Access to the BlackBerry through the USB port on the virtual machine VMWare

Similar Questions

• Remote access to the virtual machine from another computer?

  is it possible to access my virtual machine, I have on my desk from the local network on a Bill pro forma raspberry for example or this kind of a thing is not possible?

  VMware Workstation (or player) is needed on the source machine, i.e. one on which the virtual machine is running. Access to a properly configured VM trough the network is essentially the same as the access to a physical system.

  André

• Unable to start the CD player Win2003 Server / removable on the virtual machine: VMware-8(Host: Win7)

  

  Hello

  I am unable to start Win 2003 Server CD disk / removable on a Virtual Machine (the two VMWare 6 and 8). The snap-snap-in error is attached. I have the right configuration of the BIOS to Boot priority, but is taking the PXE ROM option.

  Please help me.

  Thank you

  Remy

  Hello

  1. it doesn't matter that the 'connected' is checked which is normal. "Connect at power on" is important and must be checked that it is on the screenshot.

  2. now, change the "autodetect" option to point to your 'real' cdrom device (that this laptop has).

  3 If this does not convert your cdrom ISO image 2003 and load through the second option that says "use an iso image.

  4. If this still does not work there is only one possible "your 2003 cdrom is NOT bootable. The fact that it autoruns IN Win7 does not mean that is bootable. You should check by placing it in a different machine of cdrom, restart this computer, bios in order to boot from CDROM/DVD first and see if the change boots. If it does not start even from there then for sure this cd is NOT bootable. So, the important thing is to load the cd on time to start and not inside the operating system to work.

  5. try to download an iso of the trial of the internet windows Server 2003 and use that one to see what is happening.

  6. create a new virtual machine and try here or even better to try another machine with Workstation 8 and see what happens.

  7. it is no coincidence if the CD-ROM drive is not recognized within the virtual machine.

• How to move the Virtual Machine VMWare Workstation 10 to a completely different computer

  I have a laptop that is going to become my 'old' laptop, I bought and am always set up a new computer.

  I have a VM THAT evolution created on the 'old' portable using VMWare Workstation 10.  I installed the software VMWare Workstation 10 on the new laptop computer and am ready to move to the existing VM development since the old laptop again to continue the development of software on the virtual machine to the new machine.

  I never moved a computer virtual from one computer to another, and I guess that all I have to do is to copy and move the folder and all its content from the old laptop to the new, and then I'll be back in business?

  Just make sure it is this simple before doing so.

  Thanks for any input.

  It's as simple as that. When you start in the new machine, it should ask if you copied or moved. Answer that you moved it will keep the same MAC address and you will not be able to connect the two copies at the same time. You copied it saying assigns a new MAC and they both can connect, but a Windows machine can ask to reactivate. Seems to me he asked also to reactivate when I copied it for an Intel system AMD system, but it was a long time ago

  Lou

• No internet access on the Virtual Machine

  Hey,.

  I have a problem, I don't have internet access on my virtual machine. I tried to install Ubuntu as an operating system invited to this topic, but I don't have an internet connection...

  [img] http://files.SA-MP.IM/uploads/c8cc2-1-E5.PNG [line]

  [img] http://files.SA-MP.IM/uploads/c8cc2-2-11.PNG [line]

  Is someone knows how to solve this problem to a solution?

  Thanks in advance!

  Jordy.

  Go to the network settings on the Ubuntu VM and configure IP address, subnet, default gateway, and DNS mask. Then you should have access to the internet.

• Access to the virtual machine on a server ESXi 3.5

  A great feature of VMware Workstation 8 is the ability to manage virtual machines on ESX and ESXi servers.

  I can access virtual machine on a VMware ESXi 4.1 server, but I'm unable to access the VM on a VMware ESXi 3.5 server.

  Is this a known limit or that I should add/install/configure anything in VMware Workstation 8?

  Concerning

  Marius

  Hello.

  vCenter or ESX (i) 4.1 or later version is needed for this feature.

  Good luck!

• Slow access to the virtual machine network (Windows 2008 Server 64-bit) Windows 7.

  Hello.

  I have a problem when you access files shared on a Windows 2008 Server 64 bits on a client computer to Windows 7. It takes a long time (up to a few minutes) to for example open a Word file from the network share. It is not always, but quite often.

  This also happens on two different servers client with almost the same equipment. Which is a basic IBM x 3400 with hard drives in RAID. I disabled the feature of unloading TCP/IP on the network inside the VM card.

