Acer aspire problem V5-473PG

Similar Questions

• Acer Aspire problems Bluetooth M5 - 581T

  After going through the process of solving problems on my Acer Aspire M5 - 581-T, he came back with three errors, see the image below.  What should I do to solve the problem?

  

  Hello cjb2145,

  1 - check in device like this Manager:

  -Click Start

  -Type the command mmc devmgmt.msc in the box Search

  -Check the devices that have a '!. Expand, double click and write down the name and the version of the driver (Atheros or Broadcom) bluetooth

  2 - Download this driver on the Acer support website

  3. uninstall the driver in Device Manager (see #1).

  4 install the downloaded driver

  Tell me if you have Win7, 8 64-bit.

• Installation of OS V5 - 572 G Acer Aspire problem

  Hello everyone, I have a problem installing windows 7 Ultimate x 64 bit for my Acer aspire V5 - 572 G. I use flash drive(wi-drive) to install my os because there is no cd drive. First of all, I started BIOS computer Mian tab open, I changed F12 Boot Menu to "Enabled" in the start menu, I changed the start Legacy and USB HDD Boot priority mode. When I start my laptop I click F12 and it opens the start menu. It appears my Wi-Drive, but when I try to use it it charges me again to the screen where I choose to start Linpus Linux or make it bootable hard drive.

  Also, I used PowerISO to install my Windows 7 files.

  Can someone help me to install my Windows 7 laptop?

  Thanks, Lietuvis10

  Fixed now everything works fine.

  I used another drive flash Sandisk Cruiser blade and it worked fine.

  Does not work with Kingston wi-drive

• Acer Aspire problems V5-571PG

  I have Acer Aspire V5-571PG with Windows 8 single language installed and now I have 2 MAJOR problems.

  1st problem:

  Yesterday I heard that NVIDIA has released a new update (331.82 WHQL) display driver so I downloaded and tried to install it but I always get the message "Cannot install NVIDIA". I looked for a solution and tried everything I have found to no avail.

  Finally, I tried to uninstall the current driver and try to install a new one. I managed to uninstall the current driver to "Device Manager", but when I tried to install a new once again, I got the same message.

  I have downloaded the driver NVIDIA Acer Support Web of page my mobile site

  http://us.Acer.com/AC/en/us/content/drivers

  But it also gives me the same message. So, now I finished without no NVIDIA drivers for my card.

  2nd problem:

  I tried to update my Windows 8 to 8.1 Windows, so I followed the instructions here:

  http://us.Acer.com/AC/en/us/content/update-to-windows81

  I uninstalled the Intel and NVIDIA display driver you know the 1st problem that isn't already there.

  I installed all the pending important updates from Windows Update.

  I opened the store and downloaded the upgrade, but whenever he reached the phase of installation especially around 70% it stops with error code 0 x 80070003 I searched on the web about this error and I tried everything there, but nothing has worked. I tried to clear the cache of the store and he gave me some other errors.

  I found a few articles on a way around to download Windows 8.1 as ISO and use this upgrade to avoid the mistakes of store method. But this obligatory way my product key to win 8. So, I used the one for windows 8 version installed on my laptop, but he told me that this key is only for OEM versions not for more details.

  http://www.MakeUseOf.com/tag/overcome-Windows-8-1-upgrade-errors-with-a-legal-ISO-download/

  So, I would appreciate any help with a problem, but my more pressing is the NVIDIA problem.

  At this point, your easiest option is probably to restore the system to factory default load and start again.

  Recharge your Acer computer

• Acer Aspire problem Touchpad ES1-711-C231

  Hi all I recently reinstalled windows 8.1 in my laptop Acer Aspire ES1-711-C231, the touchpad worked fine before, but since the re - install is no more recognized/detected by windows 8.1. I download the device on the support page (Elantech touchpad) driver but still no joy. Help, please. What about Paul

  Hi all, problem solved had not correctly installed the driver intel I/O.

  Paul

• Acer aspire problem vn7 - 591 g nitro with high CPU and GPU temperatures

  Hello! I recently noticed some issues (lower fps) performance when you play semi demanding like cs and Overwatch, although pretty much the lowest settings. I went to download CPUID (software to monitor your hardware) to check my temperature and I noticed that I reach 90 low to high (depending on the game) when I play.

  I thought it might be dust or something inside so I removed the keyboard of the laptop part and used some canned air to remove any dust I could reach (without removing the motherboard). I also managed to get your hands on a laptop computer, cooling rack. The problem is that all these efforts really solved the problem. Just a slightly lower temperature on the GPU and about the same on the processors. I'm starting to wonder if it could be the thermal paste, which need to be replaced? I had the computer for a little over a year now. Does anyone else know similar problems? Help or advice would be appriecated.

