"access denied" access to the CBS

Similar Questions

• Access denied to the CBS.log file

  Hello

  I found the cbs.log file but when I tried to open it I get access denied. Found a similar question in another post, but was unable to find a solution. Running Vista Home Premium SP2 64 bit on a HP Pavillion dv9700 Windows 7 or IE8. Also tried to copy the documents as suggested in another post and ran as administrator on the command line without a bit of luck. Other simple suggestions are appreciated.

  Hello talefeather,

  Thank you for visiting the Microsoft answers community.

  Try this:

  ·          Click on Start Orb > type cmd in the search box

  ·          Right click on cmd in the results above > click on run as administrator

  ·          At the prompt, type notepad c:\windows\logs\cbs\cbs.log press entry
  

  Then follow the step in which Mick provided.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot access the CBS. Error: Access is denied.

  Original title: cannot access the CBS.

  found errors, I can't access the CBS.log file after that sfc/scannow and I tried the commands listed by Microsoft to take ownership of the file but still access denied message. Also I can not get the command that isolates these errors in a text to work file format either - "access denied" message or it takes back me to C:\Windows\System32 > command prompt.

  Hello
   
   
  Try this:
  a. Click Start and type cmd in the search box.
  b. right click on cmd in the above results, and then click Run as administrator.
  c. at the command prompt, type notepad c:\windows\logs\cbs\cbs.log and then press ENTER.
  The article below describes how to analyse the generating log files by the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista. Note: The article is also applicable to Windows 7.
  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I ran cmd on my computer and it says "windows resource protection found corrupt files but was unable to correct. He gave me a newspaper to look at, but access is denied. c:\windows\logs\CBS\CBS.log? /

  I ran cmd on my computer and it says "windows resource protection found corrupt files but was unable to correct. He gave me a newspaper to look at, but access is denied. c:\windows\logs\CBS\CBS.log? /

  Hello

  This should help you.

  You need to run as admin.

  "How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista"

  http://support.Microsoft.com/kb/928228

  And if the problems cannot be fixed, you may need to do a repair upgrade installation.

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• Cannot access the cbs.log newspaper

  Hello

  im running windows 8 on my computer laptop Packard bell, when I installed windows 8 suddenly, I could not access the BIOS, the Member of the staff at Packard bell told me to scan windows to find errors, and when I did I was surprised he found corruption but when he did and he repaired them the BIOS has started working again.
  I was very interested to see what caused the problem so went the cbs.log in the C:/windows/logs/cbs.log and I got the error message access denied.
  Please some on can tell me how to access this file
  Thanks in advance,
  James
  PS: the command I ran for the test was sfc/scannow in cmd

  Hello

  It's too many mistakes to even consider to manage individually.

  Suspect hardware problems.

  Again the question happens BEFORE Windows loads?

  This isn't probably a Windows problem so contact Packard Bell. As OEM Packard
  Bell is responsible for BOTH the material and the proper functioning of Windows.

  =========================

  If there is a lot of mistakes and then run update or even reset (However, you can not fix
  hardware with the software so I wouldn't them to less than the Packard Bell Support
  told to do because if there is a hardware problem, it may fail, and you may
  not be able to run Windows at all the).

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a repair disc:

  Create a system repair disc
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• VISA: Is denied access to the resource or to the remote machine.

  Hello.

  I use a cRIO-9076 to communicate with a Keithley 2400 via port RS-232 on the cRIO. I have a vi test which is built using the Keithley 2400 drivers and it works perfectly fine with the vi is located under 'My Computer' in my project. If I'm moving that vi on the potion of distance OR cRIO9076 of the project and try to run the vi I get a

  VISA: (Hex 0xBFFF00A8 to the resource or the remote machine access is denied...

  I realized I need to add something to the list of remote access on the cRIO that I find a little confusing. I want to use the serial port on the cRIO by VISA to communicate to the Keithley, so I need to give permission to cRIO on the cRIO? I'm obviously confused.

  I tried to add a simple * (wildcard) to the list of access as a temporary solution but I still get the same error.

  I would like some advice.

  Thank you

  Roth

  cRIO 9076

  Lab View 2013

  Keithley 2400

  NI-VISA 5.4.0

  If you want to move the vi to the CRIO, you can change the name of the resource.

  my example is based on the cRIO-9068. When running at MAX on my local host, it can show as below.

  The resource for the cRIO-9068 should like 'ASRLx:INSTR '.

  

  Good luck!

• Access denied: the IP address of this computer host is not on the list of eligible access of the target.

  Hi all:

  I was working normally with my NI9024 CRIO to my work. I went home and when I came back the other day. I tried to compile my application to work.

  The surprise was that I got a strange message "access denied: the IP address of this computer host is not on the list of eligible access of the target."  Now, I can not connect a CRIO device. I tried to reset all the IP addresses in the CRIO and my PC computer. What can I do?.

  Yes. This is the solution. I had to uninstall the NOR-RIO software on the target. I have uninstall everything on the CRIO. Then I reinstall the software, but I had also to program the fpga, the host and target. And I also have my IP, on the measure and automatition software. I found a big bug I guess.

  Thanks anyway. National Instrument of love. Hope to work there one day.

• FPGA Xilinx compilation failed. Access to the path 'C:\NIFPGA\corecache\activity.log' is denied.

  I just has my cRIO.  I installed all necessary software and drivers and have written a VI mode FPGA.  However, when I try to compile the code, I get the error of follow-up message (see attachment).  I contacted the support NEITHER and they have been unable to solve this problem at the moment.

  The engineer NOR gave me the following advice:

  ' 1. start the registry editor by selecting Start ' Run and then entering the window run regedit.
  2. press the Enter key to open the editor.
  3. find the following registry key in the path below:
  HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\National Instruments\LabVIEW\11.0\AddOns\FPGA\CompilerPath_Xilinx12_4
  * the Wow6432Node is not correct in all cases. on my PC, you go to HKEY_LOCAL_MACHINE\SOFTWARE. National Instruments\LabVIEW\11.0\AddOns\FPGA\CompilerPath_Xilinx12_4
  4. on the data tab, you should see the path associated with your CompilerPath_Xilinx12_4. Please confirm that it is linked to the C:\NIFGPA\programs\Xilinx12_4
  If you Xilinx 11.5 installed, make sure it is also bound to the correct path.
  5. If you have previous versions of LabVIEW installed, you will need to go to these versions as well. For example if you have LabVIEW 2010 is installed, please, go to 10.0\AddOns\FPGA
  Make sure that the CompilerPath_Xilinx12_4 or the CompilerPath_Xilinx11_5 or the CompilerPath_Xilinx10_1 are all properly placed under the drive C as seen above in step 4.
  (6) make sure that the "Working Directory" under LabVIEW 11.0 has the right path of C:\NIFPGA\
  (7) after that, close the registry editor and navigate to where is the worker to compile the FPGA. By default, it should be here: C:\Program Files (x 86) \National Instruments\FPGA\CompileWorker
  (8) here open the document "WorkerRootDirectory.txt" and change the path. Make sure that it is pointing to the C drive.
  (9) save and close the file. Restart your computer.

  It was already correct and still impossible to compile.

  Usually, a "access to the path... denied." error comes from the permissions of the user.

  What operating system do you use?

  You use this tool from an administrator account?

  Is there a security policy on your computer which determines the permissions and user rights?

  Is it possible to run LabVIEW as an administrator?  (e.g. under Windows 7, you right-click on LabVIEW.exe and choose 'Run as administrator'.)

  Best regards

• System.UnauthorizedAccessException: Access to the path '[Namespace.InstallState]' is denied.

  Hello

  We have a Windows Service project that was developed using Visual Studio 2008.  After you build the project successfully, we used the installutil.exe to install the program as a NT service on a Windows Server 2003 R2 server. (Referring to the steps in the article: creating a Windows Service Application). It works very well.

  Now, we are upgrading to a Windows Server 2008 R2 Datacenter server. When I followed the same step to set up the NT service on the new server I got a message: System.UnauthorizedAccessException: access to the path 'C:\inetpub\wwwroot\_uat\WindowsService\bin\Debug\WindowsService.InstallState' is denied. I checked the permissions on the _uat folder are identical to what is on the old server. I have came across this article (kb946503) that describes the similar problem, but on the remote computer to install (I am running the installutil.exe locally on the new server). Anyone know how to fix this?

  Victor Zhang

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Why the system operating to deny access to the file specified to run wipe Drive 5

  Why deny operating system access to the specified file for execution unit 5 Wipe to wipe my hard drive, I need permission.

  Hi JoyceScott,

  ·         What is the operating system installed on the computer?

