Access report data USE

Similar Questions

• Advance access insert data using ViewObjects

  Hello
  
  I'm trying to access the data before insertion (before execution of super.doCommit ()) using viewobjects, but I only get the validated data. Is it possible to get before inserting data using viewobjects?
  
  The following Java code:
  
  String amDef = "oracle.srdemo.model.AppModule";
  Config = "AppModuleLocal";
  Am = ApplicationModule
  Configuration.createRootApplicationModule (amDef, config);
  ViewObject vo = am.findViewObject("DatetestView1");
  System.out.println ("query will return" + vo.getEstimatedRowCount () + "lines...");
  vo.executeQuery ();
  While (vo.hasNext ()) {}
  Line curPerson = vo.next ();
  System.out.println (VO.getCurrentRowIndex () +'.) "+
  "curPerson.getAttribute ("Id") + ' ' + '.
  curPerson.getAttribute ("Dataini"));
  }
  Configuration.releaseRootApplicationModule (am, true);
  
  I use JDeveloper 11g, a Web of Fusion and ADF business components Application
  
  Thanks in advance.

  You can only get data uncommitted in the session where you inserted or changed.
  If you use createRoorApplicationModule(), you always get a new session (server side), therefore, you do not see the data not validated.

  Timo

• to access the data of hyperteminal using labview

  Hello Sir,

  I'm a problem to access the data of hyperterminal directly through LabVIEW. Whenever I go to hyperterminal and the text capture option allows you to select data and save it in another file. My application requires automatic access of hyperterminal instead of manually do each and bread time. Is this possible? I enclose a VI that I tried. Please give me a suggestion about the present.

  Do not use hyperterminal. Use the series of VISA. Look at the examples that come with LabVIEW.

• We can access the wise report date?

  Hi all
  can access us report date wise if yes, then please guide me?
  
  I did text items two, one for the start date and a second for date end in form.if I have date in these two text like that elements
  
  start date: 08/01/2009 end date: 08/08/2009 and after pressing the when_button_pressed and he give me the report up to the indication of date, is possible?
  
  Please help me and me more guide
  
  Thanks in advance
  
  Sarah

  He must put that in your report query, not anywhere in the form.

• How can we get the details of the traffic for the spaces for example, users access report by place (all users)

  How can we get the details of the traffic for the spaces for example, users access report by space (for all users), DB tables can be used to get information, such as for example: users who have logged in - never

  You can use analytics. WebCenter Analytics comes with a number of events out-of-the-box for which it brings together measures which are very useful.

  You can check in the WebCenter Analytics database schema. WebCenter Analytics Dashboards are present in the scheme of ACTIVITIES and are modeled in the form of a star schema.

  The schema includes 2 types of tables. FACTS analytical tables are used to store instances of specific events. For each event, a specific FACT table is present, for example for page views, the views of space, connections and so on. These tables contain a timestamp for the moment, that the event is occurred and integer ID these descriptive reference data stored in DIMENSION tables.

  DIMENSION tables contain descriptive information about the entities associated with events. Size examples are pages, applications, groupspaces, users and so on.

  See the details of the table all the under http://docs.oracle.com/cd/E23943_01/webcenter.1111/e10148/jpsdg_app_aschema.htm#JPSDG10767

  If you want to custom event.that track, as you can get. see this blog entry

  Quobell technology - portal WebCenter: WebCenter Analytics: define and save custom events

• VDP: Cannot access the data store

  Hello!

  I have a problem.

  Every day I see error for one of my servers in "reports":

  2016-07 - 05T 06: 00:47.971 + error 06:00-[7F2F3FA5E700] [Originator@6876 = transport sub]

  Cannot use hotadd mode to access the FileSrv1/FileSrv1_1.vmdk [Cisco2-datastore]: can't get using this method.

  (Mounting VM using vm-3198 transport hotadd failed: cannot access the data store for one of the drives of the Machine virtual FileSrv1..)

  At the same time, I havn't this error for the other servers.

  "FileSrv1" has not has installed "VMWare tools". After the instalation "VMWare tools" on this server, the problem is resolved.

• Cannot access another data base "ROWTYPE.

  Hi all, I am using SQLDeveloper 3.2.20 on Oracle 11 g 2 and teacher of Windows 7 sp1 and so far, smooth sailing.

