Account error Windows 8, the synchronization failed

Similar Questions

• STOP: C0000145 (ERROR of APPLICATION), the application failed to initialize properly (0xc0000005)

  STOP: C0000145 (ERROR of APPLICATION), the application failed to initialize properly (0xc0000005).  Click OK to close the application.

  Occurs when I try to restart my laptop and ends the boot process.

  03/08/11 I get this same error, and I see that nobody has answered it yet. DPR anyone has any idea other than a new image for this problem?

  Rodolphe/Spyware/Malware infection, blue screens don't have an option to click OK to finish or even forget that you can click on anything. If you do not work in safe mode or even last known good configuration you can try a repair installation, but you can still loose data like that. I would just pull the information you need out of the HDD using a speaker and then wipe and start over from scratch. Don't forget to scan your files if you do not import everything using a speaker. However if you can access the mode safe mode with networking, try to download malware bytes and running (don't know how its spelled) it will remove files such as _is27.exe which is a (Rogue.Installer).

• Why that I get an error called "check the operation failed" or "verify operations failed"?

  Why that I get an error called "check the operation failed" or "verify operations failed"?

  I have Adobe Acrobat X Pro

  I even uninstalled and reinstalled my Adobe Suite full - still the same problem

  Help!

  Acrobat Reader XI does not have this problem, but Acrobat Reader XI can not do all the functions acrobat X Pro can do

  I even tried to create a new user - not good - still the same error keeps popping up

  Help!

  Hi all

  There is a temporary problem with our servers which has now been resolved. If please re-launch Acrobat and let us know if still face you this problem.

  Thanks for your patience,

  -Ashu

• How to recover my account live windows after the error code 3219

  How can I recover my account to windows live mail? I get a popup that says error CODE 3219, now I can't receive or send emails, please help me thank you kindly.

  Microsoft can't "Delta Sync" in windows live mail
  If you use ONLY to send and not calendar & contacts windows live mail (any version), you can configure to operate using IMAP/POP.  If you do not need to synchronize the calendar & contacts...
  It is an excellent replacement for Windows live mail which is free to try (up to 2 accounts) that BECAUSE of the work with the new outlook e-mail format called emclient.  There is also a paid version. You can either get here
  http://www.emclient.com/
  It works with Exchange, POP, IMAP and looks like Windows live mail.  Frankly, it's the first replacement I've seen that actually works.  I spent.
  They have their own support forums, a decent product and seem to be the only replacement for WLM that has the appearance of it.
  You can import all your windows live mail in emclient easily by doing a file > import > windows live mail.  This will import your current data of WLM in emclient
  On the side of caution I make a copy of the entire record of the WLM and save it somewhere safe.

• Windows whenever the upgrade failed

  To make the windows anytime upgrade, that I run the program, enter the key, click Next, accept terms, wait 10 min thing and two minutes later, the error appears. "Windows Anytime Upgrade was not successful"-"the upgrade has failed. Please retry the update' and 'go online to try to solve this problem' below, so I. Please tell me how to fix, I think that its probably my internet (if you look at my other question).
  Thank you

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• 0x8100000A error message when the backup fails.

  When my system tries to make a regular scheduled backup, I get the following error message:

  The backup has failed.

  An error has occurred. The following information can help you to resolve the error:

  The last backup set cannot be found. Make sure it is accessible and it has not been deleted. Otherwise, create a new full backup. (0x8100000A)

  How can I fix it?

  I use Windows Vista Home Premium on an HP computer. Thank you.

  http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

  Unlike what you said here, Vista Home Premium does NOT have a backup of the computer.
  Read the info in the link above from Ms.

  You need Vista Business or Vista Ultimate or Enterprise Vista for backing up the computer.

  Make the backup file.

