Canon PIXMA MG5220 Photo-All - in - One Printer - my printer print when connected to the computer, but not when it is wireless

Similar Questions

• Canon Pixma MP610 Photo all-in-One Printer

  I just upgraded computer and operating system from XP to Windows 7, and while the printer works fine, I can scan is no longer. The scanner starts scanning but then he suddenly stops and I get an error message saying that it cannot communicate with the scanner (Code: 2,155,0).

  I have updated the driver from the canon website:

  Details - MP610 series MP Driver Ver 1.01 (Windows 7 x 64 x 64/Vista64/XP)

  Hi Gary,.

  I suggest you follow the suggestion mentioned in the article:

  http://support-SG.Canon-Asia.com/contents/SG/en/8100065300.html

  I hope that the above information is useful!

• HP All in One printer will communicate with the computer.

  Original title: HP PHOTOSMART ALL IN ONE PRINTER C4480

  MY COMPUTOR KEEPS TELLING ME IT IS THERE HAS NO COMMUNICATION WITH MY PRINTER, I TRIED TO DOWNLOAD AND INSTALL FROM THE NETWORK DRIVER INSTRUCTIONS TO FIX THIS PROBLEM WITH NO NO SUCSESS I SHOULD THROW THIS PRINTER AND BUY ANOTHER

  Hello

  ·        What operating system is installed on your computer?

  ·        What is the exact error message that you receive?

  I suggest that you follow the steps in the link and check if that helps:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  You can also check: http://h30434.www3.hp.com/t5/Other-printing-questions/HP-Photosmart-C4480-All-in-One-gives-error-from-HP-Solution/td-p/105711

  Printing problems? Try the HP Print Diagnostic Utility

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02114788&cc=us&DLC=en&LC=en&product=3418705

• HP Deskjet 2540 all-in-one: printer stopped connecting to the wifi network

  Hi, my printer has suddenly stopped detecting my wireless network. When I turn on the printer, wireless blue light continues to blink and there is an exclamation point on the screen of the printer. I still have the same wifi network as before and have not changed it or its parameters. I have not physically moved the printer and the wireless works fine for all computers, iPads, and phones.

  I tried to uninstall and reinstall the HP Utility Set Up software but it couldn't detect the printer to set up.  I also tried running the diagnostic results, but all the results, said 'Not work', 'Not applicable' or 'None'. I can't even an IP address for my printer.

  My laptop can detect the printer if I turn on the wireless Direct button and I connect to this network on my laptop, but that's all. I'd rather connect the printer to the wifi so I can print from all my devices (phone, iPad etc.). The printer is less than 6 months and I do not understand what is the problem with him. Can you please specify?

  Hey @Sue1990,

  Welcome to the Forums of HP Support! I hope you enjoy your stay here.

  I understand that the all-in-one printer Deskjet 2540 does not connect to your wireless network. I can help you with that.

  To connect the printer to your network again you will need to run the USB cable from the printer to your computer Mac OS x 10.7. This makes the open Applications, Hewlett-Packard and inside this folder you will find a program with a similar name to the installation wizard. If you run this program, then you will find options to connect your printer to your wireless network.

  Please let me know how it works for you and let me know if you have any questions.

  Have a wonderful evening!

  If this solves your problem then please help others to find this post by clicking on accept as Solution on my post.

  If you appreciate my help so please let others know by clicking on the icon below my post thumbs up.

• How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

  How can I find the latest driver for my Canon MX310 all-in-one printer after "redevelopment" of the new Mac OS (El Capitan)?

  Have you looked at the site of Canon?

• How to get the Dell 944 Photo all-in-one printer driver to work

  I just bought the Inspiron 580 and am trying to use my existing printer (Dell Photo All in One 944) how to download correct driver for the printer to work with the new computer?

  S Pipkens,

  First run delete print jobs to remove all print jobs stuck in the queue.

  Unplug the printer.

  Download and run the patch (utility cleaning printer) untip it prompts you to restart your computer.

  Restart your computer. Make sure that the printer has been deleted. Driver Manual printer removal

  Download and install the proper drivers from...

  Reference Dell 944 all-in-One Printer owners thread (W7) (Patch is also located here)

  Firewalls and anti-virus programs will block communications.

  Rick

• Reference the Dell Photo all-in-One Printer 964 Installation

  I have a Dell Dimension E310 and a Dell Photo all-in-One Printer 964.  I am running Windows XP.

  My printer was working fine, but the scan did not work right.

  I uninstalled Dell 964 printer to help to change / remove programs.

  I tried to reinstall Dell 964 Printer by using the Drivers and Utilities CD: printer all-in-one Photo Dell 964 CD came with my computer.  I had this CD for 6 years and have used it to reinstall the printer before.

