Accordion in two columns effect

Similar Questions

• Insertion of a middle Page of separate text on a two column layout box

  Hello!

  I'm working on a book with a layout in two columns.  At various times, I need to insert what are effectively the chapter breaks.  Currently I have a giant text block flowing for all 65 pages.  This provision is (I think?) made necessary by the scripts that I am running for our line numbers and our notes.

  My original idea was to put the chapter title in a separate text block and wrap the text around it, so that I can keep the unique setting of the main text.  Unfortunately, in the two-column layout, this means that the text in the first column went * under * the title of the chapter to complete the first column, no matter where I moved it.

  I think I may need to end the block of text of the first chapter and start a second for the new chapter get the result I want.  However, I have a few worries about that: first of all, if I ended up simply text block, I should remove the other 55 pages (after the break) I already partially formatted and screw them from scratch in the text box of the new chapter?  Secondly, I also fear that making a separate text block could ruin my scripts endnote and line numbers.

  (NB: if I need to put an end to this block of text and starting a new one, I can't find a way to do it on a page at the beginning of a block of text in several pages, so I need help with this, too.)

  Y at - it a simple way to insert this text box so that text of the first chapter ends perfectly in two columns above it, and the next chapter starts cleanly into two columns underneath?

  Please see attached screen captures, showing the current state of things.  The text box has been inserted with a simple wrap around it.

  

  THANK YOU IN ADVANCE!

  Hello

  Have you checked characteristic Columns Span integrated InDesign? http://InDesignSecrets.com/timesaver-span-and-split-columns-in-CS5.php

  Now that you have your text formatted in a single framework with two columns, you can select the chapter header text and tell him to cover all the columns in the text block.

  This warp the need to set up a separate text frame.

  The only downside I can think is that you use the the duration columns can slow down InDesign a bit.

  Ariel

• Number of matches between two columns

  Column1	Column2
  5	5
  5	2
  5	5
  4	3
  4	4

  Football match
  3

  I basically you want to compare two columns and count matches in the corresponding lines. I tried using the following formula:

  SUMPRODUCT (--($column1=$column2))

  ... but it doesn't work! Any suggestion?

  Tiago,

  It seems you are trying to use array formulas (maybe since excel?) who do not work in number.

  Here's how I would solve this problem:

  

  Make sure that the table where data is named 'Data' (as shown, or change the table name references to match your table name)

  Add a new column (C)

  C2 = AND (A2 = B2, A2≠ "")

  It's shorthand dethrone select cell C2, then type (or copy and paste it here) the formula:

  = AND(A2=B2, A2≠"")

  Select cell C2, copy

  Select cells C2 at the end of the C column, paste

  the formula say to check to see if the cell in column A is NOT empty, and is equal to the cel in column B

  Now in the summary table (single cell table):

  A1 = COUNTIF (Data::C, TRUE)

• iBooks/iPad two columns per page

  Since this morning after an update to the iPad, iBooks is showing the book pages in two columns instead of a full page, from left to right.  How can I change this back to a page on the screen?

  I saw that too. Stupid solution. Increase your font a to the top of the smallest.

  The smaller police apparently goes into two columns.

• Compare two columns and get the percentage of cells that match

  Hello

  I'm looking to take two columns of data from different tables in the same document, which should have a high enough percentage of boxes and have another cell tabulate the corresponding percentage. I can the of seem to figure out how to do this, but it seems really possible.

  Any help is greatly appreciated.

  Thank you!

  

  C1 = A1 = B1

  It's shorthand dethrone select cell C1 and type (or copy and paste it here) the formula:

  = A1 = B1

  Select cell C1, copy

  Select the column C, paste

  Select cell E2, and then type 'TRUE '.

  Select cell E3 and then type "FALSE".

  F2 = COUNTIF ($C, E2)

  F3 = COUNTIF ($C, E3)

  G2 = F2÷SUM(F$2:F$3)

  G3 = F3÷SUM(F$2:F$3)

• How to view the menu of bookmarks in two columns

  Firefox 3.6.7 under Windows 7. I wish I had the menu bookmark appears in two columns to avoid the bottom of the scroll list.

