Acer Aspire ES1 - 331 - shield Bluelight Acer does not work

Similar Questions

• Laptop Acer Aspire 5742Z-4685. Right-clicking does not work

  I introduce myself first, I'm 70 years old, a qualified electronic former Tech at the time we could not dianose componnet level for repairs. That's some 50 years ago, when "Transistors" were the most recent thing and the best around because the slices of bread, I kept my hand in all these years now, I generally pick up or buy laptops more elders or trays of office and repair install them a decent OS used XP but now finally agreed win 7 and use more.  Once started properly I sell them to local poor people in my area for what I have in them, and sometimes even give one to someone in need.  Just my way hopefully help someone at school and maybe have a better chance in life.

  The right click button does not work on the mouse pad, as well as a usb mouse. I used Acer to factory restore disks to restore it to out of box state. Same question. If you use the control panel to switch the buttons then the only thing that happens is the cursor move no click at all.  Also after a period of rental time computer warm up suddenly the cursor works, but even the left click will not work it will highlight the icon but not allow you to click on it. I wonder is the only solution to replace the motherboard as it seems to be a worse problem of heat.  Any help would be greatly appreciated.  And before I forget, Yes, I replaced the drivers a couple of both clean install so

  RichardDaigle66,

  Looks like you did everything I thought and much more. He makes it sound like a problem with the hardware at this stage and would require the replacement of the motherboard. Looks like that the southbridge is not working properly.

• Aspire AT3-600 AR5BW222 of Qualcomm does not work

  I am running Windows 7 Professional 64 - bit. Driver does not work and can't seem to find the right driver. As a result, the wireless adapter does not work. Suggestions?

  Hi mgkassis

  I assume you looked on Acer driver support site for your AT3-600?

  I checked on the Qualcomm site, and it seems that the AR5BW222 is no longer supported. However, I found this site not official here and he claims to have drivers for Windows 7 Pro, , but for the model AR5BWB222.

  Please take precautions before downloading & installation - make sure you are fully backed up just in case of problems. When you download the file, right click and scan it with your antivirus as a precaution. There is still no guarantee, it cannot crash your system, so just be prepared!

  Otherwise, I would recommend that you update your adapter to one that is compatible and comes with its own driver wireless. They are not too expensive.

  Yet once, please take precautions if you intend to download & install the driver from the "unofficial" site

• 3.1 on my Aspire E5 - 575 G USB port does not work.

  The computer recognizes not all what I plug it into the port. My Acer initially provided with Windows 8, and now I am running Windows 10.  A driver I lost in the transition?  I tried all the updates Windows and Acer, but maybe I missed a.  Nobody else seems to have this problem on this forum.  Any ideas?

  1. disconnect your power and restart.

  2. If you are not in the version 1.15 of the Bios, download and install it.

  3. stop, shut off the power and go back, find the tiny battery reset the hole and using a paper clip, push gently into the hole until you hear a click and hold for 5 seconds. Plug in and try.

  4. go to device Manager, Bus USB controllers and click on the arrow. Right click on the USB 3.0 controller and select software update of the driver.

  5 go here http://www.acer.com/ac/en/US/content/drivers

  find your model and install the (correct for your system) chipset driver and pilot of e/s series.

• Acer Aspire ES1 - 311 touchpad does not work

  Hello world. I bought my Aspire ES1-311 just a weeks and I re-installed Windows 8.1 but the touchpad does not work. I tried to activate it with "Fn + F7" without success, I installed the drivers touchpad (on the official Acer site download page). The installer said that everything is ok, but still does not. In the configuration menu of Windows 8.1 mouse (Control Panel), Synaptics menu does not appear. On my Ubuntu disbrution, touchpad works fine without any driver. How can I fix? Thank you and happy new year

  Hello, I had the same problem I solved. Difficulty as follows: 1 Reset 2. Press F2 to enter the BIOS 3. Hand 4. define touchpad as basic (No. AHEAD!). All others should be defined as anable in hand 5. Press F10 to save the changes, I hope that this sequence to solve your problems

• DVD player does not work with Windows 10 on Acer Aspire 5553 G

  DVD player does not work with Windows 10 on Acer Aspire 5553 G. I waited for a fix of Windows a whole year now and I have tried several fixes that didn't work. Are there new solutions for this problem?

  http://community.Acer.com/T5/Windows-10/5553g-Windows-10/TD-p/375386/page/2

  

• Acer Aspire 5536 Webcam does not work with Windows Live Messenger

  My Acer Aspire 5536 laptop with built in Crystal Eye webcam does not work on Windows Live Messenger.  Open the application of webcam Crystal Eye went very well, taking pictures is fine, until I want to use it in a conversation on Messenger.  Is there something I can do?