  Hello

  The CPU and the GPU are designed to operate at these temperatures. If they are too high they will be the butterfly, and if even this does not then at some point they just instantly shut down to avoid any possible damage.

  Changing thermal paste may improve performance, but you will only get lower temperatures. Your CPU/GPU will probably run at higher clock speeds and will not throttle, but temperatures will be in the same range. But in my experience if you can change the thermal paste, you should.

  Also, you can use the laptop fan control that has the configuration for 591g and it may further increase the fan speed. I think, from the factory, the maximum speed of the fan is just about 60-70%.

  https://github.com/Hirschmann/NBFC/

• Problems with Acer Aspire V5 - 573 G UEFI?

  Hello

  I have Acer Aspire V5 - 573G. Before all the problems start I used Legacy BIOS mode with 10 Windows Pro 64 bit OS. Have the latest BIOS v2.30.

  So, recently, I decide to move from the Legacy BIOS UEFI and reinstalled Windows 10 Pro 64-bit with UEFI mode activated with the GPT partition style. Everything went well with the installation.

  Now I am facing following issues with UEFI and Windows 10 witch, which I didn't in Legacy BIOS mode:

  1. When the laptop goes to sleep and is not touched for a while, I can't wake up to laptop. Press any key on the keyboard or touch the touchpad don't wake it either. Only way is to press the Power button to stop completely and then turn it back on. I don't know if it's something to do with the Windows settings to resolve this problem.
  2. Restart Windows sometimes stop laptop computer. It's really strange... Windows shows it restarts, screen goes black and does not start, instead it laptop shutdown. ??
  3. And when I shut down the system, it is not entirely clear. Often the blue light continues to blink, CPU and GPU fans are always and still closing system entirely to press on the button / stop.

  These issues are somehow related to UEFI, because I had no such problems with the traditional mode and Windows 10. This is starting to annoy me when the laptop stops completely.

  Any help on this?

  Thank you!

  http://community.Acer.com/T5/Windows-10/Acer-Aspire-S7-stuck-in-sleep-mode/m-p/427855#M3432

  http://community.Acer.com/T5/Windows-10/aspire-V5-573G-freezes-instead-of-sleep-irregularly-not/m-p/...

• Boot Acer Aspire E1 problem

  I have an Acer Aspire model E1 Q5WPH, runnng Windows 8.  All has been well until this week when the screen started flashing random colours.

  I put the power off and then it won't start back upward.  Power seems to happen as it starts the DVD player, but then the power led goes off - then turn it back on and the process continues until I turned off the machine again.

  Is this a known problem and is there anything to do about it?

  Hello

  Check if you have the extended warranty or service plan of the store that you got of the device, which can help you save a few $s.

• Acer Aspire V5-473PG: FN + F5 has stopped working.

  Hello!

  FN + F5 of my Acer Aspire V5-473PG has stopped working. The other functions work fine.

  Operating system is Windows 8.

  Help, please. I don't know what to do.

  Thank you

  E.

  Hello

  See this topic from Acer: keyboard shortcuts does not and my shortcut keys do not work, how can I fix?

• Hi there I have an acer aspire one and I have a problem with my wireless connection.

  Hi there I have an acer aspire one and I have problems with my wireless connection.it is connected, but I can't use internet.any thoughts? Thank you

  A look at the "front" face, under the lip of the keyboard, similar to where a lock would be on a laptop. There is here a cursor that is not a lock, but it is a switch that activates / deactivates him wireless on and outside. Slide it on until it turns on the light above it (with the logo of the antenna), indicating wireless is turned on and drag it again to turn it off.

• I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  Sasha,

  What browser (exact version). ?

  Harold Horne MVP on September 24, 2012

  0x8024400a

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. on start and then click Run.

  2 copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281>

  You may be unable to access the Windows Update of Windows XP Web site.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389>

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28>

  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364>

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717>

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center.

  This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely.

  The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  FIRST: Uninstall IE8 and IE7 if they are installed. Back to all the way back to IE6. You want other patches before you get those. Reboot after doing this.

  You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

      
  

  UTC/GMT is 14:12 on Sunday, October 28, 2012

• Updating BIOS for Acer Aspire 3000 / battery problems

  So I had a couple of Acer Aspire 3000 who were not working and got one to work...

  But it seems that I am having some problems when the battery is in it - and otherwise fine without him.
  Excessively long Shut Downs that go to the continuous reboots / Touchpad problems, gel, etc.

  Says the battery until it goes to @ 7-8%.  Then the battery does not charge.

