Academic journals, leading to the shutdown of Wifi

Similar Questions

• Cannot open the iMessage without wifi

  Strange situation. I have an iPhone and the iPad.

  I accidentally deleted some messages of iMessage for the iPhone.

  I have not turned on the iPad in several months, so I don't know the messages I deleted are always on the iPad. I want to recover the contents of these messages. The iPad has wifi turn off - it is in airplane mode, so it will not synchronize with iCloud and lose messages.

  However, when I turn on the iPad and go in iMessage, it appears a dialog box saying "sign in with your Apple ID to activate iMessage» But I can't go past it because the wifi is turned off. And if I turn it on, it will synchronize with ICloud and 'remove' these messages off the iPad also...

  Is there some way I can open iMessage without login or retrieve those deleted messages that are always on the iPad?

  FYI, messages are not synchronized with iCloud.

• The Airport Extreme WiFi intermittent 2nd generation

  I'm having a weird problem with loss of WiFi on my Apple Airport Extreme.

  My 2nd generation that apple Airport Extreme Base Station began to close its WiFi broad signal several times.  It happens usually after 60 minutes or less works very well.  Power on and the new runs for awhile until it stops again the WiFi.  Green light normally forward either static rest without flickering to indicate data transfer, or it will just dark.  Sometimes it will turn off WiFi and then restart WiFi a few minutes later and appear to be good.  But mostly it just stops and I can, he extinguished/turned on to operate correctly with the WiFi again.

  Airport Extreme is connected by ethernet cable to my modem/router main fiber (which is a different floor home) and it is set to "Bridge" Mode  It worked without any problems and I did no changes to my system.  My ISP did update my modem broadband fiber a few weeks ago to a "Virgin Media Hub 3.0"I understand was made by Compal.»  It seems to work perfectly and I have no problems with speed download or reliability in wireframe.  I was away from home for about a week and was able to access my wireless IP camera remotely via my Airport Extreme with no problems.  The problem started almost immediately on my return, but, as I said, I did no changes to my network.  I have never had this kind of problem before with my Airport Extreme.

  I am running OS X Yosemite on an iMac that is connected by a cable ethernet to the Airport Extreme and seems to work very well even when WiFi is de-energized on the Airport Extreme.  Airport utility reports the airport as current firmware version 7.6.7.

  I used network utility, Fing, and it showed that my Airport Extreme has multiple IP addresses, which seem to conflict with the IP address for my three AppleTV.  I manually changed the IP addresses of the Apple TV to another IP address not conflicting, but Fing always shows that my Airport Extreme has three IP addresses and I still have the problem of WiFi.

  Any other suggestions on a probable cause of this problem or the best way to solve the problem would be much appreciated.

  Thank you!

  The question is the 2nd generation AE is now too old.

  I would say the power supply (external or internal) is dying.

  It service life is approximately 5 years... your must be 8 years old. so the solution is simple... buy a new one... or I'll tell... Newish...

• My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green.  Wifi continues to operate even when the light is orange flashing.  Anyone know why this is happening?

  My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green. Wifi continues to operate even when the light is orange flashing. Anyone know why this is happening?

  The next time you see the flashing light amber...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Express

  If you see a button update, click on update the firmware on the airport

  

  Otherwise, find status and click on the little orange dot it. A message will appear to say why the airport complained and suggest a remedy for the issue.

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• It is possible, replace the antenna internal wifi iphone 5s?

  My iphone 32 5 s is perfect, like new, but since yesterday the anntenna internal wifi is broken. We can replace it in an apple store?

  I'm sure that the wifi antenna is broken is not a software problem.

• My macpro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  my mac pro is backup in the capsule of time even when I was at work, which means that the time capsule is consumed my data plan. Can anyone suggest a way I can have it the backup only when my mac pro and time capsule is in the same local wifi

  If the Time Capsule and MacBook Pros are not on the same network, the MacBook is not backup in the time Capsule. You probably see what snapshots leaving MacBook on the local disk, until the two are reconnected. If you don't want that to happen, disable Time Machine on a different network.

  Good day.

• I have a question please. Are the activation of wifi, Bluetooth and 3G while I'm outdoor consume the battery of my iPhone (6 s) and reduce its life expectancy?