  A quick response would be much appreciated.

  Hi Tom Hawx,.

  (1) if it works well before?

  (2) remember to make changes?

  (3) you get an error message?

  You can follow the steps mentioned in the article below to configure settings for audio\video Messenger.

  With the help of your LifeCam with Microsoft Live Messenger

  http://support.Microsoft.com/kb/921332

  (Article applies to deliver the LifeCam, works very well for the issue)

  If the problem persists always, for more expert on this issue, help post your query on Windows Live Forum.

  Windows Live Forum - http://windowslivehelp.com/

• Keyboard does not work on Acer Aspire laptop running Windows 7

  keyboard on my laptop "Acer Aspire" (Window 7) does not work. In fact, only 5 or 6 keys work at first, but when I try to use the on-screen keyboard, the keyboard does not at all not even one key... I have try several solution, but none of them can help... So, I hope that the next solution can help me... - thanks-

  Hello

  (1) since when are you facing this problem?

  (2) remember to make changes?

  This seems to be a hardware issue, contact Acer to support more specialized on this issue.
  http://support.Acer.com/us/en/default.aspx

  The following steps are worth a try:

  You can check whether your keyboard works before starting Windows. To do this, you can try to enter in safe mode

  
  Start the computer in safe mode. To do this, follow the steps below:

  Access Advanced Startup menu options by turning on your computer and pressing the button F8 continuously until Windows starts. In the boot advanced options, select Mode safe
  

  Startup options (including safe mode)

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  I would like to know if your keyboard works in safe mode.

• I have an Acer Aspire laptop with Windows 7. I have a problem. My "new folder" button does not work.

  I have an Acer Aspire laptop with Windows 7.  I have a problem.  My "new folder" button does not work when I am on a page blank and do a right click on the page I get only breifcase and no new folder option. How can I fix?

  See this thread and respond to Bruce Hagen.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/Hi-Im-having-a-problem-creating-folders/621c5cd4-29ac-4549-a80b-4f78fe3917aa

• Acer aspire 7551g Touchpad does not work in Windows

  It does not work. Any help would be appreciated.

  Hello

  It would be better asked in the Forums for answers corresponding to your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  How to ask a question
  http://support.Microsoft.com/kb/555375

  ============================================================

  Hello

  Try the system restore before that happened:

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  ---------------------------------------------------------------------------

  Check with the manufacturer support, documentation in line and/or forums (if any) in the system
  There are probably
  Shortcut keys that enable and disable the touchpad functions.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/Acer/service.do?LanguageISOCtxParam=en&CTX2.c2att1=25&CountryISOCtxParam=us&ctx1g.c2att92=447&ctx1.att21k=1&CRC=3618978704

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  ------------------------

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

• Acer Aspire V3-731 Wifi and bluetooth does not

  Hi, all of suddden I'm not able to activate wi - fi and bluetooth.

  They are greyed out, only able to activate flight mode see att.picture

  FN + F3 does not work either.

  Help!

  Kat

  I see a lot of owners of V3 - 731 having this problem. WiFi disabled and gray ut in settings. What works for many of them is stopped the laptop. Laptop start Fn and as soon as you see the logo Acer press F3.

• Acer Aspire 5315 drivers for wireless network does not

  This unit had top win7 and everything worked well. I reloaded Vista back and updated, all the drivers have shown as installed except for the wireless network, so I downloaded all the drivers of 3 of the website of Acer wireless network. Only the Atheros installed but still does not work, for the Atheros device ID is:
  PCI\VEN_168C & DEV_001C & SUBSYS_04281468 & REV_01

  The wired network connection works fine, but with the wireless, the pc icon double in the tray system, but not with the 'flowers' shows as when I connect the wired ethernet cable. The difference between when win7 was on this unit is as well the wireless connection and the dvd that worked perfect but now after reloading Vista, the Wireless does not work and the dvd also does not show as well, I had to install codecs to show him all. It's not logical, why win7 would work to perfection and not the vista which was what this unit came with?

  It's ok, I found the driver here:

  https://www.Atheros.cz/Atheros-wireless-download.php?chipset=22&system=3

  Thanks for your help.

• Graphics ATI catalyst on Acer aspire timeline 3820 tg - does not work on windows 8 (HDMI does not work)

  I have trouble with my ATI catalyst on win 8 HDMI does not work, and I am not able to download/find the right driver

  The Aspire 3820TG don't figure on our page Windows 8 Upgrade offer.

  Therefore, we do not provide drivers of Windows 8 for this system.

  You can try to find the drivers of Windows 8 on AMD Support site.

  http://support.AMD.com/us/pages/AMDSupportHub.aspx

• Acer Aspire E - 15 (E5-571-332ko) Wifi not working - Windows 7 64 BIT

  Hi there we have a problem on the machine where we have down to Windows 7 64 BIT and we picked up the drivers from the Acer Web site.

  Unfortunately the WIFI does not work despite trying all three options in the Support Site for Windows 7 64 BIT.

  The laptop originally with Windows 8.1 which we didn't like. LAN works well.

  We made - put a new SSD drive in (of course to lift the keyboard because what was not so difficult and three ribbons inside that were given.

  Can someone advise please?

  I understood the problem and got it work. I was struggling to find the right driver, is necessary to find another for a same laptop from HP! None of Acer were those on the Web site as they are all for Windows 8.1

  I went to the device under System (Windows 7 64 Bit Ultimate) Manager...

  You must go to control panel > Device Manager then highlight the network cards. The wireless is here so click on it, go to properties and then click the Details tab scroll down to HardwareIDs and make a note of the four characters that follow FRI for the vendor, and the four after DEV for device.

  Go to http://www.pcidatabase.com and enter these characters into the two boxes that apply and take the path to the correct driver. When you find the list of drivers to the seller, they aren't ordering as well use facility search to your browser to track the details of the device. With luck, you'll have an executable file, but some will be a zipped folder.

  Found this info from http://www.tomshardware.co.uk/forum/43377-43-wifi-working-acer-aspire-windows

  So the point is to track down the correct driver by searching for the device ID (first four characters) and stalking the four characters (Vendor ID) when you browse through the list.

  Hope this helps some of you.

• Acer Windows 7 upgrade kit does NOT work!

  Hi I have an Acer Aspire 5538 (4 GB of RAM and 220 GB of memory) I'm trying to upgrade to Windows (vista and both are family premium). I read elsewhere on the site that someone had the same problem as me and earasing everything on computer seemed to have worked according to your suggestions (so I did and put everything on my USB). Later, I used the "dics ghost" factory, which deletes the database from the computer to the factory settings. So I'm trying to upgrade and the first CD has worked well "Acer upgrade disc. Now, when I put in the second one it says that my pc is not compatible, and that my pc must be x 86 (32-bit) or x 64 (64-bit). I went into the "system information", and it clearly states "x 86 based PC" until I do?. The second disk named: "Windows 7 upgrade media" does not work!

  Even I am confused. Tell you what, download Windows 7 Home Premium. ISO image, burn it to a blank DVD and use your product key to install and activate it.

  Windows 7 Edition Home Premium x 64 (64-bit)

  English: http://msft-dnl.digitalrivercontent.net/msvista/pub/X15-65733/X15-65733.iso

  32 bit
  http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISO

  ImgBurn - supporting the creation of CD more. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  http://NeoSmart.NET/wiki/display/G/Burning+ISO+images+with+ImgBurn

  Download and install burn ISO Gear (free):
  http://www.GearSoftware.com/gear-ISO-burn.php

  Note: Use always slower burning (4 x or 2 x) speed is offered a choice.

  ------------------------------------------------------

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the system drive, click on remove (DO NOT remove the recovery when it exists)

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.