access to the root of the TitleWindow properties

Similar Questions

• I can't access the IP4 properties to change the ip address.

  I can't access the IP4 properties to change the ip address. The laptop connects to the network and has the internet connection but when I try to set a specific ip address tab of connection properties for ip4 and ip6 wireless network is grayed out.   Is there a setting in Vista the automatically it controls and does not allow access to change?

  I put IPs for the other 5 computers at home for use via my wireless router and have no problem with any other computer but one of Vista.

  Hello Jimmy,.

  I recommend trying the steps described in the Jack post that is marked as an answer in this thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/tcpipv4-properties-button-disabled/347899fa-b60a-40A3-AD2C-78ef5e0dca37
  The thread is in the Windows 7 forum, but the diagnosis also applies to Windows Vista.

• Windows 8 cannot access the drive properties by right-clicking on a no C SATA or USB drive

  Normally the drive properties are selected by right clicking the icon of the hard disk, which gives access to the use of storage and the Player options selected check disk. In Windows 8, I can get the properties of the disk on my C drive by right clicking, but not on any other drive. Right-clicking on any non C drive of the computer loses the office for about 10 seconds, then it returns, but never shows the drive properties window. Help, please! Thank you

  Hello

  Welcome to Microsoft, the best place for all your related queries windows community.

  I see that you are unable to access the drive other than drive C Properties window.

  I would like to suggest to run the command sfc/scannow because it is something related to the file system and check.

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. When the analysis is complete, the System File Checker tool indicates whether integrity violations were found. If integrity violations are detected, the System File Checker tool difficulty integrity violations.

  Follow these steps to run sfc/scan.

  a. press Windows + X and click/click on (Admin) command prompt.

  b b.. in the elevated command prompt, type sfc/scannow , and then press enter.

  NOTE: It can take some time to finish the race.

  Let us know the results.

  If you have other questions related to the properties of the disk, feel free to join us at any time. We're always here to help.

• Difference in the gateway.properties file when you access of PIA and the opening of the PSIGW folder in the domain of the web server

  Hello

  When I open the file gateway.properties by ITTO's domain\application\peoplesoft\psigw web server directory, I see certain values that are not the same, when I open the file gateway.properties of PIA by navigating to Peopletools-> Integration Broker - > gateway configuration-> gateway.properties file. I tried to clear the web server cache, restart the web server. Even then, I see quite different values of these two places. If I do any change in one of the two places, his not reflecting only with access to another place.

  Could someone delete the following point?

  -I think there is only a file gateway.properties under the web server's domain. When access us the PIA file, wherever to be included in?

  -Is the file stored somewhere in the database as well? where it recovers when PIA accesed?

  -The two are always in sync from different modes?

  -How to synchronize these two?

  Thank you

  Dinkar

  There is only one file per domain. It is read by a web service call when you view it in the PIA. This allows you to edit files from another server. The only time they will be different, that is if the URL of your entry point to a server other than the local server.

  If the URL of your entry points to the same server as your local file, then the only advantage to use the PIA to modify the file (except easy access), it is that sometimes it will update the properties in memory. Change the file in the file system requires to restart the web server for the properties to reload in memory.

• problem with access to the properties of the extended classes

  Hello
  
  Why can't I access the new properties in a class created with a declaration of mother?
  
  I have classes A and B both extend flash.display.Sprite
  B is a child of a (this.addChild (B) to the instantiation of B to A)
  
  I can access properties inherited from A to B without any effort (eg parent.x or parent.height, for example) but I can not access new properties, I created in this way (parent.myNewProp will not work)...
  
  Can someone help me please?
  
  Thank you.

  then cast parent as:

• I have a problem with access to the C drive.

  Original title: lost access to the C: drive...

  When I was a noob after installing a new HARD drive, I have written an autorun.inf file to my C: drive to make it look cool (you know, give it a cool name, and change the icon). I was not allowed to save .inf in the root files, so I decided to open the properties and tinkering with security... when I turned on my computer later, I now do not have access to the c drive, and cannot do anything administrative (including rear safety switching)

  Please, please help!

  Hello

  Method 1:

  You can enable integrated admin and restore the system.

  Step 1:

  To activate the built-in Administrator account, follow these steps:

  a.Click theStart button, then type cmd in the Search box.
  In the list of research results, right click on cmdand then click run as administrator.

  b.At the command prompt, typenet user administrator / Active: Yesand then press ENTER.

  net user administrator , c.Type and then press ENTER.
  Note: Please replace the tag with passwords which you want to set for the administrator account.

  Type exitand press ENTER. Disconnect from the current user account.

  Step 2:

  System restore

  http://Windows.Microsoft.com/en-in/Windows7/products/features/system-restore

  Method 2:

  If the problem persists, perform a repair installation (upgrade on the spot).

  Check out the following link to do the same thing:
  http://support.Microsoft.com/kb/2255099

  Note:
  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an upgrade on the spot.

  Reference:

  Back up your files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  It will be useful.

• How to enable HTML access in the office pool by using PowerShell script?

  Hello

  I use to create pools of auto related clones using a script PowerShell/PowerCLI Office. The script provides all the parameters required for the Add-AutomaticLinkedClonePool cmdlet and there is a lot of it! Creating pools in this way allows me to save about 100 clicks per pool.

  Now I want to enable access HTML for each pool, but I can't seem to find the name of the parameter.

  I checked the properties of the object returned by Get-pool-pool_id w7mw620 and compared to other similar properties office pool where access HTML has been disabled. I coulnd't not see any differences in the property values, which seem to make a significant difference for the setting "enable access HTML '.

  There was a property named "calculatedValues", which was true for one and False for the other office pool. I don't know what is the meaning of this property. Help the cmdlet Add-AutomaticLinkedClonePool or AutomaticLinkedClone-set to list this property.

  So... How can I set the property to allow access HTML from a PowerCLI script?

  Hello, in response to my own question again...

  On the basis of the above VBScript example, I invented this PowerShell code snippet that does the work of activation / deactivation of HTML access to one or more funds pools, by adding or removing 'BLAST' to the allowed protocols. It's a beast of a code, and I think that this code can still be optimized/shortcut. It works for me. It allows the use of wildcards to select a number of pools of office to toggle HTML access to.

  To use it, just customize two variables constant to match your environment:

  $dn must maintain the name of the root of your ADAM database. I think that this name is the default, but I don't know about you.

  $domain must maintain the computer name or address IP and/or port number where the ADAM database is stored. You must also have sufficient permissions to connect if it is something else then "localhost".

  function Set-BCPoolHtmlAccess ([string]$Pool_id, [boolean]$HtmlAccess) {
  <#
      .SYNOPSIS
          enables or disables HTML Access to the given VMware View desktop pool
      .DESCRIPTION
          This function enable or disable HTML Access to a desktop pool, by modifying
          the "pae-ServerProtocolLevel" property of the associated object in the ADAM
          database via LDAP. This property is a multi-valued attribute contains a array
          of string, which designates
          by which protocol desktops can be accessed. It valid values are "PCOIP",
          "RDP" and "BLAST". Controlling the existance of the string "BLAST" determines
          if the pool is accessible through HTML Access. The parameter Pool_id determines
          which object is modified.
      .EXAMPLE
          Set-BCPoolHtmlAccess "W7ST620" $True
      .PARAMETER Pool_id
          the pool_id of the desktop pool of which to enable or disable HTML access. Wildcards are allowed!
      .PARAMETER HtmlAccess
          Boolean value to set the HTML Access to.
      .OUTPUT
          None
      .NOTES
          Written by Paul Wiegmans on 31-8-2014
          "pae-ServerProtocolLevel" is a multivalued attribute, which is a little difficult to
          write correctly to the object.
          http://www.selfadsi.org/write.htm
                  Google "powershell ldap multi value property"
          http://jdhitsolutions.com/blog/2011/12/updating-multi-valued-active-directory-properties-part-1/
  #>
      $dn = "DC=vdi,DC=vmware,DC=int"   # root OU of VMware View ADAM database (CUSTOMIZE ME)
      $domain = "LDAP://localhost:389/$dn"  # connect to the ADAM database (CUSTOMIZE ME) 
  
      $root = New-Object System.DirectoryServices.DirectoryEntry $domain
      $query = New-Object System.DirectoryServices.DirectorySearcher
      $query.searchroot = $root
      $query.filter = "(&(objectCategory=pae-DesktopApplication)(cn=$pool_id))"
      $pools = @($query.findall())
      $propname = "pae-ServerProtocolLevel"
  
      foreach ($pool in $pools) {    
  
          $poolobj = [ADSI]$pool.GetDirectoryEntry()
          $protocols = $poolobj.$propname
          $desiredprotocols = @()
          foreach ($protocol in $protocols) {
              if ($protocol -ne "BLAST") {
                  $desiredprotocols += $protocol  # save a list of all existing protocols
              }
          }  
  
          if ($HtmlAccess) {
              $desiredprotocols += "BLAST"
          }
          write-verbose ("Desktop pool " + $poolobj.name + " gets protocols: "+$desiredprotocols)
          $poolobj.$propname = $desiredprotocols
          #$poolobj.$propname = @("PCOIP","RDP","BLAST")  # to reset to normal values
          $poolobj.CommitChanges()
      }
  }
  
