Acer Iconia B1 - 720 update fails

Similar Questions

• Acer iconia a100 update fails "network coverage is currently poor."

  My Acer Iconia A100 has Android 4.0.3 and all updates fail with the message:

  Network coverage is currently low

  but it is not 100%, and all other network functions work fine.

  I see a LOT of problems, debate and questions with this same error on models Iconia tab, but so far no clear solution.

  Is this one? or is this just an orphan machine?

  Their support website lists nothing available for the A-100.

  Your version is the latest for PA_CUS1.

  the documentation is normally in the update zip file.

• Acer Iconia A3 - A10 is not connecting to wifi from kitkat update

  So, I got my acer iconia for about 5 months and have never had a problem with wifi connectivity until the update of kitkat. When I try to connect to the internet, it says the usual: connection, authentication, but it gets stuck on IP address get and then starts a return loop to connect. Has anyone else had a similar problem? Help, please!

  Hello..

• Update Acer Iconia

  Hello. I have an Acer Iconia 500 which is about 4 years old. I bought it when my laptop was stolen but unfortunately hardly used and only recently rediscovered it. Despite several attempts by a relative of technophiles and advice from a very helpful Lady in the Acer customer support I couldn't update the device. I tried to use the instructions provided by the customer to 'restore factory settings' but still without success. I'd like to be able to something with it, but for now it's just too much room. For any help or suggestion would be appreciated thanks.

  Billsey thanks for your comments. I don't know why, it's now different, but now I went into settings and restored to "factory setting" from there. Now all works well.

• Error in partition Acer Iconia B1 does not accept the update.

  My new Acer iconia b1 - a71 16 GB does not accept the OTA update in the system start menu! He accepts, and download the update. After that is give me to reboot and install. And after - installation under the start menu in the system stops

  ERROR:-invalid partition setting
  17: 238e8000:888e8000 of fat
  Instalation aborted.

  The Tablet is clean and the. I tested it without SD card inside. I even try with the original OS rom in the Acer support site - and still the same error! Can anyone describe it is hardware problem to return to the supplayer or how to fix this problem?
  Can you help me?

  A hotfix is available to resolve the error of invalid Partition. In addition, we have created a few video tutorials that will help guide you through the installation of the patch.

  Download the patch

  Iconia B1 - A71, install the USB 2.0 driver - video tutorial

  Iconia B1 - A71 error invalid when updating Android (FAST) partition - video tutorial

  Iconia B1 - A71 error invalid when updating Android (FULL) partition - video tutorial

• Acer Iconia A-810 fails to connect to the Google Server

  I just this tablet and everything so far is ok, but it fails to connect to the Google server. He has no problem connecting to other servers however. Both laptops and another my Tablet connect to the Google server perfectly. I use ATT broadband. So I guess that something in the Acer Iconia tablet is the origin of the problem. Any suggestion?

  Thanks in advance,

  Marina

  1. go to setting-> Applications-> shop game Google-> erase-> empty the Cache.
  2. go in setting-> Applications-> Service Google Play-> erase-> empty the Cache.
  3. Enter your Google username and password after opening Google Play Store again.

  I hope this works.

• Iconia B1-720: will not update to OTA!

  Today, I got the update notice for my Tablet and it errors after restarting and tells me that the update failed! Any suggestions?

  Please disregard my question, I solved my problem and the update has been applied. Thank you!

• Reboot Acer iconia W510 problem

  Every time when I start my Tablet (Acer Iconia W510) after the password a message saying something like a reboot is necessary due to some problems (the message and the Tablet works very well after that and I have not noticed any reboots after the password, but maybe before).

  In any case, the message said that the problems exist in the following files

  C:\Windows\Minidump\063013-12703-01.dmp
  C:\users\helja\appdata\local\temp\wer-31921-0.SysData.XML
  C:\Windows\MEMORY. DMP

  Also during the installation of some programs or updates and if the restart is required after installation of the tablet to the first encounters a problem and fails to restart at first but can solve the problem and Tablet so far started normally. (only a message that there are reboot problems but no precise information on the nature of the problem is given)

  Hi Kari,

  Thanks for the update.

  Sometimes, between the uninstalling and reinstalling software/drivers, it's a good idea to run the Windows Disk Cleanup utility. The disk cleanup utility to free disk space by deleting unnecessary files from your computer.

  Please consult the following link and remove some unwanted files:

  Delete files using disk cleanup
  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-8

  Please get back to us with the State of the question.

• Automatic update failed for KB911895

  Automatic update failed and I got a message telling me 'important update' lay HID data entry error KB911895 filter. -What it means and how to fix it? I use an Acer Aspire One laptop. The only device I have attached a wireless microsoft mouse. Can someone help me?

