Ability to remotely change the settings of the BIOS on the Thinclients T610?

Similar Questions

• How can I remotely change the IP address of a host ESXi 4.1

  I have 2 VMWare ESXi 4.1 hosts who have been moved to the customer site.

  They are currently configured to use DHCP, but I need to return the two static IP addresses.

  How can I do this?

  I can do it in vSphere CLI?

  If so, how should I do this?

  I have never used vSpehere before CLI, so need a full breakdown, including please how to connect to the host...

  I have reviewed the documentation, but it's a little hard to understand.

  Thank you

  Hiya,

  You are able to get physical access to the ESX host?   I don't know if you can make the change remotely, because in order to change the IP address, you need to remove the network card.   Remove the adapter effectively cut off access to the network that you use for remote administration.

  Could you possibly get a 2nd active connection through DHCP network connected to the ESX host (must double NIC?)?   Then you could probably remote in on the 2nd link and delete/recreate the 1st.   Worth a try at least!

  Origin: VMware KB article (here: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=4309499 )

• The remote desktop icon - cannot change the settings & only appeared yesterday - have I been compromised

  Hello

  I had a quick glance around my system because I think it has been compromised. Today, I noticed something I never saw before a "Remote Desktop connection" icon in my documents - time created yesterday - at about 20:00 - 08/04 when I was not on the machine and certainly don't remember updated anything.
  I went into control panel / system/distance and unchecked boxes related to assistance remotely etc. Is there anyway that anyone can access my machine remotely? or how would I know if they have?  The sudden appearance of this icon and the calendar has caused me some alarm. I deleted it + at the present time, it is in the trash. I did it because it gives an error when I try to save changes to settings that do not allow access.
  Someone could give me some advice please on what this could be and how I can assure any remote access to my pc. (Windows XP / wired ethernet via Bt Home Hub connection)  Thank you.
  Hello
  If you think that your computer is infected with malware, try following the steps 1 and 2 in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove the malware more. If you have any questions, just ask me. I hope this helps you.
  Brian

• Linux or Windows cmd iDRAC access tool and change the settings of the bios/iDRAC remotely.

  Hello

  Is it possible to change the settings of the bios/iDRAC remotely via the tool command line Linux or windows for iDRAC8 based server?

  If so could you please provide the download location?

  w*w.Dell.com/support/home/us/en/04/drivers/DriversDetails?driverId=6RWMR

  You can install on a Windows machine and use the command "racadm" command line.

• Can Ping but not connect via Remote Desktop - how to change the settings of the outside LAN adapter

  I have a Windows Server 2012 machine connected to a Windows 7 Pro machine via a switch.

  Internet is shared on the Windows Server and the port sharing network has a static ip address. Similarly, the port connected to the Windows 7 Pro has a static ip address. I was able to desktop Windows 7 remotely from the server without any problem until very recently.

  Recently, I had to change some properties of the LAN on the machines and I was changing the gateway by default for the Windows 7 Pro, when I was hunting from my remote desktop session and I was not able to reconnect since. I don't know if I accidentally blew the subnet or the default gateway, but I know for sure that I do not touch the part of the parameters ip address.

  In addition, I can't ping the server computer but I am not able to connect via RDP. Please suggest any possible causes and solutions for this case. Both computers are remote and I can connect via the internet to the server computer.

  As my title suggests, I'm trying to find out if there is a way to reset the settings of the adapter LAN from Windows 7 to my server and proceed from that.

  Please let me know if you need more information.

  Thank you.

  RAM.

  Hi Ram,

  Please contact Microsoft Community.

  Problems with Windows Server 2012 are supported in the TechNet Forums. I suggest you send the request in Windows Server 2012 general Forums TechNet.
  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserver8gen

  Hope this information helps.

• Where can I find the ability to change the com port settings in Windows 7

  Where can I find the ability to change the com port settings in Windows 7

  Port, Device Manager, select comport, right click, properties, Port settings

• Change the settings for the Windows Firewall remotely

  Is there a way to change the Windows Firewall remotely stand-alone setting? I read that I can disable the firewall service using computer management and the connection to the remote PC but what I want is to change the settings.

  Best regards.

  You could do this with PowerShell as you have administrative access to the remote computer.  I would spend the TechNet forums, since it is outside the scope of this consumer site.

  http://forums.technet.Microsoft.com

• Our phone will make more phone calls, and we do not know how to change the settings to restore the capabilities of phoning.

  Our phone will make more phone calls, and we do not know how to change the settings to restore the capabilities of phoning.

  Greetings jenniferfrom46,

  From your post, I see that you are unable to make phone calls. I count on the ability to use my phone a lot to make calls, so I can understand your concern. I will be happy to provide you with some information for you.

  If you can not make or receive calls on your iPhone, this article goes on measures to take to help with the issue you are experiencing.

  Have a good!

• How to change the settings of the BT COM port with the Toshiba BT stack?

  I have a Tecra S11 with Windows7 64 bit and I need to connect via Bluetooth to a remote the BT series device. I want to use the BT interface on board.

  The BT remote appliance 38400,8, N-2 (stop to the most common place 1 2 bits). Problem: I find nowhere to change local BT Com port settings.

  The physical port HW parameters can be changed. See:
  HW COM1 with the port settings: http://i42.tinypic.com/epg5qr.jpg

  But I don't get the same tab for the port of BT:
  BT COM40 without port settings: http://i40.tinypic.com/24mcduw.jpg

  Not even the BACK order 'mode' allows me to modify the ports of BT

  Curiously, if I have the COM40 to a virtual machine on the same S11-tunnel (virtualbox), the machine virtual XP * can * change settings and communicate correctly with the remote device. How is that?

  Can _How Yes, I change the port COM BT with the Toshiba BT stack settings? _ my version is 8.00.12 (T), which should be the most recent available. I also updated the BIOS.

  Thank you
  Paolo

  Additional details.

  I tried to run the application as Administrator: still does not work.

  I crossed Win registry with regedit and gave all permissions to all users: still does not work.

  With the registry editor, I forced the port in 38400,8, N, 2 in 'HKEY_LOCAL_MACHINE NT\CurrentVersion\Ports': still does not work.

  Note that not only the application target complains, but also does not work the PuTTY used as a terminal series.

  The Toshiba BT application see the remote device were undetermined, serial port, Dev.B. No provider.

  I'm lost and stuck. Advice greatly appreciated.
  Paolo

• How can I get the airplay icon to appear? Changing the settings of firewall does not work

  How can I get the airplay icon to appear? Changing the settings of firewall does not work

  Hello Drjoe378,

  I understand that you do not see the AirPlay icon in iTunes on your Mac. If you have verified that your firewall is disabled or that the problem occurs regardless of the status of your firewall, there is a little more that can help return your ability to connect to AirPlay devices.

  1. Make sure you have the latest version of iTunes and Apple TV software.
  2. Connect your computer and other devices on the same network Wi - Fi. If you are using Ethernet, connect the two devices on the same router or hub. If you use the Wi - Fi and Ethernet, plug your device AirPlay the same router that your computer uses for Wi - Fi.
  3. Restart your computer, device AirPlay and network router.
  4. Because some Airplay devices include a power switch for AirPlay option, look for the option in the settings and make sure that the feature is enabled. Refer to the user guide of the device for more information.

  Use AirPlay to stream content from iTunes on your computer wireless
  https://support.Apple.com/en-us/HT202809

  All my best.

• How to prevent the Remote Desktop connections to change the refresh rate of premises?

  When remote users connect and that their system has a rate of refreshment, not supported by the local monitor, the display shows "this resolution/regeneration rate is not supported by the monitor." How can I prevent remote systems to change the settings of resolution/regeneration on the local PC?

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

  I hope this helps.

• Dell your 2161DS remote console switch cannot change the Admin password after updated to the latest Firmware

  Dear Sir:
   
  After having updated the latest Firmware [Dell your 2161DS digital switch, Firmware, Multi OS, Multi language, Multi system, v.3.1.0.0, 1.3 (A03-00)] and restore the default settings. We do this directly through the Remote Console software.  Seeing the log in window, the user name is "Admin" and there is no password.  We can access in the switch, but "Admin" a/c is missing from the "User" settings category. So we can't change the Admin password.
   
