A track ASA5510 connection

Similar Questions

• iPad/iPhone VPN to ASA5510 connection

  I recently started getting reports of users of the iPad and iPhone that they can get is more the VPN on the SAA. User is iOS8. I don't have the AnyConnect to license activated on the SAA. I've upgraded to the ASA 8.2 (5) 57 that I installed a 3rd root certificate from Entrust. The previous version does not SHA - 2 support. Was - this chance end users were able to connect to the VPN from their mobile devices before the upgrade? If I have to activate the AnyConnect for Mobile license is it a license for each user or a license to cover all users. I have licensed AnyConnect Essentials with total number of Peer VPN for 250. During the trial of one of the iDevices ASDM logs do not indicate even an attempt to connect to the IP address of the device that I find it odd as well.

  A Mobile license must cover all

  http://www.Cisco.com/c/en/us/support/docs/security/Adaptive-Security-app...

  Kind regards

  Sandra

• Unable to connect the path between two components. Blue MultiSIM.

  Hello

  With the help of Multisim blue.

  On the use of ' follow me ' follow-up. When I select a capacitor element then go to connect to U4 as shown in the picture. I can't quite track to connect to U4, as shown in the picture. If I have 1 Select the pad on U4 and move the cursor and no track is visible. It's the way of power supply VCC (net).

  What have I done wrong?

  
  

• Error 'this computer cannot connect to a homegroup. " How can I connect my 2 parts forming a home network?

  I'm trying to connect my pc with my pc upstairs downstairs (both HP pcs. 1pc is Vista, the other is 8.1). Now, I guess I'm on the right track to connect both PC and trying to establish them as a group residential when I get to the page of the homegroup, it reads 'this computer cannot connect to a homegroup' Finally I get 'service Homegroup provider is not running.

  How can I connect my 2 parts forming a home network?

  Thank you DVSMSC I missed it - you have reason. Homegroup is introduced in Windows 7 and works in 8 / 8.1 / 10 also, but not back to Vista.

• Recording connection failure attempts

  Someone at - he found a way to get information about connection attempts that have failed where people enter the wrong username/password name? We use the secure gateway and I enabled database. I looked through the database but couldn't find anything by recording connection attempts that failed.

  Hello

  Unfortunately, vWorkspace do not keep track of connection failures, you need a product that collects this information from the event log and stores them for you to review later as Administrator Active or change auditor for Active Directory.

• iMovie audio issue 10.1.2

  Hey I posted the audio, but there is this small green tab at the head of the audio track that connects him to the head of the video (photo attached). What is this tab for and how to separate it from the video? Thank you.

  

  Each audio title, clip, which is not in the scenario must be connected to the plot. They are called connected clips. The green line represents the connection point to your scenario. You can move around the audio and the connecting line moves with him.

• personalized step description

  When you create a custom step type, what do I enter in the box "Expression of Description step" to display the 'operation' and "track (s) to connect/disconnect" the programmer went into properties of switching tab of each step? This custom is only switching so I don't want to open the Properties dialog box and look at each step to see what is. Thank you, Jason

  Hello Jason,

  In the "Step Description Expression" box you could do something like:

  "Operation:"+ ".

  (
  Step.TS.SwitchEnabled?
  (
  Step.TS.SwitchOperation == 1?
  ' Connect ' + ' |. ' Track (s): "+ Step.TS.RouteGroupConnect:"
  (
  Step.TS.SwitchOperation == 2?
  ' Disconnect ' + ' |. ' Track (s): "+ Step.TS.RouteGroupDisconnect:"
  (
  Step.TS.SwitchOperation is 3?
  "Disconnect all":
  (
  Step.TS.SwitchOperation is 4?
  "Connect/disconnect" + "|" Track (s) Connect: "+ Step.TS.RouteGroupConnect +" | Disconnection of path (s): "+ Step.TS.RouteGroupDisconnect:"
  "Error".