  I use the SCOTT/tiger account i.e. access, certainly no role sysdba privileges.

  I'm practicing my codes and the use of explicit cursors generate following errors:

  Error report:

  ORA-06550: line 5, column 17:

  PLS-00352: cannot access another data base "ROWTYPE.

  ORA-06550: line 5, column 17:

  PLS-00201: identifier 'EMP_CURSOR@ROWTYPE' must be declared.

  This is the code (I tried orcl.scott.emp_cursor@ROWTYPE, but which no longer works)

  Set serveroutput on;

  DECLARE

  CURSOR emp_cursor IS

  SELECT EmpNo, ename

  FROM scott.emp;

  v_emp_record emp_cursor@ROWTYPE;  -don't even try the 1 by 1

  number of v_sqlcode;

  v_errm varchar2 (64);

  BEGIN

  IF NOT emp_cursor % ISOPEN THEN - EXTRACTION lines only when the cursor is opened!

  OPEN emp_cursor;

  END IF;

  LOOP

  LOOK INTO v_emp_record emp_cursor; -Gets the 1st row of cursor!

  OUTPUT WHEN emp_cursor % NOTFOUND or emp_cursor % NOTFOUND IS NULL; -in case no line

  INSERT INTO (empid, empname) tmp_list - inserts in a temporary list

  VALUES (v_emp_record.empno, v_emp_record.ename);

  END LOOP;

  COMMIT;

  NARROW Emp_cursor;

  EXCEPTION

  while others then

  v_sqlcode: = SQLCODE;

  v_errm: = SUBSTR (SQLERRM, 1, 64);

  DBMS_OUTPUT. Put_line ('SQL' | v_sqlcode |) '  ' || v_errm);

  END;

  /

  I begin to suspect that it is something 'access privilege '.

  Can someone point me in the right direction please?

  Hello

  Leila says:

  Ahhh, I see where I went wrong, Oracle' a global temporary table is not the same as the temporary table in SQLServer, I first need to create the temporary table, then drop it then.

  Remove the table only if you expect never to use again.  Otherwise, let it stay there.

  "Global temporary table" is a misleading name in Oracle.  The table itself is permanent, but the data in the table are temporary.  The data is deleted automatically at the end of the transaction or session, depending on whether the table has been created with ON COMMIT DELETE ROWS or ON COMMIT PRESERVE ROWS.

  Problem is, there is no data in the temporary table after executing the PL/SQL block although DBMS_OUTPUT displays data from test loading one!

  The default value for global temporary Tables is ON COMMIT DELETE ROWS, which means that the table is cleared whenever you make a COMMIT to auotmatically.

  You probably want ON COMMIT PRESERVE ROWS, like this:

  CREATE a table temporary global tmp_list (NUMBER, tmp_empno tmp_ename. VARCHAR2 (10)) ON the COMMIT PRESERVE ROWS;

• Tecra A4: Matsu * a s uj - 831 - cannot access any data CD

  Hello

  I have a new toshiba tecra a4
  I have the combo dvd: Matsu * a UJ - 831S
  and I have the following in less than 4 months of use problem:
  Since yesterday I can not access any data cd, audio CD are ok, so on DVD.
  When I go to my computer and click on the drive I get the message "D:\ not accessible incorrect function".

  I tried to uninstall the software, etc. But nothing.
  I tried to boot from the dvd from Toshiba, is the beginning, I tried to boot from cd does not start.
  so the problem is hardware
  I downloaded the firmware (Loder_831_V102.exe), but he said: "the target disk is not connected" and I can't upgrade.

  So what is the problem, can it be fixed?

  Hello

  It's not easy to tell how to solve this problem.
  But first of all, you can try to remove this device in the Device Manager.
  After startup, the operating system should recognize the drive again.

  If this procedure doesn't help, well it could be a disk failure.
  If the warranty is valid, you should ask the ASP for a replacement.

  Good bye

• How to access the data in the row (text of children) in a pragmatic control tree?

  In LabVIEW 2010, I entered the data in row a tree with pragmatism control using the Add item and providing the child text table and the child tag for the line. When a row in the tree control is selected, I can get the line label in the Value property of the tree. But how do I access the data in the child text table when the line is selected? I can't seem to find a tree control property or method which will return data back.

