Access control with custom groups

Similar Questions

• Access control and security group

  Hi all

  I need to know about the access control and what data are suitable for the security group and roles if I have the script like this:

  i. There are 2 different app namely ARA (96 branches with different types of reports) and TRACS400 (6 branches with different types of reports)

  II al ' ARA, users of Branch01 can NOT check Branch02.

  III. different report type is measured by Branch01 and Branch02 are different.

  IV. in Branch01, there are some reports are Read (Cannot download) only and some reports are read and write (downloadable).

  My questions are:

  1. from the above scenario, do I need create all the 96 security group and assign it to different leadership roles?

  2. How can I control read and write access, as I have tested the READ access the user is still able to download the report.

  3. How can I control to branch 01, report Type A is a read and report Type B read and write access?

  4. I noticed that if I use the account, the security group can be used be limited to 50 only security groups. Is this good? I may be an application later in the future. These 2 request for test only. But if I do not use the account, there are any number of security groups that can be used?

  Appreciate for your help.

  Hi aziela

  As mentioned by the friends of the forum, it is advisable to have the minimum security group given that its impact on the scalability of the application (rule). Accounts provide the best security solution of dimension view group.

  Security group corresponds to the role, role is mapped to the users. The permissions are obtained at the level of role-SG.

  Accounts are mapped directly to users. So you can have a precise control at the level of the user (eliminating the abstraction of the role).

  All these aspects are impacting performance where rule of thumb is mentioned in the documentation. In general, if a user belongs to many groups and accounts then it will take more time to process the request of content for this user.

  w.r.t. prohibiting the read-only users so that they will not be able to download content, there is a setting, please try option mentioned in this link http://docs.oracle.com/cd/E14571_01/doc.1111/e10792/e01_interface001.htm#CACCFHHA

  WRT performance calculation, see http://docs.oracle.com/cd/E14571_01/doc.1111/e10792/c03_security003.htm#CSMSP143

  Hope this helps

• simulate the track access control with labview

  Hello

  I want to simulate a track with labview access control.

  This is the procedure:

  vehicle is located in front of a door, antenna check access control, if that's ok the traffic light turns green and the gate of the student.

  I thank very you much for helping me.

  Hi hot wheels,.

  I think it will be useful for you

• Is it possible to access control with data binding to the page

  Hello
  
  I want to know if we can access the datacontrol operations in the bean with managed to link these operations to the definition of the page.
  
  For example: I have a method in the application Module that is under the control of data and create an impression of the page with link of this operation to the definition of the page.
  I created a button on the page and when you click on the button it calls a method in the managed bean.
  Can I run the operation in the data from the managed bean code control? Can I handle for the data from the managed bean code control?
  
  Please let me know if this can be done or not.
  
  Thank you
  Stephanie

  Why you don't want to use binding for this? Is there a specific reason for it, or you want to just make life harder?
  You could write a managed bean that has a method that creates and instance of AOS and calls the method - and then just call managed method from your page bean.
  Something like this:
  http://download.Oracle.com/docs/CD/E17904_01/Web.1111/b31974/bcservices.htm#CHDIBHBD

• How to access controls QML custom in C++ code...?

  Hi all

  I create a custom dialog to display the loading popup and it successfully added in the QML code but I don't get way to access this dialog box in the code c ++ to close when the network connection is closed and the response is received from the web service.

  Here is my code:

  import bb.cascades 1.0
  
  Dialog {
      Container {
          preferredWidth: 400
          preferredHeight: 200
          background: Color.Black
          verticalAlignment: VerticalAlignment.Center
          horizontalAlignment: HorizontalAlignment.Center
          ActivityIndicator {
              id: loginIndicator
              objectName: "indicator"
              preferredWidth: 130
              preferredHeight: 130
              horizontalAlignment: HorizontalAlignment.Center
              verticalAlignment: VerticalAlignment.Center
              onStopped: {
                  if (errorTextid.text.trim() == "") {
                      var blogpage = goToWebView.createObject();
                      navPane.push(blogpage);
                  }
              }
          }
          Label {
              text: "Please wait... Logging In"
          }
      } // Container
      onOpened: {
          // Reset the fire alarm since it is opened.
          loginIndicator.start()
      }
  
  }
  

  Please suggest something

  Concerning

  Thank you simon for show the way finally I got this problem resolved

  Solution for this problem is:

  Dialogue * popUpDialog =
  BB::cascades::application::instance()-> findChild ()
  "LoadingPop");
  popUpDialog-> close();

• Access control with TCP. VALIDNODE_CHECKING

  Is this setting must be defined in the sqlnet.ora of all customers for the server validate applications for connecting customers?
  
