Satellite U840-10: cannot configure Intel IRST after the fresh install of Win 7

Similar Questions

• Satellite L655-1DV - lost partition after the fresh install of Win 7

  Hello

  I have a Toshiba Satellite L 655 - 1DV and yesterday I installed windows 7-32 bit and all the drivers (clear).
  My problem is that after installing my partition (the one with the gbs much) was not recognized in windows.

  Management of the computer, it says I have 450 GB
  https://DL.dropboxusercontent.com/u/100247419/6655554.jpg

  but I have only 31 GB
  https://DL.dropboxusercontent.com/u/100247419/ttttt.jpg.

  How can I solve this problem?
  Thank you in advance.

  Hello

  How did you install Windows 7 on HARD drive?
  Format you the HARD disk during the installation process?

  Disk Management displays only a single partition. Which is really strange because even if the HARD disk should be formatted, you should get at least two partitions (a small partition for restore Win 7 files) and a larger system partition C

  I think you should try to change the size of partitions in disk management C.
  Right click on the partition and decrease the size of the partition. Then you could create a new partition and could mark it is active.

  It would be very interesting to know how the partition is displayed in Windows Explorer.

• Satellite A210 - 127 (PSAELE) cut off and BSOD after the fresh install of Win 7

  Hello Toshiba Support Forums.

  I installed Windows 7 Ultimate x32bit 2 weeks ago and I have problems around him.
  The only driver I have intalled was ATI video card driver and touchpad driver to make it work.

  The problem is sometimes the laptop shutsdown itself and after I turn it back on it says blue screen and some other information you need, but I closed it.

  Also im gamer and sometimes when I play the game it shutsdown again. When I use Google Chrome or Firefox, the browser hangs and makes the pc of the room with her for at least 10 min. it is really bad and I also want to set.

  Also, I want to ask about memory card reader because I insert a card in the reader, but it does not work I think I need a driver for it but is not in the drivers Toshiba Web page.

  Thank you very much!
  If you need any other information that I will deliver to you order for ifx these annoying problems!

  > The only driver I have intalled was ATI video card driver and touchpad driver to make it work.

  Where did you find this ATi driver?
  It could be possible that the installation of this driver ATi the BSOD.

  My girlfriend has the same laptop Satellite A210 with an ATI Mobility Radeon HD 2400 graphics card. The driver version is 8.632.1.2000 and the laptop is preinstalled with Win 7

  It works perfectly without any BSOD.

  By the way: the cardreder works too... you could take a Vista driver or the driver put the A300 series too

• Satellite C660 - Missing WiFi after the fresh install of Win 7

  Hey dear community,

  Ive had the following problem.

  I got Windows 8 on my laptop a few days then noticed that it's the biggest disappointment of the Millennium, and I did not have my original CD Windows 7 more so I downloaded the ISO of [here | http://www.chip.de/downloads/Windows-7-Home-Premium-64-Bit_46355794.html] and formatted with ISO.

  Then I realized that theres no card on the laptop more.

  Then all Lan and wireless Lan indicator found on the Toshiba page for my laptop has me only the connection to the local network.

  Conclusion: The LAN connection that I have now collapsed.
  A Wi - Fi connection is not displayed with the adapters in Device Manager.
  In Device Manager there is a network controller (if this is right), but the laptop can not find a driver in the driver update and it is not active.

  I hope you can help me, I'll be back without problems via WiFi to Internet.

  SRY for my bad English Im student have in grade 10: smileyvery-happy:

  Greeting
  TazzyTV

  Edit: Have a Toshiba Satellite C660 - 2nk PSC1QE

  The Satellite C660 - 2nk PSC1QE-04H002GR was equipped with Atheros AR9285 Wlan / BT combo card.
  To get (both WLan and BT devices) working this machine, you must install the driver Atheros Wlan, filter for driver Atheros BT package and Toshiba BT stack

• Satellite L755D-S5204 dead after the fresh install of Win XP

  Regarding this Toshiba lab Top I bought the last weak.
  Model: Satellite * L755D-S5204 *, I had to install a new system (Windows XP 32-bit SP3)

  But there is a major problem; who is that definitions of drivers that DVD was not included with the lab on it and my Lab Top is currently dead.

  I'd be grateful if you provide me with a download link for the drivers DvD definitions.

  Can you please be more specific?
  What you're looking for?
  Do you need drivers Win XP or what?