  Someone has an answer for this? Have I missed something, a configuration perhaps? I'm totally lost here...

  Kind regards

  -Jean-

  Try this fix:

  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 982860

  Enrico Giacomin

• How P2V Solaris (SPARC) to the Virtual Machine VMware x 86?

  Good evening everyone,

  I would like to know is possible to convert a physical Solaris server is running on a Sparc, to a VMware VM on a processor a x 86 platform. Y of the tools out there that do exist and can accomplish this?

  Thank you

  Steve

  Oracle's Web site has a couple. I wrote an article great admin on how to create areas of high availability (the short name of containers) to http://www.sun.com/bigadmin/content/submitted/ha_containers_zfs.jsp. You can check out http://www.sun.com/software/solaris/containers/faqs.jsp which has links to a lot of Solaris container information including how servers solaris 8/9 p2v.

  One thing to note on this subject, is that if you create the flar on a SPARC box, you need to install the image on a SPARC box. (that is to say physical SPARC Solaris 8 needs to be installed on a SPARC Solaris 10 zones and Solaris 8 containers installed package server.) The containers are not cross platform compatible.

• is it possible to access the virtual machine when the network is down...

  Hello. He... IAM wondering is it possible that we can access the virtual machine when the network is down... (Because of power outages or when the fluctuations...) ................?

  Is it possible that I can configure my Virtual Machine...?

  Thank you and best regards...

  Indianmale...

  Hello

  Not really...

  For an environment hosted... If you can access the console of the host, you can always access the console of the virtual machine regardless of the State of the network outside of the console. VMware Workstation, Fusion and server all fall into this category.

  For ESXi/ESX... you need a host outside to access the console of the virtual machine. ESX and ESXi not displayed graphics or VMs of their consoles and management devices. So, you need an external machine that can run the vSphere Client or access to the virtual machine via RDP, VNC according to Guest OS involved or SSH.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009, Analyst of DABCC
  ====
  Author of the books ' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment ' available for pre-order now
  "VMWare ESX in the Enterprise Server: planning and securing virtualization servers, Copyright 2008 Pearson Education."
  SearchVMware Pro| Blue gears. Top virtualization security links| Security Round Table Podcast virtualization

• Monitoring VM - how to restart the virtual machine

  Hi all

  Hit a problem in our environment that can not be solved, but wanted to tender hand to people and see if they have found a way to replace.

  Currently have followed vm enabled in our cluster. Thing is watching us to restart the virtual machine VMware tools demonstrated to a status of "not running" - now, the key is to most of the definitions, the system is available in this case, can be crazy, RDP'ed etc, but we here again them restarted as he finally solves the issue we see (for example unable to connect via citrix for the machines in question)

  Duncan in the post below highlights in order to avoid false positives any i/o to storage/network activity will be verified after that heatbeats failed to "double check" there is a problem with the virtual machine

  Favorite VM monitoring (aka VM HA) - yellow bricks

  What I asked is it possible to replace verification of network storage/IO activity and then restart the virtual machine VMware tools on them stops as soon as?

  Many tx for all thoughts

  «.. . is there a way to replace check network activity of storage/IO and then restart the virtual machine of VMware tools on them stops as soon as...? »

  You can always use a supervision-process inside the virtual machine for this tool (perhaps more followed VM). It acts independently and allows much finer control, i.e. it can try first (re) start vm-tools before restarting. Same BSOD /-kernel panic can be dealt with by VM itself. It can actually be even more robust, not dependent on VMware infrastructure.

• 'Fail forward' for Ports on the virtual machine

  We have a customer who will be centralizing the unit with about 250 users at remote sites (4 Sites, 1000 Subscribers, they have currently a unit break at each site and want to centralize). Each site will have its own cluster of CM. I'm thinking about what I could do failure network SCOPE. Of course, each site will be fine IPT wise because they have their own cluster of CM, but VM will be declining. I think I watered but if there was a way to "transmit failure" or something on the VM ports on the PSTN to maintain the work of the virtual machine. (Of course carrier must support ISDB).

  Someone at - it works in this or thought about it?

  Andrew Dignan... If the carrier supports RDINS of course

  The connectivity of voice mail for Cisco CallManager chapter of the Cisco CallManager System Guide:

  "Inter-classes Interfaces A Cisco CallManager in a cluster can provide access to a voice mail system in another cluster, if the administrator provides the voicemail number on the trunk driver inter-classes. Voicemail systems can leave messages and sets the flags of message waiting for devices other clusters if clusters are connected by trunks QSIG. »

  This applies to any system of virtual machine. With the unit, you have of additional capacity to save ports across multiple clusters so to provide MWI without ICTS as QSIG.

