Access to the elements of an array passed as object reference

Hi all!

I am quite new to TestStand and therefore, my question might be simple enough but I was not able to find the solution by looking at previous posts.

I have a sequence that passes a custom array (of data type) to another to make basic on the table stuff (reverse the order of the elements, for example).

I want to move to the sequence called an object table reference

The problem is that I am not able to read the array element inside the sequence called using the object reference.

I found the way get the number of items, but I'm not able to access the item

In addition, the TestStand GUI is able to let me see the array pointed to by the object reference that is passed within the known sequence, so it is possible to access... but how?

I want to do operations on the object reference passed within a 'No return' TestStand if possible.

Thank you very much.

Andrea

In other words:

How do I access the field 'temperatureTag' item number '0' from the object variable reference referenceToClone?

Locals.referenceToClone [0] .temperatureTag does not work...

I don't know what is the recommended method to solve your problem. When you try to few alternatives, I was able to get the value required by the following expression (tested with TestStand 2014):

Locals.referenceToClone.GetPropertyObject("[0]",_0).temperatureTag

Try and tell me if it works for you.

Use this workaround with caution.

-Shashidhar

Tags: NI Software

Similar Questions

  • How to replace (assign) a part of the elements of an array in TestStand?

    Hello

    I would like to replace or assign values to the elements of an array.

    For example, I have a local variable with 6 elements, Locals.A = {1, 2, 3, 4, 5, 6},

    and I would do it is {1, 2, 13, 14, 5, 6}.

    Accordingly, I add an expression and write "Locals.A [2.3] = {13: 14}", but it failed.

    Is it possible to replace a part of a painting?

    My real question is I want to pass parameters to a sequence to a local variable of the MainSequence, like the picture as an attachment.

    I hope that I can assign the parameter (table 5 elements) for the range of 5th to 9th item of the local Variable.

    Could someone give me any suggestions? Thank you very much!

    (1) I meant move the entire table and in the subsequence programmatically update only a subset of the items.

    For 1 or 2, you'd have to write a loop as interates on and updates the items that you are interested in. There is no simple syntax that will do what you want. You can use a loop but, rather than make a statement of entitlement for each item.

    -Doug

  • How to extract the value of the element as an array in javascript

    Hi all

    I want to do some calculations on the value entered by the user in the textfield of a tabular presentation, how can I retrieve the value of the element as an array in javascript?

    I use as a normal, do not use in the form of apex_item.

    I can pass the current value of the textfield to the function using 'this' as a parameter, but how can I retrieve the value of other lines of the same column?

    Thank you
    Tauceef

    If it is a page element wouldn't be better to make a calculation of point page when onload of the page? Just do a SQL as select sum (col1) of dual nationality or whatever is your table/column?

  • multiplying the elements of an array with their index

    How can I multiply the elements of an array with their index values.

    Thanks in advance.

    Hi aksoy,.

    Multiply the elements with their index:

  • Combing of the elements of an array into a single string

    Hello world

    I would like to combine all the elements of an array into a single string. For example, I have a table of 5 elements in the chain

    A

    B

    C

    D

    E

    I want to merge all the elements of a unique string of ABCDE.

    I tried to use the 'Worksheet picture String' function but the tabs separating caused me a problem even if I removed the by ' search string and replace.

    Thanks in advance for your help.

  • Error #1009: cannot access a property or a method of a null object reference

    I tried to add an event listener for the stage, but it still does not work. I have moved things and does not work either. It is 02:30 in the morning here and didn't sleep until I get this tri - could someone take pity please?

    Error #1009: cannot access a property or a method of a null object reference

    at GameSunnyFly()

    Also it keep telling me that I had a low problem - it is highlighted in black as well.

    package

    {

    import flash.display.MovieClip;

    import flash.display.MovieClip;

    import flash.media.Sound;

    import flash.events.Event;

    import flash.ui.Mouse;

    import flash.events.MouseEvent;

    import fl.transitions.Tween;

    import fl.transitions.TweenEvent;

    fl.transitions.easing import. *;

    import flash.geom.Point;

    import flash.utils.Timer;

    import flash.events.TimerEvent;

    import flash.utils.getDefinitionByName; Join mcs library

    import proyectos.trivia.TriviaEvent;

    import flash.media.SoundMixer;

    /**

    * ...

