Reboot Acer iconia W510 problem

Similar Questions

• No image with customized image of Windows 10 Acer Iconia W510

  I'm trying machines Acer Iconia W510 image with an image of Windows 10 we did. We have already photographed a few tens of individuals. A dozen, however, refuse to take the picture. They are currently on Windows 8. The image on an external hard drive that plug us into the USB port.

  The steps I take to the imaging process are as follows: "Change PC settings"->"update and recovery"-> "recovery"->"Advanced startup" and I click on the button 'Restart now', who sends me to a screen with three options, continue to windows 8.1, troubleshooting, and turn off your PC.

  I select 'Troubleshoot '->' Advanced'-> "Image system recovery"

  The Acer screen appears with "Preparation of the system image recovery" at the bottom. I sign in the administrator account when prompted to choose an account.

  A window appears and scans for images. I selected the "Select a system image" option and then select the correct image of Windows 10.

  Then, I select the only available option for "select the date and time of the system image to restore.

  After that, there is a message that says "for the restoration of this computer, needs of Windows to format the drive that the Windows recovery environment is running on." To continue with the restore, shut down this computer and it boot from a Windows installation disc or a disc repair system, then try the restore again. "At this point, I have no way to continue.

  Even if I plug the USB recovery drive we used, I get the same message. I don't know what the problem is or how to get past. Any help is appreciated!

  Hi Ryan,

  According to the description, you can not install updates and the this issue may occur if one or more of the following conditions are met: 

  1. The Windows Update database is damaged.
  2. Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
  3. Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
  4. A required system file is incorrectly registered.

  Try it out below mentioned methods and see if it works for you.

  Method 1

  First of all, I suggest you run Windows update troubleshooting tool to get the problem automatically detected and corrected. This fixit checks the configuration of the Windows Update components and repairs, fixes incorrect Windows Update the locations of data and records of necessary services. For the race, the troubleshooter refer to sub article what can I do if I have problems to install updates.

  Windows Update: FAQ

  Method 2

  I suggest you to check if you are able to access Windows Update services and also make sure that the following services are started. If it is not started, follow the listed below as follows:

  a. press the Windows key + R, type "services.msc" (without the quotes) in the Run dialog box to start, and press enter.

  b. Locate the Windows Update service.

  c. right-click on the Windows Update service and select Properties.

  d. in Startup type, select enable.

  e. click Start under Service status.

  f. click OK.

  g. Repeat steps c to f for the following services :

  CSP & Background Intelligent Transfer Service.

  If these steps do not help to solve the problem, you can proceed to the step below and check.

  Method 3

  If the problem persists I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article. If you already tried the fixit even before that I ask of you rerun the fixit.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways

  Keep us.

  Kind regards

• Acer Iconia W510 | Demotion in Windows 8

  I upgraded my Acer Iconia W510 at 10 Windows Tablet a few months ago. It was supposed to be all very well and all that, but when a month passed, funky things began to happen.

  -The Tablet would break streaming

  -Taskbar is almost always does not

  -Entry is very slow and registry keys after 5 seconds.

  -Graphics drivers are not compatible with Windows 10

  I would like to go back to windows 8, but all windows.old and all other windows 8 file was deleted...

  10 Windows will not let me downgrade, because it has been more than 10 days that I used it.

  Is it possible that I can downgrade to Windows 8, or am I supposed to stay with a piece of a $150 of junk?

  In your win8 device, you can create recovery media that will help you to re - install win8 in win10 machine, if the recovery partition is still intact.

• Acer Iconia W510 won't batteries

  I got the W510 Iconia for a month or two, and I have a problem that the computer shuts down with no warning or anything.

  Me I found the problem, because it only happens when the battery in the keyboard is very close to 0% power.

  The thing is that there are 95% of the power of the Tablet battery, so it's as if the computer will not pass through one battery (the one on the keyboard) to the other (in the Tablet).

  I don't know if it's a Win8 parameter or if there is something I can do?

  It's really annoying, because it gives me only about 3-4 hours of battery life with the connected keyboard.

  Any help will be greatly appreciated.