  $pool_id = "W7S*"                  # pool_id of pool to set protocols of
  Set-BCPoolHtmlAccess $pool_id $false
  Set-BCPoolHtmlAccess $pool_id $true
  

  Have fun

  Post edited by: Sikkepitje

• It is a way to password protect the Panel options of access, including the connection settings?

  Is there a way that access to the Options panel can be locked by an administrator. In particular, I would like to block a user to change the proxy settings in tools > Options > advanced > network > connection settings. I would like to be able to lock the settings to (use the system proxy settings). The OS is windows 7 standard user account controlled by a small business to windows 2008 Server.

  If you get the α error reading failure then it means that there is a problem with the file to mozilla.cfg or Firefox can't find the file that you may have created mozilla.cfg.txt where you saved the file as a text file (check the type in the properties using the context menu to see if it is a CFG file).
  
  The mozilla.cfg file must be in the main folder of the Firefox program where also the firefox.exe file is located.

  You should have at least two lines in mozilla.cfg.
  
  The first line must always be a comment (/ /) because this line is ignored.
  
  The pref value depends on what you want to use for the connection parameters for the use of the system use 5 proxy settings.

  //
  lockPref("network.proxy.type", 5);

• No access to the DVD drive - 38 error code

  Update Driver published 07/07/08 to 23:59 has been installed on my system as made by Toshiba Tempo but rebooting my machine, I get error 38 (according to Vista) that prevents the new driver installation as the old pilot is resident in memory... ?? Effectively, this means that I can't access or see my DVD player more in other ways than in the page Manager devices Control Panel. Option driver restore is not available, perhaps because it was an update of the firmware. The message on the device properties page is as follows:

  Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  The installed updatre was frmwre-20080707134447. It includes an Adobe document that tells you what to do and how to ensure that your drive needs to be refreshed, which was easy to follow and loose my machine.

  I tried to uninstall the device and the driver, but whenever I have to reload the same error occurs.

  I'm really impressed and quite embarrassed, because it is a recommended Toshiba firmware update done using their system of Tempo, ideas or advice welcome.

  Thank you

  Matt

  Hello

  Do you see a CD/DVD drive in Device Manager?
  If so, then remove it from the list of devices.

  Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Finally restart the laptop and check if the CD/DVD drive would still be functions

  Further details can be found here:
  http://support.Microsoft.com/kb/270008/en-us

• I don't have access to the internet

  Separated from this thread.

  I don't have access to the internet. How can I get it back

  What is internet access from the browser or the network connection? What do you have on the PC?

  Open a command prompt and try "ping google.com" and see if you get a response like below.

  Ping google.com [202.124.127.249] with 32 bytes of data:
  Reply from 202.124.127.249: bytes = 32 time = 1ms TTL = 60
  Reply from 202.124.127.249: bytes = 32 time<1ms ttl="">
  Reply from 202.124.127.249: bytes = 32 time = 1ms TTL = 60
  Reply from 202.124.127.249: bytes = 32 time<1ms ttl="">

  If the request has timed out, you may need to check the network connection and see what are the settings in network properties.

• Why the system operating to deny access to the file specified to run wipe Drive 5

  Why deny operating system access to the specified file for execution unit 5 Wipe to wipe my hard drive, I need permission.

  Hi JoyceScott,

  ·         What is the operating system installed on the computer?

  If you receive no error message indicating that access is denied, take the permissions on the drive and check if it helps.

  a. right click on the external hard drive, and then select Properties.

  b. click on the Security tab, select the user name and click on modify.

  c. now, click Add and type the user name that you want to grant permissions to sub enter the names of the objects to select, and then click on check names. Click OK.

  d. now, select the user name you typed in group or user names and check full control under the terms of the authorization for.

  e. click on apply and OK. Check whether the problem exists.

  For more information, visit: What are the permissions?

• I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates?

  I have a problem of access to the Outlook account and other pages because appears "certificate error" what's happened with these certificates? Help please.

