Acer aspire one 722 no bootable disk

Similar Questions

• Windows 7 will not update on an Acer Aspire One 722

  Hello, I have an Acer Aspire One 722 - A0722 - 64-Bit - I used the laptop and installed Windows 10 on it and it came to a crawl.  I decided to reset the computer to factory settings.  He succeeded, however, I can not install the updates of Windows.  I am running Windows 7 Home Premium with Service Pack 1.

  I tried to install updates for the first time without success and tried all the solutions I could find online.  I searched through forum after forum and tried all of the solutions that I found and not luck.  I installed several downloads, as recommended by Microsoft and not solutions.  I had subsequently to error code 8008005 and 0x8024402C and 0x8024001e.  I tried again the solutions and nothing has worked.  Most of the downloads that I did from herre: https://www.microsoft.com/en-us/download/windows.aspx

  I finally install CCleaner and updated to Explorer 11 I downloaded directly from the Microsoft Web site.  Who succeeded.  Nothing else has.

  So, I wiped out the computer again and reset to factory settings and am at square one.  I installed NOTHING else at this point expect try Windows updates.  All I get is the progress monitor to continue to operate.  It was 'running' and research updates for nearly 30 hours and nothing.  It still reads ' check for Updates ' and nothing else.

  Any help would be appreciated as I know what else to try.  This seems to be a common problem with no real solution at this moment that my search Google told me.

  Two screenshots are below.  Thank you for any help or advice.  At this point, the computer is basically unusable and it's very frustrating.  I spent hours and hours and hours and nothing.

  Thank you all and well be.    Brad

  

  

  Hello

  In fact, I found a solution that works!  I found this on another forum... Here is the solution...

  Hi I had this same problem, but it can be fixed easily, fist you need to do this update https://www.microsoft.com/en-us/download/details.aspx?i... There for 64 bit, before this, you must disconnect your wifi and LAN and uncheck the box you run internet settings where will be automatically connect when you start windows, and then restart your PC. Once the back is operational, run the update you just downloaded (make sure do not connect to the internet until the update is complete.  Reset.  Now that you have made, you must update the update here is the link to the DLhttps://support.microsoft.com/en-ca/kb/949104. Now, when it comes to restart your PC and go to update and this time it should find updates, can still take a little time, but usually get fist couple in 10 to 15 minutes.

  PS - It analyzed more than an hour before he found updates and started to download. Yes!  It worked... I also downloaded the downloads on a flashdrive from my desktop PC and installed on the Acer from the USB key.

  Thank you and well being.  Brad

• Acer aspire one 722 battery does not charge

  Original title: acer aspire one battery 722 died waiting, does not, got new battery, same thing, can't find updates for 722, pc 2 years

  Hows that for a question? I started with 2 cans and a string now its internet. I googled my problem is the button to power down for what he can "reset". The another Aspire One are updated to fix this normal, falling asleep with netbook on standby and have the battery die. I don't know how to get out my files if I can send it to the India and back. I want to go to India not my netbook! I got a new battery of the India, but that did not help. Someone at - it sort of easy for me to get my netbook to detect my battery and load as it can get? I don't know how to copy and paste so helps to show my skill level.  Thank you

  Hello

  I would suggest trying the following steps and check.

  a. turn off the laptop completely.

  b. remove the battery from the bottom.

  c. leave the battery of the laptop for 5-10 minutes.

  d. plug the adapter into the laptop (still remove the battery).

  e. turn on the system and let it fully boot in Windows.

  f. once it arrives on the desktop to launch all startup items. In other words, do not interrupt the boot process until everything is prepared.

  g so go ahead and shut down the computer normally (using the START > turn off computer method).

  h. once the system is turned off, plug the battery back in and turn on the computer.

  For reference:

  Solutions to common battery problems

  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  I suggest you to save all the data if you are able to start the computer successfully before you send the laptop for service.

  If the problem persists, I suggest you to contact the Acer Support for assistance.

  http://support.Acer.com/us/en/default.aspx

  Hope this information is useful.