  I have a question please. Are the activation of wifi, Bluetooth and 3G while I'm outdoor consume the battery of my iPhone (6 s) and reduce its life expectancy?

  If you want your Apple Watch to stay connected to the phone, you need to keep compatible BlueTooth.

  All functions of the phone will use up the battery life. Some things more than others. Screen brightness, low cell signal strength and location services are major culprits. If you are having battery problems, see this article:

  http://www.scottyloveless.com/blog/2014/the-ultimate-guide-to-solving-iOS-batter y-drain

  I don't know what it means being out of doors has to do with the question.

• When I try to shut down my computer with Firefox running it hangs and stops the shutdown process.

  When I try to shut down my computer with Firefox running, it does not close properly during the closing. Instead, it crashes (as described in this article) and will continue to do so until I have stop the shutdown process and close it manually, where it will still not respond. There is the substantive issue. Here is the list of the relevant data to identify more precisely:

  On the list of programs is still active during the closure, the window of Firefox starts only appearing once as it should be, but a few seconds after starting to hang, it begins to appear a second time on the bottom of the list, with the specific name of the page is a duplicate of whatever it is on the original.

  This problem does not occur in safe mode, but it is not caused by one of my addons either, as I figured out after disabling all my addons with tools > Modules rather than the safe mode and still the problem.

  He is listed as that passes several times a week, but that is simply because that's how many times I forgot to close Firefox before pressing 'closed' and leaves the room without bothering to check it works. It happens whenever I try to turn off the computer with Firefox is running well.

  See this article--> occurs not in Safe Mode

  Check and say whether his work after turning off hardware acceleration.

• on a late 2009 MacBook Pro 17IN HD had a power failure, leading to the replacement of the HD now, how do I get the 10. .  OS reloaded

  on a late 2009 MacBook Pro 17IN HD had a power failure, leading to the replacement of the HD now, how do I get the 10. .  OS reloaded

  You have the original installation media supplied with your machine? This would be a way: use the DVD to boot from, format the new hard drive and then reinstall the operating system. You can then update/upgrade to 10.11.

  Other than that, your model was not eligible to have its firmware updated to allow for the recovery of the internet which is the only other way I know - at least the only other way besides a bootable clone, you did before your defective hard disks.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  Do not think to partition/format your new drive first.

• How can I reset the old my wife's phone so I can use it and she can not remember any password or ID

  How can I reset the old my wife's phone so I can use it and she can not remember any password or ID

  Here are instructions, but she will need to recover his password: what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

  Help find the ID and the password: https://iforgot.apple.com/appleid#! & section = appleid

• iPhone 6, connecting to the Airport Express wifi, blocking all the other wifi equipment.

  Hello

  My home wifi network, it's an Airport Express station. I then several other devices that connect to it - two AppleTV, two MacBooks, an iPad and iPhone two 6.

  I recently had to replace one of the iPhone 6 and every time the iPhone connects to wifi of the Airport Express - the connection made the deadlock on other devices. This forces me to turn off the phone's wifi and now I do the connections of the hanging of the other devices start to work.

  The new iPhone replacement to restore a backup to iCloud. I also then reset the network than the iPhone settings when I first noticed this wifi connection problem, but the problem persists.

  Thoughts on how to fix this?

  My solution, after two devices, and visits to the Apple Store Genius bar was to do a full reset of the device and do not restore from a backup.

  For the appliance swaps were probably not necessary had we done the software reset and restore from scratch first.

  Geniuses and I were not able to find the cause of the problem.

• Re: Satellite A30 - can't turn on the radio for wifi?

  I have a computer Satellite A30 laptop that I recently installed an ATHEROS 802.11A/B/G internal Mini PCI card. It came with the Atheros Client Utility, I have also installed. Everything seems OK with the map and shows to work OK in Device Manager, but I can't get on the radio to the A30. (Enable radio is grayed out on the utility)

  Having read the manual about it and it shows giving the WiFi switch and also by using the Fn + F8 keys to enable, but it is impossible to get anything to work.

  There should be a light on adjacent to the WiFi switch but it remains off anytime... Any ideas what the problem may be?

  I seem to remember reading somewhere that a Registry Fix may be necessary to activate the switch from WiFi to the A30, is the problem? If so, where the patch is available from. Have tried to search on the net but no joy so far.

  Any help is appreciated!