  What I'm trying to do is: once a line in a tree is selected and a button is pressed, if the line tag is valid, I want to transfer all the data in row in another tree the same formatting. For this I need the data for the tree line and the line that was selected. I don't find a way to get access to these data of the line when it was composed in the tree.

  Can someone tell me how to access pragmatically the child text or row data in a tree control from a selected line in the tree? I have the label of the line, but how do I access data?

  Thank you for your help.

  Looking through numerous examples, I found how to do this using the properties ActiveItemRow and ActiveColNum, but I can't find these documented properties anywhere using LabVIEW. Even research through aid could not do anything about them.

  Where these important parameters are documented?

  Why they do not appear in the help?

  Are there other ways to access the data in the row (child text) form a selected line in a tree control?

• W510: How do I access my data from a failed hard drive after the failure of the motherboard

  I made a mistake and has paid for major .

  This error pouring a drink sweet on my laptop. I know, I know, my keyboard can and protect against damage caused by the spill, but it was a drink together. In any case, I panicked and shut down the system and it has upset and removed the keyboard. And be the impatient person that I am, I made what was probably the ultimate error. I do not give everything save a sufficient amount of time to dry and I tried to boot the system. There is my computer. Or at least I think.

  Symptoms: It began at the start, kept a beep, sometime just close and will start.

  In any case, I guess that my laptop went kaput. Now to the point of this thread. I had not been a recent backup and can't remember when the last backup was actually made. Assuming that my hard drive is ok, I want to get all my data, so I saw several options:

  -Send the system to a data recovery service where I will not pay less than $300, but probably 2 to 3 times what

  -buy an equivalent model laptop and put the HARD drive in there

  -by an external SATA hard drive enclosure and mount it via USB on another computer

  I bought a box external and assembled this evening. I had read about the data access of difficulty with a system non-Lenovo because of encryption of the data. I proved that by linking it to my work (a Dell) laptop and I couldn't access my data directories. If I have access to an another Lenovo Thinkpad, I'll be able to access the data if connected via USB? I had read that I can access the contents of disc hard if it is connected to an another Thinkpad, but I knew not that if it means that I have it connected via SATA connection or if there is work through the USB port.

  I'll appreciate any suggestions for accessing my data.

  Best regards!

  All,

  Thanks for the suggestions.

  I was able to recover my computer and all data on it.

  Just to describe what I have done, here are the details.

  Because of my concern about a failure of the motherboard, I bought a used/given new keyboard and an external SATA drive enclosure. I was not able to properly take possession of the car from my other laptop, but I was able to access the data in Mode without failure. With my data, I plugged the hard drive and the new keyboard in and started without problem.

  Thanks again,

  brent86

• to access the data of the children with the static accessor of parent class

  I'm new to LVOOP. I'm trying to create accessors of data in the parent (static) class and use them in the child's class. I don't need them to be dynamic becase the accessors are identical for child and parent. Is it possible to access the data of a class without creating an accessor for each class?

  

  

  It is the dynamic method that I created that finally works. Once I found the VI "call Parent Method.vi' everything has worked.

  So now I created all my data as static accessors and my methods are dynamic (assuming that they do).

  Thanks for all the help.

• How can I access the data associated with an event within the event handler function?

  Hello

  In my LabWindows code, I try to use a DLL that has been developed in .NET (c#).  I used the built-in labwindows Wizard that converts the DLL to a usable 'instrument'.  Almost everything seems to work, except that I have 1 problem.

  There is an event (defined in the DLL) that I am able to detect.  I know that the reminder of the event is called at the right time.  But the problem is that in this function, I can't access the data that is supposed to be attached to the event.  It worked fine in c#, but I don't know how to do in LabWindows.  Here's what looked like in c# event handler function:

  void AppLoaderEventCallback (CommonLib.CommandResult MyResults)

  {

  MyResults is used in the body of this function

  }

  But in LabWindows, I can't seem to access the MyResults data structure.  Here's what I do:

  public static int CVICALLBACK AppLoaderEventCallback (CommonLib_CommandResult MyResults)

  {

  I can't access MyResults here

  }

  Can you help me with this?  I'm doing something wrong?

  Thank you very much for your help.

  -Mike

  I think that your statement of callback function is perhaps not quite correct. Look using the parameter "callback function" function Panel of the generated __Create function associated with this event. This shows the declaration of the callback function - make sure that your callback function is declared in the same way.

• Access waveform data passed in a DLL

  Hello

  I'm working on a LabVIEW application that processes the continuous stream, 2 ms/s, 32 analog input channels, each channel. This application has a DLL built in order to improve the table great handling performance in LabVIEW. Initially, I fed the DLL with a double 2D array returned by DAQmx Read VI and worked on a controller embedded high performance. However, the new requirement is, I need to treat timestamps as well as each Read call to HAVE him, and that's why I need to feed the DLL with the waveform data returned by DAQmx Read. Output waveform contains the timestamps I need.

  The problem is, I don't see an easy way to access the data of waveform within the DLL (developed using Visual Studio C++). The type of waveform data seems to be a C++ class, and who looks like I need to add a considerable amount of code to retrieve the data within the class of waveform.

  My question is, LabVIEW naturally does support access to waveform data in a DLL and if there are examples of code? I understand, I can you can also process outside the DLL waveform data and feed the DLL with the array element in the waveform data. However, I have concerns about whether if performance will be significantly affected.

  Thank you!

  Donghui Yin

  Doy says:

  Sorry for the incomplete design details. If you are interested, I have used high cards, not PXI. This is why I don't have a problem of bandwidth PXI. Special assistance, I need right now is the note, 'External Code in LabVIEW using' manual on Page 2-7:

  "Note waveforms, digital signals and digital tables can be passed through shared
  "libraries, but access to the data inside shared libraries is not supported at this time."

  Thank you.

  I think that the text is clear enough! There is no documented API for access to international it data waveform within an external code module. The generated data type the node in library call for such a parameter is HWAVE or something, indicating that it is an opaque handle whose implementation details are deprived of LabVIEW. Since there is no documented API for access to her international of such data there is simply no way to access it.

  And I didn't know all the functions that are exported in the LabVIEW executable that I could easily connect with the waveform dataype. Even if I had, we still do not know the prototype (aka list of parameters and types) of these functions.

  Your only viable solution is to work with the data types supported. Your C code, or possibly the LabVIEW (table handles) native data type, either passing data in table C. else pointer would require reverse engineering of disassembly, a legally questionable approach, but also a lot of your time. And everything you would find this way I would be very hesitant to use in what feels, walks or crawls like a real-world application, since you can't be sure that your conclusions will work for any situation. It is also likely that your results will depend on some attributes may change between versions of LabVIEW.

• (Question LVOOP) How one access the data of another class in another class?

  Hello-

  Ass title suggests, how do I access another class (or is it class?) data from another (different) class?  I will attach a picture showing where my problem is...

  I was told this:

  http://zone.NI.com/reference/en-XX/help/371361H-01/lvhowto/setting_scope_classes/

  May contain some helful info, but I can still understand how to unbundle Renault of classes inside the component class data (as seen in the attached photo).

  I think there could be something simple I'm missing here when it comes LVOOP or OBJECT-oriented programming in general... If any of you are willing to help me, it would be much appreciated!

  Thank you!

  -pat

  Personal data are always private, you can never set public. Unbundle cluster function can be used only on the thread of class when he is in the class. If you need to access private data, you must create accessors.

  It of simple, just the class right click and select new, VI for access data members. He invites you to a dialog box to fill you with what you want to create, elements of data and if you want them available through property nodes (recommended). Once completed, this will generate the Afterward screw., you can use in any other VI. The nice thing about making them nodes of property is that you can plop down a property node and it thread class, and all the created accessor functions will appear in the list.

• Cannot access the data on Western Digital My Book Essential.

  Original title: Western Digital My Book Essential

  Cannot access data stored on My Book Essential 3 TB.  Desktop computer no longer recognizes.  Laptop sees it, but I can't access the data.  Cord replacement binding have at the least visible on laptop & office 'discover' for a long period of time.  An hour pending with Western Digital with no live person on the line.  Am now thinking the drive can't be fixed and Western Digital is not actually support.

  If I buy a replacement, how to make the data from the old to the new?  All suggestions will be useful.

  Moved from IE

  If you do not see the data, you can not transfer it. Keep trying with Western Digital.