  Hi simplysue,

  Please contact the Microsoft answers Forum.

  Follow these steps and then try to install the update.

  1. go to the location: c:\windows\system\drivers\
  2. search for and rename the file wdf01000.sys wdf01000.old
  3. restart the computer.

  If this does not work, follow these steps:

  Step 1: Reset windows update components

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Step 2: Disable the security software and allow it, once the diagnosis made.
  

  I hope that helps!

  Thank you and best regards,
  Abdelouahab

  Microsoft Answers Support Engineer

• Windows update fails on my machine windows 7 since August.

  I just realized that the Windows 7 pc used by my children updates not more since about last August.   I disabled the auto update in an attempt to upgrade a single package manually, but the installation fails at all times, regardless of the package that I select.

  Here are some of the mistakes we receive:

  • 800706B 3
  • 800706Ba
  • 80070426
  • Sometimes the update crashes at 11% of the download and will not return.

  I tried to run the tool to fix the update that was part of the resolution of the problems, and it has not solved the problem.

  Please note that I have tried several attempt, and I rebooted my machine often and the problem persists.

  Please let me know if you have any suggestions of if you need any additional information that might help identify the problem and the investigation.

  Thank you

  Stone

  WIndows 7 64-bit.  Acer system

  28 updates are pending.  233 update megs

  Microsoft Security Essentials Version: 1.0.2498.0

  [Is this typo to v1.0.2495.0?]

  ACTIONS:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in # 1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. click right on the file saved in # 1 b above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  5. open IE8 32 bit (only!) to http://support.microsoft.com/kb/971058 [ignore the section will APPLY to] & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  6. restart & test...

  How will I know if my computer is up to date? :
  http://Windows.Microsoft.com/en-us/Windows7/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Tablet unloading / loading too fast of Acer Iconia A1-713.

  Bought an acer Iconia tab 7 (A1-713) a little over a month. Now battery is suddenly dump / reload too quickly. Has implemented to update the KitKat for a long time, so don't think this is the issue, but now the battery dies even if its display of 75% with a few minutes of reading simple docs in offline mode. Need help... Please!

  I'm afraid it sounds like a hardware failure with the battery. Contact Acer support and they will repair it for you.

• Acer Iconia tab upgrade 10 (A3 - A20)

  I received a notification to upgrade my tablet, after the upgrade, it is still on KitKat, thought that it would be upgraded to lollipop as mentioned on: http://www.pcadvisor.co.uk/reviews/tablets/3601426/acer-iconia-tab-10-review/

  It is not an official release date on the patience of lollipop update so... need.

  Moreover, sometimes little updates on the previous version are necessary before a new version (KitKat of Lollipop)

• Acer Iconia (W1-810) 8W - boot from USB...

  Hello world
  I have an Acer Iconia 8W (W1-810), and I tried to install another OS through my USB key. I already changed the boot order in the bios and secure boot disabled, but I'm not able to start. Y at - it a boot to access menu, if yes, how to reach it, if not, how can I start the USB? Thanks in advance.

  Edit: I activated the F12 boot menu and tried a USB pen create fom Universal USB install (which is what I always use to install Ubuntu on a PC) and Intel on the other with Win32 Disk Imager (with Android Ivy-bridge of the Intel Web site). Menu of startup only recognizes Windows...

  Edit 2: updated the BIOS to 1.06, installed rEFInd on Windows, nothing... Does not seem reccogize what USB deviced outside Windows...

  Discovered that there is a single machine 32-bit EFI. Managed to adapt the Ubuntu image to have a 32-bit efi loader and managed to start the USB key. Always difficult to install but at least I'm in.

• Acer A1-830 can update you of Kit Kat 4.4.2 to 5.0 Lollipop with this link

  This link says update available for the A1-830.

  Is it possible and legitimate?

  lollipopupdate.xyz/Upgrade-Update-Acer-Iconia-a1-830-to-5-0-Lollipop.html

  [edited to conform to the guidelines - potentially dangerous link removed]

  Not legitimate, because it is not a construction of Acer.

• I have an Acer Iconia 7 b1-730hd one.

  I have an Acer Iconia 7 b1-730hd one. a few days ago, I have a problem, I look I have 19% battery whether it is loaded or not. What can we do? Thank you

  I had exactly the same problem, I opened the back to see what battery was in it so I can get a new a disconnected former then reconnected after obtaining details what it, and once I put it together again everything was fine. He did come up with a message saying there is a software update available once I'm within reach of WiFi but I downloaded & installed & now every thing is fine. So try to disconnect the existing battery & reconnect if you wish. It worked for me.