  Matt

  It is located on the coast server, see Note: 462933.1 what is Validnode audit and how to use.

  Enrique

• Firepower does not work when using the Active Directory group as a rule filter access control

  I am PoV of Cisco ASA with the power of fire with my client. I would like to integrate the power of fire to MS Active Directory. Everything seems to work properly.

  -Fire power user agent installation to complete successfully. Connection to AD work fine. The newspaper is GREEN.

  -J' created a Kingdom in FireSight and you can download users and groups from Active Directory.

  -J' created a politics of identity with passive authentication (using the field I created)

  -Can I use the AD account "user" as a filter in access control rule and it work very well.

  However, if I create the rule of access control with AD Group', the rule never get match. I'm sure that the user that I test is a member of the group. Connection event show the system to ignore this rule and the traffic is blocked by the default action below. It doesn't look like the firepower doesn't know that the user belongs to the group.

  I use

  -User agent firepower for Active Directory v2.3 build 10.

  -ASA 5515 software Version 9.5 (2)

  -Fire version 6.0.0 - 1005 power module

  -Firepower for VMWare Management Center

  Any suggestion would be appreciated. Thanks in advance.

  Hello

  You should check the download user under domain option. Download the users once belonging to a group is specified on the ad and then test the connection.

  Thank you

  Yogesh

• Problems with "security access control list '.

  Hello
  
  My system is configured as follows
  UCM - 11 GR 1 material - 11.1.1.4.0 (Build: 7.3.0.180)
  -Database 11 GR 2
  OracleTextSearch - engine is used
  RoleEntityACL - component is enabled
  -Parts of my config.cfg

  SearchIndexerEngineName=OracleTextSearch
  IndexerDatabaseProviderName=SystemDatabase
  UseEntitySecurity=true

  I want to create lists of access control for users, groups, and roles. I followed the the next page http://download.oracle.com/docs/cd/E17904_01/ documentatoindoc.1111/e10792/c03_security.htm#CDDBCIDA
  Everything seems to work fine at first, because I'm able to add users, groups, and roles to the ACL of the document. The problem is that adding a user, group or role of the ACL of a document does not affect the rights of a user a of the document.
  
  Example:
  -Wear a read access to "public"-SecurityGroup
  -UserB is to check in a "document1" to the SecurityGroup 'public' and adds UserA to the ACL of "document1" give UserA 'read' and 'write' access to "document1".
  -The result is that UserA doesn't have to 'write' access to "document1", well it is in the ACL (same problem with groups and roles)
  
  In this scenario shouldn't UserA have "write" access "document1" or I have a bad understanding of access control lists?
  
  Thanks in advance
  Brahim

  You heard wrong...

  Permissions through ACL are subject to the same rules of intersection between the permissions granted by the intermediary of roles or accounts.

  If you want write access to a document, you must have at least write access to the security group of the document, account and have RW permissions in the ACL.

  In other words work ACL on top existing accounts/groups and roles that they do not replace the existing UCM permissions. You can restrict the permissions by an ACL but not grant permissions that the user has not already set for the account or the security group.

  And by are the ACL way ugly generally impassable and unmanageable so if you have to use them all to be very careful!

  hope tha helps
  Tim

• How to create user defined groups and users with custom permissions as only open and export in obiee 11 g?

  Hello

  I want to give as open & export to the level of permissions.

  How to create user defined groups and users with custom permissions as only open and export in obiee 11 g?

  For example, if the group permissions, inturn should reflect on the users.

  Please help me.

  Thanks in advance,

  A.Kavya.

  Your question is quite broad and fuzzy then I suggest the security catalog presentation to read documentation: http://docs.oracle.com/middleware/1221/biee/BIESC/mgrgrpsusers.htm#CIHIBJGD

  And I think that you mix you two things which are managed in different places:

  ) an object as read access permissions, write, delete... which control you through the object "Permissions" dialog box

  

  

  (b) functional privileges controlled through "Manage privileges" under "Administration".

  

• Big problem with user Microsoft Access control

  Hello

  I have to work around for CCleaner (UAC) user access control that begins after every time Windows starts as an auto start the program.

  Every time you start, I get the UAC prompt which warns me again and again.

  I don't want to disable access to the computer, but only for CCleaner user control.

  Creating a link like this: http://www.petri.co.il/bypass-uac-using-desktop-shortcut.htm there's no option for me, so I found this:

  http://www.microsoft.com/en-us/download/details.aspx?id=7352.