  Could you help us to change any password Admin password?
   
  Thank you
   
  Tim.
  
  

• My screen keeps dimming every few seconds, even if I changed the settings and saved!

  Hi I have Windows 7 and I have passed to the control panel and changed the settings for power. I got my high-performance switch mode, changed the settings so that it only fades every 10 minutes and saved. However, my computer keeps dimming of the screen at very low about every 7 seconds! I have to make it brighter, but it fades again! Sometimes it fades it right after she cheer up! I even tried to make a personalized plan, but it did not work. What can I do to make the screen stop all seconds dimming! I've tried everything!

  You are using a laptop computer monitor or a desktop monitor / external?  This is much like a monitor that has its own management food or, as with many TVs, the ability to change the brightness in response to changes in ambient light levels.

• Cannot view or change the settings of backup - error Code 0 x 80070422

  I am able to run a backup using the existing settings/settings I put when my system was new two years ago.  I just ran a backup and finished without any problems.  But when I click on "Change settings" to view the settings, I get the error code 0 x 80070422.  Error message States "the backup application could not start due to an internal error" followed by "the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  I already read many posts on this site about this error and how to correct.  I followed the suggested steps to fix the problem, but the error persists. =(

  Specifically, I checked that the following Services are enabled.

  -"Remote Procedure Call" (RPCSS) must be active, Automatic.

  'COM + Event System"(EventSystem) must be active, Manual.

  -'System Event Notification Service"(SENSE) must be active, Automatic.

  -"Volume Shadow Copy" (VSS) must be active, Manual.

  'Microsoft Software Shadow Copy provider' (SWPRV) must be active, Manual.

  I also ran an SFC scan and received the following confirmation at the end-

  "Windows resource protection has not found any breach of integrity."

  Any suggestions on the next steps, I could try to fix this? 

  Thank you!

  Hello

  Please provide detailed information on this issue and I appreciate your valuable troubleshooting efforts toward the resolution of the problem.

  However, we are still missing about two or three services so that this error happens when the necessary services are disabled.

  Method 1: Please check these services.

  • Block level backup engine - active - repair manuals
  • -Active - backup manual Windows

  If the settings above does not work, you can try to adjust Volume Shadow Copy (VSS) on Automatic and check if that helps. Then change it back to Manual after verification.

  Once you make changes according to the above specifications, you can try a backup and check to see if that solves the problem.

  If the problem persists, follow the next method.

  Method 2: Disable the antivirus.

  You can also try to temporarily disable the security software of the computer and try to create a backup and check if it works. If you are able to create a backup, you can contact the manufacturer of security software and check if you need to change the settings. Later, re-enable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Reference:

  Set up or change automatic backup settings

  Back up your programs, files and system settings

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• So in case of failure (RPC, change the settings of PC, Windows Store, Advanced Startup, everything!)

  remote procedure call failed on almost all applications and system options that have to do with the new interface user
  Windows store... whatever... I don't need really, but he's not here, and if that were the case, I'm sure it wouldn't work
  'Change Pc settings' does not
  sfc/scannow it has not resolved (it cannot fix some files)
  system restore failed (cannot cancel it, not sure if cancellation it gives me the option to restore up to what is 10 days back)
  Cannot run in safe mode for some reason any (computer ASUS, preinstalled Win 8)
  Cannot run advanced boot (remote procedure call failed once again)

  Sure that the pc refresh attempt fail too... even course, I have a DVD... pretty sure that I don't have one of them with my PC.

  WHY, Microsoft? WHY should I pay for your expensive failure if DIFFICULT software?

  How do I just update my files system in a RELIABLE WAY?

  WHY don't make you a process online CHECKS AND RESTORES all the files needed?

  Looks like I solved the thing myself, using this link

  http://www.howtogeek.com/222532/how-to-repair-corrupted-Windows-system-files-with-the-SFC-and-DISM-commands/

  Specifically, the second command, DISM, after the failure of the sfc.

  Be it resolved it or windows somehow repaired itself after the failure of the restore point recovery system and then... idk... maybe somehow made Windows to fix *, after awhile.

  Probably the DISM but... not a very public thing.