  Sorry, it's not a function for this integrated into Firefox.

  See if this extension fits your needs.
  https://addons.Mozilla.org/en-us/Firefox/addon/74381/

  Read all the comments from the user before installing it, there might be a problem on Win7 or with later versions of 3.6. versions #.

• Combine the two columns of text

  I have two columns of text (say that name is a column and the name is the other)

  I would like to combine the two columns for the text of these two columns are in a column. (First name and last name in the same column)

  Is this possible? If so is there a tutorial somewhere?

  Hi Danielle,

  The & (concatenation operator) is your friend.

  

  Formula in D2 (fill down)

  "B2 &" "& C2.

  & joins elements into a single string.

  "" inserts a space.

  Kind regards

  Ian.

• How to compare two columns in Xl

  I want to compare two columns in the file of Xl. column A contains phrases and column B contains the words

  For example

  Column A                                                                       Column B                                                                           Column C

  I have an Apple and I'll eat every day Apple Apple

  I have a banana and eat weekly banana papaya

  Oranges are rich in nutritions cauliflowers Oranges

  Papaya is good for health                                               Grapes                                                                                 Papaya

  Oranges

  Lichi

  Banana

  I want to check each value of column B in each cell in column A, and if it matches then it should return the corresponding value in the result to me. Column C should Look Like as shown above.

  Can someone point me in the right direction here of what formula to use for this Xl.

  Thank you

  This is a forum for Mac OS X technologies, so here's an Applescript solution:

  1. Copy-paste the script in the Script Editor
  2. Select the cells in columns A and B
  3. Command + c to copy to the Clipboard
  4. Click on the button "run" in the Script Editor
  5. Click once in the top cell in column C where you want the data
  6. Command + v to paste

  Here are the results:

  

  There is no verification error here. You must select and copy to the Clipboard before the race.

  SG

  the value LstOfLsts to makeListOfLists (the Clipboard as a 'class utf8 ')

  the value theSentences to getCol1Vals (LstOfLsts)

  the value collected in getCol2Vals (LstOfLsts)

  game of theMatches to «»

  Repeat with I in collected items

  If theSentences contains I then ¬

  the value of theMatches to theMatches & i & return

  end Repeat

  Set the Clipboard for theMatches

  to getCol1Vals (LofL)

  game of col1Vals to «»

  Repeat with en LofL points

  the value col1Vals to the col1Vals & "" & i point 1

  end Repeat

  end getCol1Vals

  to getCol2Vals (LofL)

  the value col2Vals to {}

  Repeat with en LofL points

  If i's point 2 is not "" then ¬

  i copy point 2 to the end of col2Vals

  end Repeat

  return col2Vals

  end getCol2Vals

  at makeListOfLists (theTxt)

  value was to theTxt paragraphs

  the value text point of delimiters

  the value theListOfLists to {}

  Repeat with I from 1 to count was

  the value theListOfLists to the theListOfLists & {the was point i text elements}

  end Repeat

  the value point text delimiters to «»

  return theListOfLists

  end makeListOfLists

• How to read the two columns of data in a file of PDM.

  Hi all

  I am reading two data columns for the 2nd of a PDM file two sheets, as shown below.

  

  Two columns of data must then be shared so they can be displayed in a xy chart and also apply a linear adjustment VI. I implemented the graph xy and linear adjustment using a txt file (see below), therefore all the outputs work, however this application with a tdms file turns a little more tax.

  

  

  

  So, essentially, that I don't know how read the correct leaf and therefore the columns in the PDM file and then how to produce the graph xy and linear adjustment of the data types produce. Here's my current attempt, which produces several errors of the type of terminal, as well as not being able to select the exact data in the PDM.

  

  Any help/suggestions/example vi on this asap would be greatly appreciated.

