Windows 7 print spooler does not start: System error 1068 occurred. The dependency service or group could not start

Similar Questions

• No Internet access. error 1747. and the dependency service or group could not start

  Have a laptop dell inspiron 1545 with vista (build 6002: service pack 2).  Have a wireless network at home.  laptop stopped connecting to the network 2 weeks ago.  When I try, I get a message "dependency service or group was able to start.  When I go to manage networks, there is no detected networks.  Cable internet access also does not work with this laptop. cards (minimap dell 1397 Wireless) wireless and ethernet say thet controller work correctly.  2 other laptops in the House are normally working on the network.  Reviewing service autoconfiguration WLAN and Wired AutoConfig and when I try to start the two ths get message... "Error 1747 the Authentication Service is unknown".  Another little thing, I noted... isatap.home don't works do not-message says to download the drivers- but not on net so cant)... don't know if this is related.

  can you help me?  Thank you, Aodhanm.

  I just wanted to post that I used the

  netsh winsock reset

  command to fix this same error 1747 known when you try to manually start the WLAN
  on a Windows 7 Pro computer.

  After a restart it worked fine.

  Chuck
  NerdForce.com tech

• What is the code for error "the dependency service or group could not start": 1068

  What is "the dependency service or group could start"?

  This seems to be a HUGE problem for PC users so much; It gives rise to the error 1068 code and effects so many aspects of our machines...

  What is this area of computing? What it means? If we understood this, solutions might be easier to find?
  From what I can deduce (I could be wrong) there seems to be a communication error; But why did affect many different areas of the machine?
  I recently corrected an error 1068 on an internet connection and then again on spooler print issue; Now, I'm trying to solve the error even on a sound broadcast. Frustrated? Isn't the half of it! WHAT IS THIS ERROR?

  the dependency service or group could not start
  http://social.technet.Microsoft.com/forums/en/itprovistanetworking/thread/563b908c-AA24-4000-9b2d-b6ff02f10c56

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• "The dependency service or group could not start" - cannot open network connections to connect to the internet.

  Hello

  Ive recently managed to repair my Vista computer from a black desktop screen, by doing a Virus scan from kaspersky in safemode, thanks for the advice in this thread

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/a960276d-5147-4286-A437-711e96e25296/

  However, whenever I try to go to the network connections to connect to the internet, I get the error message saying "the dependency service or group could not start", so I can't update kaspersky for the last secuirity as well as not to use the internet. I tried the system restore, but there is no previous saved location for me to do. :(

  Any help would be greatly appeciated :)

  Thanks in advance

  Sam

  Medion M96350,

  Intel Core 2 Duo,

  T520 @1.5 - Ghz,

  Vista Home Premium

  Hello

  You can use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Windows failed to start the service on Local computer print spooler. Error 1068: the dependency service or group could start. »

  I fiddle with my startup programs and now I have this error message: "Windows could not start service on Local computer print spooler.  Error 1068: the dependency service or group could start. "There is no printer listed everywhere and nothing works.

  Hi Jkoryzna,

  Thank you for choosing the Microsoft Answers forum.

  To solve the problem, fix the dependency for the spooler service information.

  Click Start, run and type the following text:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

  Alternatively, to achieve this by using the Registry Editor:

  Click Start, run and type Regedit.exe

  Navigate to the following branch

  HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler

  In the right pane, double-click the DependOnService value

  Delete existing data and then type RPCSS

  Close Regedit.exe.

  
  REGISTRY WARNING

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Navigate through the steps mentioned in the article below.
  Solve printing problems by resetting the print spooler.

  http://support.Microsoft.com/kb/2000007

  Let us know if this helps

  Concerning
  Anthony.

• Windows could not start the print on local computer service. Error 1068: The dependency service or group could start.

  I can't add a printer.  I constantly receive the associated printer spooler error messages and specifically "Windows failed to start printing on local computer service. Error 1068: the dependency service or group could start. "I tried to restart, tried"FixIt"MicroSoft application... all to nothing does not.  Help?

  Thank you!

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your printer issue in Vista Hardware and drivers Forum above.

  See you soon

  Mick Murphy - Microsoft partner

• Printer Spooler error 1068: the dependency service or group could not start

  Original title: the printer spooler error

  With the help of Windows 8

  Cannot connect printer to computer.

  Looked at troubleshooting and tried to manually start the printer spooler. but does not work.
  
  Windows could not start the Service on the local computer printer spooler.
  Error 1068: The dependency service or group could not start
  
  Could someone please suggest ways to address them. Its a HP computer. Unable to connect a printer HP or Epson via USB or Wi - fi.

  Thank you

  With the help of Windows 8

  Cannot connect printer to computer.

  Looked at troubleshooting and tried to manually start the printer spooler. but does not work.
  
  Windows could not start the Service on the local computer printer spooler.
  Error 1068: The dependency service or group could not start

  Could someone please suggest ways to address them. Its a HP computer. Unable to connect a printer HP or Epson via USB or Wi - fi.

  Thank you

  need to update Printer Spooler service...

  Run the following as run as administrator...

  https://www.dropbox.com/s/uf1borer6hgce0z/printerspoolser.bat

  Reset...

• Windows spooler printer 8 error 1068: the dependency service or group could start.

  Just upgraded to Win 8 ENT x 64 Win 7 ENT x 64.

  I thought, maybe I need to restart the service. Go in Services, look to the top of print spooler and select restart.
  But I get an error:

  "Windows failed to start the Service on local computer print spooler.
  Error 1068: The dependency service or group could start.

  "Okay, so I go into properties and see what are the dependencies.
  Attached image:
  

  RPC is running, however, no FAX.
  Go to Fax and just getting started. I get the error 1068
  Focus on dependencies here.
  Attached image:
  

  IM lost at the moment.
  Any help would be greatly appreciated.

  I ran sfc/scannow and found no problem.

  Please notify.

  I found this somewhere else and this fixed my problem

  I had the same problem and I have created a batch file that I have run as Administrator:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

• Print Spooler error 1068: the dependency service or group could start. __

  I tried - unsuccessfully - restart the print spooler on a box of XP with SP3.  I read the previous posts for this error and this box refuses to restart the service.

  Is there an easy way to fix this without reverting to a system reset?  Can I run a repair?  If so, it will fix the problem?  I tried to run a restore of the system to a previous date and who could not do anything for me either.

  When you attempt to start the Print Spooler Service, error 1068 means "the dependency service does not exist. the dependency service or group was able to start. »

  Depending on your environment and your type of printer installed, your Print Spooler Service will have other dependent services that must run before the Print Spooler Service starts.  If the dependent services do not work, you will see an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  Some Lexmark printers add their own XP services and start the Print Spooler Service, lists them as dependencies and that is why these Lexmark Services must run before the print service spooler will begin.  It may be listed as the LexBce Server.

  You now or have you ever have all installed Lexmark printers?  If Yes, do you still use Lexmark printers?

  Depending on your printing environment, if you use another type of printer, you can have other Service listed tab in the Print Spooler Service dependencies.

  Use the Applet of Services XP to check the dependencies of print spooler and options.

  Click Start, run and enter in the box:

  services.msc

  Click OK to open the Services Applet.

  Locate the Print Spooler Service, right-click, choose Properties, and then look at the Dependencies tab.  Services listed there must run before the Print Spooler Service starts.  If they don't, you'll get an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  You should always see the service remote procedure call (RPC) and maybe a few others depending on the type of printer that you have installed (Lexmark printers can add some dependency Services to your configuration of XP).  All dependent services must run before the Print Spooler Service starts.

  Dependent Services may vary according to the type of printer that you have installed.

  The RPC service is also required for many other things to work properly and is usually still running and the autostart value.

  If the RPC Service does not work and does not start automatically, you can have other problems, but start with the easy stuff first.

  Of the Services Applet, find the service remote procedure call (RPC) and if it does not, right-click and start it and set it to automatic.

  Then find and all the other print spooler dependency services listed in the Print Spooler Service Dependencies tab.  They will be lance automatically the next time you reboot your system (if that is your desire), set the startup type for these Services to automatic.

  When everything works as you want, restart and check your Services again to be sure that they start correctly and solve any addition
  questions.

  If the remote procedure call (RPC) service is not listed as a dependency for your Print Spooler Service, you must inform XP that the print spooler service depends on the RPC service.

  Click Start, run, and in the box type (including important space after the "equal" sign):

  dependent on the spooler of sc config = RPCSS

  Click OK to assign the RPC service for the print spooler service, and then make sure that the RPC Service is running and start your Print Spooler Service.

  If you still can not understand it, react with the items that you see the tab of the Print Spooler Service dependencies.

  Don't forget to restart and check that everything works correctly after each adjustment.

  Please note that using the above command will effectively remove all the current (and perhaps old) Print Spooler dependency assigned for the Print Spooler Service and assign it only dependent on the RPC Service.  It would be 'normal '.

  The dependence of CPP Service would be typical of most facilities, or after you have uninstalled all the time some printers (Lexmark), but your printer may have a few other dependencies.  If it still does not respond, we'll fix it!

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Windows could not start the service on the Local Computer Security Center. Error 1068: The dependency service or group could not start

  I use Windows 7 Home Premium

  My windows Security Center cannot be started. I spent to the Microsoft Management Console and tried to launch security through Services Center, but when I do I get the following message is displayed:

  "Windows failed to start the service on the Local Computer Security Center.

  "Error 1068: the dependency service or group could not start"
  Help, please.
  Thank you.

  Hi Rohit Chettri ,

  (I am not good in English)

  I am trying no operation troubleshooting you mentioned. I have it set for myself.

  I clicked on something related to the denfence in the heart of the action and when I restarted my computer is off almost all services. I couldn't even connect to the internet

  I went to the Configuration System (msconfig)-> services-> active tab all services and restart. After that my computer works normally.

  In any case thanks a lot Rohit Chettri.

• Firewall Windows gives me "error 1068: the dependency service or group could start" I am on Vista 64 bit.

  I use Vista 64 bit and my windows firewall does not illuminate. I tried to make a running manual but I get

  Error 1068: the dependency service or group could not start
  Things I've done:
  • ("Sfc/scannow") System File Checker - he says he found a problem in the Windows Firewall, but couldn't fix it.
  • MicrosoftFixit.WindowsFirewall.Run.exe Microsoft.com... problem persists
  I've done two things on the command line for (you) help to solve this problem:
  Queryex mpssvc C:\Users\Dan>SC

  Service_Name: mpssvc

  TYPE: 20 WIN32_SHARE_PROCESS

  STATE: 1 STOPPED

  WIN32_EXIT_CODE: 1068 (0X42C)

  SERVICE_EXIT_CODE: 0 (0X0)

  CHECKPOINT: 0X0

  WAIT_HINT: 0X0

  PID                : 0

  FLAGS:

  C:\Users\Dan>sc qc mpssvc

  [SC] QueryServiceConfig SUCCESS

  Service_Name: mpssvc

  TYPE: 20 WIN32_SHARE_PROCESS

  STARTUP TYPE: 2 AUTO_START

  ERROR_CONTROL: 1 NORMAL

  BINARY_PATH_NAME: C:\Windows\system32\svchost.exe k LocalServiceNoNe

  network

  LOAD_ORDER_GROUP: NetworkProvider

  TAG                : 0

  Display_name: Windows Firewall

  DEPENDENCIES: mpsdrv

  : bfe

  SERVICE_START_NAME: NT Authority\LocalService
  Help me, please?

  Hello

  I suggest that you follow the steps in troubleshooting provided in the link below to fix the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/cannot-start-Windows-Firewall-Vista/d1d764c7-8978-48da-B1F1-bb3e394a9a2a

• Unable to backup get error 1608 the dependency service or group could not start

  Original title: unable to backup

  1608 the dependency service or group could not start. Task Scheduler does not

  Hi LesComan,

  Follow the suggestions below for a possible solution:

  Method 1: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: I also suggest you temporarily disable the software antivirus (and any other security software) and firewall on the computer and see if that fixes the problem.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

   

  Firewall: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/firewall-frequently-asked-questions

   

  Caution:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Let us know if it helps.

• "The dependency service or group could not start" error

  SERVICE OF DEPENDENCE OR GROUP FAILED TO START

  My computer is really in trouble, because he always tells me that "the dependency service or group could start. I use a vista and cannot connect to the internet more. What can I do?

  Hi DR PEPEREMPE

  
  Do you get the error message when you try to connect to the internet?

  You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to p Ed a SFC Scan -.

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• Connection status: unknown, the dependency service or group could not start

  When I point the cursor on the network connection icon in the task bar is showing the message "Connection status: unknown, the dependency service or group could be started. But I always try to connect to the internet, if show a popup message 'The Wizard Error Message' with an error

  Component GUID: {7071ECA3-663B-4BC1-A1FA-B97F3B917C55}

  Component file: [C:\Windows\system32\connect.dll]

  Error: (0x8007277B)

  Additional information:

  Could not detect Internet connectivity
  If I always neglect the error and try to connect to the internet then system shows a message "The wizard cannot create the connection"...
  I would be grateful if someone could suggest the solution other than restart the system...
  I use windows vista as operating system...

  Hi Gattu,

  Please contact Microsoft Community.

  It would be great if you can answer the following question:

  Were there any changes made on the computer before the show?

  Follow these methods to solve the problem:

  Method 1:

  See the article and check if that helps:

  Network connection problems

  http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-network-connection-problems

  Method 2:

  I suggest you check out the link to use the System File Checker tool (sfc) to troubleshoot missing or corrupted system files in Windows:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  I would also refer to article to reset the Internet Protocol (TCP/IP)and check if it helps.

  Method 4:

  I suggest to disable the antivirus software and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  If you are still experiencing a problem, please reply and we will be happy to help you.

• The dependency service or group could not start

  I have accidentally infected myself with a friends virus. I've deleted successfully, and virus damage was left. The biggest damage that they let me Internet, error, it says. "The dependency service or group could start" and I have internet on all my other computers, but it is said that to my laptop. Could someone help? (YES, I DELETED THE VIRUS)

  Hello

  ·         When exactly do you get this error message?

  ·         You get this error message when connect you to the internet?

  ·         What internet browser do you use? (Specify the browser: Internet Explorer, Firefox, etc.)

  Method 1:

  You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary.

  Follow the steps below to perform a Scan of the SFC.

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow

  
  b. type the following command and press ENTER:

  sfc/scannow

  
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.

  
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.

  
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".

  
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link for more information on CFS below mentioned scan.

  http://support.Microsoft.com/kb/929833

  Method 2:

  I also suggest talk you the following Microsoft KB articles and check if it helps.

  Some services do not start in Windows Vista

  http://support.Microsoft.com/kb/943996

  The problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems