Is there anyway to copy a selection of slides from one project to another and keep the link?

Similar Questions

• Is there a way to copy properties to disable conditional from one project to another?

  I have a bit of code in a project that I want to back off to a colleague and want to do a new 'reduced' project with only a few subvis.  I don't want to necessarily or need him for the entire project, but only access to a privileged few.  Is there a way to copy the conditional disable properties from one project to another?

  Thank you

  Tech12

  Thanks, it works, but I couldn't get the symbols will appear in the 'project' "Properties..."

  Tech12

• Copy slides from one project to another (2 different resolutions)

  Hello

  I have 2 projects of different resolutions (long story) and I want to copy the slides in the smaller project in the cotyledon. But keep the same resolution. (I want to create the Visual of a computer monitor showing the demonstration, as that is the lower resolution to I can have PC monitor as a backdrop)

  When I copy the slides, they are by default resize themselves for the biggest project and I can't change them.

  is there advice?

  is there a 'special' block when it comes to slides?

  Small projects are demonstrations having someone else did for me (so I can't really re - record)

  I want to just try to make them look a little more visually pleasing

  Thank you kindly for your time

  The solution is to:

  • Take a copy of your smaller project and work on that, not the original (in case of screwups).
  • Resize the smallest project using modify > resize the project options.
  • Be sure to work carefully how to increase the size of the stage WITHOUT changing the size of the existing content.  Basically, you want to add an extra space around your current content so that it is now sitting in the middle of the scene.
  • Once you have managed to get your content to the same size as the largest project, copy and paste slides on.
  • You may be able to develop a nice graph of a monitor with a hole in it.  Place it on the slide (or slides model) so that it lies on top of your smaller other screenshots to give effect to look at the screen.

  Is that what you're looking for?

• Can I copy a schema of metadata from one model to another model in the environmental impact assessment?

  Hi all
  
  I have 2 OLAP models in my IST Essbase Integration Services. In the first OLAP model, there is already a sketch of meta.
  I want to copy this sketch to the 2nd OLAP model. Can I do it? If Yes, then how?
  Please advise.
  Thanks in advance.

  Never done that. But by changing the metaoutline .xml file (to point to the new OLAP model) & import in HIA should work

• Page of the copy from one application to another application in the same workspace

  Is it possible to copy a page from one application to another application in the same workspace?

  If so could you tell me how its done?

  Thanking you in advance.

  go to any page in your target application and click on 'Create' > 'new page as a copy '. The rest of the process is driven by the magician.

  Denes Kubicek

  -------------------------------------------------------------------

  http://deneskubicek.blogspot.com/

  http://www.Apress.com/9781430235125

  https://Apex.Oracle.com/pls/Apex/f?p=31517:1

  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494

  -------------------------------------------------------------------

• Rotoscoping mask copy from one project to another

  Hello:

  I did some rotoscoping and put in several hours animating the mask only to realize that I'm not in the project, which is intended to Rotoscoping. Is it possible to copy a layer mask animation of one project to another?

  Save the project with the new name.  Open the correct project and import the project roto.  Copy the layer for the correct model and reduce the project down.  Save as a new name.

• Can I copy and paste from one project to another?

  I have a scrolling title works very well in a single project and wanted to "simply" copy and paste into another project.  After the copy on the project 1, when I come to 2 project to make the dough, there are nothing to paste.  Is it something with Premiere elements 12, or with my iMac for not keeping that I copied into the memory buffer appropriate?  I found something online which implies there was a software to do this, but I can't believe that this is the only solution.

  I also created a "temporary project" for easier editing with images, transitions and added I want to put into my project "master."  I could create an avi and bring it back on, but I was hoping to get the project finished in a single source.  Any thoughts would be appreciated. Merci.

  Rick

  Rick

  The merger of two projects into one is not relevant and overlooks the important of Premiere Elements concepts if all you want to do is to use a title of a project in another.

  There is a simple and effective way to do it. Essentially, you create your title in the Titler to project 1 and then 'save' as a CTR file which can be imported into another project of Premiere Elements through the Add Media/files and folders.

  1. in the project 1, create your title in the Titler. Close to there.

  2. always in 1 project, go to the active project and it highlight / select the thumbnail for the title.

  3. can I go to Menu/export/name of the file and export/save your title as a file .prtl.

  4. If necessary, import the .prtl file project 2... Add media/files and folders/projects active where drag you it to its destination of chronology.

  Conventional techniques to transfer the contents of one Premiere Elements project to another will not apply to your situation somehow.

  Please see the newsletter and let us know how the above worked for you.

  Remember, you don't want to highlight the title in the timeline to get an active file Menu/Export/Title...needs to be the highlight / select the

  title in the active project, then Menu/export/name of the file.

  RTA

• Copy data from one schema to another. Reopen the Question

  Hello
  
  I had asked this question earlier to copy data from tables of one schema to another in the same database using the database link. In my previous post have mentioned below.
  

  Re: copy data from one schema to another.

  Now I am faced with the question for the remote copy of database
  
  I have created a DB connection between my local system and the remote database. with the chain of connection as shown below
  

  CREATE THE DATABASE PUBLIC LINK "MERU_DEV_LOCAL_DEV".
  CONNECT TO MERUDEV IDENTIFIED BY MERUDEV WITH THE HELP OF "MERUPROD";

  In the above script
  

  LOCAL DEVELOPMENT scheme IS
  REMOTE schema is MERUDEV

  I try to copy remote database to my local database tables using the script below.
  

  network_link DEVELOPMENT impdp = schema MERU_DEV_LOCAL_DEV = MERUDEV remap_schema = MERUDEV:DEVELOPMENT TABLE_EXISTS_ACTION = REPLACE

  But the copy of the table does not occur. What could be the problem? Please suggest me or do I need to modify the script
  
  Thank you
  Sudhir

  You can:
  -monitor the BONE with ps - ef
  -monitor data pump: jobs are dba_datapump_jobs and dba_datapump_sessions
  -monitor with logops: v$ session_longops

• Tip action copy/paste from one project to another

  Hi all

  Is it possible to copy the script to a tip of a first draft action and stick it in another project?

  Thank you

  The answer is, sorry, no. It is related to the required unique ID for every object referenced or used in advanced actions. Please enter a feature request in support of my pleading to have the ability to export/import shares advanced, to add a comment for them and to be able to print them. Only when the sufficient number of users will support these applications, they will be taken into account, at least I hope.

  There is a possible solution, which I explained by an example in a blog: Advanced acttions can be transferred by transforming the source into a model project and create the second project target based on this model. Save an existing project as a model is not possible once again (another of my feature requests), but simply to replace the extension by CPTL CPTX will do the trick.

  Here's the blog I'm talking about:

  Model for reuse the script

  Lilybiri

• Copy layers from one project to another

  I have two projects. One with a purpose complex with several layers. The other with a different effect. I need to copy the first into the second, but the two projects have sizes different model and all layers in the first are defined on this size. I tried to change sizes, but they are in percentages, so 100% in a project is a completely different size to 100% in the other. What can I do to fix this?

  There is a comp resizer script included in EI. Simply select the model you want to edit, then click file > Scripts > scale Composition.

• BlackBerry smartphones copy all list of Contact from one device to another.

  What is the easiest way to copy the entire list of contacts, a Torch 9800 device in another?

  Thanks in advance for your help.

  Kind regards

  David

  with the use of the Desktop Manager, you can make a selective backup and restore

  Make a backup of your device first, using Desktop Manager > backup. Close at the end Office Manager and disconnect it from BlackBerry. Get DM here http://us.blackberry.com/apps-software/desktop/

  restore from upward. Follow this KB if necessary http://www.blackberry.com/btsc/KB10339

• Copy data from one column to another column in the form of customization

  Hi all

  I need, it's that I need to copy the value of a column to another column.

  But the two columns are different from the TAB

  Who be used, please send me the code.

  Thank you

  And can you describe your condition more clearly?

  My question was... you try to copy the incident followed summary on behalf of the task? In this case, you will need to find the event that triggers ONCE you have entered your resume. Enter in the preview, select display custom events and see what events are triggered. These are the 'moments' that you can use to add additional programming.

• How to copy a layer from one project to another draw in Adobe

  draw Adobe allows this?

  Hi Seffrog,

  No, I'm sorry, he's not. You can duplicate a layer, but there is currently no way to move it to another project or canvas.

  Sue.

• How to transfer or copy a title/text from one project to another element?

  I have a text with sequences of movement custom built into one project, I would like to transfer to another project.  How can I do?

  Hi, once again...

  This works!  In GIMP (sorry, no photoshop, but it would have worked, too!), I created an image of 1920 x 1080 green, pure and put it back plan of my animation, moving text.  Then I exported the animation using my usual AVCHD, high option resolution 1920 x 1080 p MP4 H264 30.

  When I add that as an asset, I put just the effect of saturation on the animation and I'm all set.  I have to adjust my colors a little, as the Chroma find little green in my text - but I can do without any problem.

  We are all together!  Thank you, AT - problem!  The solution was not in export, but how to communicate the transparency of the project has project B.

  Thanks for your help!  You got me on the right track...

  -Tom

• BSOD after copying the large number of files from one disk to another

  Hello. I hope you can help because this issue is very frustrating. Just built a new PC:
  -Gigabyte Z97X Gaming 7 mobo
  -8 GB Corsair vengeance 1866 mhz
  -EVGA GTX 770 video
  -CPU Intel 4770K
  -two hard drives of 1 TB WD black in RAID 1
  -one ADATA 256 Gb SSD as drive OS
  -a 1 TB drive Toshiba
  -Windows 7 64-bit professional
  -F3 Bios Rev

  System can work very well for everyday, but when I copy large number of files from one disk to another (i.e. 70 000 files, 80 GB), shortly after (10 to 30 minutes), I get a BSOD bugcheck.

  I ran MEMTEST86 for hours without error. I can run PRIME95 with max heat without error. And as I said, it seems to be fine until I do a copy of large files. It seems not to matter to this disc, I copy to/from. Start WIndows, I see no activity CHKDISK. Ideas?

  Log name: System
  Source: Microsoft-Windows-WER-SystemErrorReporting
  Date: 25/06/2014 19:55:50
  Event ID: 1001
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Daddys-PC
  Description:
  The computer was restarted after a bugcheck.  The bugcheck was: 00000124 0 x (0 x 0000000000000000, 0xfffffa8008788028, 0x00000000bf800000, 0 x 0000000000200401). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 062514-6692-01.
  The event XML:
  
   
     
      1001
      0
      2
      0
      0
      0 x 80000000000000
     
      32358
     
     
      System
      Daddys-PC
     
   
   
      0 x 00000124 (0 x 0000000000000000, 0xfffffa8008788028, 0x00000000bf800000, 0 x 0000000000200401)
      C:\Windows\MEMORY. DMP
      062514-6692-01
   
  

  No problem, thank you!

  All attached files of the DMP are the verification of bug WHEA_UNCORRECTABLE_ERROR (124) .

  A fatal hardware error occurred. This fatal error data error Architecture WHEA (Windows Hardware).

  If we run one! errrec on the 2nd parameter of the bug check (address of the WER structure), we get the following:

  ===============================================================================
  Section 2: x 86 / x 64 MCA
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa8008788138
  Article @ fffffa80087882c0
  Shift: 664
  Length: 264
  Flags: 0x00000000
  Gravity: Fatal

  Error: Internal unclassified (Proc 4 row 1)
  Status: 0xbf80000000200401
  Address: 0x00000000fee00040
  Misc.       : 0 x 0000000000000086

  Internal unclassified error, this implies that it is not publicly documented and there is no way to identify the error.

  -----------------------------------------

  1. AppleCharger.sys is listed and charged, which is the driver GIGABYTE on / off Charge. See here for more information - http://www.gigabyte.us/MicroSite/185/on-off-charge.htm

  Very annoying software, so please uninstall ASAP!

  2 remove and replace Norton with Microsoft Security Essentials for purposes of troubleshooting temporary, as it can be at the origin of the conflict:

  Removal of Norton- https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us;JSESSIONID=841A6D40BA6872C47697C6C6B19C8E11.4?entsrc=redirect_pubweb&PVID=f-home

  -MSE http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  3 uninstall Gigabyte Saver Easy, Easy Tune, as well as all the another bloatware Gigabyte, it is very problematic.

  4.

  2: kd > lmvm marvinbus64
  start end module name
  fffff880' 04c 51000 fffff880'04 c 95000 MarvinBus64 (postponed)
  Image path: \SystemRoot\system32\DRIVERS\MarvinBus64.sys
  Image name: MarvinBus64.sys
  Timestamp: Fri Sep 23 17:17:03 2005

  Pinnacle Studio Marvin Bus driver, dated 2005. Too old to work with the operating system, so please delete the software + the device (if any).

  5 please remove your Rainbow Tech/SafeNet USB security device if there is no update for its software, device drivers are too old.

  -----------------------------------------

  If all else fails, there's only so much you can do with an error like this, checking until it boils down to a faulty processor that needs to be replaced. Start from 1 and work down:

  1. make sure your temperatures are the norm and nothing is overheating. You can use a program such as Speccy if you want to monitor the time - http://www.piriform.com/speccy

  2 clear your CMOS (or optimized load BIOS default) to ensure that there is no parameter incorrect BIOS - http://pcsupport.about.com/od/fixtheproblem/tp/clearcmos.htm

  3. make sure that your BIOS is up to date.

  4 if all else fails, the only one left to do is replace your CPU because it is defective.

  Kind regards

  Patrick