  The Satellite L755D-S5204 seems WE notebook series and Win XP drivers are not available for this new series.

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• Envy 17: How to change the graphics unit after the fresh install of Win 7?

  How can I switch between the internal and the discrete graphics unit?

  I installed the drivers recommended from HP website, but I don't have the ability to switch.

  I recognized with dxdiag that the system uses Intel graphics unit only, but I want to use the AMD graphics unit.

  I can't install the CCC of AMD, because she claims that no device is available. So I checked in the Device Manager if the AMD GPU is recognized, and it is not! All the drivers are installed.

  The BIOS is limited and I am not able to change the graphic in the BIOS.

  So I need your help.

  Please give me a solution for this problem.

  Thanks in advance for your support!

  SysInfo:

  Model: HP Envy 17-3080ez (Switzerland)

  REF: A2Q30EA #UUZ

  OS: Windows 7 Ultimate x 64 (clean)

  Fixed a problem. Just reinstalled the whole packs AMD and did a restart. Then install the factory rider once more, and everything works fine!

• Recovery work after the fresh install of Win 7?

  My toshiba provided with Win7 Home Premium.
  I had a win7 pro geuine copy work and if I sintall on the C partition I'll lose the boot partitions for recovery-related sector?
  Which means that I would not be able to go back to win7 HP as a factory reset?

  Is it possible to recreate the previous boot sector?

  Thank you

  Hello

  > I got a win7 pro geuine copy work and if I sintall on the C partition I'll lose the boot partitions for recovery-related sector?

  Unfortunately, Yes.

  The new Win 7 installation would be to remove the early boot manager, which means that you would not be able to choose the option of HARD drive recovery.
  I highly recommend creating a Toshiba Recovery disk before you install or change Win 7

• Cannot reinstall PSE 7 after the restoration of PC (Win XP). Impossible to uninstall, STUCK. Help, please.

  Error message when you try to start the 7 Elements after the restoration of PC (Win XP) "couldn't start b/c the application configuration is incorrect". When you try to uninstall 7, it doesn't appear in the Conrol Panel. But there is a Photoshop 7 folder in Program files. If someone could HELP Please, it would be greatly appreciated. I use this program so much!

  Thank you in advance...

  Here's the Adobe documentation to manually uninstall PSE7:

  http://kb2.Adobe.com/CPS/405/kb405847.html

  Ken

• Satellite 2450-201: cannot use TV option after the new installation of the OS

  Hello

  I have a laptop toshiba satellite 2450-201.
  I've always had the TV OUT works well with my TV, use the right cable SVIDEO.
  I was able to watch divx movies in my TV using my computer.

  I had to format the laptop and installed windows XP again.
  After that, I can't use more TV-OUT option, so that the image of the laptop could be seen on television, I've always had.
  After that I updated display drivers, but the problem remains.

  Can someone help me?
  Thank you

  Hello

  How do you reinstall the operating system? Have you used the recovery CD?
  Usually after the reinstallation of the operating system from the recovery CD, everything should work properly.
  It is important that you can switch to the TV. In this case, you can use FN + F5.
  If it's not working so I guess that for display devices hotkey utility works or was not installed. Well, the alternative is to pass on the TV via the graphic properties. The TV option, you should find somewhere in the advanced options.

  However, check it and check if you have installed all the drivers.

• Cannot upgrade to SP3 after a fresh install of XP. Gets the error while accessing the Windows Update page: "the site has encountered a problem and cannot display the page you are trying view."

  Original title: install SP3

  I did a clean install of xp with sp2, hear automatic updates.  After 3 days sp3 has not downloaded, computer at the time of the update. Cannot load an update site download also constantly message "the website has encountered a problem and cannot display the page you are trying to view.  I tried options suggest they also get the same message or fail to load.

  I did a clean install of xp with sp2, hear automatic updates.  After 3 days sp3 has not downloaded, computer at the time of the update. Cannot load an update site download also constantly message "the website has encountered a problem and cannot display the page you are trying to view.  I tried options suggest they also get the same message or fail to load.

  Just install Windows XP SP3 manually...

  Before do you - make sure you have restored all the way back to Internet Explorer 6 * and * all your drivers for hardware devices are the latest version of each of the web pages by the hardware manufacturer (Microsoft did not your hardware - to be of course checked manually for the most recent driver by visiting the Web pages or the manufacturers yourself and find the latest driver for any model device (s) you have - map) motherboard chipset video, audio, network, etc.)

