Achi mode on HP HDX X16T - 1200 CTO Premium

Similar Questions

• HP HDX X16T-1200 CTO Premium Notebook PC Webcam

  I bought a new laptop without a hard drive. I bought one and installed Windows 7 64-bit. Everything else works, but the webcam is not. I tried to install the drivers and got nothing. Help, please. Thanks in advance.

  Hello

  Try the following.

  Open windows control panel, open Device Manager, expand imaging devices, right click on the entry of the HP Webcam and select Properties.

  Select the driver tab and then click on the button "Update driver".  Select "Browse my computer for driver software" and choose "Let me pick from a list of drivers for devices on my computer.

  Remove the tick from the box "Show compatible hardware".  Under the manufacturer column, click "Microsoft" to high brightness, the entry and then select "USB video device".  Click next to install the driver.

  Once completed, restart the laptop.

  Kind regards

  DP - K

• size maximum acceptable hard drive for hp hdx x16t-1200 cto?

  my laptop is hp hdx x16t-1200 cto

  I want to know the maximum size of the hard drive can I install in it (1 to 750 GB or 500 GB)?

  Hello

  This means that you can use up to 1 TB (currently on the market, don't forget buy the 9.5 mm). They are how & tips:

  • http://ComputerShopper.com/laptops/HOWTO/replace-your-laptop-s-hard-drive
  • http://reviews.CNET.com/4520-11379_7-6445033-1.html
  • http://www.CNET.com.au/upgrade-your-laptops-hard-drive-339298932.htm

  Good luck.

• HP HDX X18T - 1200 CTO Premium: what are the ports on the HP HDX X18T notebook PC - 1200 CTO Premium

  What are the different ports on the HP HDX X18T-1200 CTO Premium Notebook PC ?

  USB 2.0 port and which is 3.0?

  USB 3.0 will have a blue Center tab or a "SS" logo next to it, or both.

• HP HDX X18T - 1200 CTO: where is the USB 3.0 port on the HP HDX X18T - 1200 CTO?

  The HP HDX X18T-1200 CTO Premium Notebook PC has USB 3.0 ports?

  No it's not. It precedes USB 3.0 a little. You can add ports usb 3.0 ExpressCard location and a complement to the card.

• where can I find the driver files to dvd for my x16t-1200 cto?

  I don't find the driver files for my dvd player.  can someone point me in the right direction?

  Computer laptop HP HDX - model X16T-1200 CTO

  Hello

  The driver for the CD/DVD drive is provided by the Windows operating system.  If you have problems with the drive, try the following.

  Run the fixit automated Microsoft at the link below.

  Windows 7

  Vista

  Check if the drive works now.

  If it isn't, click on the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.

  Then, click on the Start Menu, open Control Panel and click Device Manager.  Click to open the CD/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.  When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar).  Let windows reinstall the disc and see if it works now.

  Kind regards

  DP - K

• Hard drive 320 GB Seagate HDX X18T - 1200 CTO failure

  Hello everyone. I bought my HDX X18T - 1200 CTO last summer with the option of two hard drives of 320. I currently have my secondary drive failed each test disk error checking I throw at it so I know it's meant to death in the imminent future.

  Question: I have already backed up disc twice on different external sources, but now since my laptop and its equipment are still under warranty, I am trying to locate the area on the HP site where I can request a repair underwarranty. Could someone please direct me to the correct site link box?

  Secondary question: I really don't want another Seagate, but since it is under warranty I should get a new disc free of charge. However, I don't want to send my laptop in to an HP repair center, which is incredibly stupid when I can just share myself readers in 5 minutes. Has anyone asked the same thing before? HP will send a replacement and I just send them the wrong disc?

  Thanks for all the help.

  Simply, call the general number 1-800-HP-INVENT (I guess you live in the United States) and walk through the menus. Warranty service is one of the elements. On a hard drive, they will usually send you a replacement but they ask for a credit card number and they load it, then he credit when you send in the old. It is not the best system, but better than sending in the computer laptop everything. I don't think they'll allow you to specify the brand of replacement. It may or may not be a Seagate; depends on what they have on site.

• HDX 16 t-1200 CTO Premium: change of DigitalPersona to single pass

  I have a laptop PC HDX16T - 1200 CTO Premium, product number: nk135av under Windows 7 Ultimate which came loaded with digitalPersona.  I am running the latest version (4.11.3826).  With all the improvements of Windows and IE, sometimes it works good and sometimes not.  I am interested in passing some version of HP past Simple works well on it and save my passwords.  Someone has a link to the correct software and instructions on how to install it?

  Hi again Neal51,

  Thanks for the quick response!

  If you weren't able to find new updates for Digital Persona on your laptop using the HP Support Assistant's, then there is none available to install.

  I hope this helps!

  Best regards

• HP HDX X18T - 1200 CTO: RAM upgrade. How to determine the manufacturer RAM on HP HDX X18T news

  A 8 GB of RAM.  I think the upgrade to 16 GB of RAM.  (1) what is a compatible RAM and (2) how to determine exact manufacturer details RAM installed?  I would like to correspond with just over 8 GB of RAM the same, but what I can determine information system is that it has 8 GB of RAM.

  Here's what the service manual says about it:

  2 customer accessible/upgradable module slots supports supports up to 8 GB of system RAM PC2-6400, 800 MHz, DDR2 dual channel memory

  If you have 2 slots. Max memory is 8 GB of DDR2 - 800 SO - DIMM. The major modules of DDR2 were 4 gigs and a pair of them now at the retail price is about $200 if you have a few precious memory in your laptop and you have the more memory, this laptop can use. When this laptop is out, 8 GB of RAM was a fantastic thing.

  Post back with more questions.

  Repair manuals

  If it's 'the Answer' please click on 'Accept as SOlution' to help others find it.

• Replacement keyboard HDX 16 t? (model X16t-1200)

  I have a laptop of the Premium of HDX 16 t, model X16t-1200 series.  I want to replace the keyboard with a backlit.  I have a copy of the manual for support, and the instructions to remove and re - install the keyboard are very simple: remove the two screws from the underside of the laptop and a third screw from the upper left corner of the keyboard itself.  The problem is, I can't find this screw 3.  Ther diagram shows that it is between the ESC and f1 key, but I do not see a screw.  I have a small spacer between these two keys, but no sign of a screw.  Anyone can shed some light?

  Thank you, Don

  To join the 2 live now the keyboard, you will need to remove the switch & keyboard cover 1... See Pg 55-56...

• How do I set up my BIOS to ACHI mode?

  Hello

  where can I find the ACHI mode option in the WOODS?

  my knees: dv5-1135ee

  Hello:

  Sorry to hear that you have problems.

  When I look at your picture right where I wrote it would be (under IDE ATA/ATAPI controllers), I see the:

  Intel(r) ICH9M-E/M SATA AHCI controller you will highlight in blue.

  I don't know why you have a problem. I hope that someone else will have to intervene and help. I am very sure that you have DCIS enabled by default in the BIOS.

  Paul

• Pilot network Pavilion dv6t 1200 CTO Windows XP Realtek PCI-E

  Ahoy,.

  I am trying to download the driver for NETWORK card for my Pavilion dv6t 1200 CTO running Windows XP. I normally do by going here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3945150&LC=en&cc=us&DLC=en&lang=en&cc=us&submit=go%20%BB

  .. .clicking on the "Microsoft Windows XP" operating system and then to find the driver on the next page.

  However, it seems that clicking on "XP" takes me to the QuickLaunch driver download only. Am I the only one? I tried with different browsers.

  .. .quite frustrating.

  He got off the Realtek site.

• Pavilion dv6t 1200 CTO for Ghost boot disk

  Ahoy, all

  I am trying to create a boot disk for purposes of Ghosting. I have the BartPE disk that works with the HP Elitebook 6930p. However, this does not work with Pavilion dv6t 1200 CTO. I think it's because I can't change IDE to AHCI in the BIOS (do not see the option).

  And so I think that the problem lies with the drivers of storage but not sure. When I go to Pavilion dv6t 1200 CTO drivers HP website drivers 'Storage' alone I see relate to the USB and a Ricoh card reader.

  Any help would be greatly appreciated.

  Thank you very much.

  figured it out. necessary to get the Intel Matrix drivers out of the Intel site. I also had to get the drivers Realtek NIC Realtek off-site. those in integrated BartPE. works now.

• What DVD/CD burning s/w to install on dv8t-1200 CTO Entertainment Notebook PC please?

  IV ' e had dv8t-1200 CTO Entertainment Notebook PC but no cd/dvd burning software.

  which comes by default with hp or what worksbest on this model... I had read only dvd bluray player

  I have a factory refurb laptop I couldn't find any nero/roxio

  Thank you expert

  /

  You can start HP Recovery Manager Windows, loading chooseDrivers and reinstal Applications

  See if Cyberlink or other burning software is in the list, if it's choosing to reinstall

  Recovery Manager can be found on the list of programs all the

• keyboard & mouse freeze after the mode 'sleep', using Windows Vista 64 home premium

  keyboard & mouse freeze after the mode "sleep", using Windows Vista 64 home premium.  I received once posted this question, an answer of "fix" to a thread that has worked.  Unfortunately, I deleted the thread. I swapped the USB connectors for mouse and keyboard, but that didn't change anything.  Could someone please re - send the wire?  I promise you that I'm deleting it this time.

  Thank you very much

  E-mail address is removed from the privacy *.

  Hi RICH0214,

  Follow these methods.

  Method 1: Follow the steps in the article.

  Device Manager does not display devices that are not connected to the Windows XP-based computer

  http://support.Microsoft.com/kb/315539 (applies to Windows Vista)

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Create a new user account.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile