access the variable got on another timeline

Similar Questions

• To access the variables from a movieclip timeline

  Hey everybody!

  Normally, I use MovieClip (this.parent) to access a variable that is outside the movieclip I am writing code in. However, this does not work in both functions.

  For example:

  function editMainText (e:Event) {
       MovieClip(this.parent).headline.text = "Hello"
  }
  

  works.

  but

  function editMainText (e:Event) {
       function editText (e:Event){
            MovieClip(this.parent).headline.text = "Hello"
       }
       editText(null);
  }
  

  does not work

  There is probably some small errors in my code, but I need mainly to learn how to change MovieClip (this.parent) to work within the second function.

  Thank you!

  John

  does not work.

  In most all cases I've seen, nested functions will stand on their own

  function () {} editText
  MovieClip (this.parent).headline.text = 'Hello '.
  }

  function editMainText (e: Event) {}
  editText();
  }

• to access the variables in a page in another page qml

  Hey gang,

  I've been watching some of the other problems autour to access the variables from one page on another page qml qml, and I can't get this to work.

  I have a page, main.qml with a NavigationPane.  The NavPane has a Page and some containers.

  I have a property defined in the NavigationPane like this:

  NavigationPane {
      id: mainNav
      backButtonsVisible: true
      property int customInt: 2
  
      onCustomInt: {
          console.log("  -------------> App: customInt");
      }
  

  I have a ComponentDefinition for next page, called SettingsPage.qml.  In the settings, I have two drop-down lists and a slider.

  Page {
      actionBarAutoHideBehavior: ActionBarAutoHideBehavior.HideOnScroll
      id: pgSettings
  
      ScrollView {
          id: pageScroller
          scrollViewProperties.initialScalingMethod: ScalingMethod.AspectFit
          Container {
              topPadding: 25
              bottomPadding: 25
              rightPadding: 25
              leftPadding: 25
              Label {
                  text: "Settings"
                  textStyle.fontSize: FontSize.XLarge
              }
          Container {
              id: dropDown1
              topPadding: 25
              bottomPadding: 25
              rightPadding: 25
              leftPadding: 25
              DropDown {
                     id: ddOption1
                     title: "Option 1"
                     verticalAlignment: VerticalAlignment.Center
                     horizontalAlignment: HorizontalAlignment.Center
                    Option {id: o1o1; text: "One"; }
                    Option {id: o1o2; text: "Two"; }
                    Option {id: o1o3; text: "Three"; selected: true; }
                    Option {id: o1o4; text: "Four"; }
  
                  onSelectedIndexChanged: {
  
                      switch (selectedIndex){
                          case 0:
                              //
                              console.log(" -->App: Option 1 Selector, On");
                              customInt = 0;
                              break;
                          case 1:
                              //
                              console.log(" -->App: Option 1 Selector, Off");
                              customInt = 1;;
                              break;
                          case 2:
                              //
                              console.log(" -->App: Option 1 Selector, Top (default)");
                              customInt = 2;
                              break;
                          case 3:
                              //
                              console.log(" -->App: Option 1 Selector, Bottom");
                              customInt = 3;
                              break;
                      }
                  }
              }
          } }
  

  I look forward to the the statement will change the level property NavPane, called customInt, but it doesn't.

  the output of the console shows that the ' App: Option 1 selector "gets selected in the dropdown list selected index changes, but the onCustomInt() funtion slot never gets called.

  I tried "mainNav.customInt = X" too, but the parameters cannot solve the mainNav.  I get "unknown symbol 'mainNav'" error with alittle bulb.

  what I am doing wrong?

  When you call the second page, SettingsPage.qml, set it as an object.

  Don't do the following:

  attachedObjects: [
  
      ComponentDefinition {
          id: settingsPageDefinition
          source: "SettingsPage.qml"
      }
  ]
  

  Follow these steps:

  attachedObjects: [
      // Definition of the second Page, used to dynamically create the Page above.
      ComponentDefinition {
          id: settingsPageDefinition
          Settingspage{
  
          }
      }
  ]
  

  Then the second page main navigation page in the IDE.  I had the same problem with a multi-page application, I created.

• ACCESS the same table in another file gives message as there is no...

  I'm working on a little game of shooting like a project to learn as3.