  Hope this helps,

  Eric

• How to access the appservice parent of the virtual machine/machine component in a Multi environment?

  Hello

  I worked on a project of automation of the vra. In Orchestrator I have access to all the information for a particular component VM (for example, vCACVm, vCenterVm, virtualmachineEntity, vCACHost, vCACVmProperties objects) in the multi machine environment. But I have no information for the parent appservice (usually there will be a 'fake' vm as parent for multi machine environment).  For example, if I need to know the virutalmachineID of this parent 'VM' how to do it through vCAC API? I checked around and out to the desperate. Someone from http://dailyhypervisor.com/vrealize-automation-vcac-6-1-building-vco-workflows-for-multi-machine-blueprints/ says vCACEntity.getlink (vCACHost, "ChildVirutalMachines"), which seems the only link between parents and children vms. I certainly know that there should be an easy way to connect the machine virtual parent/child and go to the other, but how?

  Any response is appreciated!

  Concession of thank you for your response. It is the most common way that we tried. However, all properties we don't see anything pointing to the parent app "appservice' of a vm component. Last night I thought I found the answer. A property is shared between 'parent' and 'children': provisioningGroupID; It turns out that the name confusion is actually for "business group" for all the virtual machines belong to this group of companies will have the same value, not only the family of multi machine.

• Where Win7 stores the Windows Virtual PC > XP Mode > XPMUser "My Documents" to access if the virtual XP becomes inaccessible?

  Lost all files in XP mode is "My Docs" XPMUser because I can't connect? Same situation. Where Win7 stores the Windows Virtual PC > XP Mode > XPMUser "My Documents" to access if the virtual XP instance become inaccessible? Like many here, I have activated integration and where then asked for a password on the next reboot of the XP Mode. The password that I usually use has not been accepted. I tried all the possible solutions (have "integration" disabled, start with virtual XP safe mode), but not able to change my password XPmode so don't chance NO connection.  I have brand new instance of XP Mode works, but obviously does not have access to the CASE of XP Mode instance. My question is simple: where are the files that I created and saved in the default location of the first modes XP XPMUser "My Documents" in Windows 7? I tried Win7 for XP 'My documents' files by names or names of game but no luck.  Help, please.

  It is located in the file XP Mode VHD (Virtual Hard Drive), you can look as pretty as a ZIP file that contains a structure of entire disk rather than just a few files.  This VHD file is usually stored in your user folder in a folder of Virtual Machines, for example mine was in the C:\Users\SKeene\Virtual Machines.

  And it's my cheesy guilty pleasure wishes to inform you that you can browse this file as if it were a hard drive, without having to start the XP mode.  However, security applies: If your 'My documents' has been limited, it might be difficult to access (even if you pouvez be able to take possession of the file and gain access).
  Here's how:
  1. Open the Start Menu, right-click on computer and select manage. In the maintenance window of the computer that opens, choose "disk management".
  2. On the right side, click "More action" and then click "Attach VHD" and select your XP Mode VHD file.  You might consider making a backup of the file copy of the hard drive virtual before do you it, just in case!
  3. Once you have connected the virtual hard drive, an Autorun dialog box may appear.  If this is not the case, simply click on Start/computer to see your new 'Local disk '.

  At least, I can confirm that it worked perfectly for me, and I had access to my account "User XPMode" alongwith without problem.

• How the Virtual Machine port group communication?

  How the Virtual Machine port group communication?

  Port group is virtual aggregation of ports on vSwitch. A vSwitch can have multiple Port groups which separate the different network traffic. Port groups communicate with vSwitch, and we have physical network maps on vSwitch which establish communication with the external network. We can configure security, NIC teaming, traffic shapping nework political and at the level of the port groups. Once the port group is created, we can assign to vNIC

  How to establish communication?

  Public network > Switch L3 Core > ESXi physical adapter > vSwitch > groups > virtual NIC > Virtual Machine

  Virtual machine connect to the physical map using vNIC coming on Port groups. This is how it works.

• How to access the url outside of the virtual machine

  Hi all

  I am able to run everything on my VM machine.

  I can able to run URLs like 192.168.0.234:70001/console

  and so on.

  But when I try to access outside of the virtual machine, I am not able to. How to make

  This is the ip address that you use in the URL?