: (0): sending a packet IPv4 IKE.
  * 4 August 09:32:27.809: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH...
  * 09:32:27.809 4 August: ISAKMP (0): increment the count of errors on his, try 4 out 5: retransmit the phase 1
  * 4 August 09:32:27.809: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH
  * 4 August 09:32:27.809: ISAKMP: (0): 1.1.1.1 package sending 500 peer_port 500 (I) my_port AG_INIT_EXCH
  * 09:32:27.809 4 August: ISAKMP: (0): sending a packet IPv4 IKE.
  * 4 August 09:32:37.809: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH...
  * 09:32:37.809 4 August: ISAKMP (0): increment the count of errors on his, try 5 of 5: retransmit the phase 1
  * 4 August 09:32:37.809: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH
  * 4 August 09:32:37.809: ISAKMP: (0): 1.1.1.1 package sending 500 peer_port 500 (I) my_port AG_INIT_EXCH
  * 09:32:37.809 4 August: ISAKMP: (0): sending a packet IPv4 IKE.
  * 09:32:46.793 4 August: ISAKMP: (0): serving SA., his is 872E1504, delme is 872E1504
  * 4 August 09:32:47.809: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH...
  * 09:32:47.809 4 August: ISAKMP: (0): the peer is not paranoid KeepAlive.

  * 09:32:47.809 4 August: ISAKMP: (0): removal of reason ITS status of 'Death by retransmission P1' (I) AG_INIT_EXCH (peer 1.1.1.1)
  * 09:32:47.809 4 August: % CRYPTO-6-EZVPN_CONNECTION_DOWN: user (customer) = group = Youth_Facility_2 Server_public_addr = 1.1.1.1
  * 4 August 09:32:47.809: ISAKMP:isadb_key_addr_delete: no key for address 1.1.1.1 (root NULL)
  * 09:32:47.809 4 August: ISAKMP: (0): removal of reason ITS status of 'Death by retransmission P1' (I) AG_INIT_EXCH (peer 1.1.1.1)
  * 09:32:47.809 4 August: ISAKMP: Unlocking counterpart struct 0x8AA90C50 for isadb_mark_sa_deleted(), count 0
  * 09:32:47.809 4 August: ISAKMP: delete peer node by peer_reap for 1.1.1.1: 8AA90C50
  * 09:32:47.809 4 August: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PHASE1_DEL
  * 09:32:47.809 4 August: ISAKMP: (0): former State = new State IKE_I_AM1 = IKE_DEST_SA

  * 4 August 09:32:48.909: del_node src 2.2.2.2:500 dst 1.1.1.1:500 fvrf 0 x 0, ivrf 0 x 0
  * 09:32:48.909 4 August: ISAKMP: (0): the peer is not paranoid KeepAlive.

  * 4 August 09:32:48.909: ISAKMP: (0): profile of THE request is (NULL)
  * 09:32:48.909 4 August: ISAKMP: created a struct peer 1.1.1.1, peer port 500
  * 09:32:48.909 4 August: ISAKMP: new created position = 0x8AA90C50 peer_handle = 0 x 80004818
  * 09:32:48.909 4 August: ISAKMP: lock struct 0x8AA90C50, refcount 1 to peer isakmp_initiator
  * 09:32:48.909 4 August: ISAKMP: (0): client setting Configuration parameters 88C05A48
  * 09:32:48.909 4 August: ISAKMP: 500 local port, remote port 500
  * 09:32:48.909 4 August: ISAKMP: find a dup her to the tree during the isadb_insert his 87B57D38 = call BVA
  * 4 August 09:32:48.909: ISAKMP: (0): set up client mode.
  * 4 August 09:32:48.909: ISAKMP: (0): built of NAT - T of the seller-rfc3947 ID
  * 4 August 09:32:48.909: ISAKMP: (0): built the seller-07 ID NAT - t
  * 4 August 09:32:48.909: ISAKMP: (0): built of NAT - T of the seller-03 ID
  * 4 August 09:32:48.909: ISAKMP: (0): built the seller-02 ID NAT - t
  * 4 August 09:32:48.909: ISKAMP: more send buffer from 1024 to 3072
  * 09:32:48.913 4 August: ISAKMP: (0): ITS been pre-shared key and XAUTH authentication using id ID_KEY_ID type
  * 09:32:48.913 4 August: ISAKMP (0): payload ID
  next payload: 13
  type: 11
  Group ID: Youth_Facility_2
  Protocol: 17
  Port: 0
  Length: 24
  * 09:32:48.913 4 August: ISAKMP: (0): the total payload length: 24
  * 09:32:48.913 4 August: ISAKMP: (0): entry = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_AM
  * 09:32:48.913 4 August: ISAKMP: (0): former State = new State IKE_READY = IKE_I_AM1

