Access to the data of dehydration store

Similar Questions

• No access to the data of a partition of a disk

  Windows Vista automatically starts the repair of my D: drive. Many errors have been reported and fixed.

  I now see the D: drive in the Windows Explorer, but no access to the data on D: is possible. The bar that shows the used/free space is not shown. A second partition on the hard drive works fine.

  In disk management I find D: drive with all the information on the used/free space, no error is reported.

  No idea how to fix?

  Any help is cordial welcome.

  Your machine to HD will have a free test bootable utility, for example WD SeaTools

• The results of F1-QUERY-how to restrict or to SQL with the role of access to the data?

  Hello
  
  With the help of CC & B 2.3.1.
  
  I'm configuration of a Zone of F1-OF-QUERY to get and display customer information as level account; the filter criteria will be Geo val SP.
  
  With our application, we use access to accounts and groups access to the data on users roles to restrict access to sensitive accounts, such as VIP.
  
  What keywords should I use in the SQL statement to limit the results only for group accounts to which access is included in the Dar of the user?
  
  Example: If the user has DAR 'STANDARD', it won't see accounts with group access 'VIP '.
  
  I tried unsucessfully: USER: USER ID,: USER_ID.
  
  Unsucessfull example:
  
  Select dar_cd, user_id, expire_dt
  of ci_dar_usr
  Where user_id =: USER_ID
  and expire_dt > =: F1
  
  Thks,
  
  Fabien

  Hi, Fabien,

  If you are looking to determine the current user in the box,
  the keyword to use is: USERID

  You can check the zone of F1 "F1-FAVSCR" for its use.

• Get-view FileManager = vCenter only? How to interact with the data without her store?

  Hello

  I am trying to create a folder directly on a data store and copy a vmx file.  What I've read I need to use Get-file manager mode, but this seems to be only available on vCenter.

  Is there anyway to interact with the data using PowerCLI store when it connects directly to a box of ESX?

  Thanks for your help,

  KeV

  The shortcut notation

  Get-View FileManager
  

  is not available when connected to an ESX host.

  But you can get the object as follows

  Get-View (Get-View ServiceInstance).Content.FileManager
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Access to the data in dynamic queries in a stored Proc

  Hello
  I have a stored proc that gets select statements in a database table. These instructions must be carried out and the results to the format in HTML and sent by e-mail to a set of email addresses. The bits of HTML and e-mail are not a problem. I can also run the instructions using a sys_refcursor, but how do I do the following:
  (1) determine the column names and the number of columns returned by select statements?
  2) access to the data for each column of each row?
  Since I know not the number and data types of the columns I can't use the standard INTO.
  We use 10g.
  Thank you
  Johan

  Dbms_sql package to create the cursor. Here you can describe the sql statement columns dynamically.

  Visit this link for examples...
  http://www.MCS.csueastbay.edu/support/Oracle/doc/10.2/AppDev.102/b14258/d_sql.htm#i1026120

  Ravi Kumar

  Published by: ravikumar.sv on August 12, 2009 17:34

• Can't do multiple hosts access to the data of the other local host store

  Hello!

  I'm faced with a problem I have no idea how I can solve it. I have a cluster of ESXi 5.1.0 799733 with 3 guests and a shared iSCSI storage. I do vMotion well, as my VM files are stored in the storage. These 3 hosts are managed my vCenter 5.1.0.5300 build 947940.

  Now, I would have a few virtual machines on the local storage of the host cause some performance issues, and so I would like to make Storage vMotion. In addition, Storage vMotion is allowed to my cluster.

  I know that each host needs to access the storage time origin and target to make Storage vMotion. I also know that 5 VMFS is a cluster file system.  Search this documentation [1], it says that I must use in the web client of vSphere (I prefer to use vSphere client), the data store and click the "mount a store of data to some hosts. But there is no icon!

  I also tried clicking 'Add storage' on vSphere Client GUI, by selecting "VMFS", without success.

  Attached to this post is my cluster infrastructure. The DS_LOCAL_ * are storehouses of data space and DS_SAN_ * are SAN datastore.

  Where mess me things up? Help, tip or documentation pointing will be nice.

  Many thanks for any help

  Lucas

  [1] VMware vSphere 5.1

  You can not access local data warehouses of other armies. However, with vSphere VMware 5.1 introduced a new VMotion feature, which allows you to migrate virtual machines without shared storage "(hôte de changement et magasin de données»)." However, this feature is available on the Web Client.

  André

• Accessibility of the data store

  I need determine if a given data store is accessed from ESX

  hosts.  I noticed that the MO data store has a property named

  accessible.  However, in my tests, even when I take the data store down

  (it was a test NFS data store and I just close the NFS host), the

  accessible property always return true.

  Does anyone know how to determine when / if a given data store is no longer accessible by an ESX host?

  Thank you very much in advance for your help.

  -Moby

  Did you call UpdsateViewData after you turned off the NFS server?

