Insertion of a middle Page of separate text on a two column layout box

Similar Questions

• Combine the two columns of text

  I have two columns of text (say that name is a column and the name is the other)

  I would like to combine the two columns for the text of these two columns are in a column. (First name and last name in the same column)

  Is this possible? If so is there a tutorial somewhere?

  Hi Danielle,

  The & (concatenation operator) is your friend.

  

  Formula in D2 (fill down)

  "B2 &" "& C2.

  & joins elements into a single string.

  "" inserts a space.

  Kind regards

  Ian.

• Page layout - change to have two columns

  Hello!

  I have the document with the pages where the text is in a column. I want to on a few pages of text in two columns. When I select these pages and change nothing of the layout (Layout - margins and columns) that happened.

  I'm doing something wrong, what?

  Thank you very much for the help!

  Kind regards

  Ivan

  Which only affects the guides. You must either change the number of columns in your setting, or change the width of the frame and add a second fame (and put on her) on these pages.

• Best way to have an image on two columns in a CSS page layout?

  My home page is a presentation of three typical fixed-width columns. For the Interior, the content pages, I need basically the same layout, except that I need to have an image that spans the columns left and Center at the top. Below the image, columns on the left and in the Center should continue on. The right column does not change every m

  My first thought is to start with a two column layout where the left column contains the image. Then I would divide the left column into two columns that start below the image, using a top margin or maybe another attribute of proper positioning.

  But before that I have to create a whole new layout for these pages, I thought I'd check and see if there may be a way easier or better to do. any ideas?

  I dare say?  Yes!  What is the absolute positioning.

  Example:

  http://ALT-Web.com/notjustagrid/index.html

  Nancy O.

• I also have a .csv file with the name of a jpeg file in a column and a text description of each jpeg format in a second column. Is it possible to automatically insert a jpeg (picture) and its corresponding text, each pair on one page, in an Indesign docum

  I also have a .csv file with the name of a jpeg file in a column and a text description of each jpeg format in a second column. Is it possible to automatically insert a jpeg (picture) and its corresponding text, each pair on one page, in an Indesign document?

  Read about to merge data in the help files.

• Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  You have placed your beam to insert at the end of your text on page 13 and then apply Insert menu: Page Break? In the v5.6.2, Pages I just add a new page to a section of four pages to this approach.

• How to insert an end of page layout in Pages 5.6.1

  my system: OS X 10.11.2; Pages: 5.6.1

  My problem: in Pages'09 (4.1) I could easily insert ends of Lay-out;

  as to do between small columns on a part of a page,

  but Pages 5.6.1 seems not to have this handy feature?

  Insert: Setting paused in Pages ' 09 v4.x and was not added to any page including v5.6.1 v5 version. That's why mix n columns and a column layout on the same rather useless page, no text box related exist in the v5.6.1, that would allow the layout simple and n columns flow with these objects.

  Suggest stick you with the Pages much more capable ' 09 for sensitive text processing tasks. If your Pages ' 09 has been installed from the iWork ' 09 DVD, Apple has a retail 9.3 iWork updater specifically for applications of DVD that you would get from Pages ' 09 v4.3. Do not apply this update for iWork ' 09 applications that were purchased at the origin of the OS X App Store.

• Convert a doc 2 single page 2 separate documents 1 page

  How to record a 2-page document of reader adobe on 2 pages of separate adobe reader so I cam email at 2 different emails?

  Hi Linda Benson.

  You must use Acrobat to that effect. Here is the procedure:

  Open the file in Acrobat-> click on the thumbnail 'Page' on the left hand Vertical - component-> right click on any thumbnail and choose "extract the Pages."
  A pop-up will appear on the screen, changing the text in ' ' text field '2' that you have two pages in your file.

  Check 'extract pages as separate files' and click on 'ok'-> select the location to save, and click 'ok' again.

  You can find these pages to single pdf in two separate files.

  Hope that helps,

  Kind regards

  Rahul Tyagi

• 5.5 Captivate insert a hypertext link in the caption text box?

  I don't seem to be able to insert a hyperlink in an area of text to an html page or to another demonstration. The only time where I see this option is the Action of slide properties section. This is not what I want. I have a slide I want to link to demos and other html pages. All my updates are underway. Can you help me?

  The option is available in the latest versions. When I looked in the help, that's what I've seen but don't see that symbol in my version of Captivate. Is there a work around?

  

  No hyperlink in this old version. You must create yourself, put a box click the text you want to use as a hyperlink and use the action of the success of this click box to point to what you want.

• Problem with CS5 to crash during the insertion or deletion of page

  I have a legacy file (teaching manual) which was created in CS2 and has been edited and updated over the past two years with no problems. The file is about 360 pages, with about 30 illustrations, table of contents and index larger size. During the updating of the material today, I went back to insert a page because the text to overflow and InDesign crashed. This happens whenever I try to insert or delete a single page. I can insert a single page on the pages i to viii, but when I try to insert a page in InDesign Sec2:1 early crashes. I can open and close the file, and edit anywhere without any problem.