  See you soon.
  Mick Murphy - Microsoft partner

• Ripple error deployment to the simulator fails

  Hi, I'm taking my first steps in development of BB. My company asked me to do a BB - app with IBM work lamp. I installed the SDK Webworks, waving and a BB Simulator (model 9900). I also added the necessary environment variables on Windows 7. I did a hybrid application that contains the html, css and javascript. After the creation and deployment of the local console of the work light, I can open the app with ripple. After the start of the services, I can pack and start the work of packing App., but the deployment on the simulator fails. I get the following error:

  Spawning Simulator 9900 - 7.0.0.384...

  stderr: CreateProcessW: the system cannot find the specified file.

  Exit take flight for 9900 - 7.0.0.384

  I have seen this error on the forum, but others had when packing. I get it through to the Simulator. Can someone help me with this?

  I solved my problem by choosing another Simulator, 9860-model. Ripple now starts the Simulator, which is extremely slow. The hotswap function crashes immediately, but the Simulator works with my application. However I am concerned that blackberry development tools is so buggy. But as long as I don'tn use the simulator that's good enough.

• Error "Windows back up has failed." Error code: 0 x 81000031 "when you save.

  Original title: "incomplete backup.

  I see a ' warning: 'Windows back to a failed'. " Error code: 0 x 81000031.  What does this error mean?

  (I use Windows 7 Home Premium.  The location of the error is "on the elements' (my external hard drive).

  Hi Sidney,

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description, you are having problems with the incomplete backup.

  Perform the steps from the link below and see if it helps.

  Error code 0 x 81000031 occurs when you try to back up files by using the backup and restore on a Windows 7 computer Assistant

  Meet us if you face problems with backup or any Windows question, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Which is better to have several user accounts from window for the same person, so having much Firefoxes or have much Firefoxes under a Windows account user?

  Right now I have about 6 window user accounts (just for me on a single computer) because I didn't know I could put more Firefox then one per account. I leave the tabs upward when I close Firefox, because if I just bookmarks I won't finish my work I was doing with these sites. Now that I know how to put multiple Firefoxes under a user account. That would make my computer fast or not, it matter if I put all my Firefoxes on a window user account or have 6 windows user accounts, each with their own Firefox?
  -Thank you

  It is more work to move to a different Windows account and then open another instance of Firefox with a different profile.
  If you only use other windows accounts for the use of Firefox like this and not for any other purpose, then there is nothing against the passage to a single Windows account to make it easier to manage such things as the backup of your personal data or copy data between the other profiles.

  So, it's up to you if you want to switch to a single Windows account.

  See also:

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile
  • https://developer.Mozilla.org/Mozilla/Multiple_Firefox_Profiles

• Error window options the boot environment

  original title: Environment error window options!

  Whenever I connect to my laptop, I get an error windowwith the message that Windows can not find the environment option that was entered.  Can someone explain what it means, what has changed and how get rid of? I am a novice with computers, so I hope that is nothing too technical.

  Hello

  ·         Did you the latest changes on the computer?

  I suggest that you check to see if the problem persists in safe mode.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode.

  If you are facing a similar problem in both safe mode, then I suggest that you do a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  It will be useful. Let us know for help.

  Kind regards

  Ramata Thakur

  Microsoft Answers Support Engineer. Visit our Microsoft answers feedback Forum and let us know what you think.

• Smartphones blackBerry voice dial on 8350i error caused by the Synchronization Manager

  I get"unable to allocate memory. Close other applications and try again.  Voice dialing error is done after each sync using Desktop Manager.  No applications are open.  Clears the error if I remove the battery and voice dial works as it should.

  The continuous voice dialing to work until I have sync BB with PC. Immediately after the synchronization, the error message appears when you try to voice dialing.  Remove the battery after each synchronization is not a viable option.  All solutions?

  Thank you

  Hi and welcome to the forums!

  Until the sync go to options, status and write the file number for free.

  Repeat directly after synchronization. Send the two sets of numbers.