  I struggled a lot with the as3 syntax, but am willing to grit your teeth and hope that someday that light...

  the problem:

  I created three clips in a fla.

  I plugged 4 .as files to the fla:

  Bomber.As

  Bullet.As

  Kanon.As

  Shooter.As (connected to the phase of files / himself).

  All the behaviors of the mc are described in packages in their own connected .as file.

  I want to do a hitTestObject with "chips" and "bomber".

  
  

  as file f the ball inside, I make a table to store the bullets.

  
  

  When I want to access the same table in another .as file, I get a message there is no...

  
  

  Can anyone suggest a solution...?

  any help is very appreciated!

  If the bullet.as file is supposed to be for a ball, and you intend to have more than one ball in action at any given time, so you probably don't want this table in the class bullet.as in any case.  If the shooter file is the actual game file, then I have the file of shooting game in charge of the creation of new instances of the ball, and that is where I keep track of them in a table and their test against the bombers.

• How to access the variable in the child video clip

  I have a flash file that uses php to manipulate a database and returns a variable (data_xml) to document data in XML from the database. In this case, as well as others within the parent company. Now, I have a child movieclip that shows analyzed data, but I'm unable to access the variable from the child movieclip. The code associated with this is:

  var myXML:XML = new XML();
  var myXML = XML (event.currentTarget.root.data_xml);

  and I get the following two errors that point to the second line as the problem:

  1151: there is a conflict with definition myXML in the internal namespace.

  WARNING: 3596: duplicate variable definition.

  I unchecked automatically "declare instances of the scene" because I have seen the one proposed for the 1151: error, but I still have not the same two errors.

  Can anyone help? Thank you!

  You've declared the variable twice. Variable can be declared only once in any scope. So, your code should be:

  var myXML:XML = new XML();
  myXML = XML (event.currentTarget.root.data_xml); Note there is no before var

• To access the backups Time Machine another computer

  I have spent a good hour looking for a solution to this problem, but have developed empty-handed.

  If I understand correctly, backups of access from another Mac time Machine, I need to connect the backup drive to another Mac and select "Browse Other Time Machine disks... "in the Time Machine dock menu and choose the drive.

  The backup drive appeared as expected and I clicked on "Use selected Disk" to enter the time Machine.

  At this point, the computer between what seems to be Time machine, but shows a Finder window to the hard disk of the computer rather than the backup drive and shows not all dates before "today (now)."

  A thread has suggested that I open a Finder window and select 'Computer' in the menu to reach before the opening of time Machine. It did not work.

  Another thread has suggested that I have use the Migration Wizard rather to recover files and folders, I need. This is not ideal, but I tried it anyway, the result being that the Migration Wizard app remained "Looking for source...". "without finding the backup drive.

  Before formatting my drive on the original Mac, I had checked for if ensure that I could access the Time Machine backup while it was plugged into the backup drive (which he successful well).

  I use the latest version of El Capitan 10.11.6 on a MacBook Air (mid 2011). Backup is a MacBook Pro (mid-2010) who ran as El Capitan.

  I would appreciate any other suggestions!

  So, I discovered the solution, which has been in a simpler way that I expected. Before opening, Time Machine, it is necessary to find the sparsebundle Disk Image in the backup disk in the Finder and open it with "DiskImageMounter." Then, you must select "Computer" in the Finder menu reach before choosing the option "Browse Other Time Machine disks... "menu to the dock of time Machine. The first finder window it shows in the Time Machine view still belongs to the computer, but now it shows the previous backups, who are all from the backup drive!

• To access the EFS data from another disk using original certificates/keys

  I use EFS on a Workgroup XP - Pro, SP3 and have backed up keys.  I am trying to access the files on this disk now mounted in another machine (also SP3 of XP - Pro and in a working group).  I can load the certificates of the first machine in the second machine by double clicking it.  Once the certificates are loaded, how decipher you?  I get "Access denied" when I right click and try to decrypt the files on the original drive.  The MS help talk about designating a "File Recovery Agent", but this procedure seems to be to area of machines and gets a bit fuzzy for working groups.  BTW, I'm testing my file recovery process.  No data is at risk.  Can you tell me FAQ to decrypt a file on a disk that is moved to another machine using the original (REC & PFX files) encryption certificates/keys?