  Thanks in advance,

  Pete

  Also the PDM file viewer. VI helps you easily understand the structure of data files.

• How to read the two columns of data from the Port series

  Hello

  I'm reading two columns of data from the serial port.

  Example:

  52439 52430

  52440 52437

  52209 52214

  51065 51070

  52206 52390

  I use the serial of Visa service and I can read the first column of data from the serial port, but I can't understand how to read the second column.

  I want to both sets of chart data.

  I enclose my VI.

  Thank you for your help.

  The analysis of string function takes a "Format string" on top (with the right button of the function and choose Help, which explains all the entries).  In particular, you can say 'Give me two numbers separated by a tab' and the output will be two numbers (whole or floating, depending on the chosen format).  In particular, %d\t%d specifies a decimal integer, , whole decimal.

• Two column csv to waveform curve

  Part of my bed VI data from a csv file. It has two columns, one is time of sample to the 24-hour (24 h 00), the other is reading which is an integer. I can't know how to associate these columns to a graph. It appears to correctly display the data points but does not show my reading on axis x. time I tried to separate the file and then get back together but have had no success. Any help would be greatly appreciated.

  
  

• Filter the rows in a table, based on criteria in two columns

  Is there a way easy to filter a 2d array, based on the values in two columns? For example in my attached VI the output array has the following format:

  10:57:07.776

  Quick response:

  Convert your table 2d in a cluster table where the order of pole defines how broken are managed (first fields are equa on both serach the second point in cluster)

  Run by a kind of 1 table and convert back to a 2d array.

  Faster approach:

  Group only fields serach and an index. Do the research and then use the index to reorganize the original array.

  Ben

• Need to display more than two columns in the game now (library view)

  The current reading list (under the library, not the instant game tab menu tab a top of the player) shows only two columns, the title and duration.  I can't add more columns by selecting choose columns, or restore the columns.  I have this problem with one of the entries in the left column of the display of the library (like, songs, recently added, etc.).  Is there a way can I fix?

  It's machine running a version of Windows XP on the computer and WMP11.  I had Windows XP and media player 11 on my laptop for several years and have had this problem.  I don't know what is different between the two machines that causes this problem.

  Yes, it seems to be more at hand than just differences in operating system. However, I think I found a way to get more columns in the game now:

  1 restart WMP, start to play music and go to playback.

  2. click on the heading of column Title to sort by title.

  3. switch to another view (for example songs ) and go back to playing now. You should already see the additional columns now.

  4. to make the columns 'stick' between reboots WMP, you also needed to right click on the column header in the current playback, select Choose columns , uncheck automatically hide columns and click OK .

  Tim Baets
  http://www.BM-productions.TK

• I want to put two tables on a page with two columns how can I do this?

  I want to put two tables on a page with two columns how can I do this?

  It depends on what application you are using.

  If you use Word, then a good way would be to create a single table of 5 columns, check the borders of the invisible middle column so that it appears to be two separate tables.  You will need to do the same thing for unused cells downstairs as well.

  To get the best advice on Office-Word questions, use the forum not the Windows 7 Office forum that you do.  Look at the top of this page, just below the logo MS Answers and click on Forums , then select desktop. Once there, you can select Word.  By using the forum Office will give you a better chance to find a solution to your problem, as it is inhabited by people who know much about their topic.  Search the Forum of office for the topic, then, if no notice is found, ask your question here instead of this.

• SQL query * I want to insert a file column in the other table based on two columns

  I want to insert a column records to another table based on two columns

  the query below does not work

  insert into def_ver_lnki_p (job_name)

  Select def_job.job_name

  from def_job where def_job.job_id = def_ver_lnki_p.job_id and def_job.table_id = def_ver_lnki_p.table_id;

  Just to correct sql

  Update

  def_ver_lnki_p define job_name =)

  Select def_job.job_name

  of def_job

  where def_job.job_id = def_ver_lnki_p.job_id

  (and def_job.table_id = def_ver_lnki_p.table_id);