  "first of all use the docking station battery, and once she is discharged at 1%, it will move to the Tablet battery." Looks like yours does not commute. The question then becomes "where is the failover of 1%? If in the material, you have a defective unit. If the software, the issue would be to find.

  For me the easiest way would be to have a switch on the printed circuit relay (with perhaps a darlington in front but discrete components.) When a good dock is connected, the tension of mooring is used to change the power source to the dock. When the dock is disconnected or goes ded the coild is greater and the main battery is attached.

  The tab work main battery if you disconnect the dock?

  If she then just had a wall out - thought: If you go into control panel > power > open the current plan and select "advanced options" will open an "Advanced settings" list and you will have a number of options.

  I don't know if the battery of the dock is considered to be local but if a switching relay, I suspect it is. Note the switch designed ACER will be 1%. The setting of low battery on the laptop I have at the moment is low at 10% and 5% critical battery. It is possible to set the 'low battery action' to 'stop, sleep or into hibernation'.

  So it is possible for Windows power management be set so as to close the tab until it reaches the passage of 1%.

  Maybe worth a visit.

  PS I do not have to exhaust all the batteries completely. Personally would fix the passage will take place at 10% or more.

• Recovery Acer Iconia W700 problem

  Hello

  I W700 Iconia tablet, and I'm trying recovery it.

  With the Tablet, I have some recovery disks. I copied the DVD 1 DVD Recovery 2, System Recovery DVD 2 of 2 USB flash drive. Recovery is up to 99% and then it says I should put Recovery DVD 2 of 2.

  I don't know what to do.

  Can someone help me?

  Thank you

  I solved my problem! I bought an external dvd drive and it works with it.

• Acer Iconia W510 someone arriving kkkkk to work?

  I installed kkkkk but when I run the app, all I get is a black screen.  Someone at - it get this working?

  For the acer recovery management software, check under C:\OEM\Preload\Autorun\app\Acer Recovery Management v6

• Acer Iconia W510 portUSB Tablet

  USB - A on the keyboard works very well.

  But connection USB key to the connector micro USB Tablet (via adapter USB A/female-microB/male) is quite dead.
  Any suggestions?

  Thank you for your proposals. But I move forward without having a USB mouse.

  But the problem is now solved: the cause of the failure was a default quit new USB adapter

• Acer Iconia W510 Bios password forgotten

  I added a password for bios if I could change the boot mode, now I forgot the password. How can I get in the Boot section? The Tablet starts normally in windows!

  If removing the CMOS battery is not paractical you can search online for freeware reset.

• The wires for the Acer Iconia W510/W511 of power

  Hello.

  Is there anyone who had to take a closer look how the wires are connected to the 12V socket?

  Reason is, I would use the tablet in my garden, where the only power is my solar cell / battery of 12V of the summer.

  I know that I could rip it myself, but the Tablet is still under warranty, I think not only encouraged. Also I know that I can use a UPS, but a) my inverter is noisy and b) it's a bit silly to transform 12V-->--> 12V 220V

  concerning

  / Henning

  FYI here is a photo taken with my phone, as you can see just on the ground and Vout being on the ground, at the end of the connector,-, + as shown in the photo on the PSU should be child's play to hit something up.

  Image of Picasa PSU

• white pixel on acer iconia w510 difficulty anyway?

  I recently noticed a white pixel bright on my Tablet his only visible on white screens and are visible on the desktop. Is it possible to fix this? Can it be sent repair. I'm picky when it comes to my devices and that a small pixel does not bother me.

  almost all the screen have a pixel that is stuck somewhere, I don't think that sending to the service help

  Maybe according to the place where pixel on the screen?

• Problems with Acer Iconia W5 I received

  Hi all

  I got 4 Acer Iconia W5 (cannot find anything more of a model than the number) with various problems to watch.

  2 of them are ok, I can get them in Windows, all right.

  However, 2 of them have problems and I'm not sure how best to proceed without a USB slot

  Tablet 1 - begins to start, but then says that windows did not start and takes me repair options. I tried pretty much all of them, but nothing works.  Reset your machine simply takes you to a page showing "There was a problem with resetting your PC"

  Tablet 2 - customary on switch at all.  When connected to the power there is no indication he has all power connected at all.