  Hello Stephen,

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Windows XP TechNet forums

• Access the value of an another file callback function

  I have a callback function, where to get the current value of a control in a main.c.

  GetCtrlVal (panelHandle, PANEL_RINGSLIDE_1, &p);
  

  I have another file (test.c) in the same folder. I need to use the value of & p in the file test.c. How is that possible?

  I have understood #include main.c in the file test.c but not working.

  Any ideas?

  In applications that use multiple source files, it is advisable to have a set of common definitions that covers all of your project. So, for example, you could have a "common.h" file, which is #include'd files test.c both your main.c. In this file common.h, you might have a statement:

  extern int p;

  This indicates to the compiler, for each of your steps in compilation of file c, the variable p is defined somewhere else and do not worry about this. Now, in a few of your .c files (not really matter which), you then have to declare the real variable p:

  int p;

  So now, when you reference an upside in one of your modules, you refer to the same variable across the whole project. (It is probably best to use a longer, more descriptive name for the variable instead of just p - this avoids possible confusion as your program grows in complexity).

  JR

• How to set the variable USERPROFILE of another user?

  I have the main account that I use and an admin account to call anytime, that I need (for security system). I recently came across problems with repartition my hard drive (it's a bit difficult to change the size of the partition between a basic volume and an extended volumes, even with a third-party utility that performs its work until Windows starts and wanted to completely pass the two user profiles (and preferably both program files)) (, but I can't even more with after discovering that most of my programs have themselves out of their expanded paths and not system variables linking the search through the registry) for the extended partition. I was trying to see if I could do that through a batch file (whose content I have so far for the non-admin will be shown below after this post), but I can't find anything in the registry that I could change. My question is twofold:

  1. I try to take the right path by using a batch script to move the two users? If I did do something wrong and if so, what?
  2. How could I put a variable user for another user on the same system? (It is a continuation of question 1)
  3. (Second question) Is it possible to move my programs Program Files/Program Files (x 86) runs on my D: drive and operate them out of that? I was also wanting to have just my system files and similar to run on my C: drive, because of the drastically limited space. The only exceptions to that would be the dozen of programs that are installed in the folder root (aka C:\whatever).

  I tried repartitioning earlier, because I wanted to make room for my C: drive D: drive much smaller to create many more. Here are the sizes of partition for each partition on my HARD drive:

  • 100 MB (OEM Partition)
  • 9.77 GB (recovery Partition)
  • 58,59 GB (C:, OS, 6,49 GB drive left... not enough for me to copy it to my iTunes songs about library 1 200 on it from my old netbook)
  • 229.63 GB (D: drive, too much for my tastes here)

  I wouldn't mind if I ended up having to save my D: drive format before that, but I don't know how useful it would be.

  Code for the batch file (I named it moveuser.bat)

  (the first line and the last two lines are to refuse to execute the batch file and DO NOT EXECUTE comments)

  GoTo EOF

  cmd

  title moveuser.bat

  MD C:\TEMP\cmdtmp

  MD "D:\From C\Users\" " " ".

  MD 'D:\From C\Program Files files.

  MD ' D:\From C\Program Files (x 86) \Common Files.

  CD C:\Users\Isiah

  Robocopy ".» "------" "D:\From C\Users\" /e /mt:2 /copyall /dcopy:t /tee /log:C:\TEMP\cmdtmp\tmp.txt ".

  set USERPROFILE = "D:\From C\Users\""" "

  CD appdata\local

  RD ' virtualStore\program files (x 86) \aura4you "/s /q

  CD C:\TEMP

  RD /s /q cmdtmp

  : EXPRESSIONS OF FOLKLORE

  REM 'DO NOT RUN. "

  Your system is too complicated. If you implement it then it'll keep you causing pain. Much better to keep things simple as follows:

  • Move the 'My pictures' folder on the D: drive.
  • Move the 'My music' folder on the D: drive.
  • Let your profiles on the C: drive.
  • Let the program files on drive C:, if only because many setup programs will create their files in "C:\Program Files (x 86)" instead of using the % ProgramFiles (x 86) % as they should.

  This approach will free a lot of space on the C: drive. It will also allow you to put your iTunes library on the D: drive.
  A few comments on your batch file:
  GoTo EOF

  cmd
  . . .
  : EXPRESSIONS OF FOLKLORE
  ': EOF ' is a built-in label that references at the end of the batch file. You jump to it as follows: goto: eof. Have a line of the form
  : EXPRESSIONS OF FOLKLORE
  interferes with the integrated label. Get rid of it!
  The "cmd" line is not necessary and will have unexpected side effects. Get rid of it.

• Access the variable in different class

  Hey guys,.

  So I make a program that generates circles where you click, and I want to apply some physics. I was thinking about creating a new class that contains all of the physical code and then apply to the circles that are created, which is the way to do it?

  I can't use the name of the variable of the circle in the physics class. And some stuff on the web that is said to make the variable public, and static, but I create the variable inside of a function, and it wont let me make public or static it. Even if I put it in the class, I get the same error (access from the circle of property not defined). Here is the code:

  ------------------------------------------------------------------------------------------ ----------------------------------------

  package {}

  import flash.display.Shape;

  import flash.events.MouseEvent;

  import flash.display.MovieClip;

  import flash.media.Sound;

  import flash.media.SoundChannel;

  Import fl.transitions.Tween;

  Fl.transitions.easing import. *;

  Import fl.transitions.TweenEvent;

  import flash.utils.Timer;

  import flash.events.TimerEvent;

  SerializableAttribute public class Main extends MovieClip

  {

  var pop: PopSound;

  var soundChannel:SoundChannel;

  var circleReady:Boolean = new Boolean;

  var coolDown:Timer;

  public void Main()

  {

  stage.addEventListener (MouseEvent.MOUSE_DOWN, mouse click);

  pop = new PopSound();

  soundChannel = new SoundChannel();

  circleReady = true;

  cooldown = new Timer (500, 1);

  }

  function mouseClick(e:MouseEvent):void

  {

  If (circleReady is true)

  {

  var theX:Number = mouseX;

  var they: number = mouseY;

  var circle: Shape = new Shape();

  circle.graphics.beginFill ((Math.random () * 0xFFFFFF), 1.0);

  circle.graphics.drawCircle (0, 0, ((Math.round (Math.random () * 40)) + 20));

  circle.graphics.endFill ();

  Circle.x = definition x;

  Circle.y = they.

  stage.addChild (circle);

  var xTween:Tween = new Tween (circle, "scaleX", Bounce.easeOut, 0, 1, 0.5, true);

  var yTween:Tween = new Tween (circle, "scaleY", Bounce.easeOut, 0, 1, 0.5, true);

  soundChannel = pop.play ();

  circleReady = false;

  coolDown.addEventListener (TimerEvent.TIMER_COMPLETE, timeDone);

  coolDown.start ();

  }

  function timeDone (e:TimerEvent): void

  {

  circleReady = true;

  }

  {

  }

  }

  }

  }

  ------------------------------------------------------------------------------------------ ----------------------------------------

  Any help would be great, thanks

  How can ensure me that the compiler finds Collision.as?

  According to the file format that you are using:

  1. . FLA: Collision.as must live in the same folder as the FLA

  2..XFL: Collision.as has to live at a higher level the. XFL file (on the same level as the folder with the same PREFIX as your xfl)

• Set the Variables in a separate timeline of problems

  Hi all

  I'm having a problem strange setting variables in video clips of another (relative chronology). I run the following code from the clip relative to the target child clips it contains.

  setVars = function (clip, value) {}

  clip.val1 = value;

  clip.val2 = 0;

  clip.onEnterFrame = function() {}

  trace ("work function");

  trace ("value 1 =" + val1);

  trace ("value 2 =" + val2);

  };

  }

  I am trying to set variables in a movie clip targeted by the argument of 'clip' setVars service but they are drawn as undefined. However, works of fine function. I have also tried to manually set the variables in the clip and am still not able to change outside the setVars function.

  What I'm doing wrong here? Any help would be greatly appreciated.

  use:

  setVars = function (clip, value) {}

  clip.val1 = value;

  clip.val2 = 0;

  clip.onEnterFrame = function() {}

  trace ("work function");

  trace ("value 1 =" + this.val1);

  trace ("value 2 =" + this.val2);

  };

  }

• How to access the variable script proc SQLplus?

  Lets start with the following SQLplus script:
  
  variable username varchar2 (100);
  Start select user in: user name of double; end;
  /
  
  print the user name;
  
  Select * from WHERE = owner all_tables "& username'"
  
  
  
  
  Issues related to the:
  
  Why do I get invited to enter a "/" when running the script in SQLplus? Even if I insert a / after the username 'impression' statement I am invited to enter an end delimiter.
  
  In addition, I would like to access the user name value in the following SELECT statement. However when I as code above the value of the variable is not taken. Instead, the user is prompted to enter a user name.
  
  No there is no way to 'transfer' of the value of the SQL user name?
  
  Peter

  You're confusing SQL * more variable substitution (those with '&') and bind variables.

  Replace the "& username" with: username as shown below:

  SQL> variable username varchar2(100);
  SQL> begin select user into :username from dual; end;
    2  /
  
  PL/SQL procedure successfully completed.
  
  SQL> print username;
  
  USERNAME
  ---------------------------------------------------------------------------
  SCOTT
  
  SQL> select * from all_tables WHERE owner=:username;
  

• to access the variables defined in the Document class

  I can't evaluate the values established in my document class.
  
  My document class: ZoneViewer.as:
  
  SerializableAttribute public class ZoneViewer extends Sprite {}
  private var zone_area_alpha_low:Number is. 2;
  }
  
  This code exists on a frame in a movieclip in my main script:
  
  This.zone_shape.Alpha = zone_area_alpha_low;
  
  
  How to access the valeur.2 which is declared in my class: document ZoneViewer.as? "zone_area_alpha_low" does not work.

  Solution to the problem of access to a variable value (zone_area_alpha_low) from actionscript code framework in a movieclip.

  FYI... my project file structure:

  Project_Folder/MyApplication.fla
  Project_Folder/MyApplication.swf
  Project_Folder/classes/ZoneViewer.as
  --------------------
  Document class: classes. ZoneViewer

  {classes package

  import flash.display.MovieClip;

  SerializableAttribute public class ZoneViewer extends MovieClip {}

  public static var zone_area_alpha_low:Number =. 1;
  }
  }
  --------------------
  This code exists on the first frame of my movieclip in my .fla file.

  import classes. ZoneViewer;< i="" was="" missing="" this="" import="" statement="" within="" my="">
  This.zone_shape.Alpha = ZoneViewer.zone_area_alpha_low;< this="" finally="" is="" referenced="">

  Kudos to ntbdy for the light. Is there better ways to do this?

• to access the variables and functions between external loaded SWF?

  Using AS 3.0: say I have a menu.swf which loads a content.swf below using the following
  
  var newContent:Loader = new Loader();
  newContent.load (new URLRequest ("fowContent.swf"));
  addChildAt(newContent,0);
  
  Now I have an image tag in newContent do it is an animation ending to this swf display. When you click another menu key in menu.swf, can I access sequence at the end of this content by:
  
  newContent.gotoAndPlay (newContent.endingSequence);
  
  Alternatively, you can use while loops in AS 3.0? I would like to have a Boolean variable "completed" in the newContent don't which evaluates to true after that end animation played.
  
  
  
  While (newContent.ended! = true)
  {
  wait
  }
  
  then to have it perform the function to load and display the new content.swf

  :

  PS you can not use a loop for and you can't use a while loop to perform any time. They both run from end to end before something is updated on stage and no other code can run outside of these loops (except if it is called from in the loop).

• How do I access the DW site on another computer

  I'm sure that this is possible, but don't know how!

  My laptop is currently being repaired to the Applestore - not open unfortunately.

  During this time, I want to access my site DW to make changes.

  Is it possible to download the remote file and enter the details of the site on another machine.

  Can if yes, please someone talke me as a novice through the SIMPLE procedure -

  Thank you

  Sure...

  1. open DW and choose Site > New

  2. give your site a name and create a folder to hold it in

  3. Enter your FTP info under remote server

  4. in the window of the files in your new blank site, click on the Get (down arrow) button, which will link DW to your site and you prompt to download the whole thing

  5. click on Yes, sit down, relax and wait for your site to download on your machine