  Thank you

  Bifocals

• Error - 'Auntentication with the server failed. Family Tree Maker software does not connect on the Web dashboard.

  Original title: Family Tree Maker does not connect on the Web dashboard.

  My Family Tree Maker 2009 does not connect to the Internet comes up with the message which is cannot authenticate the server, but it tells me that my version is up-to-date.  He has always worked so far? Comes with the following message if I try to do anything that involves the net.

  "Auntentication with the server failed.

  Hi HelenTL,

  You did changes to the computer before this problem?

  If you have any software security & firewall installed, disable them temporarily and check if the problem persists.

  
  Note: check to allow them back on the computer after you complete these steps.

  Hope the helps of information.
  Please post back and we do know.

• Windows Server 2012 R2, synchronization of offline files and Folder Redirection GPO. The synchronization failed. Access denied.

  I need a solution for the problem below.  I have seen that other people have experienced the same problem but I couldn't find a solution.

  I've set up a GPO that synchronizes user files to a network, for example, the My Documents folder location.  The client machine is running W7 Pro x 64.  Assume that the primary user of the machine is user1.

  Sync Center displays an error.  The error reads 'Documents. (\\Server\Profiles$\User2).  Access is denied. »

  Obviously, the problem here is that despite being connected as long as User1 tries to synchronize the user folders to other profiles on the computer the folder redirection, whether they are connected or not.

  We never seen this before and if so has anyone ever managed to find a solution to this problem on a shared machine?

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Data collector on Windows 2012, the installation fails.

  Hi guys.  I have a problem of noob :(

  I try to install a Suite of Enterprise Manager, so my no are this:

  1. Windows Standard 2012 x86.64 server, 12 GB RAM, 4 cores.
  2. 5.6 MySql database local, x86.64.
  3. Enterprise Manager 6.2.2
  4. Installation is OK.

  Configuration:

  Type data collector: primary data collector

  Database: MySql database.

  OS Services Information: Local service account.

  Data source properties œuvres very well (tables are created in the mysql database).

  The SMI - S server properties. Not active.

  Finally, the setup assistant shows this error:

  

  Can you help me, folds?

  Thank you guys.

  OKS, I think I found the problem.

  Whell, to install the latest version of java: 7u21 Jre. But 7u21 has same bugs: (.)

  So, I uninstalled jre 7u21 and I installed 7u17, and Setup works very well XD.

  Don't forget: Java 7u21 is a villain, use an older version.

• Error Windows XP Mode: "device failed to initialize for mode video full screen.»

  When I try to run an old MS-DOS application in Windows XP Mode, I get the following error in the system under MS-DOS 16-bit: "the device video failed to initialize for mode full screen.» I use Windows 7 Ultimate x 64 edition.

  The program starts in mode text very well, but when he tries to enter graphics mode, the error message described above results.

  It would seem that the emulation of the video driver in Windows XP Mode isn't quite complete as far as emulation goes. The application is an old one that was written in Borland Pascal 7.0 and used the BGI graphics programming interface. There is no equivalent version of Windows, and I would like to be able to run under Windows 7. He ran under a native install of Windows XP Pro, switch mode full-screen graphic as needed without any problem.

  Is there something that can be done to make it work under Windows XP Mode in Windows 7? The emulator of map graphics of virtual machines may be adjusted/changed somehow to run full-screen graphic mode?

  I had the same problem too, so instead of using the windows mode I downloaded dosbox and the programmaX interface. It's great for running applications in DOS on windows (all versions as far as I know.)

  www.dosbox.com

  its pretty easy to install just choose a directory to install to. Then to install the interface you simply point to the directory where you installed dosbox. When you start the interface (programmaX), there will be a button to the top of the upper part called Assistant. Just click on the wizard button and follow the pages. If you want to create an icon for it in windows just goto tools... create a shortcut, and then click ok when the box is in place. ;)

  Best of all, its all to is free with the exception of pay for you're internet usage.