• Acer Aspire one 722 / is the sound card removable or welded.

  I need to know if the card its 722 is attached to the motherboard or a plug-in.

  Audio 3.5 mm output jack is soldered on the motherboard is in most laptops and netbooks and does not have the ability to replace or change the sound card as you would on a desktop computer.  I hope this helps!

• What external optical drives are compatible with the Acer Aspire One with Windows 7 Home Premium 722

  What external optical drives are compatible with the Acer Aspire One 722 with Windows 7 Home Premium OS.  I need to make the backup disks and install the CD software.

  Thank you.

  More external ODD will work just make sure it's an external power source. This allows not to take a lot of power to the unit.

• Can I install the printer HP Deskjet 3050 (J611 series) has on an Acer Aspire one notebook without the disc

  Can I install a printer without the software disc? I have an Acer Aspire One 722 who doesn't have a hard drive. I just got an HP Deskjet 3056 A (J611 series) that only shows set up with a disk. The laptop has Windows 7 Home Premium - 64 bit OS - 2 G. Is there a way to download the software & configure the printer? I'd appreciate any help I can get. Thank you.

  Hello

  Yes, please download driver from following link (note: same for all):

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?TaskID=135&prodTypeId=18972&prodSeriesId=4311836

  Kind regards.

• I have an Acer Aspire One Netbook. (No DVD player). From the start on the hard drive, I get a black screen with a blinking cursor.

  I have an Acer Aspire One Netbook.  (No DVD player).  From the start on the hard drive, I get a black screen with a blinking cursor.  The cursor does not type.  For me, maybe I need to reinstall windows 7 and startup tasks are corrupt.  I have my product key genuine for the computer, but no way to get to windows.  How to restore windows on a netbook that won't start?

  original title: Netbook Windows 7 problem

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  Borrow a 32 bit Genuine Windows 7 friends DVD disc if you know someone who has one.

  Make an image of the DVD, you can use a program like ISO Recorder to do.
  http://alexfeinman.com/

  If you don't have a Windows 7 DVD to borrow, try to upload a picture:

  32 bit
  http://MSFT-DNL.digitalrivercontent.NET/msvista/pub/X15-65732/X15-65732.ISO

  You change the content of the. ISO file and delete the ei.cfg file. After having edited burn it to a blank DVD disc or put it on a USB key. Startup, it will reveal all editions of Windows 7, select the Starter edition. More information in the following article on how to change the file ei.cfg

  Utility delete EI.cfg allows you to use a product key
  http://Lifehacker.com/#%215438005/eicfg-removal-utility-lets-you-use-any-product-key-with-your-Windows-7-disc

  You can create a bootable USB stick with the following:
  Download Windows 7 USB/DVD tool
  http://store.Microsoft.com/help/ISO-tool

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key (this is the key of Windows 7 Starter, which would be located on the COA sticker at the bottom of your laptop)

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  They will give a confirmation ID, enter it

  Click next to complete the activation.

  Once activation is complete, enjoy yourself, make a backup of your installation of Windows 7 Starter please? You will need to do this an external hard drive, but its worth it. Because if your installation is messed up, all you have to do is to restore from a backup.

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  Once the backup is complete, you can do an upgrade to Windows 7 Professional by using the product key that you have, if it's a full key, Windows 7 Professional Anytime Upgrade retail or upgrade license key.

  Click Start, type Anytime Upgrade, follow the on-screen Wizard, enter the key of Windows 7 Professional on demand, click Next and restart your computer when you are prompted. Less than 10 minutes, you should be upgraded to Windows 7 Professional and your files and settings retained.

  Reactivate the installation, you may also do it by phone:
  Activate Windows 7 manually:
  1. click on start and in the search for box type: slui.exe 4

  2. press enter on your keyboard

  3. Select your country.
  4. Select the telephone activation option and brace yourself for a real person.

• How can I reboot an Acer Aspire One / Windows XP Home Edition Version 2002 Service Pack 3 from scratch?