  I followed these instructions: http://www.ghacks.net/2010/07/08/get-rid-of-uac-prompts-with-microsofts-application-compatibility-toolkit/

  but it does not work. I always get the guests.

  What can I do?

  Thank you very much in advance

  George

  It would be impossible because it would create an immediate and global security hole.  For example, let's say you whitelist CCLeaner.  Then all viruses and Trojan horses in the world know immediately they can simply replace the file ccleaner.exe on your computer a copy of the virus and it will be automatically approved and completely take over your computer.

• VDI with ISE access control

  Hi guys,.

  Can ISE access control for VDI users with thinclients like PC? Now, we want to implement authentication 802. 1 x for the VDI users, but I don't know if this can be done by ISE. We just need to configure access switch ports to open 802. 1 x as usual and the switch will then relay the RADIUS to the ISE?

  Hello

  The link below can help you:-

  http://blogs.Cisco.com/borderless/using-TrustSec-to-simplify-virtual-desktop-infrastructure-VDI-deployment/

• My user is a member of the Administrators group, but I got ACCESS DENIED with some files?

  My user is a member of the Administrators group, but I got ACCESS DENIED with some files?

  I know the meaning of the trace, I did not sense trace in this sentence! Once again, I don't undrestand why a user as an administrator cannot access anythings?

  Administrators can access anything, but they often need to take ownership of a file or folder to open it. By examining the details of the property, the owner can easily say that an administrator has reviewed his file or folder.

• Custom form of OAF - access denied with code 400

  We get this question after the deployment of OFA custom forms in our development environment.

  Error in the apache log shows:

  [error] [client 28.1.6.95] mod_security: access denied with code 400. Pattern match. ^ ([-__ | #! = A-Za-z0-9 / :,.$()]) {0,255} ([-_ | #! = A-Za-z0-9 /:,. $ ()]) {0,255} ' $' in ARGS_NAMES.])

  We conducted last autoconfig and no change. Recorded a SR.

  I guess others have seen this issue in R12.1.3.

  Any suggestions will be appreciated.

  Issue lies in the ARGS_NAME parameter.  Comment security.conf of httpd.conf and follow the steps below. Custom forms OFA work without problems.

  1. Please stop services

  2 backup $ORA_CONFIG_HOME/10.1.3/Apache/Apache/conf/httpd.conf

  3. comment out the following line

  include "/... /... /.ora/10.1.3/Apache/Apache/conf/security.conf.

  After his comments it should look like this

  #include ' /... /... /.ora/10.1.3/Apache/Apache/conf/security.conf.

  4 restart the services and test again the question

• Create group style with custom name

  Is it possible to create a style with a specific name?

  Here is my code:

  myDocument.cellStyleGroups.add ();

  It creates a new group named "Style 1 group".

  Sure. Two ways:

  var myDocument = app.activeDocument;
  
  myDocument.cellStyleGroups.add( { name: "Custom Group Name" } );
  

  or

  var
      myDocument = app.activeDocument,
      styleGroup = myDocument.cellStyleGroups.add ();
  
  styleGroup.name = "Custom Group Name";
  

  If you want to use styleGroup later, you can use the second way.

  Don't forget that you will have to manually check check if the group exists before creating.

  Hope that helps.

  --

  Marijan (tomaxxi)

  http://tomaxxi.com

• Web services with customer LV

  A typical approach to web services to access the host (a cRIO incorporated, for example) by using a client running in a browser with JavaScript.  All those put in place a LabVIEW client that calls the web services on the host computer?  How this could be done?

  I have a cRIO with a RESTful web service work and I can access it with my browser.  It works very well.  Now, I want to access the same service using a LabVIEW client... Or I could write my own customer by BT if I new how to register the service with .NET, which I did not.  So, it's a fact that LV can be used to create a web service client.  I'm looking to better understand how it can be done.

  The native TCP VIs can perform HTTP requests and call the methods of Service Web LabVIEW (http://zone.ni.com/devzone/cda/epd/p/id/3153 or http://decibel.ni.com/content/docs/DOC-2230).  Using these screws, you can create a customer of LabVIEW.

  Alternatively, you can use an ActiveX control to the browser with the Navigate2 method to call Web Services:

  

  WSDL files are generally used for Web Services using the SOAP Protocol (Developer Zone Tutorial: LabVIEW using SOAP Web Services call).  I know that it is possible to do the same for a RESTful Web Service (LabVIEW deploy services RESTful web), but I don't have any information on how this is done with a simple Google search in addition, it seems that most of the other public forums has rejected the idea, because you just need to build an HTTP request to call a web method.