  )
  )
  )
  )
  : 'Not active change.
  )

  It is a little confusing because SwitchOperation is a number that corresponds to an operation, that is why we have the nested conditional statements.

  Let me know if you have any questions.

• Error Protocol in the package received from the initiator

  I have a Windows 2008 R2 virtual machine connected to a PS of the Group (6210xs and 6000). I have 4 volumes iscsi LUNS for Windows data, two on the 6210 and two on the 6000. The vm is on the 6210. We have implemented the 6210 back towards the beginning of the year, and all volumes of data have been implemented with MPIO 5 or 6 months ago.

  This morning, one of the 2 data on the 6210 disappeared. Windows Disk Mgmt did not show it online or offline, but the windows iscsi initiator showed as connected LUNs. I disconnected the lun and reconnected and immediately handed volume online and has been fully accessible. The monitor EQ had a message to info about the disconnect with "error Protocol in the package received from the initiator" at the end of the message. 2 seconds later, the logical unit number reconnected.

  It sounds like a problem with the initiator of windows rather than a problem of EQ, but I thought I'd check here in any case. It is interesting that it happened only to 1 volume of 4. This volume has been connected since May with no problems until today, and I do not have no changes to configuration since May. Are both the vNIC multichannel vmxnet3 with all the same settings (jumbo frames enabled, unloading of the disabled, numbers for Rx rings, etc.)

  Any ideas on all the settings should I check or change, especially with the network cards for?  I'll probably post this on technet, too.

  Thank you.

  Tim

  Hello

  The problem with iSCSI optimization is that it keeps track of connections.  However, the table moves periodically as you have noticed, the connections.  The switch fw does not understand that.  With each stroke he follows the new session and retains the old.   The buffer allocated for it is rather low.  According to FW versions on the switches, this could be as little as 256 connections.  Over time, this buffer is overrun.  The older of the switch that made to block any new connection iSCSI on port 3260.   So turn it off is the best option.

  Re: trunk. In general the ISCSI traffic is burst, so when you look at the history of the traffic it appears wrong, because he gets on average over time.  So, I would add at least two additional ports to be sure.

  Kind regards

  Don

• Dell S2409W HDMI problem

  OK so my monitor was working fine until it as there is when I'm spent HDMI/DVI and return the screen as was carried out as he could feel the single HDMI (the power light was white) but the screen was pitch black, I called tech support and they sent me new-monitor 2 days and 1 hour he had the same prob they send me another monitor, is there a way to prevent this? His challenge not the PS3 or cable because I have hooked up to my Olivia HDTV Bros. and played on it for several hours when I was waiting for the replacement to come, and nothing happened. Everyone knows about it or how to prevent?

  I'm afraid to change the input on the screen replacement replacements in fear of what's happening again :(

  When it appeared, disconnect you the HDMI monitor and reconnect it so that the computer could re - initialize the HDMI?

  So you have the PS3 connected to the HDMI monitor and a computer connected to the DVI monitor at the same time? The next time it happens, let them on track and connected to the monitor. Turn the monitor off. Unplug the monitor power cable. The button of power monitor for 10 seconds. Plug the monitor power cord. Switch to HDMI via the monitor input Source selection button. The PS3 display?

• reading Mp3 error

  Hello

  I just try to add sounds in my game, took example playAudio Ndk samples.

  created two simple ethical methods are the same that in the sample, but still get error could not open source.

  Here is my code

  MySoundPlayer.h

  /*
   * MySoundPLayer.h
   *
   *  Created on: Jul 13, 2012
   *      Author: vivek
   */
  
  #ifndef MYSOUNDPLAYER_H_
  #define MYSOUNDPLAYER_H_
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  #include "types.h"
  #include 
  #include 
  #include 
  #include 
  #include 
  #include 
  
  #if ! defined(DEFAULT_AUDIO_OUT)
      #define DEFAULT_AUDIO_OUT "audio:default"
  #endif
  #define MSG_SIZE 1024
  
  class MySoundPLayer {
  public:
      MySoundPLayer();
  
      bool loadSound(const char * Url);
      void playsound();
      void mmrerror( mmr_context_t *ctxt , char *errorMsg);
      float volume;
      mmr_connection_t *connection;// = NULL;
      mmr_context_t *ctxt;// = NULL;
      char msg[MSG_SIZE];
  
      virtual ~MySoundPLayer();
  };
  
  #endif /* MYSOUNDPLAYER_H_ */
  

  and CPP

  /*
   * MySoundPLayer.cpp
   *
   *  Created on: Jul 13, 2012
   *      Author: vivek
   */
  
  #include "MySoundPLayer.h"
  
  MySoundPLayer::MySoundPLayer() {
      // TODO Auto-generated constructor stub
  
  }
  
  MySoundPLayer::~MySoundPLayer() {
      // TODO Auto-generated destructor stub
  }
  
  bool MySoundPLayer::loadSound(const char * Url) {
  
      const char *ctxt_name = "testplayerr";
      const char *audio_out = "audio:default";
      const char *input_type = "track";
      char cwd[PATH_MAX];
      char inputurl[PATH_MAX];
      int audio_oid; //outputId
      const char *audioout = NULL;
      const char *mmrname = NULL;
      getcwd(cwd, PATH_MAX);
      int rc;
      rc = snprintf(inputurl, PATH_MAX, "file://%s%s", cwd, Url);
      if (rc > PATH_MAX - 1) {
          printf("File name and path too long");
      }
      mode_t mode = S_IRUSR | S_IXUSR;
      strm_dict_t *aoparams = NULL; // output parameters
      audioout = DEFAULT_AUDIO_OUT;
      const char *inputtype = "track";
      if ((connection = mmr_connect(mmrname)) == NULL) {
          snprintf(msg, MSG_SIZE, "mmr_connect: %s", strerror(errno));
          return false;
      } else if ((ctxt = mmr_context_create(connection, ctxt_name, 0, mode))
              == NULL) {
          snprintf(msg, MSG_SIZE, "%s: %s", ctxt_name, strerror(errno));
          return false;
      } else if (audioout
              && (audio_oid = mmr_output_attach(ctxt, audioout, "audio")) < 0) {
          mmrerror(ctxt, msg);
          return false;
      } else if (aoparams && mmr_output_parameters(ctxt, audio_oid, aoparams)) {
          mmrerror(ctxt, msg);
          return false;
      } else if (mmr_input_attach(ctxt, inputurl, inputtype) < 0) {
          mmrerror(ctxt, msg);
          return false;
  
      } else if (mmr_play(ctxt) < 0) {
          return false;
          mmrerror(ctxt, msg);
      }
      printf("Success :%s", msg);
      return true;
  }
  
  void MySoundPLayer::mmrerror(mmr_context_t *ctxt, char *errorMsg) // const char *errmsg )
          {
      const mmr_error_info_t *err = mmr_error_info(ctxt);
      unsigned errcode = err->error_code;
      //char errorMsg [1024];
      switch (errcode) {
      case MMR_ERROR_NONE:
          sprintf(errorMsg, "No error", "%s");
          break;
      case MMR_ERROR_UNKNOWN:
          sprintf(errorMsg, "unKnown error", "%s");
          break;
      case MMR_ERROR_INVALID_PARAMETER:
          sprintf(errorMsg, "invalid parameters", "%s");
          break;
      case MMR_ERROR_INVALID_STATE:
          sprintf(errorMsg,
                  "An attempt to play or seek while there's no input attached or to talk to the context after it's been destroyed",
                  "%s");
          break;
      case MMR_ERROR_UNSUPPORTED_VALUE:
          sprintf(errorMsg,
                  "Input or output type not recognized by any plugin Speed out of range",
                  "%s");
          break;
      case MMR_ERROR_UNSUPPORTED_MEDIA_TYPE:
          sprintf(errorMsg, "No plugin recognized data format", "%s");
          break;
      case MMR_ERROR_MEDIA_PROTECTED:
          sprintf(errorMsg,
                  " The media format was recognized but file is DRM-protected and either uses an unsupported DRM scheme or the reason for failure is not one of the specific DRM errors listed below",
                  "%s");
          break;
      case MMR_ERROR_UNSUPPORTED_OPERATION:
          sprintf(errorMsg,
                  "A seek or set speed call with media that doesn't support it  Attach/detach output with a plugin that doesn't support it",
                  "%s");
          break;
      case MMR_ERROR_READ:
          sprintf(errorMsg, " I/O error at source", "%s");
          break;
      case MMR_ERROR_WRITE:
          sprintf(errorMsg, " I/O error at sink", "%s");
          break;
      case MMR_ERROR_MEDIA_UNAVAILABLE:
          sprintf(errorMsg, "Can't open source", "%s");
          break;
      case MMR_ERROR_MEDIA_CORRUPTED:
          sprintf(errorMsg, "Media currepted", "%s");
          break;
      case MMR_ERROR_OUTPUT_UNAVAILABLE:
          sprintf(errorMsg,
                  "Can't open sink (possibly because no plugin recognizes it)",
                  "%s");
          break;
      case MMR_ERROR_NO_MEMORY:
      case MMR_ERROR_RESOURCE_UNAVAILABLE:
          sprintf(errorMsg, "No Memory or res unAvaiable", "%s");
          break;
      case MMR_ERROR_MEDIA_DRM_NO_RIGHTS:
          sprintf(errorMsg, "No rights to play the file", "%s");
          break;
      case MMR_ERROR_MEDIA_DRM_OUTPUT_PROTECTION:
          sprintf(errorMsg, " DRM output protection mismatch", "%s");
          break;
      case MMR_ERROR_DRM_CORRUPTED_DATA_STORE:
          sprintf(errorMsg, " DRM data store is corrupted", "%s");
          break;
      }
  }
  

  with this, I added my wav and Mp3 files in assets in handle bar, check the playsound

  and make the added files

  # Basic libraries required by most native applications
  LIBS+=bps screen mmrndclient strm
  

  but still getting the error "cannot open source." my error decoding box switch, it will. "

  MMR_ERROR_MEDIA_UNAVAILABLE
  

  What stage is wrong, or I forgot to add something.

  can someone point out a wrapper class to play sounds on the playbook.

  or can I use open AL to play sounds. If OpenAl can b used to please please post a simple or a link to that

  also attached source.

  You're going to get when you see the solution, change:

  rc = snprintf(inputurl, PATH_MAX, "file://%s%s", cwd, Url)
  

  TO

  rc = snprintf(inputurl, PATH_MAX, "file://%s/%s", cwd, Url)
  

  or change

  if( mplayer->loadSound("app/native/farewell.mp3"))
  

  TO

  if( mplayer->loadSound("/app/native/farewell.mp3"))
  

  I just had the same problem.

• MultiCam: Both cameras / Audio two

  Hey,.

  I have two camera so that when used to film two separate shots and have two audio tracks separate, and they have a vocal track which is completely separate. The audio tracks are connected to the video channels, record audio and video for camera even and I want to change that to multicam Premiere Pro, but I don't want to mix the two audio tracks. I want to use the two audio tracks and I want to use the audio track that corresponds with the video I'm trying to change.

  So, if I'm a view camera 1, I hear the camera a audio, and if I display camera 2, I have camera hearing two is audio. Is this possible in Premiere Pro? Or y at - it an easier way to do this kind of thing. Premiere Pro 9.0 2015 CC passing

  When several cameras, under the key of the program monitor, see multi Audio video camera follows.

• ClientID

  Is there a way to set the clientId in the connection string?

  N ° it goes against most of the benefits of the use of the customer ID or connection pooling. Once you change an attribute value in a connection pool, a new connection pool is created (with the exception of some attributes of proxy authentication). Thus, you lose the benefits of connection pooling. If you keep the value of the ID of the Client that is the same all the time, there is no advantage to using it.

  Customer ID allows you to uniquely identify connections while having all the advantages of performance and scalability of a connection pool. You have the possibility of setting and resetting the customer ID when you want for the duration of the connection to keep track of connections for any purpose.

• Cannot get audio mic in PP CS5.5

  I'm trying to get the PP to record sound from a microphone. All entered record, including monitors audio studio and bounce internal audio meters from the mac, but nothing registers in PP. Here is the configuration:

  Shure SM58 dbx microphone preamp in. dbx on M-AUDIO Fast Track Pro xlr xlr plug XLR to xlr.

  Fast Track Pro connected to the mac pro via USB (directly, without hub)

  Studio monitors are Fast Track Pro runoff through ball. lines 1/4.

  Prefs Pro Prem audio material is set on Fast track pro

  Prem Pro Mixer audio microphone enabled on the two track.

  It's the audio except Prem Pro. the counters are dead.

  I was thinking about running asymmetric RCA Red/White audio output of the MA Fast Track Pro for the inputs of analog cable in small groups on the intensity of Black Magic Pro Mac Pro internal card and see if that would work. Thought he had something to do with the Fast Track Pro is connected by USB.

  Final Cut Pro 7 records the audio mic, but it has been end-of-life, so won't use it for any position.

  Thanks in advance for any help.

  J.

  I'm going to make detailed notes on this with screenshots. I do and publish it on our internal help system. I'll also post here and in the documentation PP tech for other online comments former expatriate FCP.

  Thanks for that! We need people like you who are able to speak both languages

  Python! Nice

• Disco Viewer / + / Admin/Desktop-Error Invalid Username and Password

  Hi all
  We have set up a demo environment at work to upgrade to R12 with Vision database. Admin of discoverer is patched to this level: 10.1.2.2 (#4960210 path) with EBS patch 5985072. Enforcement agents on the linux machine that runs server discoverer is patched with same 10.1.2.2 as well. Client and server are on the same level. I followed 373634.1 Note - using discoverer 10.1.2 with Oracle E-Business Suite Release 12 to integrate the discoverer 10.1.2 with E-Business Suite Release 12 and copied in the file vis.dbc to the client (C:\oracle\BIToolHome_01\secure) and also copied the same file in $BI_ORACLE_HOME/discoverer/secure folders. So far so good. I can connect to disco more/admin/Office using sysadmin or other users sent off box with instance R12 SCREWS. A EUL_US of default applications exist with some industry and workbooks. I can run without any problem.
  
  My problem is all DNF users I create cannot connect through more/desktop/admin. I get the error ID / password is not valid. I can connect with this new user applications without problem. I see this discoverer user when logged in as a SYSADMIN and I got all the necessary privileges (admin as well). Also, any user supplied SCREWS if put to day pending (liability added or changed password) no longer works and get the same error.
  
  What could go wrong?
  
  I look at this thread and did everything that was suggested by Michael and Rod West.
  
  Discoverer and the connection has failed
  
  Thank you
  Bismi

  Hello

  Check if there is any what code access system profile options together. For example, passwords are case-sensitive in system profiles can cause a problem because the discoverer does not support.

  Also try to track of connection with Discoverer Desktop to see what extent progresses it attempt to connect. Follow Metalink Note 329898.1 for instructions.

  Rod West

• IPhone lost 6. the batery was about to die. If the phone does not connect to internet. is there a way to keep track of its location?

  IPhone lost 6. batery about to dye, it is not connected to the internet. Im trying to track its location by FIND MY IPHONE, but seems to be offline.

  I'll be able to track its location? or y at - it another way to track its location?

  No, you won't. There is no other way or the other. The only way to find my iPhone to work is if it has been activated prior to the loss, the device is on and it has an active connection to the internet. If one who does not exist, you cannot follow the device. As you say the battery was almost dead, then he's probably already dead. You will not be able to track the device.