Access from IPY projects

Similar Questions

• Is there a way to copy properties to disable conditional from one project to another?

  I have a bit of code in a project that I want to back off to a colleague and want to do a new 'reduced' project with only a few subvis.  I don't want to necessarily or need him for the entire project, but only access to a privileged few.  Is there a way to copy the conditional disable properties from one project to another?

  Thank you

  Tech12

  Thanks, it works, but I couldn't get the symbols will appear in the 'project' "Properties..."

  Tech12

• LDAP and APEX for access from home

  I am new to LDAP and only familiar with concepts so bear with me. I would like to know if I can use LDAP with an APEX application so that employees can access the LAN/intranet working system as well from home (or anywhere on the internet). They have access to the intranet via the LAN by signing on the use of their Novell username and password. I'm assuming that they can connect to the House using the same Novell username and password. (BTW-I don't want to set up APEX user ID or database user ID for users of 1800-1900). This can be accomplished? If so, how?
  
  I have a meeting with the vice-principal of the week next to discuss this project which it can manage access from the internet.
  
  
  Thank you in advance.
  
  Robert
  http://apexjscss.blogspot.com

  Hi Robert,.

  Yes, he is indifferent to the APEX where a user comes from. As I mentioned above, authentication is performed in the database by data that shows through the front. As long as the front-end server reaches the end back, your users can connect.
  The onlyl restriction that can be there is the Novell (LDAP) server not accepting does not request to the database server. But if you have LDAP works on your APEX for a LAN/WAN access, he will work with the reverse proxy as well.

  -Udo

• I'm not able to access my Google and Mozilla Gmail account, but be able to access from the internet explore.

  Last 5-6 months, I'm not able to access my Mozilla firefox google account, but access from IE.
  Following error messages appear...

  "We have detected a problem with your cookies settings.
  Enable cookies
  Make sure that your cookies are enabled. To enable cookies, follow these browser-specific instructions.
  Cookies and empty the cache
  If you have cookies enabled but are still having problems, clear the cache and cookies of your browser.
  Adjust your privacy settings
  If your cache and clearing cookies doesn't resolve the issue, try adjusting the privacy settings of your browser. If your settings are up, manually add www.google.com to your list of allowed sites. Learn more. »

   ... Kindly resolve my issue
  

  Kind regards
  Amit

  Another way to check the specific permissions for the site is to use the Page Info dialog box. While on a Google.com page, either:

  • Right click and select View Page Info > permissions
  • ALT + t (open the classic Tools menu) > Page Info > permissions

  In the dialog box that opens, check the permissions to "Set Cookies" and "Maintain offline storage" and adjust as required. (Example screenshot attached.)

• I want to remove access from my computer it does not turn off

  somehow my computer won't come until I close magnifying glass. I want to remove it from my computer

  Hello

  Click on start - go to the ease of Panel - easy access - from the center of control - make the computer easier to see - now uncheck turn on Magnifier - to finish click on apply.

  http://www.Vistax64.com/tutorials/125037-Magnifier-turn-off.html

  also read the tutorial above while turning the magnifying power.

• Of SSL VPN is not able to access from the outside

  Configuration SSL VPN, unable to access from outside, when trying to access the browser site, it says "cannot display the Page.

  Area basic firewall is configured, there must be something that I'm missing, please see the attached config.

  Any help please

  Looks like you will have to allow SSL VPN from the WAN traffic to the free zone (ZP-WAN-to-self), so you need to update the political map (PMAP-JM-WAN) in particular the ACL (ACL-VPN-PROTOCOL), must allow access to port 443 of any source IP address:

  permit tcp any  eq 443

  .. .should do the trick. Cheers, Seb.

• How to import the class from another project in Jdeveloper 11.1.1.7

  I have an application with many projects. I create new project with the application and I want to import a class from another project with demand.

  But I am getting error ( found import.somePackge.someClass). I have red that I need to add it to the path of bulid project but no idea how.

  I use Jdeveloper 11.1.1.7

  Click the project--> project properties, dependencies, click here to change the Righ pencil icon and check the build output

• I want to spend my access from a mac (which I am getting rid of) to my PC - how?

  Hello

  Bought it is not if long - pdf services now to get rid of my mac and you want to access from a PC - how do I do this - doesn't seem like I can download it again.

  Hi deniseg42120976,

  May I know what are the services that you have purchased? Is - this subscription Pack PDF, export to PDF or Acrobat. Pack of PDF and export to PDF are online services that can be used by going to the web regardless of operating system. But if you have Acrobat subscription, you must install it on the PC from here: download Acrobat DC (DC) | Company or VIP

  Thank you

  Abhishek

• Drag the sequence from the project Panel to other sequences DO NOT insert all clips containing

  Hi all

  I have no ' t know when this behavior changed, but when I dragg one sequence from the project Panel to another sequence, it will not place this sequence as a whole (as it used to be), but as you have selected all the clips containing. Its a good thing, but can someone tell me how to do the old way? I tried to keep alt-shift-etc... Did not work.

  Try the left button from the top on the table of the sequence. He alternates between the entire sequence in medallion, as before, or as individual items.

• How copy sequences from another project and NOT end up with entries double for source clips?

  If, like me, allowing you to work in Final Cut Pro, you know a major difference in first Pro workflow is that the two projects cannot be opened at the same time. Also, the referenced clips must be part of the project first. Firstly, it forces me to be more organized with projects/clips and avoids the situation of source clips "unregistered". On the other hand, I'm running in a challenge around copy/reuse of sequences from another project.

  We have a large group of images that is used for two different purposes. In order to keep things clear, I created two project files that contain the same elements of sources and the different sequences. (I cloned the project after importing all the clips in the source and work then from there.) Now, I need to "copy" some footage from the project A to project B, so that I can reuse the edition work on these sequences without having to replicate them on the. In FCP, I would have just two projects open and copy - paste the sequences of project A to project B. In Premiere Pro, I was happy to see that copy - paste can work through projects - i.e., I can 'copy' in the project, close the project A open project B, then "Paste". HOWEVER, bringing to all of the source clips referenced by these sequences in the project has... Even if the source clips are already in project B.

  OK, I understand why this happens, because Premiere Pro does not know (or check) the same clips already exist in project B. But I don't want to keep the two entries of the source clips in the project (in different bins too), because that becomes a source of confusion on the road. Is it possible for me to separate the news sequences of these 'new' entries in source clip and connect them with the existing entries? If I just go and delete the entries of 'new' source clip, references in these sequences don't simply go offline, they are deleted. If new sequences are empty.

  I fight to see what is the best approach in this case. Any suggestions or tips?

  I do this very similar workflow. I'll have the project 'A' where I change my sequences, etc., and then down the road, if I want to use some of these project grna 'A' in a new project 'B '.

  PP can do what you are looking for and do not create the duplicate of source even footage items.

  Do not copy and paste. Use rather import to import the discovery of the other project.

  Open your project that you want to reuse sequences. Then go to file > import and place you on the project that you want to import sequences of. Click the project file, and PP will ask you which you want to import sequences. Select the sequences (or the entire project) and PP will import the footage for you.

  Now... the media in double...

  If you clip source "00001.MTS' for example, already in the project you have open and one of the sequences that you import reference also the clip of"00001.MTS"from source, PP will not import a duplicate because it will use the clip that you have already imported.

  However, if PP is to import a copy it's probably because in each project, you have different I/O points set for the same element in source. If this is the case of the PP will import the copy of the clip so it retains every version of the video I/O points.

  If you make a test import and make sure that there is no point of I/O, or they are the same I/O points, PP will import the clip of dup.

• Is there anyway to copy a selection of slides from one project to another and keep the link?

  Hi all

  I created a project of type "model", with a selection of slides all styles containing lessons. Some of these lessons are configured in such a way that they use multiple slides, linked together in a way (or ways). The link is present with selectable objects on each slide (for example by clicking on this object will jump the user to slide 5)

  Basically, the link is important for the implementation. But when I take these slides from the project template and create a new project with them, the link everything disappears and by default to "go to the next slide", so clamping to the top of the installation of the lesson.

  I tried to create the model as a way to save time of design with the future creation, because these will be used over and over again. I could manually link to the top of each slide again every time that I put them in a new project, but before accepting I thought good to ask someone if they know how to copy a sequence of slides and make them keep their link?

  Thanks in advance,

  Rich.

  If indeed there is no work around?

  Too bad there isn't an import in Captivate product dedicated to capture projects.

  The only thing I can think of is to work on top of the 'model' project, keep the necessary slides for the lesson, I am owrking, delete the rest, then rename/save as something new.

• Import an Access from Oracle database

  Hello
  
  I would like to know if there is a way to import an Access from Oracle database
  
  
  Thanks forward

  The easy and simple way to do this is using Sql Developer

  Please see the link is a guide step by step to achieve what you want

  http://www.Oracle.com/technology/tech/Migration/Workbench/Viewlets/accessconnlauncher.html

  http://www.Oracle.com/technology/tech/Migration/Workbench/Viewlets/msaccesslauncher.html

  Concerning

• Copy photos from one project (book) to another

  I have created a project (book), but I'd like to see what it looks like with a different format.  So, I chose a new project but can't seem to find a way to copy the photos from the first to the second.  I can select all the photos in the first draft (placed Photos), but can't seem to find a way to copy in the second project.  Alternatively, the second project (book), I can choose "Add Photos" but he takes me to the main page of the Photo and can not find a way to have access to the first book.  No idea how to copy all the Photos of the Place of book 1 book 2?

  Two ways

  single - double employment with the book (select it and press command - d) and then change the theme of the copy

  or show the side bar (View menu--> see sidebar), create a new book, select the old book and all select and drag to the new book thr project

  LN

• Cannot install bios access from win 8

  HP Touchsmart tm2 laptop and although age has officially supported, was able to install Windows 8.0 but now cannot move to 8.1 Windows because I can't boot from the CD/DVD or USB flash drive.

  The store Windows says that my 8.0 cannot be updated to 8.1 via the shop, so I want to do a fressh 8.1 installation and have purchased the software and the key.  But I can't get the laptoip to boot on the USB CD/DVD or a USB flash drive (or even a floppy disk)

  Since the installation of 8.0, when the computer starts, a HP logo appears, but there is no option to enter the BIOS setup or to specify the boot sequence.   I have no reason to believe that I changed the boot sequence, so there should resemble any of these external devices first, but this is not (there's a brief access to the CD/DCD, but it goes to start with the hard drive).

  It seems that Win 8.0 installation has done something in the BIOS.  Have tired etc. ESC, F2, F10, Del, F6 during the boot process, even if the messages do not appear.   Maybe I could reflash the BIOS?  Or is it an executable I could run wtining Win 8.0 to access the BIOS, otherwise I'm stuck.

  Anyone with a similar problem/solution?

  Thank you

  Was able to get. Window very tight to get into the boot on this computer compared to other menu that I worked.  Configuration via USB seems continues normally.

  I already installed Win 8.1 on a HP TouchSmart300 desktop model and found that the microphone does not (confirmed elsewhere in this forum).  Using a wirelss headset Plantroincs has proved a good solution.  Anticipating I could met the same problem on the laptop.  Now soon.

  Thanks again.

• TestStand 2014 freezes when I select a path from the project during an Action LabVIEW using LabVIEW TERM 2014

  In the company that I work, we have a solution that uses the two TestStand 2014 and 2014 LabVIEW.

  We work with the development version of the two, but we are deploying our automation using TestStand and Labview Runtime engine 2014.

  We tried to deploy a new station, but during the analysis of our project, the User Interface for Teststand (version Deploy) froze.

  I tried several things and decided to install a full version of TestStand 2014 and 2014 LabVIEW to try to debug the problem.

  What I've discovered is that when I create a new sequence in TestStand, add a VI Action and try to load the path to the project, the TestStand freezes if I use the adapter Runtime.

  If I go to the LabVIEW development system adapter in TestStand, it works. However, I need to use the Runtime since it's free while the LabVIEW Development is paid.

  We already use our solution in other places, and this is the first time, it never happened. The only post I found online that had something to do with this issue is this.

  If I remove the path of the project and call the VI himself, as "dvu", said in his second post, it works.

  However, it is something not good to do in our automation together, since we have several calls from LabVIEW.

  Any ideas on how to do this only works with 2014 DURATION and 2014 Runtime LabVIEW TestStand?

  Thank you!

  Thanks a lot Stop_Luke_and_Listen, but the guy where the deployment was made called the support NEITHER and they couldn't find the problem, so they formatted the PC.

  Now it works very well, so I won't be able to generate the report. It would have been a great idea.

  Thank you!

  SOLUTION: Format the PC and reinstall.