Acer Inspire 7 all-in-One

Similar Questions

• no access to android from acer to a3-all-in-one, forgot password, need to reset, how?

  have you tried all possible key combinations

  http://www.hardreset.info/devices/Acer/Acer-Iconia-A3-A10/

• I need to replace the hard drive of my Acer Aspire all-in-one 5600U?

  I have an Acer Aspire all-in-one 5600U. The other day the power in our House went out due to a storm. After she came back and went to use my computer, the screen was black and said "Reboot and select proper... boot device." ». I tried to download the tool of creation of media to a USB port and start the system using this. I can get into the menu troubleshooting but nothing works. When I try to make a custom Windows installation, it says "no signed device drivers were found". What is a hard drive problem? In the BIOS, under Boot Options is does not list a specific hard drive. It just says: 'hard drive '. Thanks in advance for any help or suggestion.

  Thanks, that's what I needed to know. Appreciate the help, IronFly.

• Help! -Acer Aspire all-in-one touch screen after upgrade Windows 8 Pro

  Hi all!

  This is a rather confusing questions and about * me off no end!  I know that some of you may have encountered this already and could have a potential solution?

  I have an Acer Aspire all-in-one, AZ5101 (Aspire Z5101), with 4 GB of RAM, etc..

  Since the Developer Preview of Windows 8 came out, I've been running Windows 8 perfectly.  I completely uninstalled (each time itself) and run the following:

  Windows 8 Developer Preview, 64-bit

  Windows 8 Preview of consumer, 64-bit

  Windows 8 Preview, 64-bit version

  In any case, on this PC worked perfectly - y INCLUSIVE of the TOUCH SCREEN.  I never had a problem.

  So far so good.  Then, they finally released updates Windows 8 Pro official licensed by download.  I bought the upgrade and downloaded.  Just like in * ALL * other cases, upgrade, I chose "keep nothing" of the old system (I never really got all the important data on here), and do the upgrade itself.

  After the upgrade was complete, and ALL Windows 8 Pro updates have been applied by Windows update, I have a system where the screen is clear and precise, everything works, and all devices in Device Manager, show the Greens well, it works fine - NO ERRORS.  HOWEVER - NO CONTACT!  No touch no screen function at all.  The screen now has this time as a standard monitor.

  I tried the driver Idéacom - no luck.  Anyone know (please? LOL) how to get the touch screen to work again?  Thank you very much!  I really appreciate any help you can give.  Microsoft technical support had NO idea and no reply emails from Acer! Laughing out loud

  Thanks again,

  Mike

  [edited to conform to the guidelines]

  Hello Mike

  I sent the pilot. Please test and advise.

  Kind regards

  FReeZA

• Aa3-600 all-in-one android, wanting the instructions for use as extended acer / monitor for laptop

  I am wanting instructions how to use my all-in-one android AA3-600 as a monitor for my laptop or scope.

  Connect your laptop and AA3-600 computer using a HDMI cable, then press the third button from the top of your screen to the right.

  page 8 of the user manual.

  http://global-download.Acer.com/GDFiles/document/user%20Manual/user%20Manual_Acer_1.0_A_A.zip?acerid...

• The acer all-in-one A7600U-UR308 can be installed on a wall rack support/arm?

  The acer all-in-one A7600U-UR308 can be installed on a wall rack support/arm?

  I'll post something that comes to light. I was apparently not aware of this.

  There is a montage of available with/for the Aspire 5600U wall / desktop all-in-One computer 7600U.

  I can't guarantee that this part will be delivered with all systems, but it should be available to the command if it is not shipped with the system.

  

• Acer all-in-one

  I have an acer all in one, and what happens is sometimes when I turn it on there is no beep and it continues to boot windows, but my mouse and wireless keyboard do not work. If I close then he down button and restart the beeps and continuous Windows, but I still have no control of the mouse or the keyboard. If I reboot and then using the button on that it does not beep and the same thing happens. But sometimes when it starts in windows I control but it takes a lot of switching market to achieve this, can anyone help, thanks

  technical support was a waste of time, they wanted me to pay out of warranty to get it collected and repaired, so I dug a little deeper into why what is happening. Using DPC latency checker I noticed that it was sipiking most of the time so I had to know what was the cause, so I formatted the machine and reinstalled windows and one by one, I installed programs as the auditor latecy was fine when I first started. Because of this, I discovered that malwarebytes program was causing the spikes so I took back off and its been fine since, thanks for getting back to me in any case.

