Abandonment of the façade panels remote mess program

Similar Questions

• Server does not support remote façade panels

  Hello.  Hope someone has an idea about that.  After the computer host and update cDAQ 9139 LabView SP1 from 2013 to 2014 LabView dev suite shipped by NOR, I get the error "server does not support the remote panels" when you try to view my remote panel.  Before the update it worked normally.

  I went through everything in the list in this document, http://digital.ni.com/public.nsf/allkb/C23EF1551D8C52ED86256B140073EE2E and can't find anything that will solve the problem.

  I have rebuilt the application in 2014 of LabView (I even tried a new simple project with a single loop, one of the temperatures and a remote control), rebuilt the build spec and get the same error.

  "I've re-edited the web page and checked in the html code it refers"CODEBASE ="ftp://ftp.ni.com/support/labview/runtime/windows/2014/LVRTE2014min.exe" and I have, according to MAX, LabView DURATION 14.0.1 installed on the host machine.

  If something has changed related LabView 2014 which would cause a new firewall as this remote façade program worked great with 2013 installed?  I've already added that LabVIEW 2014 and all other related apps through the firewall, including the web server.  I am also on a machine that doesn't have a Bluecoat, our company network/internet security suite is installed.

  Thank you

  Michael

  Another possible solution to this problem - operator error.

  See one of my other posts here for details, but I made an assumption about the port numbers and what they apply to.  Two key points - the port of the web server application in the configuration of hardware web page is not the port used to access the remote panel - port is assigned in the properties of the device, the server settings remote control panel in the project.  And they cannot use the same port; This will also lead to the error "server does not support the remote panels.

  Note to the NOR - you must add this to your KB document on the resolution of this error.

  Thank you!

• NEED HELP FAST - façade freezes when I run my program. I have all the events to the interaction of the façade. I don't have a chance to launch an event that I can't even click on anything whatsoever on the front panel?

  All,

  I'm pragmatic disabling most of the façade with a particular event. This freeze happened when I launched this event and then stopped the program in the middle of the event. While the program has been frozen at all times no matter how many times I turned on my computer and turned off and restarted labview. I tried with pragmatism, allowing some of these objects on the front façade of the loop of events without result. What else could it be? When I select the program stops at the structure of the event and is waiting for him. When I have a finite number of thread for the time terminal timeout the timeout event runs and then waits for the structure of the event and I'm still not allowed to do anything.

  Aaron

  Yenkip,

  OK, the moral of the story when programmatically disabling an object to front panel make sure you have the code that allows very early in the program, changing constantly in the middle of the program changes its active status. I tried enabling some of these objects, but not all. When I tried allowing each of them, I realized that everything in the deactivation of the tab control tab control disables not only the ability to change the tab control. IT WASN'T THE STRUCTURE OF THE EVENT. The guys help OR on the phone told me that the structure of the event was obviously the question. I'm fine now.

  Thank you

  Aaron

• How to view Subvi on the secondary monitor with remote panels?

  I try to have a Subvi, called from a VI hand open on a secondary monitor.  I use panels remote to control my main application, which is open in a web browser on the secondary monitor.  I tried to adjust the monitor properties VI - Position of the immediate window - to '1' and also tried to set this value programmatically by using the node property of front panel, but doesn't seem to work.  My Subvi always appears on my primary monitor.

  I use LV 8.6.1 RT and my application is running on a CRIO.

  I'd appreciate any help.

  Thank you

  Dan

  
  

• front panel remote with firefox

  Hello

  I used to publish screws on the 8.6 LV Web server, not the problems of witkout, but with workaround solutions, it entered into deployment.

  Now, to try similar things and are having problems.

  I use 2010sp1 (english version) LV on a German XP Professional with the German Version of browsers.

  To start simple, I used the web publishing tool.

  When I do a simple snap of the VI, it works very well with all browsers. When I turn on remote it works only with the

  IE (7 in this case), but only if I disable the Kaspersky Firewall (exe of the VI is included in approved programs)

  Opera (my favorite, here 11.5) asks a missing plug-in, but displays the header text and footer

  Firefox not similar but shows only a small icon for the missing front.

  I am well aware of the http://digital.ni.com/public.nsf/allkb/151BE12C055F57CE86257043006CB4B3?OpenDocument

  and the fact that insofar as I understand that "nplv2010win32.dll" is present when it is intended.

  The list of the addons/plugins in anf Opera Firefox the two metion the plugin.

  I hope that it is not true that remote Panel does not work with IE execept, as one of my colleagues mentioned.

  Gabi

  Hi Gabi,.

  Unfortunately, your colleague is right.

  There are problems using remote façade of LV in the latest versions of firefox.

  It has been possible with firefox 1.x.

  Opera is not supported for remote access of façade.

  In fact, IE is the browser more stable and reliable for the remote façade LV panels.