    * @author...

    */

    /public class GameSunnyFly extends MovieClip {}

    private var v: Number = 8;

    varObject:String private var;

    i: Number private var;

    arrayObjects:Array private var;

    soundsArray:Array private var;

    soundClip:Sound private var;

    randomnumber:Number private var;

    contadorHits:uint private var;

    private var notTweening:Boolean = true;

    tweenedObject:MovieClip private var;

    tiempoTotal:uint private var;

    tiempoTimer:Timer private var;

    clickPoint:Point private var;

    public void GameSunnyFly() {}

    this.i = 1; -You forgot to initialize I to your table

    this.setObjects ();

    this.setSounds ();

    this.clickPoint = new focus();

    this.varObject = arrayObjects [i-1];

    this.addEventListener (Event.ADDED_TO_STAGE, this.onAddedToStage);

    }

    private function setObjects (): void {}

    var numOfObjects:Number = 5;

    var arrayObjects:Array = new Array();

    for (var i: int = 1; i < = numOfObjects; i ++)

    {

    var ClassRef: Class = getDefinitionByName ("ObjectClass" + i) as class;

    var objInst:Object = new ClassRef();

    objInst.x = i * 100;

    objInst.y = i * 100;

    objInst.scale =. 20;

    objInst.scale =. 20;

    this.arrayObjects = ["one", "two", "three", "four", "five"];

    arrayObjects.push (objInst);

    this.addChild(arrayObjects[arrayObjects.length-1]);

    }

    }

    function onAddedToStage(e:Event) {}

    this.stage.addEventListener (MouseEvent.MOUSE_MOVE, this.myClickReaction);

    this.stage.addEventListener (Event.ENTER_FRAME, this.onEnterFrameThis);

    }

    public void getXMLName(nombre:String) {/ / necessary for a swf continaer read this because it is a document class}

    trace ("game2SunnyFlying", number);

    }

    private void setSounds () {}

    var numOfSounds:Number = 5;

    var soundsArray:Array = new Array();

    for (var i: int = 1; i < = numOfSounds; i ++)

    {

    var ClassRef: Class = getDefinitionByName ("SoundClass" + i) as class;

    var objInst:Object = new ClassRef();

    soundsArray.push (objInst);

    / / this.addChild(soundsArray[soundsArray.length-1]);   addChild is to DISPLAY so no sounds

    }

    }

    function myClickReaction(e:MouseEvent):void {}

    this.clickPoint.x = this.mouseX;

    this.clickPoint.y = this.mouseY;

    }

    private void onEnterFrameThis(event:Event):void {}

    varObject = this.arrayObjects [i-1];

    this .x-= [varObject] 5.

    If (this [varObject] .x <-10) { }

    this .x = this.stage.stageWidth [varObject] + 20;

    }

    += this.hero.x (clickPoint.x-this.hero.x)/v;

    += this.hero.y (clickPoint.y-this.hero.y)/v;

    {if(this.varObject!=null)}

    if (this.hero.hitTestObject (this [varObject])) {}

    ++ this.contadorHits;

    this.spin ();

    trace (varObject);

    }

    }

    }

    Click file/publish settings/flash and check "permit debugging".  Repeat the test.

    the line of problematic code will be mentioned in the error message.  copy and paste the full error message and highlight the line of problematic code.

  • How to find feel it between the elements in an array

    Hi guys,.

    It is easy for you probs, but how can you find the diffence between all elements in an array?

    for example array = 1 2 3 4 5 6

    so difference between 1 and 2 is 1, the difference between 1 and 3 is 2. all the way to the hollow of the differece between 6 and x is x etc.

