Tecra A4: Matsu * a s uj - 831 - cannot access any data CD

Similar Questions

• Firefox starts, but cannot access any website.same issue is experienced with Chrome, not Explorer

  Hello, I have a problem with surfing with Firefox. The browser starts but cannot access any Web site. The same question is experienced with Google Chrome. However, Internet Explorer works smoothly. Thank you

  Some problems occurs when your Internet security program has been implemented.
  trust the previous version of Firefox, but not more acknowledges your
  update as being approved. Now how do I solve the problem: to allow
  Firefox to connect to the Internet

  • Make sure your Internet security software is up-to-date (for example, you are using the latest version).
  • Delete Firefox to list your program of programs approved or recognized. For detailed instructions, see

  Configure the firewall so that Firefox can access the Internet. {web link}

• Zune and Windows 8 "error reading the Zune software cannot access important data on your Zune." Try to disconnect and reconnect it. If the problem persists, contact customer support. "

  I have a Zune and Windows drive * on my desk. Everything worked fine until today while I got the following messages. In Zune: "Error reading the Zune software cannot access important data on your Zune. Try to disconnect and reconnect it. If the problem persists, contact customer support. "" Then on the computer: "USB device not recognized." "

  I have a Zune and Windows drive * on my desk. Everything worked fine until today while I got the following messages. In Zune: "Error reading the Zune software cannot access important data on your Zune. Try to disconnect and reconnect it. If the problem persists, contact customer support. "" Then on the computer: "USB device not recognized." "

  Message error "the Zune software cannot access important data on your Zune.

• VDP: Cannot access the data store

  Hello!

  I have a problem.

  Every day I see error for one of my servers in "reports":

  2016-07 - 05T 06: 00:47.971 + error 06:00-[7F2F3FA5E700] [Originator@6876 = transport sub]

  Cannot use hotadd mode to access the FileSrv1/FileSrv1_1.vmdk [Cisco2-datastore]: can't get using this method.

  (Mounting VM using vm-3198 transport hotadd failed: cannot access the data store for one of the drives of the Machine virtual FileSrv1..)

  At the same time, I havn't this error for the other servers.

  "FileSrv1" has not has installed "VMWare tools". After the instalation "VMWare tools" on this server, the problem is resolved.

• Cannot access another data base "ROWTYPE.

  Hi all, I am using SQLDeveloper 3.2.20 on Oracle 11 g 2 and teacher of Windows 7 sp1 and so far, smooth sailing.

  I use the SCOTT/tiger account i.e. access, certainly no role sysdba privileges.

  I'm practicing my codes and the use of explicit cursors generate following errors:

  Error report:

  ORA-06550: line 5, column 17:

  PLS-00352: cannot access another data base "ROWTYPE.

  ORA-06550: line 5, column 17:

  PLS-00201: identifier 'EMP_CURSOR@ROWTYPE' must be declared.

  This is the code (I tried orcl.scott.emp_cursor@ROWTYPE, but which no longer works)

  Set serveroutput on;

  DECLARE

  CURSOR emp_cursor IS

  SELECT EmpNo, ename

  FROM scott.emp;

  v_emp_record emp_cursor@ROWTYPE;  -don't even try the 1 by 1

  number of v_sqlcode;

  v_errm varchar2 (64);

  BEGIN

  IF NOT emp_cursor % ISOPEN THEN - EXTRACTION lines only when the cursor is opened!

  OPEN emp_cursor;

  END IF;

  LOOP

  LOOK INTO v_emp_record emp_cursor; -Gets the 1st row of cursor!

  OUTPUT WHEN emp_cursor % NOTFOUND or emp_cursor % NOTFOUND IS NULL; -in case no line

  INSERT INTO (empid, empname) tmp_list - inserts in a temporary list

  VALUES (v_emp_record.empno, v_emp_record.ename);

  END LOOP;

  COMMIT;

  NARROW Emp_cursor;

  EXCEPTION

  while others then

  v_sqlcode: = SQLCODE;

  v_errm: = SUBSTR (SQLERRM, 1, 64);

  DBMS_OUTPUT. Put_line ('SQL' | v_sqlcode |) '  ' || v_errm);

  END;

  /

  I begin to suspect that it is something 'access privilege '.

  Can someone point me in the right direction please?

  Hello

  Leila says:

  Ahhh, I see where I went wrong, Oracle' a global temporary table is not the same as the temporary table in SQLServer, I first need to create the temporary table, then drop it then.

  Remove the table only if you expect never to use again.  Otherwise, let it stay there.

  "Global temporary table" is a misleading name in Oracle.  The table itself is permanent, but the data in the table are temporary.  The data is deleted automatically at the end of the transaction or session, depending on whether the table has been created with ON COMMIT DELETE ROWS or ON COMMIT PRESERVE ROWS.

  Problem is, there is no data in the temporary table after executing the PL/SQL block although DBMS_OUTPUT displays data from test loading one!

  The default value for global temporary Tables is ON COMMIT DELETE ROWS, which means that the table is cleared whenever you make a COMMIT to auotmatically.

  You probably want ON COMMIT PRESERVE ROWS, like this:

  CREATE a table temporary global tmp_list (NUMBER, tmp_empno tmp_ename. VARCHAR2 (10)) ON the COMMIT PRESERVE ROWS;

• New user cannot access any area of activity

  Hi, I use Discoverer Desktop 9.0.4.43.17 and administrator of 9.0.4.43.18 and I have a new user cannot access any sector of activity, I tried to create a new business district to test and access the Security window on the Client of Directors for this user and my user (works very well!), for my user that this new BA shows normally on the desktop but for new user the selection of business on Assistant workbook area shows nothing. It's something to measure new users to access the space business?
  
  Published by: user2997975 on 06/04/2009 07:19

  Hello
  As suggested by Rod it sounds as if you may have several EUL in the same prod73. Try to connect again, but this time go to tools | Options and click the EUL. It is the last tab on the right side and you may need to click the button to the right (next to connection) several times before seeing the EUL tab.

  Under the EUL tab, make sure that the EUL you want to connect is selected. If it is bad you will need to change it, click on the OK button and then reconnect to the database using file | Connect to the database.

  This time you must point to the right EUL.

  Best wishes
  Michael

• DVD Super Multi Drive problem - cannot access any CD - Satellite A100

  Hi, 1st post:

  My Satellite A100 features a DVD Super Multi drive, which worked very well. However I cannot now access any CD - error message ' D: / is not accessible. The request could not be performed because of an i/o device error."is displayed.

  However I can still access DVDs without problem. Can anyone help?
  Thank you.

  can try this
  Right click on the drive w / the problem
  Properties
  Recording tab
  and then check the box "enable recording on this CD player.

  If this does not solve it you have Roxio Easy CD Creator is installed to check this
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 315350

  or if you get an I/O device error message, this problem may occur when Windows tries to use a transfer mode that can not use your CD player
  RESOLUTION
  To resolve this problem, change the transfer mode for your CD drive in IDE channel properties. To do this, follow these steps:
  1. Click Start, right click my computer and then click on manage.
  2. under the (Local) computer management, click Device Manager.
  3. in the right pane, expand IDE ATA/ATAPI controllers.
  4 right-click the channel where your CD drive is connected, and then click Properties. In general, this channel is secondary IDE channel.
  5. in the Advanced Settings tab, in the zone transfer Mode for the device that represents your CD-ROM drive, click PIO only. As a general rule, this device is device 1. And then click OK.
  If the problem is not resolved after you change the transfer mode for the secondary IDE 1 channel device, your CD drive should not be located there. Use the same procedure to return to the DMA transfer mode if available. Then, repeat these steps to change the transfer mode for IDE devices in the following order until the problem is resolved:
  Primary IDE channel, device 1
  Secondary IDE channel, device 0
  Channel IDE primary note, device 1 is connected to your boot disk. It's the hard drive that contains your operating system.

  hope that fix you :)

• Cannot access the data on Western Digital My Book Essential.

  Original title: Western Digital My Book Essential

  Cannot access data stored on My Book Essential 3 TB.  Desktop computer no longer recognizes.  Laptop sees it, but I can't access the data.  Cord replacement binding have at the least visible on laptop & office 'discover' for a long period of time.  An hour pending with Western Digital with no live person on the line.  Am now thinking the drive can't be fixed and Western Digital is not actually support.

  If I buy a replacement, how to make the data from the old to the new?  All suggestions will be useful.

  Moved from IE

  If you do not see the data, you can not transfer it. Keep trying with Western Digital.

• Cannot access any shared folder on the network of windows 7 Professional

  Hello

  I have a very strange problem.

  I have a home network with 4 computers.
  I can share files from any computer to the other.

  Recently, I bought a new laptop Lenovo E530 in with Windows 7 Professional installed on it.

  The problem is that I can't access any shared folder on my home network by '\\com-name '.

  I cannot yet access the folders on the computer that is shared from the inside, by specifying there name with the prefix "\".

  However, I can ping or even make remote desktop on other computers on my network.

  I can also access shared folders on my Windows 7 Professional from other computers.

  Looks like there is something wrong with the configuration of my OS from Windows 7 Professional blocking access to any shared folder on my network.

  I get the following error message:

  Windows cannot access \\comp-name

  Check the spelling of the name. Otherwise, it could...

  Error code: 0 x 80070035

  The network path was not found.

  I tried to use the button to diagnose, but without success.

  Help, please

  Dudi.

  Hello

  I suggest you try all the steps from the following link:

  Sharing of files and printers
  http://Windows.Microsoft.com/en-in/Windows/sharing-files-printers-help#sharing-files-and-printers=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See also: File and printer sharing: frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows7/file-and-printer-sharing-frequently-asked-questions

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• The VPN Clients cannot access any internal address

  Without a doubt need help from an expert on this one...

  Attempting to define a client access on an ASA 5520 VPN that was used only as a

  Firewall so far. The ASA has been recently updated to Version 7.2 (4).

  Problem: Once connected, VPN client cannot access anything whatsoever. Client VPN cannot

  ping any address on internal networks, or even the inside interface of the ASA.

  (I hope) Relevant details:

  (1) the tunnel seems to be upward. Customers are the authenticated by the SAA and

  are able to connect.

  (2) by many other related posts, I ran a ' sh crypto ipsec her "to see the output: it

  appears that the packets are décapsulés and decrypted, but NOT encapsulated or

  encrypted (see the output of "sh crypto ipsec his ' home).

  (3) by the other related posts, we've added commands associated with inversion of NAT (crypto

  ISAKMP nat-traversal 20

  crypto ISAKMP ipsec-over-port tcp 10000). These were in fact absent from our

  Configuration.

  (4) we tried encapsulation TCP and UDP encapsulation with experimental client

  profiles: same result in both cases.

  (5) if I (attempt) ping to an internal IP address of the connected customer, the

  real-time log entries ASA show the installation and dismantling of the ICMP requests to the

  the inner target customer.

  (6) the capture of packets to the internal address (one that we try to do a ping of the)

  VPN client) shows that the ICMP request has been received and answered. (See attachment

  shooting).

  (7) our goal is to create about 10 VPN client of different profiles, each with

  different combinations of access to the internal VLAN or DMZ VLAN. We do not have

  preferences for the type of encryption or method, as long as it is safe and it works: that

  said, do not hesitate to recommend a different approach altogether.

  We have tried everything we can think of, so any help or advice would be greatly

  Sanitized the ASA configuration is also attached.

  appreciated!

  Thank you!

  It should be the last step :)

  on 6509

  IP route 172.16.100.0 255.255.255.0 172.16.20.2

  and ASA

  no road inside 172.16.40.0 255.255.255.0 172.16.20.2

• AutoConfig error: ORA-12705: cannot access NLS data or invalid environment specified files

  Hi, experts:

  When it is run on the database layer, obtained adautocfg.sh

  ====

  ....

  Executable: /ap10/immted/db/tech_st/11.2.0.3/bin/sqlplus

  SQL * more: Production of liberation 11.2.0.3.0 Sat Jun 28 23:30:17 2014

  Copyright (c) 1982, 2011, Oracle.  All rights reserved.

  Enter the value 1: enter the value 2: enter the value 3: ERROR:

  ORA-12705: cannot access files of NLS data or invalid environment specified

  =====

  We have 12.1.3, 11.2.03 and Linux. I've issued $unset NLS_LANG, set ORA_NLS10 = "' in the .env file." What should I check?

  In the $ORACLE_HOME/appsutil/contextfile.xml the following:

  "s_db_oranls" = "unix" OSD > /ap10/immted/db/tech_st/11.2.0.3/nls/data/9idata < / ORA_NLS >

  Thanks and greetings

  Now, I got the same error when doing $sqlplus / as sysdba. $sqlplus/nolog is fine.

  Hello

  AutoConfig was successful before?

  Are there any recent book.

  If you're upgrading from 11.2.0.3 or recently updgraded to 11.2.0.3 database, then course do perofmed you listed in article - 7 for creating data 9i of the below TechNote MOS.

  Interoperability note Oracle EBS R12 with Oracle Database 11 g 2 (11.2.0.3) (Doc ID 1585578.1)

  See also below the TechNote if is not for 11.2.0.3 but his relevant:

  Upgrade 9i to 10 g 2 fails with ORA-12709: error loading creates characters of the base set (Doc ID 732861.1)

  Thank you

  A H E E R X

• Cannot access the data on the old hard drive - old computer is dead

  I just bought new HP Pavilion a6547c desktop computer.  My old computer doesn't turn on.  Have hard drive in HP Tower.

  Computer recognizes it - are there files - but I can't access it.

  Have fallen by security and attempted to change the property - but get "unable to display current owner" from the old drive.

  I am the owner of the old drive.

  Someone knows how to fix this?

  Hi DebbyO

  Please download and install the fix from the following link.

  http://www.howtogeek.com/downloads/TakeOwnership.zip

  Please check out the TakeOwnership.zip file on the desktop, and then double-click the InstallTakeOwnership.reg file to install it.  Then navigate to the folder that you are trying to access, right-click on the folder and click Take Ownership.

  Now try to access the folder. You should be able to access the folder and view your files.

• Cannot access any site to play online games

  Hi to anyone who can help me with this.  I have Windows XP and downloaded IE 8 some time ago.  Never had any problems until about two weeks ago.  Every time I have access to MSN GAMES, GAMES YAHOO, 'what' that is the games and try to play online, my computer completely freezes... I mean completely and it hangs forever.  Not even doing Ctrl + alt + delete to close the program.  I have to manually turn off the computer and boot from fees.  I get no error message, nothing... just a little noise beep (not like a pop-up), then the big freeze.  I tried to play on the web games on my second computer and the same thing is happening EXCEPT, I have now the message on IE shutting and something to do with the DEP (Data Execution Prevention).  I checked the Advanced tab in the system but can not change a thing.  It's so frustrating because it just started to happen.  I even uninstalled and reinstalled IE 8, went through all the procedures I can think and basically nothing changes.  Can someone please help?  Thank you.

  For the purposes of troubleshooting, I suggest to test websites on another browser to see if the problem is directly related to something in Internet Explorer, or elsewhere.

  This gives a test:

  1. go on http://www.mozilla.com/en-US/
  2. click on download, click on "Run" and follow the instructions to install
  3. after installation, restart the system and try to access these Web sites

  * You may need to install Adobe Flash Player plugin, if the content does not load. In most cases, if his need, it prompts.

• OfficeJet 8500 has Premium: cannot access any embedded web server...

  I'm changing the address of electronic mail (from a previous owner of the printer) by going to "scan to e-mail" settings in the HP utility and by hitting the link to enter the integrated Web server.  I was able to access the built-in Web server (despite receives a lot of restricted warnings) in typing the IP address 192.168.1.6 for a brief period, but I still couldn't change the e-mail settings as kepyt I get access denied the warnings.  Then I can I have messed up it by checking the Https redirection feature and now can not access EWS for all.  Is there a way to return to the main page of the EWS?  Now, all I get is a blank page when I click on go to EWS in the utility section of HP.    I would like to modify the e-mail settings which I believe have been implemented by the former owner.  I have restored the default settings of the network twice and nothing has changed.  Any help would be greatly appreciated that I use an older printer without help of the guarantee.

  Thank you

  Hi sojoey,

  I recommend you try a different browser than the one you are using. You can try Firefox, Google Chrome, etc. If you get pop-ups about certificates for HTTPS, click on continue anyway.

  We'll see what happens!

• Cannot access any browser + Taskmanager register Antivirus

  Hello
  I have a system with Windows XP Professional (SP2) + McAfee Antivirus installed... After inserting my pen of friends drive, I can't able to access taskmanager (Mozila Firefox browser), my Antivirus (McAfee), dialog box run and prompt etc... But I can able to run MATLAB, SIMULINK. Even after safe mode with administrator password I can't able to access which above I said. If I think mozila it opens but quickly it closes. Safe mode with networking mode command prompt / safe as I can't access the task or the command prompt, the registry Manager... Please help me...

  Kind regards
  Ubabmar.

  Hello

  Method 1.
  I suspect that it is a virus and I highly recommend to run a Scan of Virus online.
   
  Sometimes the security program installed might not be fair enough. I also recommend you update your security software regularly.
   
  a. follow the link below to start the free online scan:
  http://OneCare.live.com/site/en-us/default.htm
   
  b. run the malware removal tool from Microsoft.
  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
   
  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  Method 2.
  Let us first start the sfc scan and check if there are any file system corruption.
  a. to do this, click Start, click programs, accessories principally made, right click Guest and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  b. type the following command and press ENTER:
  sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 3.
  If the problem persists, then create a new user profile and then copy your current users assigning to this profile. For more information, see:
  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783

  How to copy data from a corrupted to a new profile in Windows XP user profile
  http://support.Microsoft.com/kb/811151

  How to recover damaged Windows XP user profile
  http://support.Microsoft.com/kb/555473

  I hope this helps.