Slow access to the virtual machine network (Windows 2008 Server 64-bit) Windows 7.

Similar Questions

• Unable to add the virtual machine network services

  Hello:

  I already read that warning Virtual PC 2007 is not compatible with win 7-64.
  However, I read that it is "unofficially" possible launch.
  OK, I installed it and it worked except networking.
  Basically, I need to install the Virtual Machine Network Services.
  I right click on my network card-> properties-> install-> services-> virtual machine network services (VPC2007 folder: where I can see VMNetSrv.inf)
  Then says Windows: it is impossible to add the requested feature. The specified service has been marked for deletion.

  The problem is that I get this error even on WinXP SP3, so I think that there is something else wrong.

  And of course, Virtual PC 2007 available networks are only: no connection, Local, NAT.  (Missing my physical adapter)

  Thank you!!!

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  Hope this information is useful.

• Memory of the virtual machine in Windows 2008 32-bit Aignesberger.Software.website.Watcher.2010.busines

  Dear all,

  I installed the virtual machine with Windows 2008 32 Bit Standard Edition. Compact, his oar was 2 GB at this time there, everything was fine, I increased the ram to 4 GB. Now my Easerver 6.3.1 got crashed and pursuant to the original agreement we also reinstalled/reconfigured EA server, but it is always showing 2048 MB of memory instead of 4 GB.

  
  

  2554-11-08 13:09:17.733 INFO wire-34 after USER ID = Adeelme:cms
  Type of Message 2554-11-08 13:09:17.733 INFO wire-34 = Debug
  Virtual memory use Java ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO-2554-11-08 13:10:00.046: 19% (94/264/494 MB)
  Virtual memory use 2554-11-08 13:10:00.046 process of ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO: 98% (2016/2047 MB)
  Virtual memory use Java ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] 13:11:00.051 INFO-2554-11-08: 21% (104/264/494 MB)
  Virtual memory use 2554-11-08 13:11:00.051 process of ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO: 98% (2016/2047 MB)
  2554-11-08 13:11:15.000 INFO component/method name Thread-34 [JaguarServer] = n_app_controler/of_getapplication

  Type of Message 2554-11-08 13:11:18.631 INFO wire-34 = Debug
  Virtual memory use Java ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO-2554-11-08 13:12:00.052: 14% (74/264/494 MB)
  Virtual memory use 2554-11-08 13:12:00.052 process of ScheduledTask:Dump60SecondMemoryUsage [CheckMemoryUsageTask] INFO: 98% (2016/2047 MB)
  

  Thank you

  Adeel Imtiaz

  Yes - you can
  but that will make your VM very slow

  set
  prefvmx.minVmMemPct = "50".

  or less - allowing you to approve the RAM
  Set this parameter in your config.ini file

• Remote access to the virtual machine from another computer?

  is it possible to access my virtual machine, I have on my desk from the local network on a Bill pro forma raspberry for example or this kind of a thing is not possible?

  VMware Workstation (or player) is needed on the source machine, i.e. one on which the virtual machine is running. Access to a properly configured VM trough the network is essentially the same as the access to a physical system.

  André

• No internet access on the Virtual Machine

  Hey,.

  I have a problem, I don't have internet access on my virtual machine. I tried to install Ubuntu as an operating system invited to this topic, but I don't have an internet connection...

  [img] http://files.SA-MP.IM/uploads/c8cc2-1-E5.PNG [line]

  [img] http://files.SA-MP.IM/uploads/c8cc2-2-11.PNG [line]

  Is someone knows how to solve this problem to a solution?

  Thanks in advance!

  Jordy.

  Go to the network settings on the Ubuntu VM and configure IP address, subnet, default gateway, and DNS mask. Then you should have access to the internet.

• Restore the Virtual Machine from Windows 7

  I had set up a virtual computer on another partition on my drive (D:\VM) and my computer crashed and the computer scientist did a restore of the C: drive and I am not currently able to do the old VM to work. I have the following files listed under D:\VM

  License.NLF

  Windows XP Mode.vhd

  Windows XP Mode.vsv

  Windows XP Mode.vmc

  Windows XP Mode.vmc.vpcbackup

  Looks like the latest state of the virtual machine is on hypernation. How can I make my old VM to work? Need help!

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  Hope this information helps.

• create the virtual machine from windows NT 4 server with adaptec raid 5

  I have an old Dell (1998) server running windows NT 4.0 sp6a.  He had a raid 5 configuration using the controller raid adaptec SCSI 2940.  2 discs failed who broke the raid set.  I had a disk recovery company to recover the data and they have scratched off readers and gave me a SATA with all volumes.  I found a procedure to create a virtual hard disk (.vhd) and then converted to a hard and used to create a virtual machine in VMware workstation 7.  When I turn on the virtual machine, it begins the process of starting windows, shows the boot menu, select normal or mode VGA, goes through the process of NTdetect, display processor and memory but then gives a BSOD with the message inaccessible_boot_device.

  I changed the hard to affect the buslogic ddb.adaptertype, but it gave me the same problem.

  is there a different driver that I need for an adaptec raid controller or if the typical SCSI drivers should work?  If the typical SCSI drivers should work, so my problem might be in my Boot.ini because it shows that he is supposed to start on the partition (4) and this sata drive may not have scores exactly as they were on the raid configuration.  I tried to mount the volumes not in read-only mode, but the partition that I need to change the boot.ini file is partition (2) what mapping VMware won't let me open mode not readonly.  whenever I have, select it and it opens the partition (1) mode not readonly.

  I know this sounds complicated then I hope I described with precision.

  Hello
  I live in Germany, but my internal clock seems to be adapted to the New York Times.
  Very useful, because most repairs or recovery to the VMware is done the evening or at night.

• Change the amount of vCPU in vCD deletes the virtual machine network connection in vCenter

  
  It is a problem of crazy that we discovered, and I wanted to know if anyone had seen him.

  First of all, we miss the following software versions:

  vCD: 5.1.1.867405

  vCenter: 5.0.0 Build 913577

  ESXi: 5.0.0 build 1024429

  If you go to vCloud Director and change the material properties of an existing virtual machine (Powered off) any change in the amount of vCPU (to something new), inside of vCenter status of the network will change to the port group Standard (inactive) none.

  
  Even if, before making the change, the virtual machine is connected to a distributed port group, and works well.

  We now display an SR to VMware, but sometimes it is worth running this by the community to see if other people have already seen or indeed want to test on their deployment.

  
  Thanks in advance

  We have solved the problem now.

  The reason why that we faced this problem is because we used the wrong order in the API.

  You must ensure that you use the undeploy command when you work with the vCD API otherwise you end up with a disconnected network card.

• Could not open the Virtual Machine: get Windows XP line 1: syntax error

  The VMware Fusion team:

  I impatiently force them to leave my MacBook Pro as my virtual machine was frozen... as a result, whenever I try and open my VM, I get this error: http://img.Skitch.com/20100316-bdpjryuqdskw8831i8j56iyqs1.jpg .

  I restart and no improvement.

  Tips, thoughts, suggestions? Thanks a lot for your help.

  I do not have the fainest idea why you're engaging again the truncated .vmx file of origin that you posted first however back a review what I said.  The line at the bottom is the .vmx file that I have attached to my last answer should be used to replace your computer in the Virtual Machine "s as package but the Virtual Machine must be stopped, not suspended and merger closed when you replace the truncated by a good I have attached.»  I can't do it, is more obvious or simple then I already have!

• VirtualCenter is necessary to put in place the virtual machine on an ESX Server?

  Hello! I'm new to VMWare and and I'm trying to implement some virtualized servers. I have a machine I want to run a virtual machine with Windows Server 2008 and a virtual machine with Arch Linux. I have a copy of vSphere 4.0 and ESX Server operating system linux installed correctly on the server computer. I tried to use the Infrastructure Client from my desktop Windows 7 Professional to create the new virtual machine, but I get to the part 'Select the data store' in the wizard and shows me that I have not created from data stores. I have not found a way to create databases in client infrastructure, and most things on the internet speak do with VirtualCenter.

  I tried to install the VirtualCenter on Windows 7 server, and initially, I got the error when he could not find the ADAM directory. Then I installed the version of Windows 7 to ADAM, ADLDS, who created c:\Windows\Adam and seemed to be backward compatible enough to allow installation to get a little further, how it failed and said that he was unable to create an instance of directory services.

  I fought this thing and Googling all the problems that I ran now for more than 48 hours. I was hoping that since I don't have more than one physical server to manage, and I don't have a dedicated machine which can be VirtualCenter Server all the time anyway (my office is dualbooted with linux, where I spend most of my time), it would be possible to do without.

  Any help appreciated,

  Matt

  Hi and welcome to the forum,

  you don t need a vCenter if you have a single server. You can use the vSphere Client to manage the server.

  If I understand you, you have already installed the ESX Server and a local data store.

  Now you can download the vSphere Client by opening the Web page of your ESX Server. Type http://<> address >

  Install the Client and you are able to create Virtual Machines.

  You can also use the ESXi Version.

  But I recommend you read some VMware papers like this

  http://www.VMware.com/PDF/vSphere4/r40_u1/vsp_40_u1_esxi_i_get_start.PDF

  Frank

• Could not open the virtual machine after Windows blue screen

  I updated my machine Windows 8, he projected blue, now I can't open my VM that I had open at the time of the blue screen.

  This is the message that I received from VMware Workstation 10 attached.

  Search for files of *.lck in virtual machine directory - delete them all.
  Also delete the directories named *.lck

  Then try again - if it still does not need more details

• Access to the virtual machine on a server ESXi 3.5

  A great feature of VMware Workstation 8 is the ability to manage virtual machines on ESX and ESXi servers.

  I can access virtual machine on a VMware ESXi 4.1 server, but I'm unable to access the VM on a VMware ESXi 3.5 server.

  Is this a known limit or that I should add/install/configure anything in VMware Workstation 8?

  Concerning

  Marius

  Hello.

  vCenter or ESX (i) 4.1 or later version is needed for this feature.

  Good luck!

• List of the types of all the virtual machines network cards

  How can I view maps of different types of all VMs in a row, without taking change them the settings for each virtual machine.

  Aneesh

  Hello

  It is possible via power cli...

  http://communities.VMware.com/message/2013514

  Thank you

  SA

• VMWarer Image cannot start the Virtual Machine in Windows 7

  Hello

  Receive a machine with disc encryption HARD full of checkpoint on it. I had successfully converted to a virtual machine Image, unfortunately every time tried to start gives me BSOD.

  Tried to fix it, tried to return to the image, but the same results.

  There were no errors during the conversion. complete cleaning.

  Someone at - it suggestions?

  How did you convert the image in a virtual machine?
  have you changed the type of Adapter LSI - SAS during conversion?

• If I install the Virtual Machine on Windows 7 Ultimate can I run Windows 98SE on it?

  I have some old programs that I want to use and which are not compatible with Windows 7.

  See http://support.microsoft.com/kb/831461 and https://www.virtualbox.org/wiki/VBox_vs_Others.

  Note that Windows Virtual PC does not support versions of Windows prior to XP version.