  * 4 August 09:32:48.913: ISAKMP: (0): Beginner aggressive Mode Exchange
  * 4 August 09:32:48.913: ISAKMP: (0): 1.1.1.1 package sending 500 peer_port 500 (I) my_port AG_INIT_EXCH
  * 09:32:48.913 4 August: ISAKMP: (0): sending a packet IPv4 IKE.
  * 4 August 09:32:58.913: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH...
  * 09:32:58.913 4 August: ISAKMP (0): increment the count of errors on his, try 1 5: retransmit the phase 1
  * 4 August 09:32:58.913: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH
  * 4 August 09:32:58.913: ISAKMP: (0): 1.1.1.1 package sending 500 peer_port 500 (I) my_port AG_INIT_EXCH
  * 09:32:58.913 4 August: ISAKMP: (0): sending a packet IPv4 IKE.
  * 4 August 09:33:08.913: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH...
  * 09:33:08.913 4 August: ISAKMP (0): increment the count of errors on his, try 2 of 5: retransmit the phase 1
  * 4 August 09:33:08.913: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH
  * 4 August 09:33:08.913: ISAKMP: (0): 1.1.1.1 package sending 500 peer_port 500 (I) my_port AG_INIT_EXCH
  * 09:33:08.913 4 August: ISAKMP: (0): sending a packet IPv4 IKE.
  * 4 August 09:33:18.913: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH...
  * 09:33:18.913 4 August: ISAKMP (0): increment the count of errors on his, try 3 of 5: retransmit the phase 1
  * 4 August 09:33:18.913: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH
  * 4 August 09:33:18.913: ISAKMP: (0): 1.1.1.1 package sending 500 peer_port 500 (I) my_port AG_INIT_EXCH
  * 09:33:18.913 4 August: ISAKMP: (0): sending a packet IPv4 IKE.
  * 4 August 09:33:28.913: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH...
  * 09:33:28.913 4 August: ISAKMP (0): increment the count of errors on his, try 4 out 5: retransmit the phase 1
  * 4 August 09:33:28.913: ISAKMP: (0): transmit phase 1 AG_INIT_EXCH
  * 4 August 09:33:28.913: ISAKMP: (0): 1.1.1.1 package sending 500 peer_port 500 (I) my_port AG_INIT_EXCH
  * 09:33:28.913 4 August: ISAKMP: (0): sending a packet IPv4 IKE.

  There is no DMVPN on the SAA. All that you have configured, is not compatible with the ASA or something another DMVPN then. At least debugging shows that there are some EzVPN involved.

  The debug version, it seems that there is no communication on UDP/500 possible between devices. Maybe something is blocking who?

• VPN3002 PAT-Mode and individual user authentication

  Hi all

  I have three questions about the VPN3002 connected to a VPN3005 in the PAT mode

  and with authentication of the individual user.

  First of all:

  Is it possible to use this function for several users to the

  private LAN.

  Because I tried this, but when we the second user has been authenticated one could not work more.

  Second:

  When we first meet is YES, can be the users in a group of dispute as the

  VPN3002 Client it self?

  Third:

  That is, when there is a router between the local private network and users?

  Because the field of authentication of user appears only when users

  are directly connected to the private lan.

  I tried with PAT, but this was not possible because the VPN3002 can

  different users.

  I think that it will be possible with NAT, but then I ran to my first question.

  concerning

  Karlheinz

  1 > it is the main function of the user authentication feature see here:

  http://www.Cisco.com/univercd/CC/TD/doc/product/VPN/vpn3002/3_5/get_star/gs1under.htm#xtocid13

  2 > users cannot be in the other group. Group is dependent of the what the 3002 cumulates in.

  3 > it wouldn't send other subnets connected to the private sector. The design of the 3002 is such that only the subnet behind it, is what it can do vpn for.

  Kind regards

• Firefox interface late bad (between tabs, menus from opening), even in safe mode.

  Switching between the tabs, playing GIFs, play YouTube videos, type some text, and open the menu of Firefox are sometimes lag.

  For example, sometimes when I click on a tab to view it, there will be a delay of one second before its content is displayed.

  I tried Google Chrome and it doesn't have this lag. My computer is powerful enough.

  I've tried safe mode, but the problem was present there, too.

  I tried to empty the cache, but not luck.

  I don't know what else to say, so if you want more information, please just ask! Thank you.

  I tried this and disable the Manager of Session add-on and Firefox seems to be back to his usual quick self.

• Setting port channel between UCS - FI and MDS 9124 (Mode F)

  Dear team,

  We tried to create the channel of port between UCS FI and MDS 9124

  But the port channel do not take action in mode F on MDS 9124

  FI is in host FC end Mode

  We have allowed FC uplink on FI trunking

  We have activated NPIV on MDS

  We have activated the MDS trunk

  FI and MDS in default VSAN

  To check that we have changed the way FI FC channels mode and switch port became active, but in E mode

  When we enabled CF trunking of uplink on the port mode FI channels and FC Switching became active in mode TE

  but in both cases above, showflogi database shows WWPN of SAN alone does not have the any fi.