• How can I get an all-in-one Kodak ESp 3250 printer to scan to a laptop Acer As.pire? I tried to download the driver on the Kodak website

  I tried several weeks scan documents from a Kodak on my notebook Acer Aspire all-in-one printer. Prints the document very well, he won

  ' t scan. I'm tempted by a new printer.

  Hello

  I know not true with Kodak printer\scanners, but my Lexmark has a program to be launched and digitization of breast...

  This is mainly because the OCR... Optical character recognition function...

• E14 ACER: EXPIRY DATE OF CARTRIDGE IN HP PHOTOSMART C5280 ALL-IN-ONE

  HOW CAN I REPLACE EXPIRED INK CARTRIDGE IN THE PRINTER ALL-IN-ONE PHOTOSMART C5280 HP?

  Hey @mmaxxor,

  Welcome to the Forums of HP Support!

  I understand that you are looking for a way to override the expiration date for all-in-one printer, HP Photosmart C5280 ink cartridge. I want to offer you information about expiration dates.

  Expiration dates can be reset on cartridges. But expired cartridges should work correctly in your HP Photosmart too long that the cartridges have been installed on your printer before expiry. If you bought new cartridges that have already expired they likely won't work in your printer and there is no replacement for that cartridges are expired. If this is the case, you may want to consider bringing back them to the store or speaking with our Technical Support phone queue to explore additional options.

  If you had a cartridge installed in your HP Photosmart camera and would use very well and at random, to get the message that the cartridge has not expired, you should be able to hit OK on this message and continue using the printer as per normal.

  For more information on the guarantee one couverture coverage for ink cartridges and printheads, please click on here.

  Please let me know if the information I have provided solves your problem. Good luck!

• Flag r-110 all-in-one: how to use the microphone internal hp r-110 all-in-one

  I know where the internal microphone, but how to use it? I always had an external mic in the past. My r-110 HP all-in-one is new so still get acquainted with it. What I need to set up the microphone and if yes, how and where. Win 10 has a configuration of mic with voice training / recgonition, but it does not show internal mic as a choice so I'm stuck! I would try to make a recording of the voice, but have no idea how activate the microphone. HELP and THANKS

  @terrib

  System is (perhaps) one of:

  Results for ' Pavillion r - 110 all in one " (51)

  Select System > product Home Page >

  Product information > category: specifications

  Form example:

  20 - r110d of HP TouchSmart all-in - One PC product specifications

  Microphone and Webcam are located at the front of the computer, along the top edge (top of the screen).

  

  If your taskbar contains the small speaker icon,

  Right click on the speaker icon >

  Playback devices > recording >

  Check / confirm that the "internal microphone" is selected as the default device

  You can also find the control of 'His' in:

  Control Panel > display icon > Sound

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• c7180 Photosmart all-in-one: some emails will not be printed

  some emails will not print. I unplugged the printer - still does not print. also, these emails do not fit into the page - have to landscape.

  @missouri97

  Assuming that you have installed the full function of the printer software, it is probably not the printer to blame.

  Printer:

  All-in-one printer, HP Photosmart C7180 range

  Full software features:

  File name: AIO_CDA_FSW_Full_Win_WW_140_408 - 5.exe

  The browser you use to view the emails aren't always the settings you need (for example, Page Setup to adjust the size / width Fit).

  The browser or program may be missing parameters in order to translate something that the printer can understand the content.  Strange fonts or images in the content is a possible cause of printing email problems.

  Other...

  Chrome provides little in the way of the configurations - a singularity in the browser Chrome as it shows on my system Windows 10 Pro:

  Chrome > open web page > settings > print > additional settings >

  Most of the content of the page (to print) does not appear on the preview screen.

  Click on the graphics to UNCHECK > click again to CHECK the graphics >

  and the graphics and the text finally appear as expected...

  • Try another browser to open the email
  • If not using a Navigator > check the print settings in the e-mail program, you use
  • If all else fails, download / Snipcontent, save and print the data as an image

  • Reinstall / update your PDF reader (Adobe Reader DC / Foxit)

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• HP ENVY 7640 e All in One spring: printer - printing with locks on them paved preferences

  

  I'm looking for help with my HP ENVY 7640 e-all-in-one printer. I felt the single best face of disorder and I went to the printing preferences and I see there's pad locks on all parameters. So if I select a preference to change it, it does not change, I guess because the pad locks. I don't know how they got there or how to remove it Please HELP!

  Thanks in advance!

