account is defined as an administrator of the computer, but behaves as a limited account

Similar Questions

• I am the administrator of the computer, but all my files go to my girlfriends name, how can I change this?

  I am the administrator of the computer, but all my files go to my girlfriends name. So I deleted his account, but he always goes. I tried to change the file but it won't let me. What should I do?

  Original title: file name

  Hello

  You did changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  I suggest you to download and run the latest Microsoft security on your computer Scanner and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Method 2:

  Try to create the new user account and check if it works very well.

  http://support.Microsoft.com/kb/811151

• Why am I restricted to oopening add or remove the program from the control panel? It says that I need to contect the administrator of the computer, but that OF me, ONLY the user of the laptop!

  I have a Dell Inspiron 600 m. I need to remove ALL of the programs what arew associated with iTunes AND Quick time as iTunes program loads WILL NOT correctly... for the 10th time or starts by default in State thatI need to remove iTunes and reinstall again... I can't get to the removal of the program part.

  Jim,

  Sorry if this question is redundant, but are you connected to an administrator account? Please see similar to the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/unable-to-delete-programs-Windows-7-says-i-am-not/e8867215-9e5c-4105-94e3-79197ee49b87

• I am the administrator of the computer and forgot my password. I followed the tip and still can not access my account, I can't just remember or find the place where to get my account

  Please help I just took my old computer out of my 6 years ago storage unit. I forgot my password. or the administrator of the computer. I took the trick and I tried every way I can think of, but still cannot access it. What should I do or where do I go for the info access into something. It's my other computer that's how I got to ask this question.

  Hello

  This is information from Microsoft for when you forgot your XP password.

  "How to connect to your Windows XP-based computer if you forget your password or if your password expires"

  http://support.Microsoft.com/kb/321305

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Other information above, we can not help you more with this.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon

• Cannot find the administrator on the computer.

  There are two standard users on the computer, but I can't find the administrator so I can upgrade the computer.  More when he asks you for the administrator password, there is no where to type the password.

  Enable the (hidden) on Windows 7 or Vista administrator account

  Carey Frisch

• Not been recognized as the administrator of the computer

  Having downloaded software, when you try to open it, it says:
   
  "you cannot run for the first time, to register or unregister Sibelius, unless you are the administrator of the computer.  Please log in as an administrator of the computer and try again.  (After the recording of Sibelius, any user account can use Sibelius). "

  The only problem is that I am the administrator!  I tried switching between user accounts...

  Hi Blueberry.

  You can try the steps below and check if the problem is resolved.

  First, you will need to disable all security software on your computer and check for the issue.

  Make sure that you re-enable the security program after reviewing the issue.

  Then try to start your computer with the default Administrator account and check the number to do that follow the steps provided below.

  Open the start menu, type lusrmgr.msc in the search line and press enter

  NOTE: this file is located in C:\Windows\System32\lusrmgr.msc

  a. open the User Manager and local groups.
  (b) in the left pane, click the users folder.
  c. in the middle pane, right click on administrator and click Properties.
  d. activate the account administrator of Buit-in-
  (a) clear the account is disabled box.
  (b) proceed to step 6.
  e. to disable the account administrator of Buit-in-
  (a) check the account is disabled box.
  f. click OK.
  g. close the window local users and groups.
  h. disconnect you, and you will now see the built-in Administrator account log additional icon (active) or removed (disabled) to the log on screen.

  NOTE: Click on the Administrator icon to open a session the built-in Administrator account.

  Now the steps provided above you must check if you are able to solve the problem,

  If you are able to resolve the problem with the default Administrator account, then you must follow the step provided to create a new user account and set the below corrupted user profile.

  Create a new user profile.

  Now you must create a new user account and check the question of do you need to follow the steps below.

  a. open user accounts by clicking the Start button.
  b. click Control Panel.
  c. click on user accounts.
  d. family Safety.
  e. click on user accounts.
  f. click on manage another account.
  g. If you are prompted for an administrator password or confirmation.
  h. type the password or provide confirmation.
  i. click on create a new account.
  j.Type the name you want to assign to the user account.
  k.Click an account type.
  l.Click create an account.

  Now search for the question.

  Follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Security Spybot system - try to immunise the computer but the denied permissions to process because I don't have administrator rights

  I have spybot installed system security.  Trying to immunize the computer, but the denied permissions to the process because I have "lack administrator rights."  However, I am administrator and the only user of this computer.  Attempted to run the program as an administrator, but without success.

  Frustrating, huh?

  Have you checked the Spybot Forum to see if they can help you?  Bet that someone else using Spybot S & D has faced this problem before...

  http://forums.Spybot.info/

  And have you seen this? http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/insufficient-privileges-as-an-administratorand/139f3148-C123-42A2-a37e-36a52e836e6d

  Kind regards...

• Firefox starts on the computer, but will not be displayed on the screen

  Firefox is loaded on a dell Windows XP computer; It works fine one day. The next day I had cleaned up cookies and temporary files when I clicked on the icon, it acted like it was running, but would never appear on the screen. When I went to start it again it told me he was running, but I still don't see the program.
  I had to reboot the computer, but when I tried to start it again, it did exactly the same thing.
  I uninstalled and reinstalled but that has not solved the problem.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox and all the leftover program files and then reinstall Firefox. Please follow these steps one by one:

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click Exit in the file menu or Firefox) and confirm all future messages.
  3. Now, uninstall Firefox by following the steps mentioned in the article to Uninstall Firefox .

  IMPORTANT: Under Windows, the uninstall program has the option to remove your personal data and settings. Make sure that you have not check this option. If not all of your bookmarks, passwords, extensions, customizations and other Firefox data user profile will be removed from your computer.