  How to achieve this?

  Have read that no need to change the mode switching mode of CF swicthing and keep FC Endhost way

  SO how to channel ports with mode F MDS and FI (Display Mode as NProxy)

  What is it has nothing to do with the MDS NX - OS version? (https://supportforums.cisco.com/thread/2179129)

  If yes how to put as license for ports came with the camera and we don't have any CAP/PAK or license file as she came

  with license

  Also, we saw 2 files available for download (m9100-s2ek9-kickstart - mz.5.2.8 .bin and m9100-s2ek9 - mz.5.2.8 .bin b b) to use

  Thanks and greetings

  Jose

  Hi Jo Bo.

  What version of the software if your MDS race?

  On your UCS do connect nxos and show ficelleStringString ficelleT inteface and find the mac address.

  It is possible that you could be hitting the bug below. If this is the case, you may need to update the firmware on your MDS.

  Add MAC YES '002a6a', '8c604f', '00defb' for 5 k/UCS-FI

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCty04686

  Symptom:

  Link change cannot connect any other Nexus or other Cisco Switch in mode VAN with a port channel F.   Question can be viewed in older versions of 5.1

  5.1.3.N1.1a

  but not later

  5.1.3.N2.1c

  Release. Question is also found in

  5.2 (1) N1 (1)

  and

  6.0 (2) N1 (1)

  and later versions.

  Conditions:

  Nexus configured for the link SAN PortChannels or NPIV Nexus mode connected to the UCS via regular F port channel where UCS VAN VAN edge mode switch: YES switch manufactured FI or another Cisco UCS Port WWN: xx:xx:00:2 has: 6a: xx:xx:xx or xx:xx:8 c: 60:4f:xx:xx:xx

  Workaround solution:

  Turn-off on Nexus 5 k TF-port question link mode does not happen with standard F-PORT SAN to remove Portchannel config

  Other Description of the problem:

  To check question collect please see the flogi-event history internal errors whenever the port is attempted OLS, AMENDMENTS, PBA counters will increment. This can be determined via the following output, view port internal info to see all the internal-historic port of error events

• The host of the firmware - difference between simple and advanced option.

  Regarding host package firmware -.

  With the help of advanced option, we can improve specific server as the MMIC or BIOS subcomponents.

  When I select the basis, what it means... I can this card to a service profile and associated with a blade and pass the respective adapter specific to blade and Mmic and bios respectively?

  Who is the best practice?

  Simple or advanced. ?

  Shyam,

  IMHO it didn't no difference at all in that respect, to which one is the best. The HFP to determine the firmware of the various components through a policy.

  In advanced mode, you must know the specific "hardware" present on the server that uses a Service with the created HFP profile.

  In simple mode, ALL (cf cards, BIOS, CIMC, adapter, etc.) is selected material possible check-in a HFP, which will decide on the 'mistakes' of the user.

  If you use advanced mode and you do NOT select anything, this piece of 'material' will simply not use the same firmware that others selected; simple mode is just easier, faster and error free.

  The answer to your question is simple... 'Yes', the simple mode selects all what you need to manually select Advanced mode.

  Note THE answers useful.

  -Kenny

• Persistence of extension Illustrator between close and open again

  I create an extension in eclipse that redirect a web where I have connection and I have the possibility to connect the Panel and don't forget the user.

  All works well, but if I close illustrator and open once again, I think that it does not record this information and I need to connect again.

  I use windows 8 and chrome as default browser.

  It's something on the configuration of the cookies? In Xavier are enabled.

  How can I activate the persistence of my extension between close and open illustrator variables? It is a web application.

  Best regards

  José Couso

  Hello

  Yes, later versions have activated persistent cookies.

  Best regards

  Hallgrimur

• Firefox crashes all the time when I open it. I'm unable to open it in safe mode and reinstall the app did not work.

  I've been running Firefox v. 18.0.2 and for a few days the application continually crashes whenever I open it. I am currently not able to enter in safe mode and it happens to all profiles on the computer. I went through and updated all my Add-ons, but the problem persists. I decided to re - install the application by deleting all the configurations that have been previously configured. I also tried to delete the entire folder to % APPDATA%\Mozilla. Up to this point, I am unable to get Firefox running.

  Try to remove the profiles.ini file to force Firefox to create a new default profile.

  • http://KB.mozillazine.org/profiles.ini_file
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• MacBook Pro opens to the screen and progress bar gray, freezes when the progress bar ends. Have tried several options to get into safe mode and suggested strikes, but can't. Any suggestions?

  MacBook Pro opens to the screen and progress bar gray, freezes when the progress bar ends. Have tried several options to get into safe mode and suggested strikes, but can't. Any suggestions?

  Here are some links from Apple which may help

  How to choose a boot on your Mac - Apple Support drive

  On the screens, you see when you start your Mac - Apple Support