Similar Questions

• Need help, definition 3d solid - stuck on the roof

  I'm trying to define a 3d solid to represent a simple building with a roof, as shown in this image. I'm working through the examples of the [space Developer Guide | http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28400/sdo_objrelschema.htm#CBBGAJFH]
  ] .
  My plan is to define the main part of the building in the form of solid with 6 surfaces. This part works fine. Then, I want to define the structure of the roof in the form of solid with 5 surfaces. Then, I'll use SDO_UTIL. ADDED to put it together.
  
  I'm stuck on the roof!
  
  There are 5 areas:
  -the base of the roof (A)
  -the first slope of roof (B)
  -the first sprocket (C)
  -the second slope of the roof (D)
  -the second gear (E)
  See image here.
  So I defined as follows:

  INSERT INTO geometry_examples (name, geom) VALUES
  (
    'Roof of house',
    SDO_GEOMETRY
    (
      3008,             -- SDO_GTYPE set to 3008 for a Simple Solid
      NULL,             -- No coordinate system
      NULL,             -- No data in SDO_POINT attribute
      SDO_ELEM_INFO_ARRAY(
        1, 1007, 1,          -- Descriptor for a single solid 
        1, 1006, 5,          -- 5 composite surface elements
                      -- element triplets to follow
        1, 1003, 1,     -- bottom of the roof - i.e. the flat bit (rectangle)
        6, 1003, 1,     -- east roof slope (rectangle)
        11,1003, 1,     -- north gable end (triangle)
        15,1003, 1,     -- west roof slope (rectangle)
        20,1003, 1      -- north gable end (triangle)
      ),
      SDO_ORDINATE_ARRAY
      (
       4,0,2, -- bottom of the roof (rectangle) Surface A
       4,2,2,
       2,2,2,
       2,0,2,
       4,0,2,
       4,0,2, -- east roof slope (rectangle) Surface B
       4,2,2,
       3,2,4,
       3,0,4,
       4,0,2,
       4,2,2, -- north gable end (triangle) Surface C
       2,2,2,
       3,2,4,
       4,2,2,
       2,2,2, -- west roof slope (rectangle) Surface D
       2,0,2,
       3,0,4,
       3,2,4,
       2,2,2,
       2,0,2, -- north gable end (triangle) Surface E
       4,0,2,
       3,0,4,
       2,0,2
       )
    )
  );

  But when I validate I get:

  SQL> select SDO_GEOM.VALIDATE_GEOMETRY_WITH_CONTEXT(geom, 0.005) 
  from geometry_examples;
  
  SDO_GEOM.VALIDATE_GEOMETRY_WITH_CONTEXT(GEOM,0.005)
  ------------------------------------------------------------------------------------------------------
  13355 Point:0,Edge:0,Ring:0,Polygon:0,Comp-Surf:0,Solid:0,Multi:1,

  Any ideas where I'm wrong here?

  Hi Reggie.
  13355 error means that sdo_ordinate_array is not grouped by number of dimensions grouped due to bad indices in your elem_info_array. I tried the following:

  SDO_GEOMETRY
  (
  3008,-SDO_GTYPE 3008 for a Simple solid value
  NULL,-no mark
  NULL, no data in the attribute SDO_POINT_TYPE
  () SDO_ELEM_INFO_ARRAY
  1, 1007, 1,-descriptor for a single solid
  1, 1006, 5,--5 composite surface elements
  -Triple element to follow
  1, 1003, 1, - the bottom of the roof - i.e. the flat Wick (rectangle)
  16, 1003, 1,-the slope of the roof is (rectangle)
  31,1003, 1,-North gable (triangle)
  43,1003, 1,-the slope of the roof (rectangle) West
  58,1003, 1 - North gable (triangle)
  ),
  SDO_ORDINATE_ARRAY
  (
  4,0,2,--Bas of the Surface (rectangle) roof has
  4.2.2,
  2,2,2,
  2,0,2,
  4,0,2,
  4,0,2,--La slope of the roof (rectangle) is Surface B
  4.2.2,
  3,2,4,
  3,0,4,
  4,0,2,
  North 4,2,2,--Pignon (triangle) Surface C
  2,2,2,
  3,2,4,
  4.2.2,
  2,2,2,--La (rectangle) roof pitch Surface D West
  2,0,2,
  3,0,4,
  3,2,4,
  2,2,2,
  North 2,0,2,--Pignon (triangle) Surface E
  4,0,2,
  3,0,4,
  2,0,2
  )
  )