  $ds = Get-Datastore  | Get-View
  ....
  # NFS server powered off
  $ds.UpdateViewData()
  ....
  

  Note that in PowerCLI 4.1, you have access to the MO via the ExtensionData property.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• iptables, limit of carrots, upload the data... store in esxi 4.1

  I would like to run a machine virtual single windows 2008 hypervisor free vsphere 4.1.

  The sole purpose is to use iptables to filter all traffic to the esxi host and the windows prompt. I haven't needed the features of virtualization fancy, I just need to protect a windows with a little expensive but powerful Firewall Setup, and although virtualization might do the trick. I already tried with xitrix xenserver and found several problems... It is now time to vmware

  The windows prompt will run game servers, so it is important that no jitter and (almost) no delay is introduced into the network. I also prefer to avoid validation CPU and RAM resources for a second virtual machine if it was not strictly necessary.

  That's why I prefer to do all filtering with iptables on the level of the host layer and not in a linux host. In my view, it is possible to enable SSH on the host computer and play with iptables, I guess on the ENTRY (to protect the host) and FORWARD (to protect the guests) channels. Well, I guess it's safe enough to do so, provided that no network no associated settings will be affected in vsphere after that?

  I don't know which are the limits of the free vsphere hypervisor edition. On a Xeon W3520 (4 cores + 4 hyper threading), I'll be able to use all 8 cores in the guest windows 2008 standard system (affecting multiple cores per processor as explained here, to avoid to reach the 4 plugs windows limited)?

  What are my options to download the file .iso windows image in the data store? Last time I looked the vsphere client, I could upload it only on my local hard drive and wget was not available in SSH (command not found). My crappy DSL download speed of 384 Kbps, this is not a viable option. The box is headless and located in a remote data center. I have esxi installed via the automated installer netboot provided by the farm, which formats the two hard drives.

  I guess I could get an answer to most of these questions by just trying, but unfortunately, the checkbox I able to run esxi is this one, and it's a box of production... so before I do that I need to document myself to be able to work quickly and with as few surprises as possible.

  Thank you

  Hello crossed.

  Welcome to the forums.

  There are no firewall in ESXi. See here: http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1026845 .

  There's no other way than to use a virtual machine to filter access to the virtual machines and the management network.

  Run a virtual machine with 8 vCPUs, to Enterprise Plus license. And it is not recommended to give all the processor cores to a virtual machine, that host a. vSphere need CPU resources to run the client. If your guest consumes all CPU resources, your host will not be able to handle comments properly.

  To load an Iso file on a data store, you can also use WinSCP or FastSCP.

  Good luck.

  Concerning

  Franck

• Satellite M70: access to the data of temperature and fan

  While we did not have these problems with other laptops, we found a way to access the data of temperature and fan on a Satellite M70.

  A friend has tried this on Linux but have failed and also with XP I do not find a way to read data (current temperature of the CPU, or State of the fan-cooler).

  Given that I noticed several irregularities when using (the fan is that the CPU load is very minimal), work sometimes is going to be a little uncomfortable.

  Thanks for the advice / gw

  I put t know if it will help you, but in this ad, someone managed to run a control application of the material.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14284

  Maybe it will work on your laptop.
  But to my knowledge Toshiba doesn't support this request and I'm not sure it will work.
  Anyway, try it's free ;)

• No access to the data in a database linked when calling procedures in the APEX 5

  Hello

  I use

  • APEX 5.0.3
  • APEX DB: Oracle DB 12 c
  • DB related: Oracle DB 11 g

  When you call procedures and packages of APEX-side on the related DB, I can't access the data with a "select...". "in the tables on the DB related.

  Is it because of the different versions of DB?

  Is there a general setting in my APEX 5.0.3 I need to access the data in the tables on the DB related?

  Any help appreciated.

  Thanks in advance.

  Concerning

  Norbert

  Hello

  Thanks for the reply.

  But at least we do the upgrade again.

  ... when editing a dblink and recompile the schema it all works.

  Concerning

  Norbert

• How my new users access to the data in the database?

  Hello

  I created a database with new users who will need to access the database, but as soon as I connect to one of the new users can't access tables or any of the data that I had inserted previously.

  Any help would be greatly apprciated!

  Thank you

  Rory

  (Running Oracle 11 g)

  As connect you to the database by default, you can only access your objects or object that you access directly by prefixing its owner. In your case, not only you must give the user but also needs prefix synonym/owner access rights to access these objects. for example

  user that has (you) have following things:

  EMP (grant select on emp to UserB ;)

  Dept (grant select on dept to UserB ;)

  User B

  Select * from UserA.emp;

  Select * from UserA.dept;

• Clone a model in a specific folder on the data, with powercli store?

  I'm deploying approximately 135 VM from an unique model using powercli from a CSV file.

  Each line in the CSV file has a connection, course section instructor

  For example...

  Login Section instructor

  123456 5555 Foo EE123

  Here is the script

  SE connect-VIServer-Server 10.0.0.60 - Credential (Get-Credential)
  $Users = import-Csv c:\CSV\Data.csv
  {foreach ($User in $Users)
  $Login = $User.Login
  $Course = $User.Course
  $Section = $User.Section
  $Instructor = $User.Instructor
  $ResPool = $User.Section + "" + $User.Instructor
  New-VM - VMHost 10.0.0.10 - name $Login - ResourcePool "$ResPool" - model 'VM-model' - data store "datastore1".
  write "$Login Created" | Out-file "log.txt" - append
  }
  Disconnect-VIServer-Server 10.0.0.60 - confirm: $false

  I'm doing the data store a little cleaner when I deploy these machines and put all the machines in a folder located in the data store, for example. datastore1\spring2013\EE123\ (in reality would have $Course instead of EE123)

  Can someone help me with this.

  
  Thanks in advance

  Yes, you can use the ResourcePool parameter on the New - VM cmdlet to do this.

  But since you have resourcepools with the same name in the tree, you must be sure to only select the right pair.

  You use the location setting to indicate which branch of the tree you want.

  For example:

  $rpRoot = get-ResourcePoo-name 'Sprint 2013"

  $rpCourse = get-ResourcePoo-name 'Foo 5555"- location $rpRoot

  $rpServers = get-ResourcePoo-name "servers" - location $rpCourse

  $rpStudents = get-ResourcePoo-name 'students' - location $rpCourse

  New-VM-name--ResourcePool $rpStudents

  You can create this logic in a loop and use the name of a CSV file example

• Questions about the data reporting PowerCLI store

  Hello

  I have a problem with a script that I use and I'm looking for an idea on the problem.

  I have a script that gathers pretty much all the information on the virtual machine in my cluster. (Disk size, free disc, data store).

  Most of the time, it works very well. But there is something that bothers me little. It doesn't report the data store that each VM is linked to. It works for most, but on a select few, it's not.

  I wonder if there is something in my script which is the first cause, or if it is a question of VSphere.
  
  My script and the output is attached.
  
  Thanks in advance for the help.
  
  -Aaron

  I was able to get the warehouses of missing data as well.

  That's when the VMDK are stored on more than 1 data store for a specific virtual machine.

  In this case, the line

      $myDS = Get-Datastore | Where { $_.Id -eq $VM.Datastore}
  

  nothing will store in $myDS because $VM. Data store is an array of MoRefs.

  In fact you try to map the partitions in the guest OS with data warehouses that host the VMDK files.

  There is no easy solution for that I fear (there are number of threads in this community who are trying to do the same thing).

  I fear that there is no real solution for this problem

• Access to the data after the managed service VOImpl in bean method call

  I use JDeveloper 11.1.2.4.

  I created a method to Interface customer and he calls you a managed bean.

  The method is exposed in the control of data and I have a links to it through links on the page.

  The method runs just a view of criteria for a row of data in the database.

  But, because the method does not have a return value, how could access the View object data.

  Here's the Service method and the method of the bean management;

  The service method: in PersonVOImpl.java - should result in 1 row:

  public void getPersonByCnViewCriteria (String cn)

  {

  ViewCriteria viewCriteria = this.getViewCriteria ("PersonVOCriteriaByCn");

  Reset a display criteria of values that may was resolved at design time

  viewCriteria.resetCriteria ();

  this.setCnBind (cn);

  this.applyViewCriteria (viewCriteria);

  this.executeQuery ();

  }

  Method in managed Bean: I have a linking operation method to access the Service method.

  
  

  It seems that the Service method is executed successfully.  But, how to access the data after the call?
  

  
  

  protected void getPersonByCn (String cn)

  {

  BindingContainer bindingContainer = this.getBindings ();

  OperationBinding operationBinding = bindingContainer.getOperationBinding("getPersonByCn");

  Map operationsParamsMap = operationBinding.getParamsMap ();

  operationsParamsMap.put (WorkFlowBean.PROPERTY_CN, NC);

  Object result = operationBinding.execute ();

  If (! operationBinding.getErrors () .isEmpty ())

  {

  }

  
  

      // How to access data after the call?
  

  }

  You should never use a class VOImpl or VORowImpl in a managed bean. If you have to use them, create Interfaces and use.

  I'm not too sure if it's good to return a view in a method object.

• Assign access to the data form

  Hello
  
  If a user is allowed to access a particular data form, is required to update the database by selecting the filter option of security in data base management?
  
  In fact, I gave a write access to a user to a data form, but it can not display it and get a msg of error about security filters.
  
  Thank you.

  Good enough (even though technically you don't need updating if only access to the planning of the forms, but it is always advisable to update the filters as might be to access data using other methods for example excellent addin)

  See you soon

  John
  http://John-Goodwin.blogspot.com/