Installation of OS V5 - 572 G Acer Aspire problem

Similar Questions

• How to repeat the installation of Windows XP on my Acer Aspire One?

  How to repeat the installation of Windows XP on my Acer Aspire One? I have the key but I can see that the version of the Windows because label is damaged. They do not protect the foil label. Where can I download the windows installation? Thanks for your replies!

  Hi Luka Vetma,

  Windows XP is not available for download and it is no longer supported.

  You can contact the computer manufacturer to restore Windows XP on your computer or you can install Windows 7, for more information, see the links below

  Acer Support link

  http://support.Acer.com/us/en/default.aspx

  Purchase Windows 7

  http://www.Microsoft.com/Windows/buy/default.aspx

  10 reasons to buy Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/products/10-reasons-to-buy-Windows-7

  Installation and reinstallation of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Note: It is recommended to backup your important data, before performing any installation of Windows.

• Acer Aspire problems V5-571PG

  I have Acer Aspire V5-571PG with Windows 8 single language installed and now I have 2 MAJOR problems.

  1st problem:

  Yesterday I heard that NVIDIA has released a new update (331.82 WHQL) display driver so I downloaded and tried to install it but I always get the message "Cannot install NVIDIA". I looked for a solution and tried everything I have found to no avail.

  Finally, I tried to uninstall the current driver and try to install a new one. I managed to uninstall the current driver to "Device Manager", but when I tried to install a new once again, I got the same message.

  I have downloaded the driver NVIDIA Acer Support Web of page my mobile site

  http://us.Acer.com/AC/en/us/content/drivers

  But it also gives me the same message. So, now I finished without no NVIDIA drivers for my card.

  2nd problem:

  I tried to update my Windows 8 to 8.1 Windows, so I followed the instructions here:

  http://us.Acer.com/AC/en/us/content/update-to-windows81

  I uninstalled the Intel and NVIDIA display driver you know the 1st problem that isn't already there.

  I installed all the pending important updates from Windows Update.

  I opened the store and downloaded the upgrade, but whenever he reached the phase of installation especially around 70% it stops with error code 0 x 80070003 I searched on the web about this error and I tried everything there, but nothing has worked. I tried to clear the cache of the store and he gave me some other errors.

  I found a few articles on a way around to download Windows 8.1 as ISO and use this upgrade to avoid the mistakes of store method. But this obligatory way my product key to win 8. So, I used the one for windows 8 version installed on my laptop, but he told me that this key is only for OEM versions not for more details.

  http://www.MakeUseOf.com/tag/overcome-Windows-8-1-upgrade-errors-with-a-legal-ISO-download/

  So, I would appreciate any help with a problem, but my more pressing is the NVIDIA problem.

  At this point, your easiest option is probably to restore the system to factory default load and start again.

  Recharge your Acer computer

• Acer Aspire problems Bluetooth M5 - 581T

  After going through the process of solving problems on my Acer Aspire M5 - 581-T, he came back with three errors, see the image below.  What should I do to solve the problem?

  

  Hello cjb2145,

  1 - check in device like this Manager:

  -Click Start

  -Type the command mmc devmgmt.msc in the box Search

  -Check the devices that have a '!. Expand, double click and write down the name and the version of the driver (Atheros or Broadcom) bluetooth

  2 - Download this driver on the Acer support website

  3. uninstall the driver in Device Manager (see #1).

  4 install the downloaded driver

  Tell me if you have Win7, 8 64-bit.

• Acer Aspire problem Touchpad ES1-711-C231

  Hi all I recently reinstalled windows 8.1 in my laptop Acer Aspire ES1-711-C231, the touchpad worked fine before, but since the re - install is no more recognized/detected by windows 8.1. I download the device on the support page (Elantech touchpad) driver but still no joy. Help, please. What about Paul

  Hi all, problem solved had not correctly installed the driver intel I/O.

  Paul

• Acer aspire problem vn7 - 591 g nitro with high CPU and GPU temperatures

  Hello! I recently noticed some issues (lower fps) performance when you play semi demanding like cs and Overwatch, although pretty much the lowest settings. I went to download CPUID (software to monitor your hardware) to check my temperature and I noticed that I reach 90 low to high (depending on the game) when I play.