  When the power adapter is disconnected - the battery is charge?

  Given that these laptops have been sitting around for a couple / few years... and have been given to me... I do not deny the possibility that the battery is not good. And there was only 1 battery using 2 laptops.

  After that she has charged at 7-8% - I unplugged it the adapter - and it ran for @ 20 min.  and said: '1 HR 30 min remaining"until she was cut.

  I also tried tried the - remove battery unplug adapter and hold the power button for 2 min method - then installed battery and adapter - but nothing helped...

  (On a side - note, which is probably not related - my wifi doesn't seem to be working - even though it appears, it does nothing wrong in. Device Manager - and runs a diagnosis does not help...) I know there are wireless networks but none does not appear! Broadcom 802. 11 g)

  In any case - I saw a post on a different site-say an UPDATE of the BIOS could possibly solve the problem of battery - (wifi may be too)...

  Given that I've NEVER DONE an UPDATE to BIOS; I'll ask NICELY, please walk me but this... with as little as ACKRONYNS and GEEK TALK as Possible (respectfully).  I had heard of this sort of thing - to download the update of the Bios... and I think it can be put on a Falsh player - but is a ZIP and should she be EXTACTED - which I'm not too big? Then "Select (something)? and then maybe restart... So now, I'm willing to give it a try - with some help and input.  THANKING YOU IN ADVANCE!  a link for the download and the proper BIOS UPDATE would be a big departure... - I guesss that goes without saying.

  So, here are some features of the information system: (I hope there enough, but please let me know if you need more)

  

  3 to 32 of the latest BIOS availabel

  http://global-download.Acer.com/GDFiles/BIOS/BIOS/BIOS_3A32.zip?acerid=633643243476341057&STEP1=note...

  for flash, unzip the file and then read the statement in the WinPhlash SOP XP 2005.pdf file update.

• Acer Aspire 4530 coprocessor driver problems

  Hello

  I have this Acer Aspire 4530 running Windows 7 (32 bit) opportunity and it didn't gave me no problems so far.  When I boot, everything loads and works very well, but I now get an error message for the coprocessor indicating:

  The drivers for this device are not installed. (Code 28) There is no driver selected for the item or a set of device information. To find a driver for this device, click Update driver.

  (Location: PCI bus 0, device 1, function 3)

  When I pick up my hard drive, and the www, it can't find the drivers.  I'm at a standstill.  My laptop still works and all the programs run very well, but if I'm supposed to have a driver installed for the coprocessor, so I want to install it.  Any help would be greatly appreciated.  Thank you

  You must install the chipset driver Nvidia from here: http://www.acer.co.uk/ac/en/GB/content/drivers

• Acer aspire switch v10 wifi problem.

  Hello

  I'm sorry if this has been asked before but I looked and that you can not see this problem.

  My friend got an Acer Aspire switch V10 from the EA Store with mobile internet, but want to connect Wifi too when shes at home.

  The problem is that there is no option for Wifi everywhere where I can see. My laptop Windows 10 in the Notifications Panel and the subnet in the settings. But these are not? How to connect to a Wifi network?

  Thanks for any help you can give and, hopefully, im missing not only something

  Welly

  It is possible that it is, for some reason, got the wireless off. There is a press of button (Fn - F3 on this laptop, may vary on the switch) which enables / disables wifi on and outside. In addition, you can toggle the wifi device in network and sharing Center, go to edit the card settings. If it does not then it is possible that the driver is corrupted or missing, open the Device Manager and look for whatever it is reported as a problem. Finally, it is possible, that there is a hardware problem in which case it will not show anywhere. This requires a trip to the repair depot.

• Installation problem Windows 10 on Acer Aspire V5 - 573G

  I have acer aspire V5 - 573G, I tried to install Windows 10 on my computer using the USB. I started on USB, format hard drive and tired to install it, but he gave me error "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. "Error code: 0x800701E3".

  After a search on the internet I found that you must upgrade to Windows 10 windows 8.1 and shouldn't have installed live. Then I installed windows 8.1 pro, then I went to upgrade to Windows 10 but after a while the update failed and rolled back to the previous version of windows and it showed the error 'the installion failed in the FIRST_BOOT expression with an error during the operation BEGIN_FIRST_BOOT'.

  Please help, how do I install windows 10.

  Finally that my problem has been resolved.

  I changed the SATA from AHCI RAID mode and that worked for me.

  But now I have new problem that is whenever I start my computer laptop blue screen of Death (BSOD) occurs. Not every time but often. Whenever he gives a new error. Some errors are...

  • Unmountable_Boot_Volume
  • Kernel_Data_Inpage

  Any suggetions?