  I think that 2 tablet is just dead, but if you have any ideas, I'm happy to hear.

  1 tablet should be repairable, but generally I'd stick to a bootable USB to fix, but these things have only slot for SD card and sim.

  Any help appreciated

  Thought you said that you have four--the others work? If you can you use it to create a recovery flash drive and use it to repair others.

  During this time with the open BIOS select "F12 at startup" so that you can tell it to start the USB.

• Acer Iconia, a screen problem

  I just got a notebook Acer Iconia One 7 B1-730HD.  Part of the screen went black & grey transparent bars there in the rest of the screen.  I downloaded a driver update, hoping that it would take but he did not.  Y at - it suggestions on how to take care of this?

  [subject line changed to reflect the new topic]

  I'm afraid it sounds like a hardware problem. Best is to contact Acer support or seller you received it from.

  [subject line changed to reflect the new topic]

• Acer Iconia W700 Wi - Fi problem

  Hello world

  Yesterday, I bought an Acer Iconia W700 Tablet and for some reason, the WiFi disconnets all the time. If I have the Tablet really close to the place of the wi - fi connection, it works fine but when I go into my living room, the internet disconnets or it was limited. Declinations thing I can do is open google and search for something. Internet hangs then...

  It's frustrating this situation... And I was wondering if I should return it or if there is anything I can do about it. I've seen also online users complain about the same problem...

  Thanks for the help!

  I would like to contribute to this topic.

  I tried the following steps which have solved the problem for me:

  Download the latest driver on the Acer's Support site.

  S ' Please make sure that the version of the Wirelesss Lan Driver download is: 10.0.0.217

  As this is a drop-down list dirver it will also improve the bluetooth to 8.0.0.214. Where the grand 220MB file size.

  -Go to control panel and delete the current WLAN + bluetooth drivers.

  -Once removed, you can go through and install the latest driver downloaded.

  -Restart the Tablet after installation

• Iconia W510 and Windows 8.1 RTM

  Hi, I tried to install Windows RTM 8.1 x 86 US of the official ISO image of Microsoft on my W510 Iconia (created the bootable flash drive), the installation worked, but the problem is that a lot of missing drivers or not after the initial installation.

  I tried to apply the latest pack of pilot of pilot site of Acer, which is designed for Windows 8, but after restarting that the Tablet is most likely stuck in infinity driver GPU reboot loop, all I see is black screen and start bar blinks every second.

  So the question is how to do a clean install of Windows 8.1 GTR on Iconia W510? Or should I wait until the correct driver pack for Windows 8.1 is out?

  Thank you

  I just want to jump in to clarify, Windows 8.1 is not released to the public and we don't post drivers or provide support for the operating system until it is officially released by Microsoft. Pilots and other media will be available on our support to http://www.acer.com site as soon as they are available after the launch.

• Iconia W510 is not compatible with Windows 10

  My 64 GB Iconia W510 runs all the latest drivers and updates available from Acer and Microsoft.

  I have the app get 10 Windows in the taskbar and planned to upgrade. When I check the compatibility of Windows 10 within the app, it says that my PC cannot install Windows 10. It says "Intel Graphics Media Accelerator - display will not work.

  Other users Iconia W510 know the same and what is Acer boards?

  After I started this topic I received an automated e-mail to the Board asking if she has not resolved since I got a lot of responses. No, it wasn't - but it is now.

  I applied all updates from Windows Update and now the app get Windows 10 says my W510 Iconia is compatible. Update problem solved. I am aware that there is still certainly a lot of things that need to be corrected with Windows 10, but the specific problem on this issue has been resolved.

  I thank all those who contributed and repost the link to ACE padgett for his answer to how to change the driver once the upgrade to Windows 10 is done:

  http://community.Acer.com/T5/Windows-tablets-and-convertibles/w3-amp-W510-Windows-10-amp-Intel-DPTF/...

  Since MS now "reset" the W510 for Windows 10, I guess it will be soon added to the list of supported Windows 10 units Acer.