Work doesn´t HP Zbook FN 14

Similar Questions

• Lightroom: Why edit in External Editor who worked doesn't work now?

  Lightroom: Why edit in External Editor who worked doesn't work now?

  In what sense do editing in the external editor not working? What happens when you try?

  Which editor are you trying to reach?

  People will not be able to help you unless you have a good idea of what is happening.

  HAL

• Why my drive to work doesn't always work?

  So, I use an external hard drive as a drive to work in Photoshop because my computer doesn't have a ton of memory. Sometimes I Plug and it works, but recently it has not worked. When my work drive does not work, as I opened Photoshop this annoying message appears as "display driver has stopped working and has restarted blah blah BLAH", and I only have additional memory, so my Photoshop is very slow and laggy and fan of my laptop is like screaming after me and it's really frustrating. BTW I'm not able to update my drivers because my laptop has a silent custom display driver nonsense, I don't know.

  I don't know if it has to do with the fact that sometimes I plug my hard drive when my laptop is closed, then open a session and open Photoshop and other times I have my laptop opens when I plug? It is not only capricious. Is there something that I am missing? I work on a PC with the last CC of Photoshop, if that helps.

  You probably need to ti make sure that your hard drive has a drive letter set in management records and where your scratch disk is the drive letter.

• Error-200284. Test panel shows an activity. VI working doesn't work.

  Hello everyone,

  I can't think of any other solution other than to reinstall all LabVIEW software at this point. I checked the cables connected to the DAQmx modules and they all seem to be fine. Not only that, when I look at the entries through 'Test panels... '. ', OR Max correct readings are shown. However, when I run a VI that is supposed to read the data and display it on a graph, the VI expires (after 10 seconds). The error indicates that he should know, but he received 0. The strange thing is the VI used to work perfectly. The other day, a gentleman came in a calibrated, several of our components, and after this point the VI has stopped working.

  Everybody knows a reason why NEITHER MAX would be able to read the data, but the VI would not be able to access the data? As I said, the parties are the same, and the VI has not changed.

  Thanks to all for the replies! It turned out to be the DAQmx harness which was defective. After Exchange of this possibility, everything worked fine again.

• SSO not working doesn't not with RemoteApps

  Hello everyone,

  I faced a very strange situation: trying to troubleshoot the SSO for remoteApps in Windows Server 2012R2. Everything is installed and configured correctly. I ran the commands:

  Import-module remotedesktop

  Game-rdsessioncollectionconfiguration - collectionname "RemoteApps" - customrdpproperty "authentication level: i: 0. »

  Game-rdsessioncollectionconfiguration - collectionname "RemoteApps" - customrdpproperty "address:s:remote.ccim.com complete alternative."

  Added <> domainname.com> policies allow delegating default credentials and forced gpupdate

  Added the name of the server individually to the policy allow delegating default credentials

  Checked and confirmed that the registry entry is updated according to the changes of policy

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\CredentialsDelegation]

  "AllowDefaultCredentials" = DWORD: 00000001

  "ConcatenateDefaults_AllowDefault" = DWORD: 00000001

  "AllowDefCredentialsWhenNTLMOnly" = DWORD: 00000001

  "ConcatenateDefaults_AllowDefNTLMOnly" = DWORD: 00000001

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\CredentialsDelegation\AllowDefaultCredentials]

  ' 1 '=' "TERMSRV /".

  ' 2 '=' "TERMSRV /".

  [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\CredentialsDelegation\AllowDefCredentialsWhenNTLMOnly]

  ' 1 '=' "TERMSRV /".

  ' 2 '=' "TERMSRV /".

  Made sure that - political 'always prompt client password during the connection' located in computer userconfiguration\administrative ordinateur\strategies\modeles Windows\Services Office Office Session to distance\securite.  is not set to "not configured". It changed to 'Disable '.

  However, still situation: I connect on the page web app remote with my credentials and to try to start Let's say Word, logon window will appear saying:

  Your credentials did not work.

  When I get my credentials that do not work and it asks me to enter it again.

  At the same time, strange record appears in the event viewer:

  New RemoteApp and desktop connection (RDS01.domain.com) is started by the user (esy8OkZAZ94BHhbY + 3 + KU95NykY =) without authentication credentials

  Could you please hint me what to do next and I missed something?

  UPD: I did a few tests. When I logging to remote.domain.com of the Organization to the outside, I get credentials on the first page of connection. Then I try to run Word, he asks the credentials again, I enter it and everything works. When I go to the terminal server server and go to remote.domain.com I enter the identification information on the first page of connection. Then I try to run word, windows with 'your credentials did not work' is displayed. Certificate is signed by a CA and shown as OK in Internet Explorer.

  UPD1: also when trying to launch published web app such event logged:

  Object:
  Security ID: NULL SID
  Account name: -.
  Account domain: -.
  Logon ID: 0x0

  Logon type: 3

  The account to which the connection failed:
  Security ID: NULL SID
  Account name: magent
  Domain account: cciminstitute

  Failure information:
  Reason for the failure: an error occurred during logon.
  Status: 0xC000006D
  Void / status: 0x0

  Process information:
  Calling process ID: 0x0
  The name of the calling process: -.

  Network information:
  Name of the workstation: CMIC-RDS01
  Source network address: -.
  Source port: -.

  Detailed authentication information:
  Process connection:
  Authentication package: NTLM
  Transited Services: -.
  Package Name (NTLM only): -.
  Key length: 0

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• All USB ports not working doesn't no causing of mouse and keyboard doesn't work either (considered the source of the problem). Need help fixing without using the mouse or the keyboard.

  None of my usb ports work, and I can't get my mouse and keyboard to respond.  The computer will start, but none of the usb ports work, and I don't have the use of a mouse or a keyboard works through all the patches.  Help!

  I have PS/2 ports, but no mouse PS/2 or a keyboard... did not have those last few decades and don't know anyone who has these features more

  $6.36 (free delivery if you have Amazon Prime, otherwise on $11 including shipping): http://www.amazon.com/V7-Standard-PS-Keyboard-KC0A2-4N6P/dp/B007R9YV0C/ref=sr_1_1?ie=UTF8&qid=1372529682&sr=8-1&keywords=ps%2F2+keyboard

  during boot, or perhaps in Safe Mode

  Assuming that your keyboard works during boot (and it should; trying to tap F8 to access Advanced Boot Options Menu), probably the simplest method would be to make a Hiren Boot CD, boot from it and use one of the many included tools.  I have not experienced with your particular situation, so I can not tell you what tools will be or will work for you, but my guess is that USBDeView might work.

  Description: http://www.hiren.info/pages/bootcd

  Download and burn (copied from ElderL):

  Download the Hiren ISO here (download important enough but worth it).

  http://www.hirensbootcd.org/download/

  I like to use ImgBurn to create a bootable ISO CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask Toolbar (ever).

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  Thanks for all the help. Seems that there is no easy 'reset' for bad hardware configurations.

  However, I dug to the bottom of my Lac 'tech' and found a USB-to-PS/2 adapter, which allowed me to use the USB mouse into the PS/2 port and reactivate my USB ports.

  All is well now.

  Thank you all for your answers!

  Kind regards!

• Bluetooth audio in car works doesn't not after update (23.4.A.1.232)

  Audio Bluetooth was working fine before the update.  After the update: the phone connects to the car stereo (I can tell because the radio watch phone info (name, battery level, antenna bars, etc.), but when I play audio there is no sound from the car speakers (or phone).)  Anyone else seen this?  Anything else I should try to reset? I tried to close all applications, restart the phone, then by examining the parameters for what whether that could have an impact on the audio routing - but see nothing.  Thank you.

  Hi @tbird20d

  Please, your home screen try the following:

  1. tap the icon of the Application screen.
  2. search for and tap on settings-> Apps.
  3. slide the tab all.
  4. search and tap on the Walkman.
  5. Press stop Force-> clear data.
  6. restart the phone.

  I m at disposal for any question.

• I can't update 6 CS, Adobe Application Manager cannot be installed and works doesn´t

  I have CS 6 installed on my Windows PC (Windows 7). He worked for a long time. Now I can't update the program. As a first step, I get the message 'echec failure of the update, please download a new Version of the Adobe Application Manager '. When I did it and tried to install the application Manager, I got a new message: "Setup could not be initialized. Please download Adobe support advisor to identify your problem. "But the support Advisor was closed by Adobe and I can't download the program. What can I do now? (sorry for my bad English please).

  Navigate to C:\Program Files (x 86) \Common Files\Adobe

  Remove Adobe Application Manager and OOBE

  Then try to install it.

• First work doesn´t CS6 after latest Apple Security Update (19.Sept.) on 10.6.8! Any tips?

  Reinstalled CS6 2 time - didn t work... ;-(

  THX, but the problem is now solved. Unbelivable but ture: my harman/kardon soundsticks stopped first pro cs6 to play any movie! crazy and unexpected...

• Instructions for the destination folder locked on Mac to work doesn't have a Photo Downloader

  A member of the community directed me to http://kb2.adobe.com/cps/920/cpsid_92046.html "Adobe Photo Downloader is not responding after clicking Choose/Mac OS" when I posted that as I was downloading photos from a memory card in PSE9 on a Macbook that the destination folder screen is locked won't let me choose a destination folder. Out file destiination screen that I had to force to leave every time. I don't shoot raw. However, I followed step 1 in the instructions to install the RAW 6.6 or update more high. using the AdobePatchinstaller. After that I used the Patchmaster, I received the message "some updates could not be installed, update is not applicable."  To step #3, I was invited to use the Advisor, I think it is called. He ran a diagnostic and said "Creative Suite product installation Inspector has identified the issues. Inspector discovered a problem but cannot determine the cause... "Then the problem was transmitted by the system for analysis. Is there anything else I can try to be able to "unlock" my destination files during the download?

  Wait, you have Lightroom and Photoshop Elements, but you choose to use the elements Organizer? Most people who have LR and PSE use LR for the lion share of the work and publisher of PSE as external editor for more detailed retouching (without taking into account the Organizer in total). I certainly wouldn't recommend using both applications to manage your files, does not synchronize two catalogs, so changes made in a fair will cause problems in the other.

  Please, correct spelling when you type the path of the file. If you add or subtract 's' of anywhere, you're going to have to deal with two different routes. You probably don't want to put one of your images in any folder with "lrdata" in the name.

  Editing the APDPreferences.xml file is a work-around. When, in the Photodownloader, if you click on the button choose, and then select a file, this information is saved to the location of this file tag. My editing this file by hand, you are pre-empting the button choose, you enter the information in a different way. In this way, once started you the Photodownloader you don't have to click on the button choose, because it will continue to freeze. These steps do not stop the gel does not happen.

  In addition, you have ignored the solution number 2 of the knowledge base document, which is much easier to use than the solution number 3.

  Ultimately, however, I would definitely use Lightroom to import all your images from your camera.

• My HTC One (M7) stopped working, doesn't not charge, no light!

  Hello dear community MS members,.

  My HTC One has been on the pricing of night with the Wi - Fi enabled, everything was fine that is the charger, USB cable, latest OS Android and no problem at all.

  But, in the morning, when I took the laptop, I found it out (it's happened before, but after pressing the power or the reset button, it turned on). If I tried the hard reset, charging for a long time, but there is still no charge light indicator, it appears to be dead. One thing I noticed lately with the handset, it beep sometimes 3/4 time to a time with beats logo appeared on the top of the screen.  

  Now, I plugged into my laptop Windows 7 with the USB cable. But still there is no charge light indicator (red), and cannot be turned on. The PC shows that it is connected to a device not defined and tried to find the driver installation program. Unfortunately, everything failed, could not find the driver to install, it showed just plugged failed, and driver software not found.

  I have so many multimedia files stored in it, and this mobile looks always new that I handled it with care.

  So, I would be very happy to hear of any members of the community who had this mobile phone and faced similar problem and how they solved this problem. So thanks a lot.

  MD. Nathalie Rahman

  Hi Nathalie,.

  According to the description of the problem, it seems that you are faced with the question with the phone HTC One (M7), so I recommend you to contact HTC support because they are the best people who can guide you in the right direction.

  You can see the following link to contact Support from HTC.

  http://www.HTC.com/us/support/

  I hope this information is useful, in addition to this, do not hesitate to answer, in the case where you are facing in the future other problems with Windows. We will be happy to help you.

  Thank you.

• Ping ip address ip doesn´t work if it has a zero 0

  Hello world. It must be said that doesn´t occur in other computers. I have Windows 7 with all updates.

  I have an application that uses mysql, and you can configure the ip address of the server in it. The ip address I need to input is 192.168.1.97, as I have a masekd, home 192.168.001.097 text box. But with the zeros, it work doesn´t (a few days ago it worked). So, I have run cmd and ping 192.168.1.97: it works perfectly. If I ping 192.168.001.97, it works perfectly. But if I ping 192.168.1.097 it doesn´t not at all, work doesn´t find the host. Why is this? 192.168.1.97 and 192.168.1.097 are the same!

  Thank you in advance.

  Hello. I didn t make changes. I posted it in this forum, let´s see what is happening. It's very strange.

• run_job use_current_session = FALSE doesn't work does not work

  I try to use run_job with the use_current_session set to FALSE. However, when doing so, the work doesn't seem to work. The logic below runs successfully when using use_current_session set to TRUE.
  
  Issues related to the:
  1 - is due to the fact that I am up the job at the end? If so, I'm not sure I understand the operation of the auto_drop when creating a job.
  2. we are new to Oracle 11.2.0.2. Are there any special installation which must be completed before performing with the whole use_current_session false?
  
  
  We use Oracle 11.2.0.2
  
  
  
  v_job_name: = DBMS_SCHEDULER.generate_job_name ('BillToTax_');
  
  DBMS_SCHEDULER. CREATE_JOB (job_name = > v_job_name,)
  job_type = > 'EXECUTABLE. "
  job_action = > ' / u01/appfiles /' | v_folder | ' / taxware.ksh',
  credential_name = > "billit." | v_user,
  activated = > FALSE,
  number_of_arguments = > 2);
  
  dbms_scheduler.set_job_argument_value (job_name = > v_job_name,)
  argument_position = > 1,
  argument_value = > a_file_name);
  
  dbms_scheduler.set_job_argument_value (job_name = > v_job_name,)
  argument_position = > 2,
  argument_value = > a_file_invoice_id);
  
  dbms_scheduler.run_job (job_name = > v_job_name use_current_session = > FALSE);
  
  dbms_scheduler.drop_job (v_job_name);

  Hello

  2 things.

  -Once finished the adjustment to the top of your work, you must call dbms_scheduler.enable to activate the work

  -Once you have activated the job, his schedule is to work immediately in the background, so it runs in the background as soon as it is enabled and you don't need to call run_job here.

  Hope this helps,
  Ravi.

• "Stop" Windows function does not work correctly

  My windows stop does not. I can only close by manually pressing the power button or by Log off-change user-windows stop - stop.

  Pls help.

  Hello

  It's not easy to say why the closure works doesn t work.
  But above all harm or damage registry entries are responsible for these issues.
  You can try to use the System Restore tool to roll back the OS to the beginning.

  In addition, you can consult the Microsoft document that described the shutdown problems in Windows XP. It s useful. Check it out.
  http://support.Microsoft.com/kb/308029/en-us/

• F20-137: some programs stopped working

  Hello
  My F20-137 is almost 2 months old. A weeks ago the pre installed Adobe Reader has stopped working (doesn't open at all and no message pop up, nothing happens after clicking on the icon). Then the same problem happened to iTunes and Windows media player. Media Center works great. Can someone help, please.
  Thank you!

  Hello

  Have you checked if the new installation of these programs allows to solve problems? The Adobe Reader problem sometimes on my laptop. The resettlement have just solved the problem. Disabling the background Adobe process was also successfully.
  In my opinion you have installed the 3rd software and it could be possible that this software has a bad influence on standard programs.
  Well, in addition, you can try to use the System Restore tool to roll back the OS to the beginning.