  I thought it might be dust or something inside so I removed the keyboard of the laptop part and used some canned air to remove any dust I could reach (without removing the motherboard). I also managed to get your hands on a laptop computer, cooling rack. The problem is that all these efforts really solved the problem. Just a slightly lower temperature on the GPU and about the same on the processors. I'm starting to wonder if it could be the thermal paste, which need to be replaced? I had the computer for a little over a year now. Does anyone else know similar problems? Help or advice would be appriecated.

  Hello

  The CPU and the GPU are designed to operate at these temperatures. If they are too high they will be the butterfly, and if even this does not then at some point they just instantly shut down to avoid any possible damage.

  Changing thermal paste may improve performance, but you will only get lower temperatures. Your CPU/GPU will probably run at higher clock speeds and will not throttle, but temperatures will be in the same range. But in my experience if you can change the thermal paste, you should.

  Also, you can use the laptop fan control that has the configuration for 591g and it may further increase the fan speed. I think, from the factory, the maximum speed of the fan is just about 60-70%.

  https://github.com/Hirschmann/NBFC/

• Acer aspire problem V5-473PG

  Hello good day...
  I would like to ask if thise 8 gb ram memory is compatible with my laptop
  DDR3 PC3-12800 8 GB unbuffered NON ECC 1.35v 1024Meg x 64

  Need your expert opinion.
  Due to problems of DDR3 RAM with Rams DDRL...
  If you have any authorized seller of the rams said memory here in the Philippines...
  Thanks a lot guys

  Thanks a lot @laurent_14

• Acer Aspire switch 10 - Boot USB / Windows 8.1 installation of USB

  Hello
  I recently bought Switch 10. As it has only 32 GB SSD cut into 24 GB of windows and 8 GB partition for recovery, I tried to merge these partition to get rid of the recovery and have only a single partition SSD. Longbstory short, I failed and got a blue screen, then a restart and now I have this:
  http://i.imgur.com/NmAkhgO.jpg

  I have Windows 8.1 the official site of Microsoft, I have orginal CDkey (not OEM Acer's). The version I downloaded is a 32/64-bit Installer (I think, but it can be 32-bit only)
  I tried to configure the BIOS by myself, but it always puts me the blue screen of windows (with error 0000225).
  I provided the BIOS with the default settings screens: http://imgur.com/a/jtyN2

  I prepared the USB stick to a .iso image with a program called Rufus, GPT partitioning system.

  Then I changed the BIOS settings to allow non-secure startup and boot from USB HDD first, and when you start, I hit F12. But I still get that: http://imgur.com/yE48diG

  -What would I do? Be able to start Windows 8.1 installator, clear all partitions on SSD and make sure that you have a 32GB with windows.
  -What I need? Help, because I can not boot from USB and run Windows 8.1 installator.

  I found the solution, everything works fine.

  To do this, you must keep two things in mind:

  1. you may not use Microsoft official .iso for the USB program - it does create a bootable USB stick for UEFI bios, the official downloader for Windows have the ability to create USB bootable .iso downloaded, but it is not able to do.

  You must create bootable ISO using software of Rufus (type simpy rufus in google or LINK), then all you have to do is to make sure that you have selected GPT partition scheme for your bootable usb key and the FAT32 file system.

  2. the most improtant thing which is our Acer Aspire Switch 10 supports ONLY 32-bit Windows, just all the instalators Windows that contains the version 64 bits are wrong. Conclusion is simple, you need only 32 bits instalator, the 32-bit/64-bit custom works (like only instalation of 64-bit that is obvious)

  Hope this has helped.

• Installation problem Windows 10 on Acer Aspire V5 - 573G

  I have acer aspire V5 - 573G, I tried to install Windows 10 on my computer using the USB. I started on USB, format hard drive and tired to install it, but he gave me error "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. "Error code: 0x800701E3".

  After a search on the internet I found that you must upgrade to Windows 10 windows 8.1 and shouldn't have installed live. Then I installed windows 8.1 pro, then I went to upgrade to Windows 10 but after a while the update failed and rolled back to the previous version of windows and it showed the error 'the installion failed in the FIRST_BOOT expression with an error during the operation BEGIN_FIRST_BOOT'.

