Acer Aspire R7 stuck in the diagnosis of the PC / had media failure before you start.

Similar Questions

• Acer aspire one stuck to the charger page

  My netbook gets as far as the windows loader page. The keyboard is unresponsive, as are the usb ports. None of the forum answers work so much they seem to assume that the keys work

  Hello

  all I can suggest is F8 at startup to boot options

  or Alt + F10 at startup start you the process of recovering back to factory settings

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the keys Alt and F10 repeatedly.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the system recovery application is loaded, follow the instructions to reinstall the operating system.

  but you say that no keys don't work

  I suggest you contact acer

  http://support.Acer.com/us/en/default.aspx

• [NEED HELP] Acer B1-730HD stuck on the USB logo

  After update my Acer B1-730HD kitkat... The problem seen is dat what acer B1-730HD stuck on the USB logo. I'm looking for solution on google for a few days to view, not yet found how flashing a rom for Acer B1-730HD. I am very disappointed with your service as acer do not DOWNLOAD on the Web site's original rom. Now, I need original rom for Acer B1-730HD, please!

  Sorry to hear that you have this problem after the update of your tablet.

  You try to run a factory data reset.

  1. Turning off the tablet.
  2. Press and hold the Volume up button, which is located closer to the touch screen lock switch.
  3. With the Volume up button which is held, press in and hold the Power button for 3 seconds, then release it. Continue to hold the Volume up button.
  4. Once the tablet screen lights up, release the Volume up button.
  5. In the select the Boot Mode screen, select [SD picture Mode of update]. Use the Volume and Volume keys to navigate through menus and use the power button to select the desired option.
  6. On the Android system recovery screen, select wipe data / factory reset.
  7. When you are prompted to confirm deletion of all user data, select Yes - delete all user data.
  8. On the Android system recovery screen, select reboot system now. Your data will be erased.
  9. Your tablet will restart and go to the Welcome screen. Follow the steps on the screen to configure your tablet.

• When I start my PC, and before you start I receive this message from InfoCenter.exe - Application error - the application is not initialate properly (0xc0000135).

  Original title: initialize 0xc0000135

  When I start my PC, and before you start I receive this message from InfoCenter.exe - Application error - the application is not initialate properly (0xc0000135). I just click OK and continue. Any problem? Is this necessary application?

  Walter Rodriguez

  E-mail address is removed from the privacy *.

  10/07/12

  14:57

  Hello

  1. do you receive this after you see Start button or entry?

  2 have you made any changes to the computer before the show?

   

  Method 1: Boot errors are fixed by the clean boot.

  Perform the clean boot and see if that helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  Reference: How to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

   

  Method 2: Some malware parody itself as InfoCenter.exe, especially when it is located in the folder c:\windows or c:\windows\system32.

  I suggest you make a system full scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  , Note 1: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note 2: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• the upgrade of windows 8 at 81, will be hp support assistant update drivers before you start

  I recently bought fancy m7 j020dx 17 running windows 8, I thought it would make more snse upgrade to windows 8.1 before I install other software and other.  It's not not clear to me if hp support assistant will detect if the drivers I have are all of this to date.  can anyone tell me for sure?  Thank you!

  KevinOr

  Do not use HPSA to 8.1 Windows Installer driver, many system had an accident with the update of the Bios on HPSA

  Download the Bios and the driver manual

  before you start the windows 8.1 update

  Uninstall the Virusscanner and install the new Bios

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp65000.exe

  Download the other drivers from here

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=5447327#N2074

  If you have a problem after installation

  Delete restart driver Intel HD and install the new

  Read the instructions of Windows 8 to 8.1

  http://support.HP.com/us-en/document/c03847367

• LDIF syntax error: what is the reason of this failure when you try to import the new user

  What is the reason of this failure when you try to import the new user, followed the book syntax

  C:\Users\Administrator\Documents>ldifde-i f Newusers.ldf
  Connecting to "practice01.testa01.com".
  Registration as current user using SSPI
  Import directory of the file "Newusers.ldf".
  Loading entries.
  There is a syntax error in the input file
  Failure on line 3.  The last token starts with 'C '.
  0 entries modified with success.
  An error has occurred in the program

  Hello

  The question you have posted is related to LDIFDE with Active Directory in a domain environment, and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

  http://TechNet.Microsoft.com/en-us/default.aspx

• "You must format the disk in drive g before you can use it"

  "You need to format the disk in drive g before you can use it... "Really crappy to get Msg. I have a Corsair 16 GB FAT drive. I got the disc from my Vista computer and go to a XP machine safely. Aaarrrggghhh!

  New tips on how to solve this problem?

  When you say fat, do you mean exfat?

  If you have the disk formatted exfat format, you may need to update xp so as to be able to read,

  article following the base of knowledge may help you.

  http://support.Microsoft.com/kb/955704

  good luck keep us,

• Vista System Restore does not work. I disable Norton Antivirus before you start the process. What can I do else?

  Vista System Restore does not work. I disable Norton Antivirus before you start the process. What can I do else?

  1. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  2 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• Can (must) I apply all current patches to the newly installed instance of EMP 11.1.2.1 release before you start to configure it?

  Can (must) I apply all current patches to the newly installed instance of EMP 11.1.2.1 release before you start to configure it?

  Hello

  First, you configure the new instance and check if it works well. Then apply patches, following the patch readme. Patches usually does not require a full configuration.

  Thank you

  KK

  ~ Mark answer if its helpful.

• How guys do you overcome (Mac Book and iMac) screen sizes with disabilities when creating scrolling effects, can work the same on both screens when you started with the iMac?

  How guys do you overcome (Mac Book and iMac) screen sizes with disabilities when creating scrolling effects, can work the same on both screens when you started with the iMac?

  Technically, since it's the same effect with the same settings, it works on both sizes. However, you need to test both is to decide if it will appear visually correct on both screens or not. On screens more wider/taller objects can appear earlier on the screen, it is advised to test again on both screens.

  See you soon,.

  Vikas

• ACER ASPIRE 471 - E1: UPDATE THE BIOS CRASH

  HELLO, I NEED HELP ON THIS.

  I WAS updating THE BIOS ACER ASPIRE E1 - 471 VERSION 2.11 to 2.18 BUT GOT IN FAILURE, WITHOUT NORMAL MORE to IGNITE.

  WHEN UPDATING THE FILE ORIGINAL WITH THE HELP OF THE ACER SUPPORT WEB SITE, RESTART THE LAPTOP TO WINDOWS POWER ON A BACK PAGE AND DISPLAY IT ON THE SCREEN...

  UPTATING:

  TRUE BIOS VERSION: ZQS 2.11

  NEW VERSION OF BIOS: ZQS 2.18

  PROGRESS...: 0% AND SCOPE WITH A 100% SUCCESS

  AFTER THIS, THE LAPTOP REBOOT AGAIN AND POWER BLUE LED LIGHTS UP BUT NO SCREEN...

  AT THE START OF THE LAPTOP, HARD DRIVE MAKING NOISE OF POWER ON AND.

  NO SCREEN, THE COMPUTER PHONE IS FREEZE.

  ON THE BACK THE INFORMATION OF THIS LAPTOP, THE BOOK SAYS:

  Aspire E1-471-6683

  MODEL NO.: ZQT

  .....

  SNIDS: 31300078979

  So Original BIOS was ZQS but the model said ZQT?

  I have not found a repair for this model, so cannot move too much by myself.

  I found some instructions on the use of USB with the FCN + ESC + Power Buttom combo...

  The use of files with. FD extension inside the USB key.

  I tried 1 for the test and the thing happens as users said.

  Power Led flashes, USB Stick will blink for a few seconds, and then restart laptop.

  BUT STILL FREZZY.

  I think I use the wrog. FD file.

  ACER support website has none. This model in the FD file (or any other type of file, hit. EXE, a)

  You can with ACER Support me?

  Thanks, it is a client of the portable computer of mine, I'm kind of scared at the moment.

  OK, thanks for the reply.

  I got the sollution and will share with you now.

  [edited to conform to the guidelines]

  YOU WILL NEED TO FORMAT A USB STICK WITH FAT (16) PARTITION STYLE.

  -------

  NOW, THE SECRET OF. FD FILE

  YOU MUST PUT IN THE USB THIS FILE WITH THE EXTENSION. FD, BUT THE ACER DOWNLOAD SITE IS ENOUGH. EXE TO THE INSTALLATION, SO YOU GO ON ANOTHER COMPUTER (INCOMPATIBLE WITH ASPIRE E1 VERSION) AND RUN THE FILE...

  YOU RECEIVE AN ERROR MESSAGE, BUT NOT CLICK NOW ON ANY BUTTON.

  NOW, OPEN WINDOWS EXPLORER AND GO TO C:\USERS\(USER ACCOUNT)\AppData\Local\temp\7zS4F0C.tmp

  INSIDE THIS FOLDER, YOU CAN GET THE ST. FD FILE (PERHAPS ZQS.) FD)

  THAT COPY ON USB KEY AND CLOSE THE ERROR MESSAGE. (FOLDER WILL DISAPEAR AFTER THAT)

  WITH THE FILE INSIDE OF THE SECONDARY KEY, FOLLOW THE MANUAL INSTRUCTIONS.

  BASICALLY:

  Steps for the USB storage device BIOS recovery

  To create a crisis USB key, perform the following steps:
  1. format the USB storage drive using the Quick Format option.
  2. save the ROM file (filename: ZQS.fd) in the root directory of the USB storage device. Make sure that there are no other file BIOS stored in the same directory.
  3. plug the USB storage on USB device.
  4. press the button, then connect power cable.
  5. the power button flashes once.
  6. press the Power button to start the CRISIS of the system mode.
  7. when the CRISIS is over, the system auto restarts with a possible BIOS.

  AFTER THAT

  8. update the latest BIOS version for this machine of normal BIOS flashing process.

  YOU MAY HAVE ANOTHER PROBLEM LIKE ME, AFTER RECOVERING FROM CRISIS, BIOS NOW SEE THE ANY HARD DISK, SO YOU MUST UPDATE THE BIOS AGAIN WITH THE HELP OF ANOTHER TOOL LIKE HIRENSBOOT HELP FIXITURE MINI_XP.

  BUT IT IS ANOTHER CONVERSATION.

  THANKS FELLOWS.

• Acer aspire can't load the Windows operating system

  Acer Aspire V5 PG 471 refers to starting a black screen with the message "operating system ' not found after upgrade from 8.1 to 10 Windows failure. The road to recovery key F2 does not work (the button not responding).

  Is there a solution to this?

  Follow the instructions on the link I posted.

• Can I install the printer HP Deskjet 3050 (J611 series) has on an Acer Aspire one notebook without the disc

  Can I install a printer without the software disc? I have an Acer Aspire One 722 who doesn't have a hard drive. I just got an HP Deskjet 3056 A (J611 series) that only shows set up with a disk. The laptop has Windows 7 Home Premium - 64 bit OS - 2 G. Is there a way to download the software & configure the printer? I'd appreciate any help I can get. Thank you.

  Hello

  Yes, please download driver from following link (note: same for all):

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?TaskID=135&prodTypeId=18972&prodSeriesId=4311836

  Kind regards.

• My Acer Aspire 5630 has lost the Bluetooth feature

  My acer aspire 5630, windows vista edition Home premium, has a bluetooth switch that to 1 hour would be turn on/off the bluetooth on the computer, for some reason, is no longer works so I have now a bluetooth dongle, only thing is, also, it won't work, it installs everything except the bluetooth device. I do not have the disk, that he asks, and by searching online, I get the message, consult the manufacturer of your device? Help, please

  Original title: bluetooth nightmare

  Hello

  Were there any changes made recently to the computer?

  Try the following steps.

  The problems with Bluetooth devices: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-Bluetooth-enabled-devices

  Change settings for a Bluetooth compatible device: http://windows.microsoft.com/en-US/windows-vista/Change-settings-for-a-Bluetooth-enabled-device

  Uninstall the Bluetooth device, restart the computer and install the latest drivers.

  You can even check the link, which will set the Blue tooth device: point of Bluetooth in Control Panel on a Windows Vista SP2 does not work as expected when you click the http://support.microsoft.com/default.aspx/kb/960531 element

  Contact Acer here support: http://support.acer.com/us/en/default.aspx

  Hope this information is useful.

• Acer Aspire laptop, which exceeded the drivers

  I have acer Aspire laptop that I bought in November. Now he says I have 6 obsolete drivers in the driver manager. is it possible to get these updates without having to pay for them. and he said that they were obsolete 2006. How can they put a pilot in a laptop. When it was out of date when they put it in the laptop.

  These third-party driver finder programs are useless, often provide incorrect drivers and eventually may cause your system to malfunction.

  Uninstall and any third party "SpeedUpMyPc" / optimize program have installed you may

  Drivers for innovative systems are freely provided by that PC manufacturer, no where else, including windows update, only, at least that the manufacturer of your PC (Acer) States that pilots must be obtained via windows update