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

• Good question after the fresh install of Vista Ultimate

  I just be reformatted my laptop Vista ultimate.

  But now, I found that I lost half of my volume, and when I put my external speakers to stop the song in the media player and I have to start the song so she can play through the speakers.

  If I remove the speaker from taking while playing music no sound comes out of the computer as it should do.

  Help, please.

  Hello

  Have you tried to update a sound driver or upgrade Windows by default?

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Undetected after the fresh install ESXi virtual machines

  Hello

  I have to say I really enjoyed working with ESXi, but I run a quick question for the moment.

  I initially installed ESXi 5 on an SD card and created several virtual machines via vSphere Client Windows. Because of the card SD comes off on the reboot (using a Dell R610), I have now decided to install ESXi 5 on a USB key. However, when I open the Windows of vSphere client, I do not see the virtual machines on the host, but I see that they are always present in the VMFS data store that I created earlier. When I boot from the SD card, they appear very well.

  I have to migrate somehow?

  Thank you very much for your help!

  As this is a new installation of ESXi you can save the VMs from the data store as the inventory.xml on the new facility can be empty.

  Measures to save the virtual machine using vmx are available on Ko http://kb.vmware.com/kb/1006160

• A general error occurred: could not connect with the password of administrator of vim cannot configure VIM account on the host

  Community salvation.

  Story: I was called to look at the configuration of vSphere for a customer. When I started looking, I noticed several problems in the environment of the person who has put in place initially. I've been noting but have done nothing to fix these up to the...

  A question that I've seen is that the server vSphere does not apper communicate properly on ESX 3.5 servers. The error message is similar to a post on this forum ( http://communities.vmware.com/message/1450789?tstart=0) however the same method of solution did not work.

  Currently I have two ESX hosts connected to a console vSphere. The Console displays the disconnected hosts and the error points to the problems with the VPXUSER account. I found

  I searched and found several articles with similar questions, so I chose a course of action

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1007132

  http://communities.VMware.com/message/1168241

  As a note - vSphere client connections toESX welcomes also directly works very well - don't show no problems and everything seems fine.

  So - my first actions were to disconnect and reconnect one of the hosts.  The operation failed with the error "a general error has occurred: unable to connect with the password of administrator of vim cannot configure VIM account on the host. After that, I followed the elimination of the VPXUSER process, restarted the agents and you reconnect the server for vSphere - to the same result. I then deleted the ESX host, removed the VPXUSER, restarted the agents and added that the host ESX back once again - but no change - the same exact error message. I don't see the VPXUSER ID are re-created by this process - so I guess that ESX and vSphere should know the ID and the password.

  Nothing shows up in the var for this - but one of the articles above explains that as a result of the use of the PAM modules.

  Just for fun, I also tried using the ROOT password and reallowing ROOT to connect via SSH - but I got the same failures. I also tried lifting the VPXUSER ID privleges but - same questions.

  If - goes here - any ideas? I can give other details or screen caputres

  ESX3:

  #%PAM-1.0

  1. Automatically generated by esxcfg-auth

  /lib/security/$ISA/pam_unix.so account required

  AUTH required /lib/security/$ISA/pam_env.so

  AUTH sufficient /lib/security/$ISA/pam_unix.so likeauth nullok

  AUTH required /lib/security/$ISA/pam_deny.so

  attempts at password required /lib/security/$ISA/pam_cracklib.so = 3

  shadow md5 password sufficient /lib/security/$ISA/pam_unix.so nullok use_authtok

  /lib/security/$ISA/pam_deny.so password required

  session required /lib/security/$ISA/pam_limits.so

  session required /lib/security/$ISA/pam_unix.so

  ESX4

  #%PAM-1.0

  account required pam_per_user.so /etc/pam.d/login.map

  AUTH required pam_per_user.so /etc/pam.d/login.map

  /etc/pam.d/login.map pam_per_user.so password required

  /etc/pam.d/login.map pam_per_user.so sign in required

  -KjB

• Cannot use windows update after the new installation of xp sp2

  Cannot use windows update after the new installation of xp sp2

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  How can I find my username and password for Windows xp media center? don't remember setting but cannot get back in after the restart.

  Hi Carol_971,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  I suggest that you try to start in safe mode and then try to log on to Windows using the default Administrator account and then remove the password for your account, check if it helps.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If you are unable to log on to Windows in safe mode, refer to the article below and then try the steps mentioned, check if it helps.

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305