  Regarding the Kaspersky Firewall:

  Please can you check if all ports which are used in the Web of LabVIEW server are open...
  The ports used by the Server Web LV you can find in the settings the LabVIEW server options.

• programmatically set the colour of the façade

  Hello

  Is there a way by which I can set the colour of the façade. I want to do it programmatically in a large number of subvi.

  Kind regards

  Pavitra

  Just in case where you struggle to find.

  

  This code gives me a dirty blue color on the front panel...

• additional window on the façade

  Hello

  My front panel has 4 large graphics should be exposed to my experiences at all times. However I have to add some fucntionalities, perhaps to change the voltage range,... get a trend of the previous information... (is still under development). I wanted to be able to click a button and a small window appears with this information, buttons, graphics... From what I've read in the forum may do with a sub - VI? What do you think? I'm not keen on the use of the tabs or scrolling to the bottom of the screen.

  Thanks for your help!

  I had a very similar problem. What I ended up doing puts my edit controls in a Subvi and then by creating a few buttons associated with a structure of the event.  The event was set up to look for a change in value of some buttons.  You place the Subvi in the event and do a right click on it and go to "Node Sub - VI settings". Select the options "Show Panel when called before" and "Close afterwords if initially closed.  In your sub - VI, set up a loop that has sort of a stop button. When you click the stop button, the VI would end and you will still have access to your original façade.

  Hope that helps!

• Is there a way to put the façade of a VI incorporated into the façade of another person, including an object tab?

  I have a stack of sub - vi each of them brings a similar content.  I want to be able to visualize and control the sub - vi through the VI main/call.  Is there a way such that wrap in the tabs of the main vi?  If I change the sub - vi will be proliferated in main vi?  How to make this work?

  You can use a panel of sup object to incorporate the façade of an another VI in your vi.

  Theres a small example for you get started.

  https://zone.NI.com/reference/en-XX/help/371361G-01/lvhowto/loading_panel_in_subpanel/

• How do I move the control of hypertrend OR the façade of Labview

  Hello world

  Please, I would like to know if the control hypertrend OR the palette of the DSC can be move in the whole of the façade and how.

  Once I put this control on the front panel, it just stays where I put and not allow me to move it.

  I'd appreciate any suggestion on this.

  Thank you.

  Left click in the top left of this > hold down and drag a box around it. It selects, and you can drag. It works for me.

• Save the façade in PDF or JPG format

  Hello

  Someone out there who have no idea how to do this?

  I want to save the appearance of the front of my VI as JPG or PDF, or BNP, do not use PrtSc ctrl

  I know that I can use call node to save a chart as a BMP file, but I can do the same thing with the look of the façade

  Below is the cover I want to make a picture, automaicly by pressing a button in Labview without leaving the program.

  smercurio_fc wrote:

  I'm not sure I understand. You use the Front Panel method: Get Image? That returns image data, and you can wire that directly to the functions of three graphics (BMP, JPG or PNG). With respect to the PDF, you must have installed a PDF printer driver. Search the Forum, as has been requested before many times, and various programs have been suggested.

  

  Just to...

• Move the controls the façade of a VI. How do you get a reference to a whole "grouped" controls?

  Fundamental problem (boring, if not disastrous - but common - at least for me):

  When you try to two sktick different screws together and you copy the block diagram from one to the other, it sticks all the controls in the middle of nowhere.  Then, you will need to spend about 10 minutes by dragging controls to the screen from one end of the diagram to another - sometimes more than 15 screens.  Surely, there must be a better way?

  * Either by the way, you might think that labview would have this kind of parameters in the 'properties' of the control in the right click menu - but not joy.

  I guess the obvious thing is that you can write a VI that will get a reference to a particular control, then say together, that is the position (x, y) to zero.  The only thing is that generally, there will be a selection of controls, and often they will be organized nicely - after bring them to zero that you don't want to rearrange their new.  I tried grouping, controls, but then the problem is - how to get a reference to a group of controls.  If you move one of them it does not keep the spatial arrangement.  At this point, I lost - and easily spent more time that should fix this problem.

  Any thoughts?

  If I understand you correctly, when you copy the block diagram of the second VI in the first, the controls of the second end of VI place far-field on the left on the front panel of the first, correct?  I think that these added controls will maintain their relative positions between them so you should be able to find them all as a group in the left field. Then it's all just a matter of how to get them enmasse to the rest of the controls on the front panel. There are some easy ways to do this. There is a button on the toolbar at the top of the front window that allows objects to resupply/group/dissociate the façade. You can select all the orders/lights out in left field and ' ' together them. (As an alternative, you can also drop them all on a tab control that will serve as a container for them). Then you select this group and with selected scroll back on to the existing façade and search and select (shift) ALSO a control/indicator to group existing too. Then with the TWO existing of the selected control and the new group (or a tab with the new group control) selected using the ALIGN buttons to quickly bring a corner of the new group in the alignment of the old control. At this point, you can unlink the news and move it where it should be.