  If I insert 2 pages at a time, it works fine and I can run the text on the page. But when I delete the extra page that I don't need, it crashes. It doesn't seem to be specific to any specific master page in the file. I tried several times to export to an IDML file, reopen and save it in an InDesign file, but the same problem occurs.

  The same thing with the file on the same verson InDesign which is on my laptop. This problem does not occur with other InDesign files that I've created in the past. I need help. Thank you!

  I just thought some about this, so I'm glad you popped up again.

  Seems to me you have two choices, go back to the previous version which works and re-do much editing or try to fix later. If you want to go back, open the file and check the bey in the history of file holding the CTRL key while you choose about InDesign from the menu help. You will see the full backup history in the lower left corner of the dialog box. I check for the latest version, that it has been saved, then open the file in this version and export into .inx (in CS4 or earlier) or .idml .idml for CS5 or later, and then open the .idml in CS5 and save as a new .indd and proceed.

  The existing file, you can divide and conquer stuff, but like I said, I thought instead, and in your shoes I would probably ignore the first step and try to export to text marked for each story, and then build a new doc by placing the tagged text. If it seems to be OK, place the images again and go ahead.

  Whatever it is, I think you have some heavy lifting.

• Some Web pages displays the text as tabs, and vertical separators

  I have this problem with Firefox where for some reason when I go to some random Web sites or even in my e-mails posted on the Web site is replaced by vertical and tab delimiters

  http://S29.postimg.org/r59ug5r1z/Firefox_Messed_Display.jpg

  But if I highlight the truncated text and then make a copy, I'll stick with success the original/propper text.

  I thought immediately that a plugin/addon to the culprit. So I reset Firefox (Firefox coming stock) and tried the same webpage (plain Firefox here) and got the same result!

  So I tried to run in Mode safe and all of a sudden, everything seemed ok. Then I tried standard mode (still plain vanilla) and yet again got the problem. So I guess that something is wrong with the default configurations in Firefox. Since then, I reinstalled a few plugins while Googling for a solution. No idea how to fix this?

  Try disabling Direct2D by setting the pref gfx.direct2d.disabled true on the subject: config page and leave hardware acceleration enabled otherwise.

  You can try to create a new Boolean pref on the topic: config page and set its value to true

  • Layout.paint_rects_separately = true
  • http://KB.mozillazine.org/about:config

  This way you still have the advantage of hardware acceleration, but can not suffer rendering problems.

  If this doesn't help then you can try to disable hardware acceleration in Firefox (you will need to close and restart Firefox).

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Firefox load certain pages of basic text

  Firefox will load some pages of basic text for me (ie: PC Gamer) (link to image: http://gyazo.com/7b1d3b6fa834ae717c40cc3855b5735b) how can I fix?

  You can try the following steps in case of problems with web pages:

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• When I try to scan several pages, it puts the pages as separate files instead of a single file.

  When I try to scan several pages, it puts the pages as separate files instead of a single file. For example, I may want to scan 5pages ofa patient office visit, yet, when I scan using the ADF, it separates each page in a single file.  I need to have the pages I scan have a single file. OfficeJet 6700

  prod # CV078A

  Windows 7 premium 64-bit

  Same thing for me.  I called HP about it the first time I tried I scans a document when my printer was 7 days old.  I was connected with the service to customers in India.  The technician spent about an hour with me trying to get the 6510/6515 printer to work, even to take control of my new 64 bit Windows 7 core i7 notebook.  Ultimately she essentially told me that even if it is announced to scan documents, this really means that each page is a separate document.  In other words, this printer, as well as all other issues, it is will only scan one page at a time.

• Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Hello

  2796614 wrote:

  Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Of course, it is possible.  According to what the text file looks like to, you can create an external table that treats the text file as if it were a table.  Otherwise, you can always read the file in PL/SQL, using the utl_file package and INSERT of PL/SQL commands.

  You have problems whatever you wantt?  If so, your zip code and explain what the problem is.

  Whenever you have any questions, please post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the exact results you want from these data, so that people who want to help you can recreate the problem and test their ideas.  In this case, also post a small sample of the text involved file.

  If you ask about a DML operation, such as INSERT, then INSERT statements, you post should show what looks like the tables before the DML, and the results will be the content of the table changed after the DML.

  Explain, using specific examples, how you get these results from these data.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: Re: 2. How can I ask a question on the forums?

• HOW to: Insert the symbol of the degree in text

  An another "How To" question.

  Running PE 13.1 on a Windows PC with WIN 7 64-bit.

  How to insert the symbol of the degree in text - I would like to have something like "temperature + 2 < degree symbol > water C.

  where < degree symbol > is the small circle (triggered).

  I found how to insert copyright (Alt + 0169) & the Tilde (Alt + 126) helped by Wikipedia, but the Windos ciode for the degree symbol is not shown - just the

  Unicode U + 2103 but Alt + 2103 just inserts a '7'.

  HEM

  HEM

  If you have the copyright © symbol to work for you with Alt + 0169, I think Alt + 0176, you should get the degree symbol as in 32 °.

  If please give it a try in the Titler, open Premiere Elements and let us know if it worked for you.

  Thank you.

  RTA