Access Oracle and Oracle identity Federation Manager

Similar Questions

• Oracle Identity Federation - OID RCU failed to create schema

  Hello
  I try to install OIF - Oracle Identity federation according to the OBE http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/oif/11g/r1/oif_install/oif_install.htm
  
  1. I installed the Oracle 11 g 2 11.2.0.3 with the charset = AL32UTF8 and db_block needed a staff of 8 K and nls_length_semantics = character creation database and listener.
  2 install weblogic 10.3.6
  3. start installation of IOM - Oracle, chosen identity management install and configure the option and the schema creation options.
  4 installation goes fine, but when setting up, he fails. Here's the relevant part of the log.
  
  I tried several times just to fail again. If someone would want us to enlighten as what goes wrong here. Let me know if you need more information about the configuration...
  
  
  
  
  File: ...//oraInventory/logs/install2013-05-3018-01-31 AM .out_
  
  
  ORA-01450: length maximum key (6398) exceeded
  
  Completion percentage: 62
  Repository creation utility: create - completion summary
  Information on the database:
  Host name: vccg - rh1.earth.com
  Port: 1521
  Service name: OIAMDB
  Logged in as: sys
  Prefix for schema owners (non prefixable): DEFAULT_PREFIX
  RCU Logfile: /data/OIAM/installed_apps/fmw/Oracle_IDM1_IDP33/rcu/log/rcu.log
  RCU Checkpoint object: / data/OIAM/installed_apps/fmw/Oracle_IDM1_IDP33/rcu/log/RCUCheckpointObj
  Of component schemas that you created:
  Status Logfile element
  Oracle Internet directory is not /data/OIAM/installed_apps/fmw/Oracle_IDM1_IDP33/rcu/log/oid.log
  
  Repository creation utility - create: finished
  Repository - Dropping and cleaning of the defective components creation utility
  Fall of repository and cleaning of defective components.
  Completion percentage: 93
  Percentage of completion:-117
  Completion percentage: 100
  -RCUUtil createOIDRepository status = 2 - java.lang.Exception: the RCU failed to create schema OID
  at oracle.as.idm.install.config.IdMDirectoryServicesManager.doExecute(IdMDirectoryServicesManager.java:792)
  at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
  at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
  at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
  at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
  at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
  at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
  at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
  at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
  at java.lang.Thread.run(Thread.java:662)
  
  ____________________________________________________________________________________________________________________________________________________
  
  
  
  
  
  File: ...///fmw/Oracle IDM1_IDP33/RCU/log/OID.log_
  
  
  CREATE UNIQUE INDEX rp_dn on ct_dn (parentdn, rdn)
  *
  ERROR on line 1:
  ORA-01450: length maximum key (6398) exceeded
  
  Published by: 1008964 on May 30, 2013 12:10
  
  Published by: 1008964 on May 30, 2013 12:12

  Change NLS_LENGTH_SEMANTICS = BYTE. and try again.

• URL to download Oracle Identity and Access Management Suite 11 g R2 PS2

  
  Try to download Oracle Identity and Access Management suite over 11gR2PS2 (11.1.2.2.0). While attending throguh Oracle download link,

  • Identity Management 11gR2PS3 (11.1.2.3.0) can be downloaded from the link below.
    • Identity & Access Management 11 GR 2 downloads
  • Same link shows to download Identity Management 11g(11.1.2.2.0) R2PS2 at the bottom of the location
    • https://eDelivery.Oracle.com/
    • While going through the link above and search for identity and access management suit more, it allows to download Identity Management 11g(11.1.2.1.0) R2PS1 and Identity Management 11gR1 (11.1.1.1.0) but no identity and Access Management Suite over 11gR2PS2 (11.1.2.2.0).

  If someone can provide a direct link to download identity and Access Management Suite over 11gR2PS2 (11.1.2.2.0).

  Thanks in advance.

  11.8 GB contains DB, UCR, Weblogic, SOA, patches required for SOA (!) and IAM. Everything you need in one place.

  3.3 GB contains just IAM.

• OAM 10.1.4.3 at 11 GR 1 material Oracle Identity and Access Management

  Hello
  We would like to switch to Oracle Identity and Access Management 11 GR 1 material with a new installation, but just a few questions:
  
  -Docs say you need to install the following SOA, if you want to use Identity Manager in 11 GR 1 material. We use such things as management password lost, which I know we have configured parties through the piece of Identity Manager. So I guess that we need this?
  
  -Do you need to use Weblogic 10.3.5 to Oracle Identity and Access Management 11 GR 1 11.1.1.5 material, or can you 10.3.6? I have that only he saw certified with 10.3.5.
  
  Thanks for the help!

  Yes, it takes Weblogic 10.3.5 to IOM 11.1.1.5.
  11.1.1.5 installation you need to install SOA even if it is not required by use

• Oracle Identity Access Management (11.1.1.3.0) and difference IM?

  What is the difference between Oracle Identity and Access Management (11.1.1.3.0) and identity (11.1.1.3.0) management ?
  
  
  Of
  http://www.Oracle.com/technetwork/middleware/downloads/OID-11g-161194.html

  Yes, you can. Yet once, simply start config.sh.
  -olaf

  PS: Please check the responses accordingly. THX.

• Oracle Identity and Access Management (11.1.1.3.0) documentation

  Friends,
  
  Where can I download the documentation of Oracle Identity and Access Management (11.1.1.3.0)
  
  Thank you

  See this link:

  http://download.Oracle.com/docs/CD/E14571_01/install.1111/e12002/under_install.htm#BABCEAHC

• To start the Oracle Identity Manager how much RAM is required?

  To start an Oracle Identity Manager and access, how much RAM is required? and with what amount of RAM required.
  
  Tell me any how to set JVM has increased.
  
  Using Oracle VM for Identity manager and the use of the RAM of 1300 provided to the virtual machine. Physical PC with 4 GB of RAM.
  
  My setup will be help to crushed the Oracle Identity Manager without fault?

  You must be at least 3.5 GB of RAM for IOM. Including SOA, it's going to be 6 to 8 GB. See the links in the configuration system supported here:
  http://www.Oracle.com/technetwork/middleware/IAS/downloads/fusion-certification-100350.html

  Kind regards
  GP

• A question about the capablities of Oracle Identity manager?

  Hello, everyone,

  Here is our environment,

  1 - we have user accounts in our database for students and employees in our academic Institute.

  2. we have a Microsoft active directory for employees only, that was created many years ago.

  3 - our web applications (weblogic server, ADF, other) use user accounts to database for authentication.

  We plan to create a server active directory for students, we thought about using Oracle identity manager (OIM) to do.

  is it possible to just directly sync & manage student accounts of microsoft oracle database active directory through IOM.

  Thank you.

  Hi mhaljasim ,

  By my understanding, looking for some sort of tool to create users (doing the commissioning) in a target (Active directory). If this is the case, yes IOM will be a great tool for you as it has connector AD that have this capability.

  Trying to help even more: research from the perspective of the solution, my understanding is you will make this workflow:

  (1) created in the Oracle database user. (2) then this user will be reconciled database of IOM, IOM DB connector (in other words, the user will be created in the table user IOM). (3) then IOM will be a process of supply to create this type of user in AD, using the connector of the IOM.

  But I would put another suggestion here:

  If you are looking for just a matter of authentication using the users of the database as well as users of the AD. I want to suggest to look deeper into the OVD (Oracle virtual directory) tool. It is a great tool that allows you to have views of the two targest(AD +DB) at the same time and make a simple Ldap authentication against this specific point of view once. By my understanding, this can be a good option in your solution as well. Please check more on these two IDM products to:

  http://www.Oracle.com/technetwork/middleware/ID-Mgmt/index-093158.html

  http://www.Oracle.com/technetwork/middleware/ID-Mgmt/Overview/index-098451.html

  I hope that this info below helps you a lot,

  Leoncio Thiago.

  http://thiagoleoncio.blogspot.com/

• Error fix Oracle Identity Manager 11 GR 2 PS1 BP01 bundle

  Hi all

  I get the following error when applying BP01 for PS1 OIM11gr2 in section 4.3.1 patch servers Oracle Identity Manager of Managed on WebLogic Server.

  patch_automation:
  [entry] jump entered as property IOM. DBPassword has already been set.
  entry entry jump as mdsDB.password property has already been set.

  wls_property:
  entry entry jump as weblogic_password property has already been set.
  entry entry jump as oim_password property has already been set.

  Run patched sql files:

  BUILD FAILED
  C:\Oracle\Middleware\Oracle_IDM1\server\setup\deploy-files\automation.XML:188: The following error occurred during the execution of this line:
  C:\Oracle\Middleware\Oracle_IDM1\server\setup\deploy-files\automation.XML:121: Class not found: oracle.jdbc.OracleDriver JDBC driver could not be loaded

  Total time: 0 seconds

  I join my file patch_oim_was.profile.

  # For the passwords if you don't want the password < / optional > in this file just comment out him from here, you will be prompted for him in rumtime.

  Variable #Neccessary of [mandatory] env
  ANT_HOME is C:\Oracle\Middleware\modules\org. Apache.ant_1.7.1
  JAVA_HOME=C:\Java\jdk1.6.0_45
  mw_home = C:\Oracle\Middleware\
  oim_oracle_home = C:\Oracle\Middleware\Oracle_IDM1
  soa_home = C:\Oracle\Middleware\Oracle_SOA1
  WebLogic.Server.dir=C:\Oracle\Middleware\wlserver_10.3

  #weblogic configuration variables
  weblogic_user = weblogic
  #Password is optional, if you want to give on the terminal itself leave what he commented. If not, uncomment it.
  weblogic_password = Weblogic123$
  soa_host = localhost
  soa_port = 8001

  #DB configuration variables
  operationsDB.user = DEV_OIM
  # Password is optional. If you want to give on the terminal itself leave he commented. If not, uncomment it.
  IOM. DBPassword = Sysadm10
  operationsDB.host = localhost
  operationsDB.serviceName = oimdb
  operationsDB.port = 1521

  
  mdsDB.user = DEV_MDS
  #Password is optional, if you want to give on the terminal itself leave what he commented. If not, uncomment it.
  mdsDB.password = Sysadm10
  mdsDB.host = localhost
  mdsDB.port = 1521
  mdsDB.serviceName = oimdb

  oim_username = xelsysadm
  #Password is optional, you can put it here too (and also uncomment the line) oth otherwise leave it as it is and you will get invited to do during execution AsString hidd en
  oim_password = Weblogic123$
  t3 = oim_serverurl: / / localhost:14000

  Thank you

  
  

  I have it... Document Oracle error. Use "/" instead of "------" in windows 7.

  Variable #Neccessary of [mandatory] env

  ANT_HOME = C: / Oracle, middleware, modules, org. Apache.ant_1.7.1

  JAVA_HOME=C:/Java/JDK1.6.0_45

  mw_home = C: / Oracle/Middleware

  oim_oracle_home = C: / Oracle/Middleware/Oracle_IDM1

  soa_home = C: / Oracle/Middleware/Oracle_SOA1

  WebLogic.Server.dir=C:/Oracle/middleware/wlserver_10.3

• Information data model | Oracle Identity Manager

  Hi all
  
  I'm new to "Oracle Identity Manager" and need some data model information. IOM will be our source to generate a report on Oracle BI publisher. I'm trying to understand the tables involved in the IOM and its level (i.e. column information What data it stored), relationship between the tables.
  
  I tried searching in the documents of the Oracle, but do not have the right information.
  
  Does anyone know on any portal or blog or book oracle reference document, which provide me with this information?
  
  Appreciate if share you it.

  See the Metalink Article: 1164914.1

  -Marie

• Error in Configuration Oracle Identity Manager

  I used for the Installation of versions:
  
  Version of the software
  11.2.0 Oracle database
  11.1.1.5.0 repository creation utility
  10.3.6 Web logic
  SOA Suite 11.1.1.6.0
  Fusion Middle ware Installer 11.1.1.5.0
  1.6.0_29 JDK Oracle JRockit JDK or Sun JDK Web-logic
  
  Error: Failed to Config Action Oracle Identity Manager Configuration
  
  Waring exception occurs in the web logic Server:
  
  < 14 August 2012 11:57:53 AM GMT + 05:30 > < opinion > < WebLogicServer > < BEA-000360 > < Ser
  worm started operation >
  < 14 August 2012 12:03:49 PM GMT + 05:30 > < WARNING > < management > < BEA-141239 > < the No.
  n-dynamic attribute AuthenticationProviders on weblogic.management.security.Real
  mMBeanImpl@581c390c([OIDM]/SecurityConfiguration[OIDM]/Realms[myrealm]) has been
  has changed. He will have to redeploy or configured restarts entities >
  < 14 August 2012 12:03:49 PM GMT + 05:30 > < WARNING > < management > < BEA-141238 > < a non -.
  dynamic change has been made which affects the AdminServer server. This server m
  UST be restarted in order to consume this change. >
  < 14 August 2012 12:03:49 PM GMT + 05:30 > < WARNING > < management > < BEA-141239 > < the No.
  n-dynamic attribute ControlFlag on weblogic.security.providers.authentication.De
  faultAuthenticatorMBeanImpl@80d076be ([OIDM] / [OIDM] SecurityConfiguration / kingdoms [m)
  (yrealm] /AuthenticationProviders [DefaultAuthenticator]) has been changed. This mastery
  There require redeploying or configured restarts entities >
  < 14 August 2012 12:03:49 PM GMT + 05:30 > < WARNING > < management > < BEA-141238 > < a non -.
  dynamic change has been made which affects the AdminServer server. This server m
  UST be restarted in order to consume this change. >
  
  Please give me a solution to fix the problem

  You can download 11.2.0.2.0 to the last database and through delivery.

  -Kevin

• Oracle identity manager 11g primavera p6 connector

  Please give the download link for oracle identity manager connector for primavera p6

  boyinabox wrote:
  Please give the download link for oracle identity manager connector for primavera p6

  It is included in the P6 tools support and there is no delivery. Hope that you have already solved this request.

  You have correctly configured users IOM to P6 by the p6 connector? I'm trying that. I imported the P6 connector. But problems on commissioning. Hope you could share what you had.

  TIA

  gadba

• From the Cluster of Oracle Identity Manager 9.1.0.2 Application (UX)

  Hello friends,
  I have a question on how to start the Oracle Identity Manager 9.1.0.2 application that is deployed on Oracle WebLogic Server (OWS) 11g on 2 nodes (OIM_SERVER_01 and OIM_SERVER_02).
  What is the procedure to start the administration server, then the nodes where the application is deployed Oracle Identity Manager 9.1.0.2
  I left wondering orders:
  1 xlStartServer.sh
  2 xlStartWLS.sh
  3 xlStartManagedServer.sh
  4 startNodeManager.sh
  
  Thanks for the support...

  Hello

  If the node Manager is configured,

  1. start administration server
  2. Start Node manager
  3. run the two managed server admin server UI.

  Kind regards
  Raghav.

• Block users in Oracle Identity Manager 9.1.0.2

  Hello
  I have a status (locked user) query of the user in Oracle Identity Manager 9.1.0.2.
  The possibility for users to block, seen in the Oracle Identity Manager web administration console appears in the disabled state. As I can enable this feature in Oracle Identity Manager 9. ?
  
  Thanks for the support

  Have not exactly your question.

  Whenever someone tries to login with password wrong, then he gets locked in the IOM. You will need to go to the administration Console and unlock it. You can also do this in DB as well.

  To lock the user to the administration console, you must create a custom button and extend the class action to block this user in IOM.

  Workaround

  Create a UDF called LOCK.
  Create a trigger on this UDF, i.e. whenever changes of true LOCK, then lock the user using query DB or API (UPDATEUSER - user Users.Lock)

• I have a question about the functionality of Oracle Identity Manager...?

  Hi friends
  I have a question about the features of Oracle Identity Manager.
  Here's my question:
  Self-management is possible network passwords (reset / unlock) with Oracle Identity Manager 9.1.0.2
  
  Very grateful.

  What Kevin suggested this means that you are managing accounts and their password by IOM. If your condition is the same then follow:

  Re: error during password reset using the self-service portal