    I tried using shift registers, but just can't get enough.

    Thank you

    No need for the outer loop.

  • How can I view all the elements of an array?

    Hello

    I'm learning about the handling of tables.  The example finder includes this one, 'build array_forum.vi', which shows the two modes, concatenate and adding, I understand, HOWEVER, I can't understand how they built this vi.  For example, I can find the Array function to build, but I do not understand how they created the "digital data table 1" "data table 2" digital... etc, and I can't find the functions on the pallets that cause display "build the CONCATENATE entries table". ".  Where are these blue functions?

    Where these functions are found in the palette, and how we build them like that?

    The other vi indicated here, 'for loop array_forum.vi' is my attempt to reproduce, but it doesn't show all the elements of the array; However, it only displays a SINGLE element, the last element of the array.  How can I view all the items in the table I am creating using the FOR LOOP?

    Thank you

    Dave

    I think I posted this in the wrong place.  I reposted it on the forum of Labview.

    Dave

  • Delete, collapse, the elements in double Array

    If a table has 1 d of elements in double, how can I get rid of the duplicate items?

    Here is my input array: A A A A A B B B C C C D D E E E E E G

    This is the desired output array: A B C D E G

    Note that the output array contains not empty elements. There only 6 items.

    Basically, you just scroll the element of a table at a time and do ' if the element is equal to the previous one, don't know it... If the item is not equal previous, keep him. "

  • Access to the element in a dynamic PL/SQL trigger Action?

    Hello

    I have a form that is used to calculate the volume of a (large) number of tanks based on the heights of tank is entered.

    I have a PL/SQL procedure that performs the calculation: it receives the name of the tank and the height and calculates the volume (each tank may have different physical characteristics).

    I didn't create a dynamic Action by tank (I'm lazy and the number of tanks is important!). I currently have a dynamic Action that is triggered whenever one of the heights of the tank on the form changes. The PL/SQL action called the calculation for each tank. FOR EXAMPLE

    :P1_TANK1_VOL := tank.vol('TANK1', :P1_TANK1_HEIGHT);
:P1_TANK2_VOL := tank.vol('TANK2', :P1_TANK2_HEIGHT);
...
:P1_TANK50_VOL := tank.vol('TANK50', :P1_TANK50_HEIGHT);

    This works, but is to perform calculations of 50 whenever one is necessary, and can seem slow.

    Is there a way to identify the trigger for the action of PL/SQL? FOR EXAMPLE

    IF TriggeringElement = 'P1_TANK1_HEIGHT' THEN
:P1_TANK1_VOL := tank.vol('TANK1',:P1_TANK1_HEIGHT);
END IF;

    Any ideas?

    No PL/SQL directly. You could do a JavaScript action before your PL/SQL and write the id (which is the name of the element in the APEX), the item trigger in a hidden item, submit it to your PL/SQL action and now you know how it started.

    Kind regards

    Joni

  • Width of the element in an array

    Dears

    How can I limit length tabular data or detailed form. (same width of the element in the form of master). I use APEX 3.2.

    Can someone tell me the solution. Thanks in advance.

    Concerning
    Kamran

    Hello

    Same Apex lib is great, I think that TI exaggeration if you like only limits length max.

    Script for HTML page header

    


    And Page HTML Body Attribute

    onload="setTextMaxlength('f02',20)"

    Where "f02" is your form item name and 20 is max length you like set

Regards,
Jari

Edited by: jarola on Dec 6, 2010 3:29 PM

  • #1009: cannot access a property or a method of a null object reference.

    Hello

    I have some problems understanding there I get this error, here is my code for the inclinometer of the site menu:

    Manage menu btns events

    weDance_btn.addEventListener (MouseEvent.CLICK, clickWedance);

    inFan_btn.addEventListener (MouseEvent.CLICK, clickInFan);

    karnivale_btn.addEventListener (MouseEvent.CLICK, clickkarnivale);

    outOfSpace_btn.addEventListener (MouseEvent.CLICK, clickoutOfSpace);

    nightmare_btn.addEventListener (MouseEvent.CLICK, clickNightmare);

    karnivale2_btn.addEventListener (MouseEvent.CLICK, clickKarnivale2);

    bucharest_btn.addEventListener (MouseEvent.CLICK, clickBucharest);

    function clickWedance(evtObj:MouseEvent) {}

    trace shows what is happening... in the output window

    trace ("btn wedance was clicked!");

    gotoAndStop ("weDance");

    }

    function clickInFan(evtObj:MouseEvent) {}

    trace shows what is happening... in the output window

    trace ("btn clubspace was clicked!");

    gotoAndStop ("infantry");

    }

    function clickkarnivale(evtObj:MouseEvent) {}

    trace shows what is happening... in the output window

    trace ("btn kar was clicked!");

    gotoAndStop ("karnivale");

    }

    function clickoutOfSpace(evtObj:MouseEvent) {}

    trace shows what is happening... in the output window

    trace ("btn outofspace was clicked!");

    gotoAndStop ("outOfSpace");

    }

    function clickNightmare(evtObj:MouseEvent) {}

    trace shows what is happening... in the output window

    trace ("btn nightmare was clicked!");

    gotoAndStop ("Nightmare");

    }

    function clickKarnivale2(evtObj:MouseEvent) {}

    trace shows what is happening... in the output window

    trace ("btn carnivale2 was clicked!");

    gotoAndStop ("karnivale2");

    }

    function clickBucharest(evtObj:MouseEvent) {}

    trace shows what is happening... in the output window

    trace ("btn Bucharest was clicked!");

    gotoAndStop ("bucharest");

    }

    It works without error!

    But now I need to add an another btn on the OutofSpace page and that's it:

    spacePic_btn.addEventListener (MouseEvent.CLICK, clickSpacePic);

    function clickSpacePic(evtObj:MouseEvent) {}

    trace shows what is happening... in the output window

    trace ("The SpacePic btn was clicked!");

    gotoAndStop ("SpacePics");

    }

    When I test the movie in the output I get the error and the btn does not work. !  Why?

    TypeError: Error #1009: cannot access a property or method of a null object reference.

    at WeDance_fla::MainTimeline/frame240() [WeDance_fla. SpacePic_btn.addEventListener MainTimeline::frame240:26] < <>> <> (MouseEvent.CLICK, clickSpacePic);

    at flash.display::MovieClip/gotoAndStop()

    at WeDance_fla::MainTimeline/clickoutOfSpace() [WeDance_fla. MainTimeline::frame2:61] < <>> <> //trace shows what is happening... in the output window

    Note: I put the code for the spacePic_btn on the keyframe where begins the outofspace page, it counts

    Help, please.

    Thank you!

    1009 error indicates that one of the objects targeted by your code are out of reach.  This may mean that the object...

    -is declared but not instantiated

    n ' is not have an instance name (or the name of the instance is misspelled)

    n ' is not in the frame where this code tries to talk to her

    -is animated in place, but is not assigned the name of the instances of each keyframe for her

    -is one of the two or more consecutive keyframes of the same objects without a name assigned in the image previous (s).

  • find the memory leak when switching from Teststand object reference to vi

    I use Teststand to call labview vi and col ThisContext sequence to vi as object reference, but if I just completed this step and I can find the memory to help keep more, how can I avoid leaks memory inside the vi.

    See my vi, is displaying an interface message user.

    You should use a node reference close to close the references that you get after an invoke. In the code below, you should be able to close the references that you get the following:

    AsPropertyObject

    Thread

    Close these two references, once you're done with them.

    Also make sure you have turned off the collection of results of your sequence or you will use memory constantly to the results of the stage.

    Hope this helps,

    -Doug

  • To access the elements of an array of elements based on the value of the attribute

    Hi all

    I create a BPEL 11 g process that calls a web service which returns a data table. I need iterator on the data elements and access based on their attribute value.

