Acer-TC-120 and the improvement of the possibilities?

Similar Questions

• Acer blue 720 and the fan are on but the screen remains black

  Hello

  I appreciate any help that can be provided.  I tried to remove the batter on my daughter 720 and reinsert, but this problem persists.  I can hear the fan and the blue light turns on but the screen remains black.  I tried to rest for 30 seconds and esc, refresh and power.

  Thank you

  Well, when the scrween does not at all (even in text mode which allows a recovery) then it is most often a problem with the cable bwteeen the motherboard and screen, most often following it is a failure of the screen (which requires generally a matter of co-location as cracked screen) and from time to time, it is the motherboard. Probably time to contact Acer support to see on a repair.

• How can I stay on zoom 120 all the time? It goes back to 100 and some Web sites in new tabs

  Between Web pages he keeps going back down to 100. Is it possible to set it to 120 between the tabs and Web pages?

  The zoom settings are on a per site basis.

  NoSquint {web link}
  NoSquint allows you to adjust the text-only and the full page
  (text and images) zoom and color settings levels
  both globally (for all sites) and by site.

• yesternight I tried to improve my S5 iphone for a new virsion so at the end he asked me my icloud and the password I remember my password but not my icloud so I need your help please

  Yester night I tried to improve my S5 iphone for a new virsion so at the end he asked me my icloud and the password I remember my password but not my icloud so I need your help please.

  Seems that Apple has temporary problems with their activation servers. Many users report similar problem on older devices.

  Latest news: If you can not activate your iPhone, iPad, or iPod touch after installing iOS 9.3 - Apple Support

  r http://www.IMore.com/Apple-Working-iOS-93-Fix-Older-iPhone-iPad?utm_medium=Slide & utm_campaign = navigation & utm_source = im

  lder-IOS-devices-affected-by-bricking-bug/ http://9to5mac.com/2016/03/24/Apple-releases-New-Build-of-iOS-9-3-for-Users-of-o

  Hoppefully Apple will highlight the top soon.

• I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  Sasha,

  What browser (exact version). ?

  Harold Horne MVP on September 24, 2012

  0x8024400a

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. on start and then click Run.

  2 copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281>

  You may be unable to access the Windows Update of Windows XP Web site.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389>

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28>

  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364>

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717>

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center.

  This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely.

  The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  FIRST: Uninstall IE8 and IE7 if they are installed. Back to all the way back to IE6. You want other patches before you get those. Reboot after doing this.

  You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

      
  

  UTC/GMT is 14:12 on Sunday, October 28, 2012

• Are the touch screen and the LCD on the Acer Aspire V5 - separate 122P?

  Dear members,

  I broke the touchscreen for my Acer V5 - 122P when the laptop has fallen. I'm trying to find out how I can have it replaced. How much should I order? The LCD works but the touch screen is not. The touch screen and LCD are separated? Alternatively, they are integrated? I'm not a computer person, so please excuse my ignorance.

  Please notify.

  Kind regards

  SIPO

  [under the direction of privacy - please do not transmit personal information]

  Yes, the touch screen and LCD are integrated.
  Now, regarding the resolution of the issue you have with touch screen of your laptop, we recommend that you contact your support center closest to Acer authorized as there was physical damage to your touch screen. This will give you a better idea of the intensity of the damage that has been caused to your laptop and help explore a suitable resolution for the same.

  Learn more about the location of the nearest support center Acer authorized, you can contact Acer support via the following link:
  http://us.Acer.com/AC/en/us/content/service-contact

• What is the difference of acer identify you and Microsoft account! I'm very computer dumb.

  I have problems to know if there is a difference in an acer account and a microsoft account or there is no difference? I like to play games on facebook. my internet is slow because I can't afford to go faster, sometimes it seems that I have 2 different computers in one. I don't know if anyone understands what I mean.

  Acer sign is for the Acer site. Forums, your Acer account, etc. On behalf of MS is, it's just that. It connects you to Microsoft and has nothing to do with Acer.

• What is the largest MMC and SD card that the C710 Acer can use and which file formats can be used?

  What is the largest card MMC and SD C710 Acer can read and write to when inserted in the integrated 2-in-1 card reader?

  This file formats can be used with aforementioned SD and MMC cards?

  that is, FAT, FAT32, exFAT, etc..

  SD class 10 card, 64 GB max should be accompanied by the chromebook.

  Click on the link: https://support.google.com/chromebook/answer/183093 for supported file types.

• Windows 10 improvement - battery and the State of charge is displayed does not.

  For some reason any we have accidentally updated to W10 on the laptop this afternoon. Overall, it seems to work ok, but the only thing that we have noticed, is that the charge battery etc status icon is now displayed in the taskbar right tlower.

  When I plug the charger seems to be detected because I get the battery/charger Acer overlay displayed in the center of the screen for a short time - just like he used to. I don't think this is a feature of Windows, most likely a an Acer function?

  I went into Device Manager > batteries and emit a "Search for hardware changes" and the battery symbol then appeared in the bottom as right task bar usually. Plug and unplug the charger has been shown in the icon so it seems to work and we were 'okay '.

  Then, I thought I had better perform a restart of the laptop to make sure it was really now work and stable. After you reboot, the icon did not reappear!

  Tried the same trick in Device Manager but no luck.

  I did not have any other software upgrades on the Acer.

  I hope someone can help me get this rather vital icon to reappear constantly.

  Yes, it is applicable.

• Acer Aspire its problems after Win 7 Pro and the new installed HARD drive

  I have an acer aspire 8735 laptop g-6502 which has recently undergone a WD 500 GB drive HARD failure. I replaced that with a 7200 RPM Hitachi 1 TB drive and given that I don't have a Win 7 original used a disk Win 7 Pro with an extra friend.

  Windows 7 Pro and HARD disk installation went smooth. But now when I plug an HDMI cable to watch through my Marantz receiver, comes from the video, but I have to do manually the Marantz the default audio device for sound. When I unplug the HDMI, I must return to the parameters of sound and unenable Marantz and re - activate the Realtek audio.

  Before the drive died HARD, happen all perfectly when you plug the HDMI cable in and the fact to disconnect without any fiddling around with settings.

  I also have a few other questions:
  1. the touch volume control next to the numeric keypad does not control the volume more
  2. the keyboard key used to have a setting to display it. You can use two fingers on a tablet to drag the image to the screen bigger and smaller.

  I looked the site of Acer and also used my drive Application and drivers to reinstall everything that looked related to these issues. When first, I installed Win 7 Pro I let Windows find the appropriate drivers. It worked for some things but not others.

  Any ideas? I have a few scratches on my face and my forehead in frustration pain making me beat me here. Funny, but true, so all ideas are appreciated!

  Here's my screen design Mgr impression - there's an 'unknown' device IDK how to understand what it is.

  

  Hello...

  You have installed the application to launch mnager. Alternatively you can install from this link and check the function of touch volume control and display adjustment launch application manager

• I have improved my all-in-one for windows 8 and the touch screen does not

  Hello, I have an acer aspire one, and I just bought and installed upgrading windows 8 from the Microsoft site. He installed an "auditor of system" 1 who reported a few minor problems, but none of them were associated with wifi or touchscreen. after upgrade both the touch screen or wifi do any work! Good start of Microsoft! Why can't just work? "Anyway - I googled a little and found this is normal and I should have installed a pre-upgrade Acer 1 pack?  Is is true that I can't find it anywhere and I wonder if it exists, can someone point me in the right direction and also let me know if I can install it now that I have already installed windows8! Thank you all

  FReeZA... Thanks a lot for your help!  everything is working now and Windows 8 work well on this machine!  I also had to upgrade the driver for the wireless card get that work and found them on this page as well as the touch driver that you sent me!  Thanks again. http://www.Acer.co.UK/AC/en/GB/content/drivers

• When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8.

  Acer E5-471

  When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8. Only a black screen and mouse pointer appear. How can I solve this problem?

  Hello

  1 power off the device
  2. power on and immediately keep taping Alt + F10, unit will start to recovery, choose Exit & continue to windows. Post back if I helped

• I have 3 domains. A field is a constant date mm/dd/yy. The second field is a digital number (1-120) and can be changed. The third field calculates two fields 1 and 2 in the summation and shown in mm/dd/yy. How do I calculate that in the script?

  How do I calculate that in the script? I have 3 domains. A field is a constant date mm/dd/yy. The second field is a digital number (1-120) and can be changed. The third field calculates two fields 1 and 2 in the summation and shown in mm/dd/yy.

