How to view Subvi on the secondary monitor with remote panels?

Similar Questions

• How to configure the secondary monitor to be a principal?

  I can extend my desktop to a secondary screen, but when I try to set the secondary monitor as primary monitor screen goes white on the secondary monitor. How can I set the secondary monitor as master?

  Hello

  This option is not possible with laptops. As you can see, this option is grayed out and the screen of the laptop is on a primary without any possibility to change.

• Tecra M5: How auto to activate the secondary monitor?

  Hello

  When I my Tecra M5 with full-screen dock and turn it on, I would like that it allows to automatically activate the secondary monitor and set it on the primary monitor. Currently, when home he doesn't - and I have to manually enable the second monitor and place it in the primary.

  Any ideas?

  Thank you
  Fraser

  Hi Fraser

  As far as I know it of not possible to set the external monitor as the main screen on startup.
  But what the graphics card is installed on your laptop?
  On the Toshiba site I found a new version of the Intel display driver.
  But is it possible to automatically activate the external display and set it to the main monitor without using the docking station?

• 10 Firefox: Bookmarks Menu sparkles and is unusable on the secondary monitor

  After the upgrade to Firefox 10, the menu of bookmarks (and other features of the user interface) began to blink when selected. This only happens on my secondary monitor. It does not affect my main monitor. It makes Firefox unusable on the secondary monitor.

  Try turning off hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  If disable hardware acceleration works then check if there is an update available for your graphics display driver.

  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers

• Safari opens on the secondary monitor

  I have two monitors 27 "and Safari insists on opening on the secondary monitor, no matter what I do. All this experience and have you been able to solve it?

  Whenever it happened, it was because I dragged a window or a tab there.  At one point, I closed Safari.  Then when I opened it again, he would open the 2nd monitor.

  What I did:

  When Safari opens on the screen 'wrong', enter a tab open and drag it to the other monitor, then let go.  You should have Safari open on both monitors.  You must also have a menu bar of Safari on both monitors.  Open the window on the monitor that you don't want Safari to open with.  The Menu, file, close this window (command-W).  You should now have that a single Safari window open on the monitor of your choice.  Go menu, Safari, quit Safari.  Then try to reopen the Safari.  It should open on the screen of your choice.

  I can't find a setting for the default screen for Safari.

  If this happens again, make sure the last window you are closing is on the screen of your choice.

  I hope this helps!  Let us know...

• Notepad opens off screen on the secondary monitor

  Hello

  Please bear with me as I'm NOT a Windows person - I usually run Macs. but I'm back to my parents and it's their Windows box.

  They are running XP Home SP3. This problem affects all user accounts.

  Basically they run a 2 monitor setup - a LCD, a somewhat old (although still perfectly!) Dell CRT reference. The question is about the latter.

  Note, I asked my father and he assures me that no applications have been installed since he first noticed this problem. I tried to solve problems better than I can, but I don't have Macs, Windows!

  Basically, the notebook want to open on the secondary monitor (running its native resolution of 1024 x 768) completely off the screen (to minimize it, maximize, and close buttons are unavailable). The only way I found to fix it is to reduce the resolution of 600 x 800 and then back to native, but he is a bit of a PITA bread as she has to do every time. As far as I know, the notebook is the only application affected and no new software--or drivers--have been installed since this question bagan occurring. Windows Update is configured to run automatically, even if I don't remember the last time she did it.

  I'm sure there must be a quick solution, and easy for this question - if someone would just enlighten me as to what it could be!

  Thank you very much

  Sarah

  Please bear with me as I'm NOT a Windows person.

  And I'm not a person dual monitor, so I'm not positive that it works.

  When Notepad opens, there will be a tab in the taskbar. Click on this and select move. Now, use the arrow keys to get to the screen. Close all other windows except this one and use the cursor to drag the message to the format full screen, or any size you want. File | Output and Windows expected to retain the size when you open it again.

  Bruce Hagen MS - MVP [Mail]

• How can I Albums in the Photo App with images taken at different times.

  How can I Albums in the Photo App with images taken at different times.

  I had books in Aperture and iPhoto which have been labeled 'Family', 'Friends', etc., and I would like to move the images in the album, and there no matter when it was taken.

  Thank you

  Brian

  In the same way. Make an Album and drag the images to him. Key word or images and the use of the smart Albums.

• DVD how much we need for the files backup with backup and restore program?

  Hello how are you?
  DVD how much we need for the files backup with backup and restore program? Y at - it large differences in the time and space between write backups on DVD and external hard drive?

  I do not understand your question.  Asked how the space has been used on your C: drive and you answered 60 GB.  Now you say your PARTITION C: is 60 GB with only 20 GB used?  I really don't understand what you're so confused.  It's simple arithmetic grade 3rd.  What is space you USED on the C: drive, that multiply by 0.7 to obtain the amount of space will be used on your backup disk after compression.  Divide this number by 4.7 and round.  That's how many DVDs you'll need if you insist on the use of DVDs for backup.  Then

  (1) If you are using 60 GB, the answer is (60 x.7) / 4.7 = 8.936.  I rounded up to 9 and added 1 just to be sure.

  (2) If you use only 20 GB, the answer is (20 x.7) / 4.7 = 2.97 rounded up to 3.  Add 1 and get 4.

  If you use only 20 GB, I am very surprised, because almost any important installation of Windows 7 is going to take more than 20 GB.

  All of this assumes that you do NOT use the Windows backup and restore program, but one that I recommended.  When I used the windows one, the results were several times the space that I used on my C: partition.

  Good luck.

• How long can you install the CS6 pack with the same serial number?

  How long can you install the CS6 pack with the same serial number?
  I have a new computer and you want to install it again.

  I already install twice because I needed to re - install on my old.

  you are allowed to two simultaneous activations.

  If you disable (help > deactivate) a previous activation, you can keep your two simultaneous activations and essentially install/activate an unlimited number of times.

  [moved from Creative cloud download & install download, installation, commissioning]

• Now I am unable to get the full screen on the secondary monitor. How to fix?

  Now I am unable to use the full screen on something else than my primary monitor.
  Years, I just clicked full screen on Youtube or anything else, and he would go full screen on the monitor that the program was on.
  What setting changed
  I'm running an AMD ATI 5450 Chipset Graphics Card Runinng 12.6 Software.
  4 GB of RAM Windows 7 Pro 64-bit

  Hello

  1. are you not able to use the full screen on the main or secondary monitor?

  2. what happens when you try to maximize or use mode full screen?

  3 did you changes to the computer before the show?

   

  Method 1: Updated display adapter () AMD ATI 5450) drivers and see if that helps.

  Download here: http://www.amd.com/us/products/desktop/graphics/ati-radeon-hd-5000/hd-5450-overview/pages/hd-5450-overview.aspx

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

   

   

  Method 2: Restore the computer to a date when it was working fine.

  Reference:

  System Restore: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions  

   

• remove the menu bar on the secondary monitor

  We use 2 monitors. We have upgraded to El Capitan and must be able to remove the menu bar on the top of the secondary computer.

  How can I do this?

  its been a while but it might be:

   > System Preferences > Mission Control

  turn on "screens have separate workspaces.

  and then disconnect you and back in.

• Opening Subvi in the same monitor like main vi

  How to make my Subvi to open in the same screen the main vi is in?  I tried the execution window position options, but that seems to fix the Subvi to a particular monitor.  I want the user to be able to drag the main vi in any available monitor and open the Subvi this monitor.

  Thank you

  Learn a few methods of VI:

  Before Panel.Run - Time Pos.Get - returns a bunch of default stuff including watching the front panel is on.

  Before Position.Centered Panel.Run - Time - specifies where the VI will appear the next time it is run.

  In addition, defining the position of the window may move between monitors.

  This might get you where you want to go.

  Mike...

• I can't disable the secondary monitor in XP

  its my secondary monitor display and I do not know how to disable

  Hi TaraRubio,

  ·         You have a Setup dual monitor?

  Check if the following items to help you.

  How to configure and use multiple monitors in Windows XP

  Two monitors: how to connect two monitors to one computer

• Multiple monitors: Alignment of the apps on the secondary monitor

  It does not appear that I can snap app windows 8 to the side of my secondary monitor as I can on my primary.  Does anyone know a work around it or if MS is planning on allowing it.  It would be nice to have messenger upward on the side of my secondary screen permanently.  Thank you!

  Hi DavidLeone56,

  I would say check your resolution on both monitors.  Please, check the following:

  To align the apps, you need at least 1366 x 768 screen resolution

  Article here.

  I hope this helps!

• pass-through of a Subvi to the next level with continuously running loops

  Hi all

  It is a very simple question, for some reason, data available as a Subvi indicator doesn't it up level vi. I think it might be something to do with the while loop I use, but I cannot understand, any help will be appreciated. I don't think I quite understand how data comes out of a loop constantly running.

  GPSdisplay runs a driver called GPS.vi (im not worried for my event structure immediately, which could be bad, but I am yet to test this bit yet) 1 probe should have the values of GPSCluster

  

  Loop in GPS.vi. GPSCluster (sensor 2) is updated correctly

  

  I can't work on why the data is not passed to GPSCluster at the top of page vi

  

  Hi bennymacca,

  I think that you are on the right track with a FGV. You can do quite easily with GPS vi you have.

  Before going further, your GPS while loop will return only the last reading and because the Boolean value of "Read" output state is set to FALSE, it will not stop. You see it out at all? The logic, I read, once entering this while loop, that he will not stop until said.

  There are 3 options you can try.

  (1) use a FGV, because you are looking in. To do this, you need to change the boolean TRUE State and set records in the GPSCluster - to analyze the information around, holding each time the vi is called and you leave. Outside the while loop you will thread to the top of the cluster to the indicator that you want to collect (OR you can have it inside the case statement where you read - be careful here, if).

  (2) in the main code, above the frame of the sequence, you can place the GPS vi while loop (the ' read' a), given the State of the boolean connected to a local variable of the Stop button. This while loop will start depending on how feels LV, wire, one line error for the two while loop and Frame (indicating that the two are to run in a parallel mode), OR you can put it in a case statement and say 'go' when you want to start playback. In this while loop, you can then copy the data to read directly in your variable Cluster that it is generated.

  But with (2), you move yourself away from the purpose of the GPS vi, which would be to bring all the features of the GPS functionality in a vi - which is a good idea.

  (3) put a condition on the State of the Boolean case "Read" statement - just make it TRUE when you want to stop reading the data (do you have a time or a condition, you can check here?). Even by doing this, you would / may still need to shift on your lease registers loop to keep the data for each iteration.

  I hope that all of this help. See you soon. David.