• rtexe works solo con el Panel remote

  Hola,

  Developing application of dataloggin una estoy para UN compactRIO con driver NI 9012.

  Cuando hago carga del practicable in el driver not sell me any error message. El rtexe as genero lo tengo configurado para that run al arrancar el sistema, y con el System Manager veo if carga todos los live.

  The problem that I have are el rtexe solo works correctamente cuando me conecto con el Panel remote al vi main dentro del rtexe mediante "Operate" is "connect to remote Panel. In cuanto me desconecto, el vi sigue cargado in memoria del driver, y según el System Manager, ejecutandose, pero are no hace lo that hacer has.

  Thank any pista me ayude a resolver este problema.

  Gracias y saludos.

  Hola nuevo,

  Bueno, it seems that there is me works correctamente. What he hecho ha sido sustituir some variable value por property nodes there are me works correctamente.

  Saludos

• The Canon 70 d remote flash trigger

  Which Canon speed light will work off camera and be triggered by the functionality of firing the flash in camera remotely?

  The native (built-in) flash trigger IS.  This is an optical trigger and requires line of sight to the off-camera flash.

  The 430EX II can be a 'slave' (flash remotely triggered), but may not be a master.  The 580EX II can be a master or slave.  600EX-RT can also be a master or slave (and can no optical or by radio but radio requires a radio trigger - sells Canon a dedicated radio ST-E3-RT trigger or an another 600EX-RT flash can be used as a master/trigger.)

  The built-in flash uses pulses of light (visible light) to communicate with slaves and relay instructions.  It is not infrared or radio.  But the receiver in the slave flashes is on the lower part of the body (not in the flash head upwards).  The front of the lower part of the body has a tint red Panel that resemlbes what you would see on an infrared remote - leading people to assume that it is IR it isn't visible - IR

  If the remote light does not pull when the flash on the camera goes off then lower unit may not have good lighting of the view.  Keep in mind the 430EX II 580EX II and 600EX-RT that all have a flash head that can tilt AND turn left and right.  This means that you can rotate the lower part of the body of the flash so that it points to your camera, but always turn the head so that it points toward your subject.

• When I select a local adjustment, how can I scroll the new adjustment panel with the default panels

  In lightroom in the develop module. When I select a local adjustment for example the Brush tool or the gradient tool, the adjustment of the particular tool panel appears in the sidebar where I can make adjustments to these tools (see figure below).

  
  

  Now my question is with this adjustment Panel, it seems to be coming overlap on top the other default settings (for example the "base Panel" - exposure, contrast etc) and when I scroll down on other settings, the Brush tool or the gradient tool adjustment panel is always on top and does not scroll with the default settings.

  
  

  I would like to change the setting of this kind that the adjustment panel is part of the other default settings in the module development and scrolls with them.

  I know this is possible because I saw online videos where this is the case, and my lightroom on another machine for this.
  If anyone know how I change the setting for this?
  
  
  

  
  

  It seems to depend on the actual size of the Lightroom window. Just messing around with the CRD and LR5 onto my retina MBP 15 "with a monitor 1920 x 1200 and the two Lightroom versions scrolls happily adjustments table so that others, but only if the size (i.e. the height) of the Lightroom window is below a certain level. Done on the screen retina, when the display is set to 'Better for the retina', the Panel scrolls with others. But if I change the screen resolution of 2880 native and expand the LR window to fit, then the settings panel does not scroll.

  Similarly, if I move LR for the monitor external, same thing, i.e. Panel does NOT scroll when the window to maximize LR, but it does not scroll when I lower the height of the LR window (seems to be around the mark 1600 pixels)

  It's the same with LR5 and even on the Windows platform. I think he has somehow based on the height of the Panel adjustments with regard to the total height of the LR window, i.e. the settings panel does not scroll when there is enough space in the right panel to allow the eyes of one or many of the other tools below.

• View local files, test, AND distance in the files - CS5 Panel

  Of course, you can see the local files and remote files side-by-side in the files Panel, or you can see the local files and test files side-by-side but, is it possible to see all 3 at the same time in the files Panel?

  All my code changes are on the files in WampServer on my local machine. Because I work on a team of developers, we use code DVCS management and the merged code is loaded on our test server. And, of course, after the test, the code is loaded on the production server (remote server).

  It would be useful to see the files in all three locations simultaneously. Does anyone know if this can be done in Dreamweaver?

  Tuonela wrote:

  Of course, you can see the local files and remote files side-by-side in the files Panel, or you can see the local files and test files side-by-side but, is it possible to see all 3 at the same time in the files Panel?

  N °

  If you want that Adobe consider adding this feature, please submit a request via the form at https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform.