Acrobat failed to load its core DLL...-what it means and how it can be solved.
I tried to open a pdf file in my email, but a pop up says "Acrobat failed to load its core DLL" this is the first time I've ever had this happen. What it means and how to fix it? I tried to download Adobe, but it did not help. I'd appreciate any help. Thank you
Fix from Adobe that they listed for this issue can be found here:
http://helpx.Adobe.com/Acrobat/KB/reader-core-dll-error.html
Tags: Windows
Similar Questions
-
How do I resolve error that "Acrobat failed to load its core DLL?
How do I resolve error that "Acrobat failed to load its core DLL?
I have already tried to remove and reinstall, still get the same error message. I am running Windows 7 and have Norton Antivirus.
http://helpx.Adobe.com/Acrobat/KB/reader-core-dll-error.html
-
I have Windows 8.1, Adobe Acrobat CS6.
When I try to open Acrobat or Reader version I get the error "acrobat could not load the dll base."
I tried a repair, it does not
I tried Malware removal tool tdsskiller, he found nothing. No Malware.
I tried to remove, reboot, reinstall, reboot, and the problem persists.
In the meantime, I am forced to use Microsoft terrible version of a PDF reader because it works.
I want to get all the features of Adobe Acrobat is my back because I need to create PDF files as well as read them.
Hi Kenneth,
Please try to clean to uninstall Acrobat use of the CC cleaning tool to resolve installation problems. CC, CS3 - CS6, restart your computer and then reinstall Acrobat.
Let me know if the problem persists.
Kind regards
Nicos
-
What does "Channel status is not valid" message mean and how it can be solved.
Whenever I have upload documents, "ms security essentials" using any Explorer of the material are downloaded. But when I try to install it, its was not and I get a message "channel status is not valid". What this means and how it might be solved.
Dear Sandeep, thanks for taking the trouble. However, it was too complicated for me. I chose an easy option. I went and restored the system to a much older date. That solved my problem.
Thamnx -
execution of DLLs. Error loading cbbxw.dll. the specified module could not be found. -what it means and how do I get rid of him?
You could have, or still are, infected by malware; and it could also be a starting top left him entry.
Malware scan:
http://www.Malwarebytes.org/MBAM.php
Malwarebytes is as its name suggests, a Malware Remover!
Download the free Version from the link above.
Download, install, upgrade and scan once a fortnight...
How to use Malwarebytes once it is installed and updated:
1. open Malwarebytes > click the update tab at the top > get the latest updates.
2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer
3 MBAM will now start to scan your computer for malware. This process can take some time.
4. when the scan is complete, a message box will appear
5. you must click on the OK button to close the message box and continue the process of Malwareremoval.
6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .
7. a screen showing all of the malware displayed the program that is
8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.
9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.
10. you can now exit the MBAM program.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the error persists after scanning, use the program to out startup:
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.
See you soon.
Mick Murphy - Microsoft partner
-
I get this message at startup ' 3rd Master Hard Disk:S.M.A.R.T. bad condition. " -What this means and how can I solve this problem?
SMART is a technology on newer computers that allows the computer to monitor the health of hard drives in your computer. Something happened to one of your readers that detects the smart as a problem, and she's trying to warn you proactively to this topic before it fails.
It may be also that you have installed a very old hard drive that does not support the CHIP and the monitor reports that it can not read the drive status.
So depending on your level of knowledge and experience, you can watch to replace the hard disk that is reported, or you can disable SMART followed to make the message disappears. The second option but then means if it is really a failure, it is likely any work stoppage or corrupted so data you do note to solve.
-
When I open a PDF and try and connect you to convert the document to word format he said "reader has no ability to access this service" and it doesn't let me move forward. -What this means and how do I continue to Word so I can change the pdf document?
Hi wayned76005641,
You subscription Adobe export to PDF, make sure that you are signed in DC from Adobe Acrobat Reader Adobe - Adobe Acrobat Reader DC Distribution using your Adobe ID to use the service to export it to PDF service The Adobe export in PDF format allows you to convert a PDF to Word, Excel, PowerPoint and RTF formats..
You can also use this online https://cloud.acrobat.com/exportpdf service
Once the PDF is converted .docx file you can edit in MS Word.
Kind regards
Nicos -
Hello! I have download CC and paid $69.99 but I want to use the programs that I pay for, why, if I pay $69.99, I have to use the test programs? you want to know what I pay and how I can get the services of programs I want to use.
Miguelo28272279 for more information on how to solve the connection error preventing your membership to authorize please see sign, activation or connection errors. CS5.5 and later, Acrobat DC. We invite you to update this discussion if you have any questions about the steps listed in the document.
-
For some reason any in my list of Firefox Add-on - it so-called Z 4.6.8.5 arose. It has not added to my list. There is no Remove button to remove, just a button to 'enable '. Anyone know what it is and how I can remove it?
See if this helps you:
http://www.computerpartsgreenvillesc.com/dealing-with-the-z-4-6-7-7-Firefox-extension/
I think your module might be a newer version of the one reviewed in this article. -
I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?
I want to erase the hard drive and use it to install windows xp.
From what I've read, it could be a number of things that went on the wall. Issue of dead hard drive, BIOS, peripheral USB plugged when starting, etc.
Does not help, but could help to point you in the right direction...
-
Recently, when I turn on my computer is starts, guests of the computer and starts check my system files as follows: "checking file system on C: the Type of the file is NTFS. The Volume is dirty. "That is what this means and how can I clean and maintain the clean Volume, please? My computer is Dell XPS
The computer system continues and invite "CHKDSK checks the files (step 1 of 3)... .
The system deletes some files and at the end of shows, complete audit files and then show
CHLDSK is verifying indexes (stage 2 of 3)...
