Equium P300-16 t start not at all

Similar Questions

• Satellite P300 - 13 M start not at all

  Hello everyone,

  My Satellite P300 - 13 M with the number of product PSPC4E start not at all!

  When I put my screen down, it automatically goes in hibernation. But the last time I did it was just too apparently... I ejected my battery and the adapter to see if it would start. Negative results. I handed over the battery and ejected from the adapter. Negative results. I connected the battery and the adapter. Negative, no results at all.

  This means the end of my laptop?

  Please help me as fast as you guys can't because it's my only laptop work.

  Thank you very much

  PS If you want specs, then I can't give you their. I don't know the specs by heart.

  > This means the end of my laptop?

  No doubt :(

  But try this: remove the battery and ac adapter
  Leave the laptop disconnected for a longer period of time (a few hours)
  Then press the power button / stop along 30 sec.
  Then connect the battery and the AC adapter and try to turn on the unit.

• Equium P300-16 t has not started up - now asking for Bios password

  Hi everyone, I hope someone can help.

  I have an Equium P300-16 t.
  First it wouldn't start, just the media & power led lights.

  Found that the upper ram module no longer works.
  With only of ram in the computer laptop lower slot will start. Test different combinations of modules, but unit will not start with the lower module filled.

  At least it starts I thought, but now after the toshiba screen, I now get a screen asking me a bios password.
  Research on the web, I see that it is a random problem.
  The unit is out of warranty.

  Any suggestions please

  Thank you
  FIA

  Hi mate

  Unfortunately, it seems that the laptop calling you the BIOS password (don't know why) who is not known to you
  In this case, you should ask a technician using ASP.
  The guy was able to remove unknown BIOS password by using a special procedure.

  As far as I know it of not possible to remove unknown BIOS password without help from ASP.

  Good luck

• Equium P300 - control buttons do not work currently running Win XP

  Hi, I'm looking for help with a problem with a laptop Equium P300.

  This is my brother's laptop, he bought about 18 months ago, it came with Vista, he did not want what he preferred to have XP, so I changed the XP operating system by using the drivers available on the Toshiba Web site, update the appropriate drivers.

  This has worked well for the last 18 months, however, recently, when the laptop is off, touch-sensitive shortcut keys remain lit, even when disconnected from the power supply and do not work.
  Previously, if it has been disabled and you press one of the keys shortcut the laptop turns on but is no longer doing this.

  I wonder if anyone has had this experience before?
  Anyone have any suggestions on how to fix this or even what the cause of the problem?

  Thanks in advance for any help you can offer

  Keith

  Hello

  You use Win XP on this laptop, then you must update the BIOS because there is a special BIOS for Win XP!
  In addition, the Toshiba multimedia control buttons are controlled by tool controls of Toshiba. You can download it from the page of the Toshiba driver.

  Regarding the buttons of enlightenment;
  AFAIK you can enabled and disable in the BIOS itself!
  Check the BIOS settings,

  Welcome them

• Equium P300-16 t does not start

  Hi guys,.

  I have a 2 years old P300-16 t.
  I spent yesterday morning, and he did not begin loading windows. The Toshiba logo came, and then white screen, but I can see that the LCD is on.

  After a few minutes, the fan is fixed, but nothing else happens. I tried to boot from the recovery CD, DVD, DVD of windows, start, but nothing happened.

  I can access BIOS without any problems, I have reset the settings, changed the order of precedence of boot, changed by pressing F12, but nothing helps, it stock after the Startup logo.

  But once I removed the HARD drive and started the machine without it, surprisingly, he began to start installing windows loaded from the DVD to the part of the HARD drive, then it stopped for obvious reasons.

  Then I checked the HARD drive and it "works very well, I ran a few tests on this subject, I can access it from other laptops, and it seems OK, no strange noise, none of the defective areas, nothing..." And again, if the HARD drive was not working, why can not boot from the DVD?

  So, it seems that the laptop won't boot at all if the hard drive is connected. I hope it's just a small matter that can be resolved easily.

  Any ideas would be very appreciated,

  Thanks in advance,
  Adam

  Hi Adam

  HARD drive is recognized correctly in the BIOS?
  Can you get somewhere second HDD and try it again?
  I mean if the same will happen again maybe is disk controller HARD head of this strange issue.

• 13D-3000 spectrum: spectrum 13D-3000 HP start not at all

  Hello.  I have a laptop of 13 t-3000 HP spectrum.  It is about 2.5 years, in very good condition.  I plugged it in charge to the top of a few nights there, but in the morning it would not start at all.  The only thing that happens is that the power light and the Wifi (F12 key) periodically flash light, every 5 seconds.  The screen does not turn on and is completely black, I don't hear any fan and no other activity of any kind.

  I would like any info or suggestions on what may be wrong.

  I tried a number of things from the web searches.  It is:

  -J' I hold power for 30 seconds to do a "hard reset."  This will stop the flashing.  But if I hit the power again, then the power button / stop and button wifi starts flashing again, but no other activity.

  -J' checked that the battery is fully charged.  The light close to the load port turns orange when I plug in the charger, then after a while, it becomes white to indicate that it is fully charged.  I even put a voltmeter on the power supply to verify that he produced 19.5 Volts.

  -J' removed the bottom cover to check for any bad connection or dust.  There is no dust, and the laptop is extremely clean.

  It was taken by storm the night where I plugged it in to charge, and it was directly connected to the wall.

  Suggestions of how to fix it myself, or what it should cost to someone else to fix this would be appreciated.

  Thank you.

  -Danny

  I just followed on this point, because I've seen similar questions, but never a definitive answer.

  After you call HP Tech support, they told me that the power light flashes & key F12 is a symptom of the motherboard

  failure.  The solution is to change the motherboard.

  My computer came with a warranty of 2 years, but the computer was 2.5 years old, so it was out of warranty.

  After some negotiations on the price, HP has decided to fix the problem for $250, including shipping both ways.

  It's less than a week back including delivery on time and I have the laptop back and it seems to work

  Well now.  I have a 90 day warranty on the repair.  In the future, I'll be careful to always use a surge protector

  When it loads up.

  -Danny

• Dell XPS 8500 - start not at all - motherboard problems?

  I have a Dell XPS 8500 I bought in January of 2013 and of course, is now out of warranty. I have not had too many problems with the pc, but last week, I was copying some video files on the SD card in the card on the hard disk drive. My wife told me that supper was ready, so I left the system to finish copying the video files on the HARD drive and ate with my family.

  After we finished eating, I went back in the Office to discover that my computer was turned off. I tried to turn it back on and got no answer to it at all. I held the power button down and still nothing. After unplugging all devices still do not get response. I unplugged the power cord that goes into the food and green on the back of that flickered as I unplugged and plugged in so I thought I had my problem properly diagnosed as a failure of the power supply. I ordered a replacement PSU and installed today but I'm still no response from the computer when you try to start it. I have all the cords of the PSU properly plugged into the HDD and the dvd player and the connector 24 pin to the motherboard as well as the connection of 4 pins so.

  The ONLY answer I get when trying to turn on the computer is that the fan in the power supply and fan to the rear of the case against surges momentarily and return to the stop. They are not even a half of a revolution, and that's all I get.

  Any suggestions would be wonderful! I wonder if it's a motherboard problem and if so, where to find a replacement motherboard. And if not the mobo, what else it could be.

  Thanks in advance for any help you can give me!

  Matt in South Dakota

  pinkorat

  Has worked for me - everything seems to work very well.  Thank you.

  Is there anything else I need to do after clearing the BIOS?

  No, you should be all good...

• Firefox browser start not at all, despite bugs - help!

  I've upgraded to the latest browser. It worked well. then on 4.10.14, I clicked on the icon on the desktop or taskbar and it will not open and no error displayed. I tried all of your corrections - neither works. a box from "create a profile" does not when I try this fix.

  I spent over 3 hours on this problem without success and I was very angry. I would like a set of final, descriptive to this problem as soon as possible solutions.

  Kind regards

  I uninstalled Tor, I uninstalled Firefox, I ran registry & apps CCcleaner cleaner, I restarted my PC, reinstalled Firefox 32.0 - Firefox to the top and work!

  Thank you very much for your patient support.

• Satellite A110 - start not at all!

  My laptop won't boot. Battery does not charge, but the laptop won't start even on plug (with or without battery in place).
  Any ideas?
  Thank you

  Sounds like a motherboard problem

  Have you tried to remove the battery and the AC adapter? Remove the two and wait an hour and then reconnect the battery and the AC adapter.

  If it doesn't work, you need to contact a service provider for help. The technicians can help you control the laptop.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

• Seven Windwos start not at all, even in safe mode.

  I had a problem with my port ethret so I thought I would restore back to before the problem occurred to fix. System Restore is stuck somewhere in the middle and continue woudn't. I gave up after an hour or two and restarted, it. Now he does not even start in safe mode. I get the following error message: Windows could not complete the installation. To install windows on this computer, run the Setup again. Whenever I restart it the same thing happens. Its stuck in a loop. I would like to save my files, but I think that the only option I have is to get another drive for her. If I could get the files off my system, I would not hesitate to wipe the drive. Do I have other options?

  Thanks anyway. I'll have to wait for my drive to arrive but I will try the reset of the bios and see if that helps. At this stage, it can't hurt.

• InDesign CC 2015 - starts not at all after the last update! Help!

  Here go us.

  Since the last update for CC, InDesign has completely stopped working for me.

  I have uninstall/reinstall several times.

  I tried to open it with another Windows user.

  I used the creative cloud cleaning tool.

  I deleted all the files of preference (including cache)

  I just reinstalled it again and again, nothing.

  All I get is a Windows notification that there is a problem with the program and Windows to send a crash report.

  Help, please!

  CC programs works except InDesign.

  Yes, you can install previous versions by opening your cc app > apps > find applications > view previous applications > install id > cc 2014

• VMware Player installation program starts not at all on win7 Enterprise x 64

  Hello!

  My problem is, when I click on Setup nothing happens, UAC asking permission, click OK, but not even an error message... (the same scenario with UAC disabled)

  I would like to install vmware player on the host Windows 7 Enterprise x 64 (HW virtualization enabled in bios, CPU AMD Athlon X 2)

  This could be a bug in MS, I don't know, but extremely annoying

  Any idea would be great!

  Hello

  Check if you have a process named fixcamera.exe - if yes - kill

  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Skype starts not at all, showing offline icon in the taskbar

  Hello everyone, I have a very annoying with Skype problem since I installed the IP camera on my Samsung phone, I tried to solve this problem for weeks, I finally got to Skype successfully opened by decommissioning in Skype 6.14, but when I go into my video settings, it shows the (completely uninstalled) ip as my selected webcam camera and blocks Skype soon after (1-3 seconds after the opening of the video settings). I tried to make calls, it also blocks my Skype, but I can instant message, I would go back to 6.18 Skype and make it work.

  Thank you

  Fixed! I had to reinstall the drivers and ip camera cards and to uninstall once more! It works fine now!

• Equium P300-19O does not start

  Hi all

  I have an Equium P300-19O, which I have had the problem. Now the pc doesn't even start not at all. When I turn it on, there is not even a power light and it doesn't do anything.
  Could someone of you please advice me to solve this problem and resuscitate Equium P300-19O?

  Best regards

  Taro

  > Could someone of you please advice me to solve this problem and resuscitate Equium P300-19O?
  You must understand the hat on this virtual path that nobody of can say for sure what is wrong there and we can only speculate on the potential problem.
  Who knows what's wrong there. Maybe there is a problem with electronic control gear.

  Unplug the power plug, remove the battery and leave it for a while. Try to start the laptop with AC power only.
  When you connect the AC power supply is LED on indicator system turned on?
  Is there a reaction when you press the power button / stop?

• Equium P300-16 t winlogon.exe error - badimage

  Hello

  I encounter an error that my Equium P300-16 t starts to windows Vista.

  This is what happens...

  Winlogon.exe - BadImage
  C:\windows\system32\KBDUK. DLL is not designed to run on windows or it contains an error. Try to reinstall with original media or contacting... blah blah blah.

  It began to appear after I tried to uninstall my Norton antivirus has expired. And it seems that the result of this error is that I can not connect detect wireless networks. so no internet! the age of darkness here I come.

  I don't know who this KBDUK file is so I am worried to take it off.
  I tried to restore to before I made changes but its made no difference - I broke it.

  Any help would be much appreciated.

  Thank you

  Dave

  Hello

  Maybe this KBDUK. DLL file is a virus or has something to do with your old Nero

  If you Norton from your system you must also run the Norton removal tool that you can download from the homepage of Symantec. It removes all the files of Norton products.
  Check this box!

  If it doesn t work I would try a system restore to an earlier point. After that you can try to delete Norton again.