  I was then 54502 which means that the solid is not closed. The solid must be closed volume.
  You can set this geometry as a collection as follows:

  SDO_GEOMETRY
  (
  3004,-SDO_GTYPE 3008 for a Simple solid value
  NULL,-no mark
  NULL, no data in the attribute SDO_POINT_TYPE
  () SDO_ELEM_INFO_ARRAY
  -1, 1007, 1,-descriptor for a single solid
  1, 1006, 5,--5 composite surface elements
  -Triple element to follow
  1, 1003, 1, - the bottom of the roof - i.e. the flat Wick (rectangle)
  16, 1003, 1,-the slope of the roof is (rectangle)
  31,1003, 1,-North gable (triangle)
  43,1003, 1,-the slope of the roof (rectangle) West
  58,1003, 1 - North gable (triangle)
  ),
  SDO_ORDINATE_ARRAY
  (
  4,0,2,--Bas of the Surface (rectangle) roof has
  4.2.2,
  2,2,2,
  2,0,2,
  4,0,2,
  4,0,2,--La slope of the roof (rectangle) is Surface B
  4.2.2,
  3,2,4,
  3,0,4,
  4,0,2,
  North 4,2,2,--Pignon (triangle) Surface C
  2,2,2,
  3,2,4,
  4.2.2,
  2,2,2,--La (rectangle) roof pitch Surface D West
  2,0,2,
  3,0,4,
  3,2,4,
  2,2,2,
  North 2,0,2,--Pignon (triangle) Surface E
  4,0,2,
  3,0,4,
  2,0,2
  )
  )

  Can I get 54518 which means shared composite surface edges are not oriented correctly.
  Finally, I've also got rid of 1006 to elem_info_array to get rid of this last error and:

  SDO_GEOMETRY
  (
  3004,-SDO_GTYPE 3008 for a Simple solid value
  NULL,-no mark
  NULL, no data in the attribute SDO_POINT_TYPE
  () SDO_ELEM_INFO_ARRAY
  -1, 1007, 1,-descriptor for a single solid
  -1, 1006, 5,--5 composite surface elements
  -Triple element to follow
  1, 1003, 1, - the bottom of the roof - i.e. the flat Wick (rectangle)
  16, 1003, 1,-the slope of the roof is (rectangle)
  31,1003, 1,-North gable (triangle)
  43,1003, 1,-the slope of the roof (rectangle) West
  58,1003, 1 - North gable (triangle)
  ),
  SDO_ORDINATE_ARRAY
  (
  4,0,2,--Bas of the Surface (rectangle) roof has
  4.2.2,
  2,2,2,
  2,0,2,
  4,0,2,
  4,0,2,--La slope of the roof (rectangle) is Surface B
  4.2.2,
  3,2,4,
  3,0,4,
  4,0,2,
  North 4,2,2,--Pignon (triangle) Surface C
  2,2,2,
  3,2,4,
  4.2.2,
  2,2,2,--La (rectangle) roof pitch Surface D West
  2,0,2,
  3,0,4,
  3,2,4,
  2,2,2,
  North 2,0,2,--Pignon (triangle) Surface E
  4,0,2,
  3,0,4,
  2,0,2
  )
  )

  It validates well.

  There are a few rules of solids that we listed in the Handbook of spatial use and book of Pro Oracle Spatial 11g.
  I can also recommend you to read the next book to understand the geometry in Oracle Spatial 3D validation rules:
  "On the three-dimensional geometries valid and invalid. If you can't find it, please let us know.

  If you need to qualify this 3008 geometry, you will need to correct the direction and close the volume of solid geometry. It is also a need to define a solid simple i.e. gtype 3008 with etype from 1007 and which is not cut in two independent volumes. If you define two or more solids, you can use the collection, composite solid or multi solid rules.

  Please let us know if you have any other questions.

  Beautiful House :)

  Best regards
  Baris

• The product I bought doesn't work! I need help and I was stuck in your 'contact us loop' for the last few days and I'm frustrated. How can I contact you for help!

  The product I bought doesn't work! I need help and I was stuck in your 'contact us loop' for the last few days and I'm frustrated. How can I contact you for help!

  Probably the best place to start is the right forum for your product. This is the forum for Distiller Server, a product used by corporations long dead, and probably not what you have. If you can't find the right forum, please let us know the FULL name of what you paid for (Please check your invoice, as Adobe have a lot of similar products), and we may be able to direct you. Good luck!

• Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

  Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

  Hello

  Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

  

  Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

  Thank you

• I need help to unite 2 users on the same CC account, can someone help me?

  I need help to unite 2 users on the same CC account, can someone help me?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <==> NOTE DAYS AND TIME

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I need help about illustrator. I have the portable version of CS6, install and won't let me open the program. I get the error: 1 I have windows 7

  I need help about illustrator. I have the portable version of CS6, install and won't let me open the program. I get the error: 1 I have windows 7

  Error code 1 is often associated with permission issues. Have you tried to install Illustrator in a new user account with admin rights? If you want to download CS6, here's how to get it through creative cloud: html http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications.

  Let us know how it goes.

  Concerning

  Stéphane

• All my photos are displayed such as BW because somehow I saved a preset to quickly develop and it records in BW.  This is for all of my photos.  Individually, I can cancel their but did need help how to get rid of the pre-selection, so he's going to defau

  All my photos are displayed such as BW because somehow I saved a preset to quickly develop and it records in BW.  This is for all of my photos.  Individually, I can cancel their but need help how to get rid of the preset then all photos of goes to Default or in the shot. Thank you

  Go to the develop module and highlight all the images in the film at the bottom of the screen. Enable automatic synchronization, and then click the reset button. To reset all the images in your camera default settings.

• iMac 8.1 stuck on the apple logo

  Model: iMac8, 1

  2.66 GHz Intel Core 2 Duo

  At 2BG memory when the problem started

  Mountain Lion 10.8.5

  Is in trouble with occasional frosts. Would be closed and it should restart very well. About 2 weeks ago, the computer froze. I shut down the computer and restarted. The apple logo came with the spinning wheel, and then just the apple logo.

  I can start safe mode. Tried resetting the PRAM, reset of SCM. Tried to start with all peripherals except keyboard and mouse disconnected. Use the command R to start the computer and went into the disc utilities. Disc checked and it said disc looks OK. Verified permissions. Mistakes came for iTunes more a warning which was not repairable. Fixed permissions. None of these permits to start properly.

  Parle talked anyone computer repair who suggested to unplug the computer, hold the power button while up to one minute, plug the computer back in and pressing the Start button. It came in fine. A few days letter that the computer froze and I had to stop it. You press the Start button, got the spinning wheel, so only the apple logo and apple logo. Start the computer by pressing command + R and reinstalled Mountain Lion. Installation once it stuck at the apple logo again. Active disk. Drive seems to be OK. Permission verified. Permission with iTunes but issues no warning this time. Repaired permissions. Nada.

  Inserted the installation disk, turned on the computer while holding D key. A ran Apple Hardware tools (tests of short or long). This error message came up twice with different numbers of rpm: 4MOT/1/40000003: drive HARD-110. I know that it's the hard drive fan. Computer repair man came out. Thought problem may be because I only had 2 GB of memory and ran only to open the Lion of mountain with several programs. Upgrade to 4 GB memory, which is recognized by the computer. But the computer still does not start correctly. Tried the Single Mode and run/sbin/fsck - fy. Said it seemed OK, but changed the volume. Ran he says once again and everything seemed OK. Still will not start.

  When I start in the disc, part of the grey background Utilities is missing. If you move the cursor on the screen, the gray background fills.

  Also, when I try from normally I get startup chime, the apple logo and the spinning wheel. After that make a spin the wheel stops, there is sort of a Flash, then the wheel goes and remains the apple logo. I can hear the computer tries to do something, then the arrow cursor appears and can be moved around the screen. It's like that.

  Also installed Mountain Lion on a USB key, it made the startup disk and tried to start the computer normally. Still will not start.

  Any ideas or suggestions for what could be wrong or other things to try?

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• My iphone is stuck with the itunes logo

  my iphone is stuck with the itunes logo. How can I unlock it? »

  Your phone needs to be restored. Take a look at the instructions here.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• iPad stuck on the apple logo

  IPad is stuck on the Apple logo and halfway along the slide to download

  was reset as the wifi would not connect

  This can help:

  Press and hold the power button / stop and the Home button at the same time, the corners of the black screen,... .in taking... When you see the white apple logo appear to leave bot buttons go.

• Pavilion G6: upgrade Windows 10 has not stuck on the HP logo

  Tried to update 8 victory to win 10. Stuck on the HP logo.  I tried to unplug and and reinstalling the battery (let stand a little and pressed the power button to drain the energy). I tried failed bios, tried to turn on virtualization, all tried restore, startup repair the computer after trying to start several times, restore points are gone, I don't have a CD because HP no longer send them. I don't know what to do with this thing. Help, please.

  fixitrod

  Hello;
  
  Let me welcome you on the HP forums!
  
  While Microsoft says there is no risk in the upgrade of Win10, because they allow you to believe that you can always return to your BONES and the original installation program within 30 days, the ugly fact of the matter is that the Win10 GoBack feature turned out to be unreliable - and when she fails, she can let machines in a State corrupted - that does not always happen , but it happens often enough to be a problem and you will get no warning beforehand that he goes to the trash your PC!
  
  If this is not enough, the Win10 upgrade is known, in some cases, corrupt partition recovery stored by the OEM that built the original machine. It's pretty much guarantee that no HP recovery will work.

  What will work restores your computer to its original factory state using HP recovery media.
  
  It is a set of DVD and a CD or a USB key, which will erase the hard drive (removing all data, applications and settings, reinstall the original OS, drivers and utilities for HP. In some cases, you will be able to order a USB instead of discs.  You must order at HP; they cannot be downloaded.
  
  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entry and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  If HP no longer provides a recovery media for your model, a few other sites, you can check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck

• Start stuck at the Dell logo screen

  Hello

  I have an inspiron nine 5447, which was working fine until yesterday. If I try to start now, it's just stuck to the Dell logo and I can't go in the BIOS settings. I tried pressing F2 and F12, but the screen is still stuck at the same screen of the Dell logo. Can someone help me with this.

  Thank you

  Nikhil

  Hi Nikhil,

  External devices (except AC adapter) connected to the computer. If so, disconnected the and try to turn on the computer.

  If it's the same situation, and then turn the computer off. Key down, then and now the power of FN key on the computer.

  In the case, the computer is blocked at the Dell logo. It's a hardware problem, contact Dell Technical Support in your region to replace the parts.

  I hope this helps...

• the usb is stuck on the usb plug on the underside of the mouse, microsoft 4000 wireless mobile mouse

  Well I was being a fool and pasted my usb key to connect the mouse to the computer in a hole and he is now stuck I tried it out and after a little research I discovered that I stuck the USB to the USB jack on the bottom of the mouse, but why didn't he come?

  Hello

  Thanks for posting your query in the Microsoft Community.

  You have a problem with the Microsoft Wireless Mobile Mouse 4000, being stuck on the USB. It must be hard when something that is important to you does not work as expected. I appreciate any effort that would put you in all. I will guide you in the right direction.

  To help you with the hardware components of the mouse, I wish that you contact Microsoft Hardware Support for assistance.

  Check out the link-

  http://www.Microsoft.com/hardware/en-in/support/contact-us

  Back to us for any questions related to Products from Microsoft or the Windows operating system. We will be happy to help you.

• My iPhone 6 is stuck on the apple logo

  My iPhone 6 is stuck on the apple logo. If I put it to download it just stays like that or it stops and says it has no battery, even when plugged. I can't enter in recovery mode because my home button just stopped working out of the blue. I don't know what to do.

  Charge the battery for an hour and then try the recovery mode.

• Stuck at the apple logo &amp; no backup to restore

  Well, I have an iPhone with ios 9.3.3 6. When I turn on my phone it stuck at the apple logo and after 10 seconds it turns off and when I turn it on again, same question.

  • Not having iTunes backup
  • No effect after hard reset
  • Tried to resolved via Recovery Mode, updated and restored but the problem is always there, always stuck and goes off

  Did you put your iPhone in DFU mode before resetting?