  @toni_j

  You could try the following:

  Create your own shortcut / model from the "locked" shortcuts, which are already available.

  See:

  Printing options

  See the Section titled: custom preferences print template

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP Officejet 4622 - All-in - One -: how to enlarge print on a HP Officejet4622-all-in-one printer

  How can I enlarge printed text on 4622_All all-in-one HP Officejet?

  @lostonprinter

  Printer font size is usually the product of the application that you use to present the work to the printer.

  See below for an explanation to adjust the sizes of fonts on the screen and in the preview before printing:

  Manage the print with preview output before printing

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• OfficeJet 6815 e All in One: 6815 Officejet print low quality on pc and high quality on devices

  Purchased a new HP Officejet 8615 e All in One and finally got it working after hours of shyte with unistalls and reinstalls. Now it works, but it prints documents with best quality of my laptop, iphone, ipad, and acer. From the pc, it prints out horribly. Downloaded a software/driver full features and always bad impressions from the pc.

  He is currently connected wireless. The printer test pages are all of good quality, all in colour. Scan doc says it all is green and works correctly.

  Obviously, there is something missing on my pc...

  Any ideas would be useful.

  THX

  Thanks for providing this information @MikeG7.

  Yes, it sounds like a driver problem. You should have a lot more options at your disposal.

  I checked online and the only available drivers are the base drivers. I suggest you update this driver to see if you have additional features that are available for the Windows XP computer.

  In the windows printers and faxes, right-click the printer and then click printer properties.

  Click the Advanced tab.

  Click new driver.

  Next.

  Select the HP Deskjet 990c printer, then continue the wizard.

  Apply the settings.

  Check the print settings and try them and print them out to see if the quality is improved.

  Keep me posted! Thank you!

• DeskJet 2050 all in one J510: installation HP deskjet 2050 all-in-one with windodws portable

  Hello

  Top of greaded for the new laptop that has windows 10 and can not get my printer to be seen.  When the printer is connected through the USB port, computer laptop just scan, load an application for wireless use won't see or interact with the printer as the device is not a wireless model, (only 5 years).  printer still works great on Windows 7 laptop, but the laptop keeps freezing as is the reasosn for the upgrade.

  Question is how to make the new laptop to use my printer?

  I still have the domain controller that came with it, but it will not work installation on the laptop W10.

  Help, please.

  Thank you

  Denise

  @ladyzq

  Welcome to the HP Community Forum - we are a community of fans of HP !

  If you did not, please install the software of full functionality for the printer.

  and / or

  • Start here: HP Print and Scan - Doctor help solve printer problems

  Printer, one of

  "Deskjet 2050 all in one J510 ' (5)

  Full software functionality (the printer program):

  Name of the file:

  DJ2050_J510_1313 - 1.exe

  (49.0 MB)

  Help, suggestions and examples:

  Install the full features software - printer

  Operating system recently migrated to Windows 10 and re - install the printer software:

   

  1. If you use a USB cable to connect the printer and the computer, disconnect the cable
  2. Create a Restore Point >
  3. Reinstall / update your PDF reader (Adobe Reader DC / Foxit)
  4. This works best if the updates of Windows (10) computer are up-to-date - check if you are unsure
  5. Update your drivers HP (or another computer of the seller) - printing software like updated drivers
  6. Open printer pilot site support Page >
  7. Download a new copy of the Full Feature software >
  8. Remove the printer from programs and features existing software / applications and features / all Apps / devices and printers >
  9. Shut down the computer > start and connect >
  10. Install the full feature software (find in your downloads folder > double-click the file) >
  11. Restart the computer and log in to complete the installation

  Article (s) of interest include:

  • Start here: HP Print and Scan - Doctor help solve printer problems
  • Preparation
  • Extras, tips and some Cool stuff > HP, Installation Help and Diagnostics information
  • Create a Restore Point
  • Remove the printing software (two parts)
  • Download and Installation
  • Integrated webserver (EWS)
  • 10 Windows updates (check)
  • Restart all
  • Analysis of the Options of program *

  ** Cool independent scan programs (thanks to greenturtle for links to HP extended Scan!)

  Reference:

  Options of the digitization program

  Sections of the document include:

  HP Extended Scan - Single, multiple scans, automatic framing!

  NAPS2 - not another scan PDF

  And others...

  When you see a post that helps, inspires, gives a cool idea.

  or you learn something new, click on the Thumbs Up on this Post.

  Fixed / responded? Click on the accept as Solution to help others find answers.