  There are two main reasons for the mistakes of certificate:

  1. Your computer's time is not set correctly.  Check your time year/month/day/hour/minute/timezone/light of day.  Right-click on the clock in your taskbar and select "set Date/time" and make sure you are ready approximately 5 minutes of real time (don't forget time zone and DST).
  2. The second reason is that Windows XP is not very good for updating root certificates.  Go to the following site:
        <>http://support.Microsoft.com/kb/931125 >
     and go down to the section:
     'Update Package root (designed for Windows XP only)'
     There is a link, you can use to download a update for your root certificates package.  Download this package and double-click it to update.

  HTH,

  JW

• Adapter LAN question, "no access to the network.

  Original title: LAN adapter issue

  Hi all, when connecting my laptop to a switch of the LED on the switch is green which means connected. The IP address on the laptop is entered manually, but when will the cmd and issue ipconfig it shows "media disconnected" and the network adapter in the Control Panel indicates "no access to the network. It also indicates that "this device is working propoerly! Please advice

  Hello

  What is the number and the model of the computer?

  Remember to make changes to the computer before the show?

  Thanks for posting in Microsoft Communities.  The problem description, I understand that you can not connect to the Internet.  Correct me I misunderstood the question

  Follow these steps:

  Method 1: Follow these steps:
  How to troubleshoot possible causes of Internet connection problems in Windows XP: http://support.microsoft.com/kb/314095

   

  Method 2: Follow these steps:

  
  Step 1: renew DHCP Dynamic Host Configuration Protocol)
  a. click Start, click run, type cmd and click OK.
  b. in the command prompt, type ipconfig / renew
  c. Close command prompt.
  d. check the result.

   

  Step 2: Try to obtain an IP address automatically
  a. open Internet Explorer, go to Tools, click on Internet Options, connections, LAN settings.

  b. uncheck all boxes except automatically detect connection settings
  c. click OK to apply the changes.
  d. check if the problem persists.

   

  Method 3: If the methods above do not help, check if the wireless card is very well and try to update the drivers on the manufacturer's Web site.

  a. click Start and right-click my computer.
  b. Select Properties and then click the hardware tab.
  c. click on Device Manager and expand network adapters in the list.
  d. right click on the adapter, then click Properties.
  e. click the driver tab and click Update the driver.

  Please follow the steps and let us know if this helped.  If the problem persists, answer and we will be happy to help you.

• How to disable access to the cd player while windows is locked.

  Hello

  Does anyone know it's possible to disable access to the cd/dvd drive while windows is locked?

  That is, I would like to press Ctrl + alt + delete to lock my pc, then while I'm away, someone presses the eject button on my cd player and it will not eject.

  I have looked in device, properties of D: drive management, security settings, etc., but have been unable to find such a control to this day.

  Any help on this is greatly appreciated.

  Kind regards

  J

  Hi JC_226,

  This isn't the Windows feature. Can not disable access to the cd player while windows is locked. However, there is an option to disable the CD/DVD device. To do this, you can follow these steps:
  a. Click Start, click Run, type devmgmt.msc, and then click ok.
  b. in the list of objects, expand CD/DVD players.
  c. right-click on the sub element and click on disable.
  d. follow the instructions in the wizard to disable the device.

  Important: If you disable a device that is required to start the system, such as your floppy drive or CD-ROM/DVD-ROM drive, these devices will not work, and your system might not start.
   
  For more information, see disable a device

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lost access to the preferences of the two priniters printer

  I lost access to the preference files to printer on the printers connected by USB 2 to a laptop running Win. XP.  The printers work without them.  I have since installed a new driver on one.  The problem remains. I join this printer to another computer and there is no problem.  Advice please on the best way to analyze this problem because there seems to be a lot of possibilities.

  I lost access to the preference files to printer on the printers connected by USB 2 to a laptop running Win. XP.  The printers work without them.  I have since installed a new driver on one.  The problem remains. I join this printer to another computer and there is no problem.  Advice please on the best way to analyze this problem because there seems to be a lot of possibilities.

  If I understand correctly, Windows XP indeed cannot replace printer drivers in certain circumstances.  The best way to go is to make sure that the old (maybe corrupted) driver is deleted and then reinstall the printer using an installation package of fresh driver (usually obtained by downloading from the website of the printer mfr).

  1. Unplug the printer.
  2. Uninstall the software associated with the printer using the control panel > Add / Remove programs.
  3. Open Printers and faxes and delete the printer (right click > delete)
  4. In printers and faxes, click file > server properties > tab drivers.  Select the driver concerned, then click on remove.
  5. Restart the computer.
  6. Run the installation package that you downloaded.  Do not connect the printer until prompted by the installation program.