  My Acer Aspire One / Windows XP Home Edition Version 2002 Service Pack 3, (laptop/netbook computer - no disk drive to insert a disk or anything like that,) only has 1 GB of memory/160 GB of storage and is far off in the ORIGINAL manner, he came, I need to start over from scratch and reload BitDefender 2011 top.  :(  I can't do it for me take MSN messenger/etc out of it, backups fail, etc..  Does anyone know WHAT to do if you can't insert "recovery disk" (no), and doing it this way?  Thank you!

  Do you know how to back up your data first? Once you do this, you can follow these instructions:

  http://support.Acer.com/acerpanam/desktop/0000/Acer/AspireE360/AspireE360faq40.shtml

  That being said, why do you do this? A clean install (or its equivalent) is rarely necessary.

• Need a link to DL Firefox 7.0.1 for linux, lang fi - FI (Finnish), to install on Acer Aspire one notebook with linpus linux.

  I got an Acer Aspire One 110 with Linpus Linux lite. Nobody has updated, so the browser to this topic is Firefox 2.0.0.14, which is a major concern for safety.

  The latest version of linux that works properly (as shown) is Firefox 7.0.1. Some people have reported problems from Firefox 8 in Linpus Lite.

  So I need to find a link where I can download this version of Firefox, in Finnish (apparently lang = fi - FI) because Mozilla has removed his breaks like a stale version.

  However, as it is the most recent version to work properly under Linpus Linux Lite (and also in view of the features of the Acer Aspire One 110), I could really use a download link for this version of Firefox, 7.0.1 in Finnish language.

  You can download it here

  • https://FTP.Mozilla.org/pub/mozilla.org/Firefox/releases/7.0.1/Linux-i686/fi/Firefox-7.0.1.tar.bz2

• Acer Aspire One D270 does not turn on!

  Have an Acer Aspire One D270. I've had for about 4-5 months now. Today it suddenly has stopped and it won't turn on. I left for a few hours but nothing yet. I thought it was a battery problem but the charging light does not turn. I know for sure, it is not the charger. Please help me! Thanks in advance!

  [Moved from comments]

  Nevermind found the solution...                                                                                                              Follow the steps below. (Please be careful when you handle the electrical components of the computer such as batteries and power adapters)

  • Remove the battery and hold the power for a few seconds (drain any remaining power)
  • Turning on the computer without the battery with the AC adapter is plugged in.
  • Wait a few seconds and then reconnect the battery

  After a few tries the computer should start normally supported. The amber battery stops flashing and turns green when fully charged.

• I use developer preview windows in my acer aspire one netbook... a job well done, but the winstore apps don't work... and I do not see my bios settings also... helpme

  I use developer preview windows in my acer aspire one netbook... a job well done, but the winstore apps don't work... and I do not see my bios settings also... helpme

  Windows Developer Preview: OS General Questions:

  http://social.msdn.Microsoft.com/forums/en-us/windowsdeveloperpreviewgeneral/threads

  The Developer Preview of Windows is a pre-beta version of Windows 8 for developers. These downloads include beta software that may change without notice. The software is provided as is, and bear you the risk of using it. It may not be stable, work properly or work the way that the final version of the software will be. It should not be used in a production environment.

  Netbook screen

  If you have a netbook with a screen 1024 x 600 Metro applications will not work. 1024 x 768 is the minimum for Metro applications.

  Several people have reported that Metro apps can be run if you connect an external display that is 1024 x 768 or more.

  You can try this modification to allow higher resolutions:

  http://www.netbooklive.com/how-to-get-better-resolution-on-your-standard-10-inch-NetBook-2772/

  BIOS - disable hybrid startup:
  http://www.sizzledcore.com/2011/04/21/enable-disable-hybrid-boot-in-Windows-8-for-faster-startup-time/

• ScanJet with acer aspire one

  I try to use my hp scanjet g3110 with my new acer aspire one.  It works very well with my old computer Tower, but with the new there was a message saying it was looking for the driver, then a message saying that the scanjet was a pilot. Any suggestions?  Thank you

  HP Scanjet G3110 drivers:

  	»	Microsoft Windows 7 (32 bit)
  	»	Microsoft Windows 7 (64-bit)

  To see if you have Windows 7 32-bit or 64-bit:

  1. Open system by clicking the Start button, right-click computer, and then clicking Properties.
  2. Under system, you can view the type of system, it will say 32 or 64 bits.