    Here is a sample web service load:

    <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
   <env:Header/>
   <env:Body>
      <OutputParameters xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://xmlns.oracle.com/apps/inv/soaprovider/plsql/item_pub/get_item/">
         <GET_ITEM>
            <Row>
               <Column name="ORGANIZATION_ID" sqltype="NUMBER">101</Column>
               <Column name="ORGANIZATION_CODE" sqltype="VARCHAR2">MyOrg</Column>
               <Column name="SEGMENT1" sqltype="VARCHAR2">MySegment</Column>
               <Column name="DESCRIPTION" sqltype="VARCHAR2">Upload 445</Column>
               <Column name="PRIMARY_UNIT_OF_MEASURE" sqltype="VARCHAR2">Each</Column>
               <Column name="PRIMARY_UOM_CODE" sqltype="VARCHAR2">EA</Column>
               <Column name="ITEM_CREATION_DATE" sqltype="VARCHAR2">01/21/2014 09:22:35</Column>
               <Column name="ITEM_UPDATE_DATE" sqltype="VARCHAR2">01/21/2014 09:22:35</Column>
               <Column name="REVISION" sqltype="VARCHAR2">0</Column>
               <Column name="REVISION_LABEL" sqltype="VARCHAR2">0</Column>
               <Column name="REV_CREATION_DATE" sqltype="VARCHAR2">01/21/2014 09:22:57</Column>
               <Column name="REV_UPDATE_DATE" sqltype="VARCHAR2">01/21/2014 09:22:57</Column>
            </Row>
            <Row>
               ...
            </Row>
            <Row>
               ...
            </Row>
         </GET_ITEM>
      </OutputParameters>
   </env:Body>
</env:Envelope>

    How can I get some columns based on the name of the column attribute?

    I tried to do this:

    bpws:getVariableData('getItemResponse','body','/ns7:OutputParameters/ns7:GET_ITEM/ns7:Row[$partIndex]/ns7:Column[@name='SEGMENT1'])

    and

    bpws:getVariableData('getItemResponse','body','/ns7:OutputParameters/ns7:GET_ITEM/ns7:Row[bpws:getVariableData('partIndex')]/ns7:Column[@name='SEGMENT1'])

    but I got this compilation error:

    Error (157): xpath expression "bpws:getVariableData ('getItemResponse', 'body','/ ns7:OutputParameters / ns7:GET_ITEM / ns7:Row [bpws:getVariableData('partIndex')] / ns7:Column [@name = 'SEGMENT1'])" appearing is not valid, because XPath query syntax error. The syntax error occurs when parsing bpws:getVariableData ('getItemResponse', 'body','/ ns7:OutputParameters / ns7:GET_ITEM / ns7:Row [bpws:getVariableData('partIndex')] / ns7:Column [@name = 'SEGMENT1']) expression XPath, posted on 112. The XPath query syntax was false; the exception was: anticipated :). Check the detailed origin described in the text of the exception message and verify that the XPath expression that is named in the error message is correct. The XPath expression is defined in the BPEL process.

    I use JDeveloper 11.1.1.7.0

    Thanks in advance,

    Bill

    Use an entitlement and copy node and you can get it to work by using the syntax below.

    Assign an expression of the copy below syntax: -.

     

           

    Query="/ns1:GET_ITEM/ns1:row[$index]/ns1:column[./@name='Segment1']"/ >

           

         

    Query = "" / client: processResponse / client: result "/ >"

  • Choose the elements of an array of entry

    Hi all

    I know it's a simple question, but I got stuck at one point, the entry for my Vi is an array of clusters. I chose each element of the array on two criteria. I wish my VI to choose items and write only the items that are located at the exit and ignore the others (out of range ones). But the problem is that for the current version of the program, the program is written, elements of zero for the out-of-range ones.

    Best,

    Serkut.

    Close enough

    Try this

Maybe you are looking for