  Hello

  the problem is these maps as the atheros cards doesn´t to work correctly with the your machine mini-pci bus, so the hardware switch is not able to trigger the map in Active mode.

  Here´s a small workaround solution, maybe it helps you:

  http://madwifi.org/wiki/UserDocs/MiniPCI

  Do so at your own risk and read correctly the instructions.

  Greetings

• How to use the shutdown command to stop another computer?

  I just saw the setting-m to the shutdown command and decided to give it a whirl. However, when I pointed out the computer in question, I received a message that "a required privilege is not owned by the customer.

  What should I do to be able to use my laptop to turn off my old desktop computer? Both are running XP Professional SP3.
  Sometimes, I like reading or watching streaming video on Hulu on the laptop while lying in bed, and sometimes I play music if do the first, which is stored in the form of MP3 files on the desktop (which I access via a share). Be able to turn the office without getting up would be nice, but you do not get this option with Remote Desktop.

  Here is the result, the office is "slickswintel" (he's old, and since when I went first from Mac to Windows 98SE, although it is now a double XP/98) and the laptop is "slickslaptop".
  Both machines have unprivileged called 'Slick' on them local accounts that are my accounts on the day the main day. I have a different admin account, but I only use it as needed and use runas as often I log in fact.

  What should I do to get the following to work? In spite of the passing the MCSA Exam, I never learned about this feature, so I'm not sure what I should do to make it work? It'll work on a workgroup or is it only for domains? While I could set up a domain with the copy of the server I got from Dreamspark, I really didn't need one.

  Microsoft Windows XP [Version 5.1.2600]
  Copyright (C) 1985-2001 Microsoft Corp.

  D:\Documents and Settings\Slick > shutdown /?
  Usage: shutdown [-I |-l | s | r-|-a] [-f] [m \\computername] [t xx] [-c 'c
  COMMENT'] [d up: XX: YY]

  No args display this message (same as to-?)
  -i Display GUI interface, must be the first option
  l log off (cannot be used with the - m option)
  s shut down the computer
  r Shutdown and restart the computer
  -an abandonment, a system shutdown
  -m \\computername Remote to cancel the shutdown/restart computer /.
  t xx Set timeout for shutdown to xx seconds
  -c 'comment' comment (maximum of 127 characters) stop
  Forces f - running applications to close without war
  Ning
  d [u] [p]: xx:yy reason for closing code
  u is the user code
  p is a planned shutdown code
  XX is the main reason (the positive integer code
  SS to 256)
  YY is the minor reason (the positive integer code
  SS to 65536)

  D:\Documents and Settings\Slick > stop s m \\slickswintel
  The operation completed successfully.
  A required privilege is not held by the client.

  D:\Documents and Settings\Slick >

  As a general rule, you must have administrative privileges on the remote computer to shut down this computer.  Given that both computers have XP Pro, you are halfway there (remote users always authenticate as 'Guest' on XP Home).  The computer that you are trying to close must have "Simple file sharing" disabled because otherwise you can not authenticate to this computer as anything except the user "guest".  So try to disable Simple file sharing, make sure that your user name and password are the same on both computers and make sure you have administrative privileges on the remote computer, and then you can stop the machine with the command "shutdown".

  "How to disable the file sharing simple and how to set permissions on a shared folder in Windows XP"
    <>http://support.Microsoft.com/kb/307874 >

  In fact, it's easier to use the remote desktop.  Even if you do not have a "Shutdown" option in the start menu, you can always open a command prompt window (start-> Run-> "cmd") and enter the command:
  stop s f t 35
  This will give you 35 seconds to logoff this computer before its judgment (assuming that you have administrator privileges).

  You can also look in the command "psshutdown' of the PSTools Suite
  PSTools: <> http://technet.microsoft.com/en-us/sysinternals/bb896649 >

  HTH,
  JW

• How to change the shutdown preferences in Windows XP?

  Original title: how to get the option in the list and selecting turn off computer option rather wide stand-by, turn off, restart icons in win xp sp3 proff

  standby Turn off reboot

  in the list

  Wait a second
  Disable
  Restart

  example of

  What do you do on the computer

  Hello

  I suggest you to see the steps in the link with the work on the issue.

  How to change the logon window and the shutdown preferences in Windows XP

  http://support.Microsoft.com/kb/291559

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  Hope this information is useful.