• Acer Aspire One D260 webcam does not

  My grandmother just sent me this little purple Acer Aspire One D260 about two or three weeks and just this week my webcam has stopped working for everything, how can I solve this problem?

  Hi Jordan,.

  1 Windows operating system you are using?

  2 did you recent hardware or changes to the software of the system?

  I suggest you to uninstall and reinstall the drivers for your Acer Aspire 2920 Crystal Eye and check if it helps to get the webcam working.

  Step 1:

  To uninstall the drivers of Webcam and software programs and features, follow the steps below:

  a. Click Start.

  b. in the start search box, type programs and features.

  (c) in the list, click on programs and features.

  d. check the webcam software and uninstall it.

  e. restart the computer.

  Step 2:

  Uninstall the device from Device Manager:

  a. Click Start.

  b. Select Control Panel > system > hardware > Device Manager.

  c. open Device Manager and expand the imaging device.

  d. right-click on the webcam device installed and uninstall the device.

  During the uninstallation of the device, make sure that you place a tick against 'delete the driver for this device '.

  e. restart the computer and install the latest version of the drivers of webcam and check if it works very well.

  You can check with the Acer support and install the latest version of the drivers for the webcam.

  Support of Acer & downloads

  Hope this information is useful.

• WINDOWS 7 STARTER/ACER ASPIRE ONE UPDATE HELP

  I have a brand new Acer Aspire One Netbook.  It is brand new, so after I did the initial installation for the new netbook, Windows 7 is an update.  When the update is complete, it blocks my netbook.  I get a black screen and a cursor only.  The only way I can fix it is to restore back to the factory and start all over again.  Anyone know why this is happening or that updates 62 is the cause? I basically can't update my OS until it is fixed or know where it is and it can check the updated list.

  You say you have 62 updates. The only true way to know what update is the cause of the problem is by installing one at a time.

  I was looking especially the optional updates as shows drivers etc. If you are offered drivers, you should consult the manufacturer's website to see if indeed you really need the updated drivers.

  TaurArian [MVP] 2005-2011 - Update Services

• Built in mic on acer aspire one does not

  The microphone on my acer aspire one netbook does not work. I am running windows XP on the netbook and had this problem once before some time back, but can't remember what the person tech told me to uninstall that does the job all of a sudden again. I use also the audio if it helps Realtek HD. I tried several times to update the drivers and reinstall the software from the acer site, it does not work... any suggestions?

  Hello

  Thank you for your message.

  I see that you are facing problems with the built-in microphone.

  Let's not worry! I'm here to help.

  Quick questions:

  1. what exactly happens when you use the built-in microphone? You receive an error message?

  2. What is the status of the device in Device Manager?

  Check out this link to learn more about device manager:

  By using Device Manager

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_dev_mgr.mspx?mfr=true

  Let's try the following and check:

  Method 1:

  We will adjust the volume of your microphone and check if it is set as default.

  (a) right click on the "speaker" icon located on the bottom right corner the screen of the taskbar.

  (b) click on sounds, click on the recording tab.

  (c) click Microphone, and then click Properties. (Note to make sure that this work appears under Microphone. If the job does not appear, click on Microphoneand then click set as default.)

  (d) in the Properties of the Microphone dialog box, click the custom tab.

  (e) select or clear the check box Amp Microphone .

  (f) click the levels tab.

  (g) set the slider for the volume to the desired level, and then click OK.

  (h) click on OK to close the sound dialog box.

  Method 2:

  I would also say that you update the drivers for your Microphone and looking for the issue.

  See this link for more information:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  I hope that helps!

  If you need help on this problem or any question of Windows in the future let us know.