  After uninstalling Firefox on Windows, delete the folder of the program "Mozilla Firefox", located by default in one of the following locations:

  • (Windows 32-bit) C:\Program Files\Mozilla Firefox
  • (On 64-bit Windows) C:\Program Files (x 86) \Mozilla Firefox
  1. Go to the Windows Start menu and click on 'computer '.
  2. In the Explorer window that opens, double-click on disk Local (c) to open the C:\ drive.
  3. Find the folder "Program Files (x 86)" or "Program Files".
     • On 32-bit Windows, double-click the Program Files folder to open it.
     • On 64-bit Windows, you'll see a folder "Program Files (x 86)" AND a "Program Files" folder. Open the Program Files (x 86) folder.
  4. You are looking for a folder of Mozilla Firefox . If you find one, right click and select delete and confirm that you want to move the folder to the trash.

  Now, go ahead and reinstall Firefox:

  1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
  2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

• After a new installation of OSX Lion, I want to reinstall my firefox sync preferences. I saved my key before clening the computer, but not firefox indicates that the key is incorrect. Any ideas would be most appreciated!

  After a new installation of OSX Lion, I want to reinstall my firefox sync preferences. I saved my key before clening the computer, but not firefox indicates that the key is incorrect. Any ideas would be most appreciated!

  Try typing the key to recovery without 5 dashes.

• Mail app screen complete fillings of 27 inches. Cannot reduce it. Tried to restart the computer, but no change. All covered controls can then stop just hit control Q

  Mail app screen complete fillings of 27 inches. Cannot reduce it. Tried to restart the computer, but no change. All covered controls can then stop just hit control Q

  You should be able to move your cursor to the top of the screen and the menu bar will fall.  So, you start with

  

  Drag the slider to the top of the screen against the edge and hold that and you should see

  

  Click the button of "green".  This should take you out of mode full-screen Mail.

  Command + control + F should do it too.

  Also when you have the cursor at the top of the screen and the menu bar comes down, you could also use Mail-> view-> full screen output

  You should also be able to use the command + Tab to switch to another application

• Elgato EyeTV - I copied my recordings on another external hard drive, assigned to this disk as the location of the Archive, restarted the computer, but the location of unpublished/are not recognized. (End of 2006 Intel iMac / OSX 10.7.5 Lion)

  Elgato EyeTV - I copied my recordings on another external hard drive, assigned to this disk as the location of the Archive, restarted the computer, but the location of unpublished/are not recognized. (End of 2006 Intel iMac / OSX 10.7.5 Lion)

  What do you mean by "assigned to this disk as the location of the Archive" is this something to do with the software you use?

  The drive is formatted for Mac?  Menu go to menu, click Finder go > utilities > disk utility > click on external drives partition - format it sets out Mac OS X extended.   Otherwise, to save the files on the disk and ease than Mac OS

  

• HP Officejet 6500 Paper Out status on the computer but the paper loaded and test page prints

  We have a HP 6500 CB815A, which works well for almost a year. As of today, we get "Paper Out" status on the computer, but there is paper loaded in the tray... the same high quality paper as we always use. The test printer utility reports the same status. However, the printer can print a test page and fax without printing problem status.

  I unplugged for 30 seconds to reset, but we get the same status.

  Someone has had this same problem and solved?

  Thank you

  Dave

  If you have not tried to reboot your PC, I would. If this does not clear the issue, I would follow the following steps:

  1. Click Start-> Control Panel
  2. Select uninstall a program (it's the heading programs)
  3. Find your driver HP software; Select it by clicking on it once, then select Edit. If the change is not available, select uninstall/change.
  4. Select repair and then follow the prompts for your software repairs itself.
  5. If your software does not have the repair option, it may be advisable to download the latest drivers from support.hp.com site. Uninstall the drivers for your printer, and then reinstall them using.

  If these steps do not work, please post and I can continue further with troubleshooting.

  Good luck

  Brent

• Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install the updates but the shut down the computer, but the computer stops until they install.

  Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install updates by shutting down the computer, but the computer stops until they install.

  Hello Tallydupp, welcome.

  Do you by chance have Google Desktop? Some users have reported interference problems in Winodws 7 while using an older version of Google Desktop.
  Try to uninstall it if it exists.

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Canon PIXMA MG5220 Photo-All - in - One Printer - my printer print when connected to the computer, but not when it is wireless

  Window indicates that my new printer Canon PIXMA MG5220 Photo All in One Printer is compatible with my Dell Inspiron E1705, my printer prints so that connected to the computer but when I try to print wireless, it does not work. The printer is wireless and I have a wireless cable modem, what am I I lack to the printer wireless?  Please advise.

  Hi LouiseFarmer,

  It seems there is a problem in the basic WIFI the printer setting.

  I suggest you show the manufacturer's Web site to learn more about the drivers and the printer setting to print via WIFI.

  http://USA.Canon.com/Cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_printers/pixma_mg5220#MiscWirelessHelp

• CD/DVD is recognized by the computer, but does not

  My CD/DVD is recognized by the computer, but does not... tried fix it did not help

  My CD/DVD drive has stopped working.  My computer recognizes the drive but when I put a disk in it cannot read.  I tried multiple disks, but nothing will work.  I tried microsoft fixit, but it does not work.  He said that the media cd/DVD drive is not readable.  Help, please.

  Is that your CD/DVD drive is older than 1 year?  Then, the drive may be defective, with a faulty lens.

  I don't think that any form of manual registry change or fix tool will work in the situation.
  S.Chatterjee