  Please help, how do I install windows 10.

  Finally that my problem has been resolved.

  I changed the SATA from AHCI RAID mode and that worked for me.

  But now I have new problem that is whenever I start my computer laptop blue screen of Death (BSOD) occurs. Not every time but often. Whenever he gives a new error. Some errors are...

  • Unmountable_Boot_Volume
  • Kernel_Data_Inpage

  Any suggetions?

• Carriage of aftermarket for Acer Aspire E1-572-6676

  Hello I would like to install a 2nd hard drive where it should be a cdrom in my Acer aspire E1-572-6676

  There is a plastic tray, but it is not designed to receive a HDD (designers should think about scalability).

  But I see two small connectors at the other end of the slot, would they be msata ports?

  What can I use as a caddy hard drive to put a 2nd SATA not msata HDD?

  You need something like this:http://www.ebay.co.uk/itm/like/390822753540?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=1...

• Acer Aspire 572 E1 NIC

  Hello

  I had my computer Acer Aspire E1-572 some time in 2014 and it was very good for my use in photo retouching and such, it can be a little slow at times but otherwise works relatively well. It is a model with intel i7, so I really had high expectations for it, but recently it has me pushed beyond edge of frustration. The internet is catastrophic.

  First, I should probably point out that I'm absolutely useless when it comes to computer jargon. I did my research, read works around the problem but have not yet found anything that solved my problem with certainty or was possible for me to understand, and still less to make. I am nowadays primarily a mac user and windows 8.1 is my idea of a nightmare. However, I like to use the Acer now and then, more recently, I can't really leave this issue continue, otherwise, I'm sitting here with an expensive computer that is really more hassle that it is worth.

  My Internet home works well for other devices and it is not a problem that Acer does not have wi - fi, it is, nice and clear, but untilising it is almost impossible. 3/5 bars of internet so I expect at least some kind of feedback from her. It will sort of blow along some time, then load, then work stoppage or just simply load at all. For this, many people model seems to go configuring power management settings, I did and there was maybe a bit small (?) improvement but I wasn't definitely jumping for joy. The internet is still a step forward, two steps back. All the other advice just went straight over my head, it means nothing to me.

  It is difficult to recall that it was never my computer "navigation", but I don't think when I got it, I don't have this problem. He could not have won races of speed, but this actually worked. I was wondering if maybe the 8 to 8.1 windows update had thrown a key in the works, but this is speculation on my part.

  I then come to the drivers, I wondered if that was the question that a lot of people mention it in various forums. Similarly, I don't know about this. I used the search for drivers acer to find compatible drivers for my model:

  Wireless LAN: Atheros (Wireless LAN Driver - Driver WLAN + BT) Version 10.0.0.285

  Wireless LAN: Atheros (wireless LAN driver) Version 10.0.0.263

  Wireless LAN: Atheros (Wireless LAN Driver - Driver WLAN + Bluetooth) Version 10.0.0.263

  Wireless LAN: Broadcom (wireless LAN driver) Version 6.30.223.170

  Great... except that I don't know that I need (or if I need them at all) what to download and what to do with it when I went through the laborious download process.

  I don't want to take it back to the store, it's always a huge concern, and I hope that it is something that can actually be fixed at home.

  Any help would be sincerely appreciated (especially if it's something that I can understand) that I'm close to despair with the accursed thing!

  Thank you.

  Try this Acer support:

  http://global-download.Acer.com/GDFiles/driver/wireless%20LAN/wireless%20LAN_Atheros_10.0.0.285_W81x...

  Furthermore, the other link has a newer driver and I suggested that the Web site of many users without worries.

• Please tell how to enable access to the Advanced BIOS - Acer Aspire E1-572

  Hello

  I recently bought an Acer Aspire E1-572 and come to find out that the BIOS has little information available.

  I need access to advanced options for virtualization support and would like to know how I can do this.

  Acer provide an update of the BIOS for this?

  Thanks a lot for your help.

  Ian

  Hello...

• help please, acer aspire R7 - 572 to very short range of wifi.

  I have my 2 month old acer aspire R7 - 572, my wifi speed is ok, but you must close to the router. Wifi problem is very short range, any suggustion to help me.

  You can search for "Aspire R7-572 Wifi card Issues" of this forum and see if this helps. There are some good suggestions.

• Wireless connection drops after 10-20 seconds on Acer Aspire V3-572 - 56T 3 running Windows 8.1

  I have big problems with the network connection Wireless at the office. He sees the network, allows me to enter security credentials, then connects (with connectivity internet confirmed) but gave up after 10-20 seconds. I tried the wireless network to a friend who worked ok without interruption, is certainly nothing wrong with the hardware. I use a brand new Acer Aspire V3 - 572 - T 56, 3 on Windows 8.1, with all the latest drivers/patches loaded and tried to juggle with many advanced settings for the card of network without success. I connected the router to make sure that all the settings, encryption standards, channels etc was corresponding, but the problem is persistent. It has been going on for two days now and is driving me crazy because I really need to work in the office with wifi band. Plug an ethernet cable directly into the router works fine, but it is not the ideal solution (and poses a danger OH & S that he throws on the ground). Can someone help pleeeease!

  FYI, I ran diagnosis several times & the only thing that stands out was the following:

  Diagnostic information (wireless connectivity)
  The Association status: 0 x 00038002 failure
  Association reason code: 0x00000002

  Result of diagnosis: problem found
  Question: RNWF MSM Helper Class
  Root cause: Windows could not connect to "ERICSSON".
  You can try to connect again.

  Result of diagnosis: problem found

  Root cause:
  Failed to bind wireless to "ERICSSON".
  An answer is not from the router or access point.

  Detailed root cause:
  Failed to bind to this network wireless. Windows has not received response from the router or access point wireless.

  Repair option:
  Search for the causes of the low wireless signal quality
  The signal is weak because of the distance or interference.
  Windows Help and Support can provide more information on this problem.

  No need, already has the solution (which worked for me):

  The fix!
  (This is for windows 8.1)

  THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

  -Right click on the Windows tile in the bottom left of the taskbar.
  -Open Device Manager.
  -Expand "network adapters."
  -Right click on your "Broadcom 802.11n Network Adapter.
  -"Update driver software".
  -"Browse my computer for driver software".

  THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

  -"Let me pick from a list of drivers for devices on my computer.
  Uncheck "Show compatible hardware".
  -Scroll down on the "Manufacturer" for "Broadcom" Panel and select
  -Scroll down on the "network card:' and find"
  "Broadcom 802.11 Multiband Network adapt."
  -Select, and then click "next".

  THIS bcm94313hmg2l IS ONLY for WINDOWS 8.1 and Broadom.

  -Say yes to the "put to update driver Warning"
  -Close and you should be able to connect with elegance.

• Acer Aspire S7 392 does not start after the new Antivirus installation

  Hello

  I bought the Acer Aspire S7 392 in October this year of digitec.ch AG here in Switzerland. Everything worked well until December 19 when my Antivirus McAfee has expired and I decided to change my Comodo Internet Security antivirus. A month back, I had installed Windows 8.1 as well and things were smooth until last night. Last night, when I installed Comodo Internet Security, the computer requires a restart, I did, and then my computer erased. I could not even reached the Acer logo at startup.

  As I tried to check the observation of details of covers them this white screen problem, Irealized that many people suffer from a similar problem. It seems that Windows 8.1 and an installation of a new antivirus may have led to this white screen problem. In addition, it seems to be a bios problem that the computer would not start and I hope that someone could help me with this problem.

  Thank you very much Acer-Tommy. I had to take it to the Acer Support in Switzerland. He partially solved the problem. My S7-392 has a built-in battery that I had to reset which allowed the laptop to reboot normally. As in, I was able to boot up to Windows 8.1. However, as soon as I logged into Windows, it hooked up soon. Do the restart 3 times triggered the automatic repair/update option. That I took and returned to Windows 8. I had a Bios 2.05 2.03 intead and I had to install 2.05 before making updates. I recommend you seriously all the people who use the S7-392 to strictly follow the installation procedure for Windows 8.1 mentioned on the Acer site.

  Please update your Bios to 2.05 before installing something new, especially a new anti-virus.