  I put the CD in D drive.  Sometimes, it will open the installation box (sometimes it isn't) where I can choose to install to a personal computer or a computer on the network.  I click on personal computer and wait.  Nothing happens.  In the past this action begins the process of installing the printer.

  Sometimes, I put the CD in D drive and nothing happens.  In this case, I opened my computer then right click on the D drive (which shows the Dell CD).  I click Open.  Sometimes, the installation box opens.  Sometimes it is not.

  Sometimes, a box opens indicating that the computer has detected new hardware - Dell Photo all-in-One Printer 964.  Operating instructions say if ensure that the Dell installation CD is in drive D, and then click Next.  He moves to another window where it says that it is looking for the CD.  Just, it maintains the search but can't find it.

  My CD of Installation is worn?  Is that why the computer can't find it?  Or something else going on?  Download the software of the printer from the Dell website?  Can I get a new CD Drivers and Utilities: Dell CD 964 Photo all-in-one printer?

  I have a limited knowledge of the computer.

  I appreciate any help anyone could offer.

  Thank you.

  Hi ColemanCreative,

  Please follow the instructions mentioned in the link below to uninstall and reinstall the drivers for your Dell Printer 964. Make sure there is no document in the queue before you uninstall the drivers.

  How do I uninstall the existing printer drivers: http://dell.to/18M5Oki

  If the problem persists, follow the steps mentioned below:

  Click the link for the Dell 964 printer drivers. Select operating system (OS) Vista. Once the operating system is selected as Vista, you will see an added option to run a cleaning/Patch Wizard to remove the old Dell printer software. Run the hotfix and restart the system. Make sure that the USB cable is not connected to the computer when uninstalling the printer drivers.

  For installation of printer drivers Dell 964:http://dell.to/13u7fzp

  When the system has restarted, check printing software has been removed and then install the drivers for the same link mentioned above. This time, select the operating system such as Windows XP, which is the operating system on your computer before you download and install the drivers.

  Hope this solves the problem for you. Let us know if additional assistance is needed.

  Thank you and best regards,
  Babita S
  #iworkforDell

  For easy access to the drivers, manuals and updates, please visit our Support Site .

• Using Dell Photo All in One printer 924 with computer Inspiron laptop with Windows 7

  I can't get my Dell Photo All in One Printer 924, to work with my new laptop Inspiron with Windows 7.  I tried the divers and untilities to load the disc that came with the printer (which I have used before with a Dell PC) but the software is not complete loading and I get no explanation.  Go to the Dell site for pilots etc was no help.

  Dell is not win7 driver/software for this model, later are for 32-bit vista

• 5740 HP e-all-in-one printer: how to change the destination for the scans folder

  I bought a HP Officejet 5740 e-all-in-one printer I connected wireless to a Win 7 PC. A month later, I added a new win 10 PC in my network (LAN), and I also installed the printer on this new PC. When I went to scan a document using the HP (NO Windows Fax and Scan) print software, the printer asked me which PC to scan to, and I chose the old Win 7 PC. The scanned image went to the folder My Documents\My scans of Win 7 PC, as expected.

  Two questions, both assuming I want to use the HP software to scan:

  1. is there a way to set a default value of PC to the computer target for digital images?

  2. How can I change the folder to which scaned images are sent?

  What are the answers to these two Qs if I decide to use Windows Fax and Scan instead of the printer software?

  Any help would be appreciated.

  Roy

  Hi Roy,

  Yes, you get a more integrated experience if you install the vs HP software by using the Add method of the printer.   And Yes, you should be able to do much more PC software rather than on the front panel of the unit.    And Yes, the aspect analysis software PC is much better than the Windows Fax & Scan.   Windows Fax Scan & gives a good experience of the box and is sufficient for many, but for those who want to do more, such a framing auto, rotate, reorder pages, etc... the HP scanning software is much better.

  I forgot what version of HP comes with your OJ5740 scanning, but we she recently rejected a new more complete solution that comes with the version that installs for your device recommended.   Here is a link where you can get that below.   I recommend you to install the latest web downloadable full version for your device first.   Then install this

  HP extended Scan

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi for Windows.

  You'll then have two versions, one called "HP Scan" and the other called "HP Scan extended.   If you find that "HP Scan" looks like 'HP Scan expanded', while the product was the version latest (we drove to this new version about 2 years ago).

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• HP PSC 1317 all-in-One Printer Windows 7 64 bit driver could not install

  Hello

  HP PSC 1317 all-in - One Printer driver Windows 7 64 bit does not.  I tried to install the driver after the incredibly long download (362 MB) to be told by windows that there is no driver.  I have uninstalled the software 3 times and reinstalled.  I unplugged, disconnected, re-downloaded and re-installed.  I downloaded the 64 bit vista drivers (they do not work).  I came to your site to seek support that is denied to me because the printer is out of warranty.  Unless, of course, I want to pay for it.  Which I did, after spending a considerable time (see above) trying to get it work on Windows 7.  Last thing to install on another machine, which I just do exactly the same result, and no sign of anyone else having the same problem everywhere.

  Now what can I do to get this printer to work?

  

  I solved this by using Windows update, which then installed a driver in the end.

  This was not a great experience.

  Why have a download for the version of 64-bit Windows 7 for this printer that puts all the other bloatware of HP but does not contain any driver.  Then you perform the update from Microsoft to get a signed HP driver?  Why can't the HP driver actually be content in the download presumed HP so you can Dodge all the crap software I just uninstall anyway.  A huge waste of time and effort.  Two weeks to solve a problem that should have been done in twenty minutes.

  Not good PR client on any level.

• "Error please make sure printer is connected to the computer" when installing HP Photosmart 5515.

  Original title: my HP Photosmart 5515 will be OK: print/copy/scan to memory card. BUT...

  Running Windows 7, new printer installation, I tried HP site and Instruction Book, uninstalled and Reinstalled.

  Same problem each print/copy/scan time.will memory card OK. BUT does not connect to my laptop to scan to the computer wireless or wired, it rises "year error occurred while scanning, please make sure that printer is connected to the computer.

  Hello

  Method 1:

  I suggest you run the automated FIXIT from the link below and.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  I also suggest you to go through the steps mentioned in the link mentioned below and check.

  Scanning problems? Try the HP scan Diagnostic Utility

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02114802&cc=us&DLC=en&LC=en&product=5063608&tmp_track_link=ot_search#N97

  HP Photo smart 5510 and 6510 e - all-in - One Printer Series - a 'connection error' or "Computer no. detected" Error Message appears when trying to Scan from the printer control panel

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02917811&lang=en&cc=us&TaskID=101&ContentType=SupportFAQ&prodSeriesId=5159859&prodTypeId=18972

  See also:

  How can I get my PC to see my Photosmart printer of 5515 via my wireless network

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/how-do-I-get-my-PC-to-see-my-Photosmart-5515-printer-via-my/TD-p/1171265

• HP Officejet Pro 8600 e-all-in-one printer - N911a (cannot control the size of the item being analyzed).

  Hi all

  HP Officejet Pro 8600 e-all-in-one printer-N911a, XP operating system. It's all new today and I'm very aware of this new stuff. (I'm older)

  My old Scanner from HP (HP Scanjet G 4010) let me resize my photos or obituaries that I put in a genealogy program. When you try to analyze recent articles in my program, in that I have a small image to the left of the page with the rest of a page 8 x 11 white.

  Is it possible to implement on this 8600 or am I missing something?  Any help or ideas appreciated.

  Thank you

  Glen

  Hi oorwill44,

  Welcome to the Forums of HP Support! I understand that you are not able to control the size of the scan, you make your HP Officejet Pro 8600. How did you install the software for your computer that is running Windows XP? How do you scan, you scan the front of the printer, or you use the HP software on the computer?

  Please take a look here: how Scan: Windows XP

  I hope this helps, let me know if you have any questions.

  Thank you

• HP Photosmart 3110 all-in-One Printer Scanner and install the HP for Windows 7 Solution Center

  Hello

  I have a printer HP Photosmart 3110 All in one with Windows XP. I bought a new computer with Windows 7. I plugged my printer HP to Win7 and now scan does not work. I need your help to install the HP Solution Center and make it work under Win7.

  There is not a download for Windows 7 on this printer. It is the only way for you to scan through paint. You will also be able to get the center of solutions is due to any software.

  THX

• ENVY 5540 All - In - One Printer: how to change the password want TO 5540 WIFI Direct from HP default to a different password?

  I try the functions on my new 5540 ENVY. Everything is set up and working correctly so far. I just printed a document from my iPad using the WIFI Direct function on the printer successfully. However, the default password on the printer for the WIFI Direct is simply "12345678". Surely, it should be replaced by a more secure password. My friend something printed its iPad - so obviously, this password is not exclusive to me, anyone can print stuff on my printer just for fun and I have a lot of students around me, the problem could become expensive for me and very boring. WIFI Direct signal covers a distance. I contacted HP telephone support, but the process is time consuming and I had to hang up because I had to work. Maybe someone here could give me instructions, and I can change the password when I have free time. I use wifi for internet (cable ethernet only) and the printer connected via USB to the computer. Also, when I turn on my computer (BUT NOT THE ROUTER) on the wireless function, the printer is and what I need to do is enter "12345678" and start printing. There is no guarantee either. Can someone tell me how to change the password for WIFI Direct 5540 envy? Thank you.

  I'm sure that you can change the EWS web page for your printer.