  You searched for ' add days?

  You must write a custom for this JavaScript calculation because you cannot add a number any date. Also the date strings are not just a number, even if we can convert a given date in a number for that date that represents the time form a date date (Epoch). Witn this value, we can achieve them all kinds of date calculations and collect a little information about the date. JavaScirpt uses midnight on January 1, 1970 UTC for starting point or the date of the time. Its value is zero, and every millisecond increases the value of 1. When a date string is converted to the date object JavaScirpt we have access to many properties of the date and can use several methods to extract information or adjust the date object.

  Field 1 is in the format "Date" with a format of "mm/dd/yy".

  Field 2 is in «Number» format with 0 decimal.

  Zone 3 is in the format 'None '. The custom calculation script applies to the formatting.

  The custom for JavaScript calculation area 3:

  var cField1 = this.getField("Field_1").valueAsString;

  var cField2 = this.getField("Field_2").valueAsString;

  Event.Value = "";

  If (cField1! = "" & cField2!) = "") {}

  Console.println (cField1 + "" + cField2);

  calculate that if we as no null data;

  var cDateFormat = "mm/dd/yy";

  convert start date date object.

  Kai var = util.scand (cDateFormat, cField1);

  get the date of the month;

  David var = oDate.getDate ();

  Add field 2 number of days;

  David = Number (nDate) + Number (cField2);

  of being updated for the new date.

  oDate.setDate (nDate);

  Set the field to update formatting;

  Event.Value = util.printd (cDateFormat, letter);

  } / / end of data not null;

• Not possible to export a list of virtual machines that are created in the past 7, 30, 120 and 180 days since an imported csv file containing the date of creation of virtual machine

  Not possible to export a list of virtual machines that are created in the past 7, 30, 120 and 180 days since an imported csv file containing the date of creation of virtual machine. My questions is the correct statement to the variable: $VmCreated7DaysAgo: $_CreatedOn "-lt" $CDate7.

  # #SCRIPT_START

  $file = "C:\Users\Admin\Documents\WindowsPowerShell\08-18-2014\VM-Repo.csv".

  $Import = import-csv $file

  $VMCreatedLast7RDayRepoFile = "C:\Users\Admin\Documents\WindowsPowerShell\08-18-2014\Last7Days.csv".

  $start7 = (get-Date). AddMonths(-1)

  $CDate7 = $start7. ToString('MM/dd/yyyy')

  $VmCreated7DaysAgo = $Import | Select-object - property name, Powerstate, vCenter, VMHost, Cluster, file, Application, CreatedBy, CreatedOn, NumCpu, MemoryGB | Where-Object {$_.} CreatedOn - lt $CDate7} | Sort-Object CreatedOn

  $TotalVmCreated7DaysAgo = $VmCreated7DaysAgo.count

  $VmCreated7DaysAgo | Export-Csv-path $VMCreatedLast7RDayRepoFile - NoTypeInformation - UseCulture

  Write-Host "$TotalVmCreated7DaysAgo VMs created in 7 days" - BackgroundColor Magenta

  Invoke-Item $VMCreatedLast7RDayRepoFile

  # #SCRIPT_END

  You can use the New-Timespan cmdlet in the Where clause, it returns the time difference between 2 DateTime objects.

  An example of this cmdley

  New-TimeSpan-start (Get-Date). AddDays(-7)-end (Get-Date). Select days - ExpandProperty

  In your case, you could do

  Where {(New Timespan-démarrer ([DateTime] $_.))} CreatedOn) - end $start7). {7 days - gt}

  But beware of negative numbers.

• Equium M50-244: what improvements are possible and the value to do?

  Hi all, I just got an EQUIUM M50-244, I got it yesterday from pc world and im well please with it!
  but I was wondering if there is any update worth it? is it possible the cpu clock? I'm looking for more memory, is there a limit to what I can adapt? is also a bigger hard drive possible? anything else that is worth please let me know

  Thank you, your friendly local snake

  Hello

  General it s not possible to upgrade the processor or the graphics card, but you can upgrade the memory and the HARD drive on this laptop.
  You can upgrade the maximum memory 2048 MB of memory (2x1024Mo) and you can use a with the 80 GB HARD drive may also 100 GB.

  Support memory modules are:
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

  Hope I could help.