  If you receive no error message indicating that access is denied, take the permissions on the drive and check if it helps.

  a. right click on the external hard drive, and then select Properties.

  b. click on the Security tab, select the user name and click on modify.

  c. now, click Add and type the user name that you want to grant permissions to sub enter the names of the objects to select, and then click on check names. Click OK.

  d. now, select the user name you typed in group or user names and check full control under the terms of the authorization for.

  e. click on apply and OK. Check whether the problem exists.

  For more information, visit: What are the permissions?

• Cannot run Aerotow, message error "access denied, needs access to the FSX.cfg file in My Documents and Settings folder'.

  Original title: I need assistance with My Documents and Settings folder

  I have Windows XP, Norton Internet security.

  OK, so I have FSX. I'm having a little program called "Aerotow. To run, you must Access the FSX.cfg file in My Documents and Settings folder.
  But access to this file is denied.
  The most funny thing is - I can access the folder without problem. Open it and sail away. But my system seems to have blocked Aerotow.exe and configure.exe to access this folder. It's VERY frustrating. How can I access this folder? Why the program is blocked?
  Thank you.

  Hello

  I suggest you to contact the developer of the application for assistance.

• I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Original title: remove unnecessary files

  I need to remove the uneeded files: Purenetworks and PCFix. But I get: not deletenmrsrc.dll: access denied make sure the disk is not full or write protected and that the file is not in use.

  Ditto for PCFIX.exe.

  How can I remove these and clean unnecessary files? Thank you.

  Hello

  1. how exactly you are trying to remove it?
  2 have you connected the administrator account?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

  Step 2: Take possession of these program at the following location folder, and then check the issue. C:\Program Files\ 

  Reference: How is ownership of a file or a folder in Windows XP

• Owner of the 'ACCESS DENIED' file to the owner

  I'm on Windows XP Home edition 2002, Version 5.1, 32-bit (Service Pack 3)

  I can't access my account "Owner" no matter how I approach him--even from the command prompt.  I keep getting messages like "the owner is not Accessible.  "Access denied", I lost it and thousands of irreplaceable files after screwing up an attempt to "system restore."  (I have not now viable 'system restore' point.)  What I have is a second file "Owner", namely: "Owner.YOUR - W92P4BHLZG".  Apparently there are still files residing on the 'Owner' orginal account, but I can't.

  Here's the kicker: I found the instructions on how to get access to the files ' owner', but I must have a Windows odball version because there is no "Use Simple File Sharing" option in my options 'Advanced Settings' under "Folder Options."  Any help would be appreciated.

  Hi Kilpeder,

  Since you have Windows XP Home Edition, you must start the computer in safe mode and try to take ownership of the file in safe mode. The option disable file sharing Simple is available in Windows XP Professional. To start the computer in safe mode, restart both computers and keep tapping the F8 key. Once you see the option to select Safe mode, select it and press ENTER.

  You can access the link below and follow the steps in the article to take possession of the file or the folder on the computer.

  http://support.Microsoft.com/kb/308421

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Access to the path 'C:\Users\User-2\AppData\Roaming\Hewlett-Packard\HPAdvisor\HPAdvisor.MainFrame.Controls.DockPopup.Main.xml' is denied.

  Someone at - it an idea of this error message: [access to the path 'C:\Users\User-2\AppData\Roaming\Hewlett-Packard\HPAdvisor\HPAdvisor.MainFrame.Controls.DockPopup.Main.xml' is denied.]

  This happens only if I "User Account Control" is enabled in the administrator account.

  Hi GA,.

  Is the default Administrator account or an account that you created?

  Method 1:

  You can try creating another account with admin rights and see if that solves it.

  Create a user account

  If the problem does not occur, then check out the following link and follow the steps to repair the corrupted user profile:

  Difficulty of a corrupted user profile

  Method 2:

  Also, if this problem just started, then try to perform a system restore, and check.

  You can try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

• "The operating system denied access to the specified file"

  I'm playing simcity4 & it keeps saying "operating system denied access to the specified file.

  Hello

  • Exactly when you receive this error message?
  • This occurs during the installation of the game or the game?

  SimCity 4 is not compatible with Windows vista. You can check this link:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/details.aspx?type=software&p=SimCity%204&v=EA&UID=&pf=0&PI=1&s=SIM%20City%204&OS=32-bit

  I suggest you to contact the support of the environmental assessment for better assistance.

  https://help.EA.com/?p_faqid=14357