Once again, it shows the following:
Deleting Index Entry _64280 ~ 1. jpg in index file 4632 $130
Deleting Index Entry _64280552_little-mix_211112_get [1] .jpg in index file 4632 $130
Deleting Index Entry 69gw [1] .jpg in index file 6722 $130
Remove entries of Index 69 GW_1 ~ 1. jpg in index file 6722 $130
Deleting Index Entry _64274754_messi_211112_elvis [1] .jpg in index file 6722 $130
Deleting entry Index _64274 ~ 1. jpg in index file 6722 $130
Finished the index checking
CHKDSK is checking security descriptors (stage 3 of 3)...
100%
CHKDSK checks usn Journal...
Windows control disc is finished.
After all checks, Windows proceed to start as usual.
I would like to know if I need the dirty Volume, and if so, how can I carry out the cleaning operation.
Sometimes, at the early stage of the CHKDSK, the computer makes a pe. .. PE... noise and cut. Then I turn the computer off via the key of the insulation. When I restart the computer, it then runs the check again until the end.
Please advice me on the following points:
1 is this normal as he started only happening in recent weeks?
2. How can clean the Volume in order to show "Volume is clean instead of sale"
I look forward to hear from you.
Thank you
Hi, Dr.,
Volumes that contain file system errors are known as Sales. To indicate that a file system problem has occurred and that the volume is dirty, Windows XP Professional displays a message similar to the following when you try to open, delete, or rename a file or folder by using Microsoft Windows Explorer or the command prompt:
Autochk runs if the volume is marked as modified.
If the file system has marked the volume as dirty, Autochk runs the Startup Repair process. Volumes are marked as dirty, when the file system detects an error on the volume. If Autochk detects a dirty volume, it provides a delay of 10 seconds, and then starts the repair process. If you cancel Autochk when a volume is dirty, Autochk tries to run again after a 10 second delay every time the computer is restarted.
See Chkdsk for all the necessary explanations:
http://TechNet.Microsoft.com/en-us/library/bb457122.aspx
Run the Dell Diagnostics to check the drive failure. If the disc is a failure, it must be replaced.
-
When I start my laptop script error on the screen.what that means and how it get rid you
When I start my laptop SCRIPT ERROR comes on my screen. What it means and how to get rid
You have assigned to a category of forum that is completely different to your question/problem. Your question has been moved to a forum category that matches it's better.
If you don't already specify the product name, Windows version, version of the program and other necessary information on the product you have a problem with: do so immediately!
And please explain the problem more in detail. Do not try to give an overall summary abstract with terms invention. Use natural language. Explain step by step what you do and what you see and why it is a problem.
Provide accurate and complete data: exact error message of name, exact product of exact, exact file names, exact address... you get! -
I have a PC with Windows XP SP3... ecentlped recognizing my DVD/CDRW. I tried to download Windows Fixit and when I tried to run, I get the error code 0 x 80092003. -What this means and how can I solve this problem?
HP Pavilion a1410n PC with Windows XP Media Center edition. Sony Optiarc cddvdRW.
Hi J Mbanza,
-What is the link that you used to download the fix tool from?
error 0 x 80092003 which is an error reading or writing to a file.
Try to download from the link below and check.
Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsThank you!
-
I get the following "Windows - no disk Exception Message c0000013 processing error message
Parameters 75b6bf7c 4 75b6b7c 75b6b7c"can someone tell me what this means and how get rid of? Thank you!* UNPLUG ALL USB DEVICES AND NON-ESSENTIAL TO THE COMPUTERIf you can, I suggest that you try the following:
{THE PHASE 1}1. click on START2. click on "all programs".3. click on "Accessories".4. click on "system tools."5. click on "system restore."6 follow the prompts shown to restore your system to a date before the problem started. Although the system restore does not target the personal data, it is recommended that you back up all data such as music, photos and documents in case something is not bad.{THE PHASE 2}If this does not work, I could do this:Reach:Follow the instructions to download the version (diskette) indicated secondary. This will require a floppy disk. If you don't have one available, skip this step. Unfortunantly, given the age of this system, they do not offer executable for use within Windows automatic update.{THE PHASE 3}Reach:Download the patch and install it. Then, restart your computer.Reach:Download the patch and install it. Then, restart your computer.Let us know what happensThank you!Ryan Thieman
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
'Test latency error' what it means and how to fix it.
I've tried to do a test of broadbandspeed and in the attempt, I was told, there was error, namely "latency test. -What it means and how to fix it?
Was it speedtest.net?
If so, this see from their base of knowledge ( https://support.speedtest.net/entries/21544197-What-does-Latency-Test-Error-mean- ):
«"Latency Test error" occurs generally when the server has been temporarily interrupted.» We have a server monitoring group that will be contacted periodically servers to verify that they work correctly, but there may be a slight delay before automatically recognize us that the server is down. Please let us know by filing a support ticket specifically identify which server caused the error and try to test it on another server. »
If it was of speedtest.net, then try another Tester like http://www.zdnet.com/broadband-speedtest/ for example (there well others).
Maybe you are looking for
-
Why iPad is more difficult to clean pro? This is not the screen size. It just won't come clean. I can get my perfect 6Plus.
-
Setup will not be replaced despite the same upgrade code
Hello again, I recently upgraded from LabVIEW 8.5.1 LabVIEW 2010. This exposed the code upgrade to me for the first time in the Installer properties. I have 3 installers for my product. Ideally they would replace each other, but at the moment (or
-
can someone tell me how to stop e-print notifications when a document is printed?
Any help is appreciated
-
Hello How can I Achive go simple connection without permission the higher security level allowed to go to a less secure for example, I have 2 servers and a firewall, I need to open it in the Web of trust Port TCP/5450 so the server outside (untrusted