Acrobat (CS5) does not start, the error code 213:19

Similar Questions

• After a custom Windows 7 installed on a Toshiba Satellite P105-S6084, my audio device does not start. Error code: this device cannot start. (Code 10)

  I got driver Conexant speakers on my laptop. I tried to find a device driver updates, but have had no luck. After being in Control Panel, hardware and audio, Device Manager, sound, video and game controllers, under that is high definition Audio Device with a yellow triangle and!.

  After a right click and update driver, it says that the driver is up-to-date. In addition, the error code says this device cannot start (Code 10)

  In addition, this seems to be a driver of Microsoft when the original driver was Toshiba/Conexant. I looked on the support Web site of Toshiba for a driver updated for my laptop and Windows 7.

  Any suggestions?

  Umesh P,.

  Thank you for answering my question. I don't know that this forum allows you to stay busy. Thank you for taking the time to answer my question.

  To sum up, I checked the Windows Audio and Windows Audio EndPoint Builder according to your instructions. Both were running as usual and start automatically, so it wasn't the issue.

  I then visited Fix It. On the web page, since I am under Windows 7, the instructions on the provided web page to access the control panel and through system and security, to try to resolve the problem to fix common computer problems.

  This process led me through the same re-setup of the device through Windows 7 driver that failed previously. Also because it has detected Windows 7, the web page would allow me to run the Fix It program.

  When I visited the Support from Toshiba web page you provided, I was unable to find a sound driver for Windows 7. After filtering through my computer on their web page, the nearest driver was for Vista.

  Take a chance, I downloaded it anyway. What has been the worst that could happen? It does not work? Well, I was there already. In any case, the installation worked and I now the audio again.

  Moreover, this is the link for the driver, for anything that might be in a similar situation I've been:

  driver_audio_conexant_25636A.exe

  -or-

  http://cdgenp01.CSD.Toshiba.com/content/support/downloads/driver_audio_conexant_25636A.exe

  Also, Conexant offers no direct audio driver support and ask you to check with the manufacturer, which in my case is Toshiba. Toshiba not currently has an audio driver Windows 7 for my particular Satellite phone. Since this is an older, they can't come out with an updated driver.

  But, since the audio driver Vista download works, it is now a non-issue.

  Thank you!

  Jay

• WdiServiceHost does not get the error code 5 access denied

  Diagnostic Service Host System (WdiServceHost) has been unable to restart when you try to restart maintain error code 5 access denied. How to restart the Service

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Some services do not start in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/943996

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista

• Dell Wireless 370 Bluetooth wireless internal mini map does not, download the error code 43.

  Original title; - minimap wireless Bluetooth does not

  All of a sudden my internal Dell Wireless 370 bluetooth minimap has stop working and displays an error: Windows has stopped this device because it has reported problems. (Code 43). Could someone help me please

  Hello

  1. did you of recent changes to the system before the show?

  Method 1:

  Follow the link below and run the fix - it tool and check if it helps.

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Follow the link below and download the drivers for the Bluetooth device and install and check if that helps.

  http://www.Dell.com/support/drivers/us/en/19/DriverDetails/DriverFileFormats?c=us&l=en&s=DHS&CS=19&DriverID=R226750

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Let us know if it helps.

• Recovery Manager cannot restore Presario CQ56 & system does not start, the error BOOTMGR is missing

  1. number and product name

  Compaq Presario CQ56

   

  2 operating system installed (if applicable)

  Windows 7

   

  3. error message (if any)

  in the error log:

  Your hard disk (result-failure) id # UAMBXQ - 5H06AK - XD003F - 618U03 - DISK 1

  Start (result-failure) id # UAMBXQ - 5H60AK - XD003F - 40G 403 MEMORY MODULE 2

   

  4. all changes made to your system until the problem occurred

   

  There is no change made to the computer, before the restoration of what the computer should start, however, it would freeze once the system was running. Restarting the computer didn't help, and when I tried to restore to an earlier point, he stated that it was impossible to complete the restore. I tried the factory reset, however, it gave me an error message: "Recovery Manager is unable to restore your computer by using the original image. Please contact HP support. Error code: 0xe0ef0003. When I tried to restart the computer later, it gave an error message: "BOOTMGR is missing, press Ctrl + Alt + Delete to restart» How can I fix it?

  305 error refers to a failing hard drive. You will need to replace the hard drive.

  You can check the status of your warranty here.

  If you do not want to repair the laptop you need to contact HP support. If you are in the United States / Canada you can give them a call at 1-800-474-6836. For other countries you will need to visit this site.

  If you do not want to repair the laptop you I can provide useful information, but I'm going to need your product number. This document contains instructions to find the product number.

  I'll keep an eye out for your answer.

• Computer does not start, the Error Recovery window is continuous

  Yesterday, I upgraded to a software called Turbo Lister for eBay.  The computer must restart for the changes to take effect.  It's the start of my problem.  After the reboot, I got Windows Error Recovery screen.  He recommends launch Startup Recovery or start Windows normally.  I tried both and keeps it just goes back to the screen even as a loop.  I tried to boot in safe mode does not work.  I have inserted the reinstallation cd and run Startup Repair and that has not worked.  Help, please!  Is that what I can do about it or he needs to see a professional?

  Hello

  You can try these since the Windows CD/DVD

  1. the system back restore to before that has happened

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  2 SFC and CheckDisk from the Windows disk command prompt

  SFC/scannow

  RE-RUN the disk

  Chkdsk /f /r

  RE-RUN the disk

  then try Startup Repair.

  (there is space after C and before / k and this before / f and before /)

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• LR4 does not start 0xc000007b error code

  That's what I get when I try to open LR4. I have scanned for viruses. I went back I could go with restoration. I've deleted and reinstalled LR 2 times. My file backup get the same error code. Please help THANKS

  Based on the user comments and suggestions, we have updated our documentation on this subject with a few new solutions.

  http://helpx.Adobe.com/Lightroom/KB/error-Unable-start-correctly-0xc00007b.html

  We are locking this thread. If you have any other questions or still see the error, please continue the discussion on this thread: http://forums.adobe.com/message/4836005

• Firefox does not start, the error xul.dll thowing

  Hello!
  Stupid Flash plugin crashed my browser, and now efforts to launch the Firefox browser leads to the following error:
  Head: 'firefox.exe - Entry Point not found ".
  Text: "the procedure entry point not found hb_ot_layout_table_get_script_tags in the C:\Program Files (x 86) dynamic link library \Mozilla Firefox\xul.dll."

  And when I click on the 'OK' button, the following error: "unable to load XPCOM. And now it is all browser activity. In the installation folder (C:\Program Files (x 86) \Mozilla Firefox\) xul.dll and other files, including updater.exe, had changed their attribute "update" at the time of the accident of the latter. Dr.Web cureIt utility found no virus there. So, I think, I have to reinstall the browser.
  Is it possible to fix Mozilla with the record of my history and bookmarks? I backed up my profile folder (method of copy - paste), so how can I reinstall the browser and then restore my profile?

  Firefox starts when your computer is in the network connections of the spirit of the mode safe mode enabled?
  
  If this is not the case, try the following steps.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  The report please come back shortly.

• keyboard does not (driver is loading don't not with the error code 38) after upgrading to VMWare Player 6.0.6 or 7.1.0

  Hi all

  Host: DELL M3800, Windows 8.1

  Since the update to VMware Player 6.0.6 (or 7.1.0) Windows is not loaded (error code 38) keyboard drivers.

  The device HID\VID_046D & PID_C313 & MI_00\7 & 362ebef & 0 & 0000 had a starting problem. (Pilot: keyboard.inf, problem: 0 x 26).

  I had no problem with previous versions (VMware Player 6 to 6.0.4).

  If I uninstall VMWare Player, Windows correctly loading the keyboard drivers.

  Now, if I reinstall the earlier version of VMware Player, Windows does not load properly (error code 38) keyboard drivers.

  Can you help me?

  Thank you

  Guillaume

  The problem is caused by the VMkbd.sys driver.

  You can find the "best" solution for Usb keyboard problem

• Firefox does not start, no error message, only works in the background

  I click on Firefox it does not start
  no error message it does not start
  It works in the background in 32-bit
  I have re installed it but nothing changes

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• Windows 7 print spooler does not start: System error 1068 occurred. The dependency service or group could not start

  Hello

  I still have the "system error 1068. The dependency service or group was able to start.

  "I use Windows 7 Home premium 64-bit and my printer is HP PSC 1310 series.

  I downloaded the latest driver in the HP website, but it will not continue installation that the print spooler is not started.

  I tried "restart the spooler to print the title of the services, it does not, with the error message above.

  I have check the dependencies and it say HTTP and RPC

  I check on RPC and DCOM Server process Launcher two dependencies and the RPC end point Mapper is started

  I went to regedit and found the keys as follows I don't know if its correct:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler]

  'DisplayName"="@%systemroot%\\system32\\spoolsv.exe,-1 '.

  "Group"="SpoolerGroup."

  "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.

  74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.

  00,70,00, 6f 00 6f, 6 c, 73, 00, 00, 00, 76, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 00, 00

  'Description"="@%systemroot%\\system32\\spoolsv.exe,-2 '.

  "LocalSystem ObjectName"=""

  "ErrorControl" = DWORD: 00000001

  "Start" =: 00000002

  'Type' = dword:00000110

  "DependOnService" is hex (7): 52, 00, 50, 00, 43, 00, 53, 00, 53, 00, 00, 00, 68, 00, 74, 00, 74, 00,------.

  70,00,00,00,00,00

  "ServiceSidType" = DWORD: 00000001

  "RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.

  72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,------.

  72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 68,.

  00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 74, 00, 69, 00, 66, 00, 79, 00, 50, 00, 72, 00,------.

  69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 41, 00, 73, 00, 73,------.

  00,69,00,67,00, 6F, 00, 50, 00, 72, 00, 69, 00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00,------.

  6 b, 65, 00, 00, 6F, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00,------.

  00,53,00,65,00, 4 c, 00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00,------.

  50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 00, 00

  "FailureActions" = hex: 80, 51, 01, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.

  00,01,00,00,00,60, EE, 00, 00, 01, 00, 00, 00, 60, ea, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00

  
  

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler\Performance]

  "Close" ="PerfClose."

  "Collect"="PerfCollect."

  "Collect Timeout" = dword:000007 d 0

  "Library"="winspool.drv".

  "Object list"="1450".

  "Open" = "PerfOpen."

  "Open Timeout" = dword:00000fa0

  
  

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler\Security]

  "Security" = hex: 01, 00, 14, 80, 78, 00, 00, 00, 84, 00, 00, 00, 14, 00, 00, 00, 30, 00, 00, 00, 02,------.

  00, 1 c, 00, 01, 00, 00, 00, 02, 80, 14, 00, ff, 01, 0f, 00, 01, 01, 00, 00, 00, 00, 00, 01, 00, 00,------.

  00,00,02,00,48,00,03,00,00,00,00,00,14,00, 8 d, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00,------.

  05, 0, 00, 00, 00, 00, 00, 18, 00, ff, 01, 0f, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00,------.

  20,02,00,00,00,00,14,00, fd, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00, 05, 12, 00, 00, 00, 01,

  01,00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00

  I go to C:\Windows\System32\spool\PRINTERS, there is nothing for me to remove it.

  Any other advice would be greatly appreciated...

  Hello yan_dao69,

  I suggest that you try the methods below to solve the problem.

  Method 1:

  I suggest that you run the printer troubleshooter. This will automatically diagnose and fix printing problems:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Ideally, this would set the print spooler service issues.

  Method 2:

  I suggest that you disable the Antivirus software temporarily and verify if you are able to start the print spooler service. You can check the link that will give you information disable antivirus below:

  http://Windows.Microsoft.com/en-in/Windows7/disable-antivirus-software

  Note: Please make sure that you enable the antivirus software after the test to keep your computer protected.

  Method 3:

  Check the dependency of the spooler services in the registry.

  a. Click Start, type regedit in the search box and press ENTER.

  b. look for, and then click the following registry key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler

  c. right-click on spooler, click Export, save a backup file on your desktop.

  NOTE: If an unforeseen problem be encountered after changing the registry, please double-click on the file to restore the backup.

  d. in the details pane, if the DependOnService value shows values of RPCSS and other key, right-click DependOnService and then click on edit.

  e. in the value data box, delete the other keys and then click OK.

  f. exit the registry editor.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756 ) how to back up and restore the registry in Windows.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• My CS will not start with error code 16

  How can I find the serial number CS5.5 under MAC OS X if I want to reinstall it? My CS will not start with error code 16, he says: configuration error.

  Please visit the Doc KB: http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html

• my main wireless hp programe not working do not receive the error code 0 x 80070002

  my main wireless hp program does not keep receiving error code 0 x can 80070002 someone piz

  Your message is in the forum for people needing help with the anti-malware program from Microsoft Security Essentials (MSE).

  You ask for help in Forum Windows: http://answers.microsoft.com/en-us or contact HP Support at http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en

• Windows does not update with error code 8024402C

  Windows does not update with error code 8024402C

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  0x8024402C error code when you try to install updates on Web Windows Update or Microsoft Update sites:
  http://support.Microsoft.com/kb/900936

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft